Tender For Provision Of Equipment Bay And Storage Room For Tools At Nai, Nagpur
Tender Value
23.76 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
16 days left
EMD
47600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Equipment Bay And Storage Room For Tools At Nai, Nagpur
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified & directed . |
| 2 | Excavating in soft/loose soil in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation etc or for shafts,wells,cesspits,manholes ,pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out complete all as specified & directed . |
| 3 | Excavation in trenches exc. 1.50 m but n.exc. 3.00 mtr in depth and n.exc. 1.50 m wide in hard/ dense soil for drain pipes, manholes etc. complete all as specified & directed . |
| 4 | Material and labour Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete all as specified and directed . |
| 5 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm. complete all as specified & directed . |
| 6 | Removing excavated material n exc 50 m and depositng where directed at a level n exc 1.5 m above the starting points complete all as specified & directed . |
| 7 | Material and labour for Moorum/red bajri filling in floors or paving, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering etc complete all as specified & directed . |
| 8 | Material and labour for Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surface etc complete all as specified & directed . |
| 9 | Material and labour for RCC in M 25 ( 20 mm graded aggregate) for foundation including rafts, footings, foundation beams; plinth beams; bases for columns, etc, etc complete all as specified & directed . |
| 10 | Material and labour for RCC in M 25 ( 20 mm graded aggregate) for Columns, pillars, piers, posts & struts etc complete all as specified & directed . |
| 11 | Material and labour for RCC in M25 (20 mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5 m span etc complete all as specified & directed . |
| 12 | Material and labour for RCC in M25 (20 mm graded aggregate) for chajjas complete all as specified & directed . |
| 13 | Material and labour for RCC in M25 (20 mm graded aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified & directed . |
| 14 | Material and labour for Precast RCC 1:2:4 type B1 as in manhole covers including form work set in CM 1:6 etc complete all as specified & directed . |
| 15 | Material and labour for TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete all as specified & directed . |
| 16 | All as per item no. 15 above but 5 mm dia and over utp and including 10 mm dia TMT bar in stirrups, spacers and binders, complete all as specified & directed . |
| 17 | Supply and fix Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified & directed . |
| 18 | Material and labour for Flat Form work to sides of rough finished surfaces of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams: and similar work; vertical or to batter complete all as specified & directed . |
| 19 | Material and labour for Form work to sides of rough finished surfaces of pillars posts, struts, piers, columns & stanchions square rectangular or polygonal fair finished surfaces in shape complete all as specified & directed . |
| 20 | Material and labour for Flat Form work to sides rough finished surfaces of and soffits of floors or roof beams, beam haunchings, girders, bressummers, lintels cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc complete all as specified & directed . |
| 21 | Material and labour for Flat fair finished surfaces Form work to soffits of suspended slab such as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etc complete all as specified & directed . |
| 22 | Material and labour for Formwork to edges of rough finished surfaces of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified & directed . |
| 23 | Material and labour for Formwork to soffits of suspen ded slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified & directed . |
| 24 | Material and labour for old size Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6. complete all as specified & directed . |
| 25 | Material and labour for old size Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified & directed . |
| 26 | Material and labour for PCC B-1, 1:2:4 using (20mm graded aggregate) as in copings, cills complete all as specified & directed . |
| 27 | Material and labour for providing PCC 1:3:6, type C2 (using 40 mm graded aggregate), 75 mm thick, finishing cement concrete surfaces even and fair without using extra cement, as in plinth protection, path etc including necessary form work and provision of bituminous joints mixed with bitumen and sand at intervals not exc 3.00mtr complete all as specified & directed . |
| 28 | Supply only integral waterproofing compound complete all as specified & directed . |
| 29 | Material and labour for factory made machine pressed rubble moulded precast conctete interlocking paver block any shape and size with grey cement and pigments confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 40 mm thick stone dust cousioning complete all as specified & directed. |
| 30 | Material and labour for cement concrete type D-2, 1:4:8 (40 mm graded agg.) 100 mm thick as sub base in foundation etc complete all as specified & directed . |
| 31 | Material and labour for Cement concrete type B-0, 1:2:4 (12.5 mm graded agg.) 40 mm thick as in floors complete all as specified & directed . |
| 32 | Material and labour for Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified & directed . |
| 33 | Material and labour for rendering 15 mm thick in CM 1:4 with water proofing compound @ 3 % by weight of cement, finished even and smooth without using extra cement (WPC shall be measured and paid separately) complete all as specified & directed . |
| 34 | Material and labour for Rendering 5 mm thick on fair faces of brick or concrete surfaces with in CM 1:3 on ceilling finished even and smooth complete all as specified & directed . |
| 35 | Material and labour for Rendering 15 mm thick on fair faces of brick work or concrete surfaces with in CM 1:6 is to be finished even & smooth (without using extra cement) wall complete all as specified & directed . |
| 36 | Supply and Fixing tinted glass of selected quality, 5mm thick , and glazing with aluminium beading in aluminium door and window shutters complete all as specified & directed . |
| 37 | Supply and Fixing Floor door stopper of brass body and tounge with hard drawn steel spring with over all length of cover plate is 150mm complete all as specified & directed . |
| 38 | Material and labour for machine cut kota stone flooring 20-25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and making 2 nos of 3mm thick grooves on edge of treads of staircase etc complete all as specified & directed . |
| 39 | Material and labour for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10mm thick backing coat in cement complete all as specified & directed . |
| 40 | Material and labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & directed . |
| 41 | Material and Labour for 10 mm thick in CM 1:3 screed bed or bedding layer of mortar for laying wall tiles or vertical surfaces (skirting/ dado etc). complete all as specified & directed . |
| 42 | Material and labour for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified & directed . |
| 43 | Supply and fixing of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 44 | Material and labour for preparing newly plastered surfaces and applying three coats of white wash on Wall complete all as specified and directed. |
| 45 | All as per item No 44 above but three coats of white wash on ceiling. |
| 46 | Material and labour for preparing new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed . |
| 47 | Material and labour for applying two coats of cement based paint over a coat of alkali resistant primer over newly plastered wall surfaces after necessary preparation complete all as specified & directed . |
| 48 | Supply and Fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and as specified and directed. |
| 49 | Supply and Fixing solid PVC door frame of size 50 mm x 47 mm made out or 5 mm printed PVC sheet reinforced with M.S. Square tube & edges painted to match with printed sheet all as specified and directed. |
| 50 | Supply and Fixing factory made solid panel pvc door shutter 30 mm thick (Style) consisting of frame made out of M.S. frame shall be covered with heat moulded printed PVC 'C' chanel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side and gap insert for top rail & bottom rail, panelling of wood grain printed sheet & 5 mm thick x 15 mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10 mm x 10 mm (90 degree) , all as per specification & drawing all as specified and directed. |
| 51 | Material and labour for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. all as per manufacturer’s instructions and as directed and Including two coats of oil bound distemper over a coat of putty complete all as specified & directed . |
| 52 | Supply and Fixing fancy Angle cock 15mm bore fancy type chromium (concealed type) complete all as specified & directed . |
| 53 | Supply and Fixing fancy Stop cock 15mm bore fancy type chromium plated with long shank and cup (concealed type) complete all as specified & directed . |
| 54 | Supply and Fixing Brass chromium plated Towel Rail D 20mm dia Type 60 cm long between flanges complete all as specified & directed . |
| 55 | Supply and Fixing 10 litres capacity PVC valveless, syphonic action type, slim body fancy flushing cistern, low level, white, with inlet valve, float valve and handle including removal of old one complete all as specified & directed . |
| 56 | Supply and fixing vitreous china wash down water closet, pedastal pattern (EWC) white with 'P' or 'S' trap, fixing bolts and PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete making good to floor complete all as specified & directed . |
| 57 | Supply and Fixing flush pipe of polythelene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified & directed . |
| 58 | Supply and Fixing PVC connection 25 mm size with PTMT nuts of length 450 mm including taking down old one complete all as specified & directed . |
| 59 | Supply and fixing , in repair Vitreous China wash basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling , brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm from stop valve etc complete all as specified and directed |
| 60 | Supply and Fixing PVC, 32 mm dia, polythelene of low density of pressure raing 4 KG/cm2 fixed completely to wall/floor for wash hand basin complete all as specified & directed . |
| 61 | Supply and Fixing 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed . |
| 62 | Supply and Fixing Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified & directed . |
| 63 | Supply and Fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed . |
| 64 | Supply and fix 15mm dia 2 way Bib cock cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair complete all as specified & directed . |
| 65 | Supply and Fixing 15 mm bore steel water tubing, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified & directed . |
| 66 | All as per item No 65 above but 20 mm bore |
| 67 | Supply and Fixing GI water tubes of bore 25 mm dia tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed . |
| 68 | Supply and Fixing rotational moulded poly-ethylene water storage tanks (ISI marked) (cylinderical vertical with closed top) 500 litres capacity, hoisted and fixed in position complete all as specified & directed . |
| 69 | Supply and Fixing in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm-210 g . /25mm-455g/ 40mm - 690 g) complete all as specified & directed . |
| 70 | Supply and Fixing IInd class HW plain solid, straight ,chowkats and frame, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified & directed . |
| 71 | Supply and Fixing mild steel flat iron hold fast including bolts conforming to Fe-290 Gde-E-165 complete all as specified & directed . |
| 72 | Material and labour for providing plain cement concrete 1:3:6 type C1 using 20mm graded aggregates for fixing hold fast and making good to disturbed surfaces complete all as specified & directed . |
| 73 | Material and labour for bees wax polishing to the new wood work including knotting preparing the surface , scaffolding etc, complete all as specified & directed . |
| 74 | Material and labour for 3.50- 4mm thick veneer finish wall paneling made out of 50x25mm (finish size) C.C.T.W. frame work or size 600x600mm center to centre or as per site condition covered by 12mm thick marine plywood of the generally confirming to IS 710-1980 finished with 3.50 to 4mm thick matching veneer of approved colour and in satin wallnut groov matched veneer pattern and design including melamine polishing and design with antitermite treatment etc.to plywood and woodwork with ten years guarntee bond etc. including all lead and lifts complete all as specified and directed. |
| 75 | Supply and fixing IInd class hardwood glazed and skeleton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc with sash bar divided into sqms edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass or gauze etc complete all as specified & directed . |
| 76 | Supply and Fixing sheet glass ordinary quality 3mm thick with oil putty not exceeding 0.5 Sqm in each pane complete all as specified & directed . |
| 77 | Supply and Fixing butt hinge, medium weight ,cold rolled mild steel 100mm long complete all as specified & directed . |
| 78 | All as per item No 77 above but 75mm long. |
| 79 | Supply and Fixing floor door stopper of aluminium alloy body and tongue anodised with rubber shoe of size 150 mm complete all as specified & directed . |
| 80 | Supply and Fixing aluminium anodised barred tower bolt of extruded section 200 mm long and fixed complete all as specified & directed . |
| 81 | Supply and Fixing extruded aluminium alloy handle fabricated type anodised 150 mm long complete all as specified & directed . |
| 82 | Material and labour for preparing new surfaces of wood of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed . |
| 83 | Supply and Fixing 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete all as specified and directed. |
| 84 | Material & labour for 200mm bore reinforced concrete pipes ,class NP2 ,laid and jointed complete with collars complete all as specified and directed. |
| 85 | Material and labour for plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate in foundation for manholes & drains complete all as specified and directed. |
| 86 | Material and labour for concrete bed in P.C.C ( 1:4:8), type D-2 (using 40mm graded aggregate ) to drain pipes including packing under and haunching against the sides of the pipes after laying & testing for any dia pipes. complete all as specified & directed . |
| 87 | Material and labour for Brickwork with fly ash bricks in 1:4 CM in one brick thick honey-comb walling, built in all as specified and directed. |
| 88 | Hand packing Broken stone or Boulder (any thickness) at back of walls over arches etc and raising (or lowering) to the required level, complete all as specified & directed . |
| 89 | Supply and Fixing PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement complete all as specified & directed . |
| 90 | Supply and Fixing PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed . |
| 91 | Supply and Fixing PVC (SWR) pipes single socketed, 110 mm dia in any length with rubber ring joints, laid in trenches or in floors, complete all as specified & directed . |
| 92 | Supply and Fixing PVC (SWR) bends any radius 110mm bore complete all as specified & directed . |
| 93 | Supply and Fixing 110mm PVC (SWR) WC connector with lip ring complete all as specified & directed . |
| 94 | Material and labour 25mm thick Damp proof course in cement concrete 1:2:4 type B-O to horizontal or vertical surfaces including necessary formwork, complete all as specified & directed . |
| 95 | Material and labour for roof treatment on RCC roof slab complete as mentioned below, all as specified and directed:- (i) Cleaning the concrete surfaces of RCC roof slab thoroughly with wire brushes, washed and dried. (ii) Checking the roof slab by flooding test with water till total elimination of leakage/seepage/ dampness all as specified in SSR Part-I (after ascertaining location of leakage/seepage/ dampness, carrying out treatment of pressure grouting shall be operated at the required locations). (iii) Brushing surface with neat cement slurry at the rate of 3.00 KG of cement per Sqm(iv) Cleaning the plastered roof surfaces and applying a coat of bitumen primer @ 0.3 Kg/Sqm on top of dry surface.(v) Laying APP modified polymeric membrane 3mm thick with non woven polyester core laid and bonded to the sub-strata and over-laps shall be sealed/fused by flame \\"torch', application method |
| 96 | Material and labour for applying bitumen base aluminium paint at 0.2 Kg/Sqm in two coats over APP modified polymer, complete all as specified & directed . |
| 97 | Material and labour for rendering over roof slab 10 mm thick in CM 1:3 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement and finished surfaces fair and even complete all as specified & directed . Note: WPC shall be measured and paid separately. |
| 98 | Material and labour for Providing and injecting chemical emulsion for Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified & directed . |
| 99 | Material and labour for at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified & directed . |
| 100 | E/M PORTIONNote: Returning, filling in and Removal will be measured under BOQ item No 5 and 6 above respectively. |
| 101 | Material and labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit medium grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable ISI marked modular boxes ,inner and outer cover of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed.a) One Light point controlled by one switch. |
| 102 | (b) One Wall fan/ceiling fan point controlled by one switch |
| 103 | (c) One switch socket outlet modular type 3 pin 6 amp on same board. |
| 104 | All as per item No 100 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 Amps on Independent board complete all as specified and as directed. |
| 105 | All as per item No 100 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 106 | All as per item No 100 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender