Tender For special Repair To Bldg No-16 Of (Kailashkot/Nandkot) Of annual repair And Rc At Nainital Under Ge Ranikhet
Tender Value
24.99 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
15 days left
EMD
48700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nainital → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No-16 Of (Kailashkot/Nandkot) Of annual repair And Rc At Nainital Under Ge Ranikhet
BOQ
| Sl. No. | Item Description |
| 1 | S&F prepainted aluminium zinc steel sheet (galvalume base) or thinknee 0.50mm having tensile strength of 550 MPA , in colour and profile as apporved by GE and to be facotry moulded as in roof covering /cladding and fixed with hot dipped galvanished with high durable protective triple coated self tapping screws /self drilling serews, to suit the roofing in customized colour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity including Dismantling old plain or corrugated steel sheeting, any gauge, thickness as in roof coverings.complete all as specified |
| 2 | S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screws including Dismantling old plain or corrugated steel sheeting, any gauge, thickness as in roof coverings.complete all as specified |
| 3 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 4 | Dismantling of timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and directed. |
| 5 | M&L for 25mm 2nd class hardwood Boarding, supplied & fixed with nails in any situation (except flooring and skirting) |
| 6 | Fixing only second class hardwood boarding of any thickness complete all as specified and directed. ( Note :- Old boarding shall be obtaind from item No __02 above) |
| 7 | M&L for second class hardwood (wrought) in scantling for woodn truss and boarding complete as specified and directed |
| 8 | Fixing only second class hardwood (wrought) in scantling for woodn truss and boarding complete as specified and directed ( Note :- Timber shall be obtaind from item No -03 above) |
| 9 | Dismantling floor, hearth , wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises |
| 10 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. all as specified and as directed |
| 11 | M&L Virified tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and hite or coloured cement to match in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match as in floor etc , all as specified. |
| 12 | -ditto- all as per item ser No …. above here-in-before but in skirting/dado or verticle surfaces with back coat of screed bed or bedding layer of 10 mm thick 1:4 and pointed in white or coloured cement to match complete all as specified. |
| 13 | M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified. |
| 14 | M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 350 x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with backcoat of screed bed or bedding layer 10mm thick 1:4 and pointed in white or coloured cement to match complete all as specified.. |
| 15 | Demolition of brick/PCC block work built in cement mortar all as specified |
| 16 | Material & Labour for brick/PCC block work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 17 | Dismantling of ceiling boards (fibre, pulp, insulation, etc.) any thickness, including cover fillets and Supply & fixing of powder coated GI snap grid frame work for false ceiling comprising of the following sections for making partitions of 605x605 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 2mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 37mmx24mmx0.3 mm thick , cross tee shall be 28mmx24mmx0.3mm thick and wall angle shall be 24mmx24mmx0.3 mm thick including Supply & fixing 4mm thick non asbestos E-board classic cememt building board for insulation and accoustic purpose, 600 x 600 mm size fixed with staples on snap grid as in ceiling complete all as specified and directed.complete all as specified and directed. |
| 18 | Supply & fixing pvc panelling made up of pvc hollow panels 25/30cm in width and 10mm thickness interlocking pattern of approved shed and design,fixed to wall or ceilling all as per the manufacturer instruction,fixed in repair complete all as specified and directed. |
| 19 | Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete.. |
| 20 | Supply and Fixed Pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges ,lock stike plate etc, size 105 X 60 mm complete as specified. |
| 21 | M&L providing cement concrete (1:3:6) type C1 for filling in pressed steel frames and other similar items etc complete. |
| 22 | S&F 30mm thick Flush shutters with/without peephole, solid core construction, with block board core and plywood face panels, commercial type on both sides, both face are covered with decorative face veneer with lipping/frame to match and |
| 23 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin VC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 24 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 25 | S & F 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed all as specified and directed. |
| 26 | S & F 250 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed |
| 27 | S&F 150 mm long Extruded brass handles, fabricated type polished |
| 28 | S&F in repair 150 mm floor door stopper of brass body and tonuge ,anodised, with hard drawn steel spring fixed in floor. |
| 29 | Supply & fixing Butt hinges, extruded brass, with mild steel hinge pin, bright pol ished and fixed, type B-11 of 100mm long complete all as specified and directed. |
| 30 | S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 31 | Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete. |
| 32 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each |
| 33 | (B) Area exceeding 2.00 sqm each → |
| 34 | Providing and fixing factory made uPVC white colour fixed window made of extruded profiles with wallthickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket.1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.)(A) Area not exceeding 1.00 sqm each → |
| 35 | supply only 5.5 mm thick Sheet glass, selected quality, in squares exc. 0.5 sq. m each pane complete all as specified and directed. |
| 36 | Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, including Taking down old GI water Tubing, complete all as specified and as directed. |
| 37 | S&F in repair 15mm dia bib taps, fancy type long body chromium plated cast copper alloy with crutch or butterfly handle complete all as specified and directed. |
| 38 | S&F in repair Brass CP Wall mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified . |
| 39 | S&F in repair vanity cabinet with wash basin Owing to the high quality HDHMR Board with a gloss finish table top of size 600mm x 450mm x 150mm,any shape and colour including PVC waste pipe 32mm dia, single lever basin mixture ,waste coupling brass chromium plated complete all as specified and directed. |
| 40 | S&F in repair CP over head shower square shape of size 150x150mm of make Jaquar cat part No OHS-CHR-1619 with CP shower arm of size 400x25x25 mn Square shape for wall mounted showers flange of make Jaquar Cat partNo-SHA-455L400 or equivalent in Hindware/Prayag/Parryware complete all as specified and directed. |
| 41 | Supply& Fixing Soap Dish CP Brass complete all as specified & directed by Engr-in-Charge |
| 42 | S&F toilet paper holder with flat recessed type stainless steel complete all as specified and as directed |
| 43 | Supply & Fixing Glass Shelf 300mm (with ABS Brackets) 300 x 600mm complete all as specified & directed. |
| 44 | Supply& Fixing tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges all as specified. |
| 45 | S&F in repair Vitreous China EWC single peace with UF Soft Close Slim Seat Cover, Fixing Accessories, Accessories set and Cistern Fittings, Size: 370x670x720 mm, S /P Trap-300mm complete of make Jaguar Cat Part No:- LYS-WHT-38851PSM series or equivalent in Cera/Parryware/Hindware complete all as specified and directed. |
| 46 | Supply & fix in repair 15 mm bore Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 47 | Supply & fix Towel rack 600mm long with lower hangers, stainless steel of make Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Prayag/Parryware complete all as specified and directed. |
| 48 | S&F in repair Angle Cock,15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 49 | S& F in repair 600x 450mm beveled edge mirror or selected quality glass mounted on 6mm thick AC bldg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers. |
| 50 | S & F in repair Stainless Steel grating 100mm dia complete all as specified. |
| 51 | S&F in repair PVC Connections 600mm long complete all as specified. |
| 52 | Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc and Material and labour for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) including Preparing newly plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over any surfaces. Makes :- Nerolac -Excel, Asian - Apex, Berger - Weather coat antidust, Dulux - Weather shield. |
| 53 | Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc and M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair without using extra cement including M&L for Preparing newly plastered surfaces and applying two coat of oil bound distemper over a coat of primer to wall to complete all as specified and as directed, |
| 54 | M&L for preparing new wooden surface and applying two coats of synthetic eneamel painting over a coat of pink primer on new wooden surfaces exc 10 cm width or girth including preparation of surfaces complete. |
| 55 | M&L for one coat of synthetic enamel paint to old decorated wooden surfaces of girth exc 10 cm including preparation of surface complete |
| 56 | M&L for complete removal of existing surface including providing and applying minimum 1mm thick wall care putty over prepared surface and rubbing it with mechanical sander (having mechanical vaccum mechanism) to achive the surface even and smooth for further application of finishes and applying two coats of oil bound distemper over a coat of primer to wall to complete all as specified and as directed, |
| 57 | M&L for complete removal of existing surface including providing and applying minimum 1mm thick wall care putty over prepared surface and rubbing it with mechanical sander (having mechanical vaccum mechanism) to achive the surface even and smooth for further application of finishes and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over any surfaces. Makes :- Nerolac -Excel, Asian - Apex, Berger - Weather coat antidust, Dulux - Weather shield. |
| 58 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) and S&F Mild steel sheet eaves gutters thickness of sheet 1 mm and dia 100mm, galvanised class 3, half round with rounded edge including brackets, heads, shoes etc complete all as specified and directed by Engineer-in-Charge. |
| 59 | S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or on walls etc complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F 110mm PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge. |
| 61 | Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level). |
| 62 | M&L for 75mm Cement concrete Type C-2 1:3:6 (40mm graded aggregate) for plinth protection complete all as specified and directed by Engineer -in-Charge. |
| 63 | Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cu. m, getting out, in any type of soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 64 | M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 65 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 66 | S&F 10mm thick Toughned glass as in Railing, hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required. |
| 67 | M&L for Vitrified Parking tiles thickness not less than 10 mm light/ dark shade (square/ rectangular) heavy duty polished, area of each tiles n exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and white or coloured cement to match not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over with and including screed bed of 15 mm thick in CM 1:4 and pointed in white or coloured cement to match as in floor etc complete all as specified and directed.(Make : Orientbell, Kajaria, Somany) |
| 68 | Dismantling water tanks of capacity exc 500 but n.exc 1000ltrs and Supply & Fixing rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity with and including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 69 | Taking down carefully aluminium/copper wiring of any size (for light, fan, socket or power etc complete) including fixture and fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc and making good disturbed surfaces of wall, roof etc to match with existing surface. |
| 70 | Supply & Fixing point wiring for modular fitting for one light point/ fan (independent) point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and modular metal flush box or mounting fittings like modular switches, sockets & fan regulators etc including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed Note:- wiring shall be done in colour coding as directed by Engineer in charge. |
| 71 | All as per item No.2 herein before but one socket outlet 5 Amps on the same board. |
| 72 | All as per item No.2 herein before but one 3 pin socket outlet 5 Amps independent. |
| 73 | All as per item No.2 herein before but one bell point controlled by one bell push switch. |
| 74 | All as per item No. 2 above but with 2.5 Sq mm two single core and 2.5 Sq mm one single core as earth wire for 5/15 Amps socket. |
| 75 | Supply & Fixing lamp holder (modular type) PVC insulated body with back plate for angle/battern fitting complete all as specified and directed. |
| 76 | S&F bell push Modular type, one way 6 Amp complete all as specified and directed. |
| 77 | S&F modular switch 6 Amp one way switch, 1 module complete all as specified and directed. |
| 78 | S&F modular socket 6 Amp 2/3 Pin combined socket shuttered, 2 module complete all as specified and directed. |
| 79 | S&F modular switch 1 way 16 Amp, 1 module complete all as specified and directed. |
| 80 | S&F modular socket 6A/ 16Amp, 2/3 pin combined, 2 module complete all as specified and directed. |
| 81 | S&F modular white cover plate with frame 2 Module complete all as specified and directed. |
| 82 | S&F modular white cover plate with frame 3 Module complete all as specified and directed. |
| 83 | S&F modular white cover plate with frame 4 Module complete all as specified and directed. |
| 84 | S&F modular white cover plate with frame 6 Module complete all as specified and directed. |
| 85 | S&F modular white cover plate with frame 8 Module complete all as specified and directed. |
| 86 | S&F anodised rust proof 18 SWG MS modular metal flush box,1/2 Module complete all as specified and directed. |
| 87 | S&F anodised rust proof 18 SWG MS modular metal flush box, 3 Module complete all as specified and directed. |
| 88 | S&F anodised rust proof 18 SWG MS modular metal flush box, 4 Module complete all as specified and directed. |
| 89 | S&F anodised rust proof 18 SWG MS modular metal flush box, 6 Module complete all as specified and directed. |
| 90 | S&F anodised rust proof 18 SWG MS modular metal flush box, 8 Module complete all as specified and directed. |
| 91 | Supply and fixing bell AC 230 volts, 50 Hz Single pole |
| 92 | S&F ceiling rose surface bakelite 3 terminal with base plate. |
| 93 | Material and labour for Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 6 sqmm, one run of 6 sqmm and one run of PVC conduit will be measured as one unit ie one running metre” |
| 94 | Supply and fixing LED lights fitting 1x 20W (warm/milky white as required on site), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and life of tube light not less than 50,000 hours.complete all as specified and directed.. |
| 95 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible opper conductor cable of suitable size complete all as specified and directed.. |
| 96 | Supply & Fixing sheet metal enclosure for DBs(double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed . |
| 97 | Supply & Fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed . |
| 98 | Supply & Fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single pole 5 to 32 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed . |
| 99 | S & Fixing LED Bulb 9 watt all as specified and directed by Engr-in-Charge. |
| 100 | S & F exhaust fan made of sturdy Engineering plastic type ISI Mark, copper winding of sweep 250 mm size complete with louvers including cutting opening through brick/stone /PCC block wall, making of holes and grouting of suitable size of nuts and bolts for 300 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accessories complete all as specified and directed. |
| 101 | S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size with complete all as specified and directed. |
| 102 | Supply and fix water heater storage type electric supplied and installed complete steel body and heating element upto 2 KW of capacity 25 ltrs, BEE 5 Star rated including making connection with industrical socket, ultra thick SS inner tank of superior 304 grade, Fire retardant ISI Mark supply cord, Rust & shock proof ABS body, Compact & easy to install and proper hanging on nut bolts washers grouted on wall and PVC pipe for connection of hot and cold water complete all as specified and directed by Engr-in-charge. |
| 103 | M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross section area 16 Sqmm 4.00 core laid in trenches or passing through pipes/ducts and incl the disturbence surface of road making good with using PCC complete all as specified and directed. Including taking down old LT U/G Cable from trenches/protection pipe etc complete. |
| 104 | Excavation in trenches not exceeding 1.5 mtr wide, depth exceeding 1.5 mtr and getting out in hard/dense soil complete all as specified and directed by Engineer-in-charge |
| 105 | Returning, filling incl spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil all as specified and directed. |
| 106 | Removing excavated material (soil) not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 107 | M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed.. Note :- Thickness of sand cushioning shall be measured after punning. |
| 108 | Supply and fix unreinforced PCC cable cover class LV type I of size 0.25x0.15x0.04mm |
| 109 | Supply and Fixing steel tube Light grade galvanised 50 mm bore with all fittings for protection of UG cable under road/culvert and fixing on wall with saddle, screw complete all as specified and directed. |
| 110 | M&L for Earthing complete with galvanized sheet earth plate electrodes 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2. 25mtr deep below ground level) with top edge of plat not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts , check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI Strip from earth electrodepanel box, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 6 mm dia TMT bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh,20 mm dia GI pipe light grade for watering and connected to panel box and testing complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender