Tender For Repair Chain Link Fencing, Hard Standing, Drain Works And Repair And Maintenance To Sewage Line, Septic Tank, Soak Well, Man Holes And Other Misc Br Works At Cda Guwahati And Lao Office Under Ge Guwahati
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Sep 2026
13 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Chain Link Fencing, Hard Standing, Drain Works And Repair And Maintenance To Sewage Line, Septic Tank, Soak Well, Man Holes And Other Misc Br Works At Cda Guwahati And Lao Office Under Ge Guwahati
BOQ
| Sl. No. | Item Description |
| 1 | Demolition cement concrete n.exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 2 | Dismantling floor, hearth or all tiling including cement mortar bedding (but not backing coat), removing serviceable tiles to store and rubbish off the premesises complete all as specified and as directed. |
| 3 | Demolition of brick work built in cement mortar including all quions, arches pillars etc. complete all as specified and as directed. |
| 4 | Dismantling mild steel framed/unframed work of any description not other wise provided for complete all as specified and as directed. |
| 5 | Taking down cement plaster on brick wall/stone wall, ceilings, sunken floors etc, racking out joints, hacking for key & scrubbing with water completely complete as specified and directed. |
| 6 | M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete, foundation of RCC posts/struts etc complete all as specified and as directed. |
| 7 | S&F equal angle joist, channel, angle, MS plate or tee sections, including cutting drilling fabrication etc to requird length as in staging for water tank and connected works without connecting plates, conforming to Fe 410-W(Gade E-250) quality A including welding or screwing with nuts, bolt and washers etc complete all as specified and directed |
| 8 | Dismantling chain link fencing of any description and any type complete all as specified and as directed. |
| 9 | S&F Chain link fencing 4mm dia galvanised steel wire 100mm mesh fixed to fencing post including line and providing flat iron, bolts and nuts complete all as specified in drawing and as directed.Note: Minimum weight should not be less than 2.152 kg/sqm as per IS 2721:2003 |
| 10 | S&F in repairs punched tape concertina coil of 950 mm dia, 2.5 mm core wire, heavy galvanised (wire 275 GSM), tensile strength of wire 1450-1500 N/sqmm, (weight 15.20 kg/coil +/-5%) stretchable length upto 15 metres including securing or tying at crossings with and provision of galvanisez mild steel wire, staples or steel pins etc complete all as specified and as directed.Note: Length catered for is in straight line and not the total length of coils. |
| 11 | S&F 2 strand galvanised, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts& fixing to RCC post etc including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured) including dismantling of old barbed wire of any description and gauge etc fixed in any position in fencing post etc complete all as specified and directed.Note : Weight of barbed wire shall be ascertained by BOO ordered by Accepting Officer. |
| 12 | M&L for mid steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed. |
| 13 | M&L for Granite (of any type) tiles 15mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying of floor finish complete all as specified and as directed. |
| 14 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete as specified and directed. |
| 15 | M&L for preparation of new plastered surface of wall & applying two coats of cement base paint over a coat of alakali based primer all as specified and directed. |
| 16 | S&F Non skid, scratch resistant, stain resistant, parking tiles tiles 40cm x 40cm x 12 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment over 15 mm thick cementy mortar 1:6 screed bed complete all as specified and directed. |
| 17 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including taking down old pvaer block complete all specified and as directed. |
| 18 | M&L for 100 mm thick PCC (1:4:8) type D-2 using 40mm graded aggregate as in sub base finishing the surface smooth and fair complete all as specified and directed |
| 19 | M&L for 100 mm thick PCC (1:3:6) type C-2 using 40mm graded aggregate as in flooring finishing the surface even and smooth without using extra cement complete all as specified and directed |
| 20 | M&L forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and directed. |
| 21 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as necessary to facilitate demolition complete all as directed. |
| 22 | M&L for providing precast reinforced cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as in cover slab (for manholes etc) set in cement mortar (1:4) complete all as specified and directed. |
| 23 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 24 | M&L for preparation of new steel surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all specified and as directed. |
| 25 | M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6.00 m mean radius built in CM 1:6 complete as specified and directed. |
| 26 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 27 | M&L for PCC (1:3:6) type C2 (40 mm graded aggregate) in surface chanel and similar work complete all as specified and as directed. |
| 28 | M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred / stopped ends complete all as specified and as directed. |
| 29 | M&L for 200mm bore Reinforced Concrete Pipe class NP-3, laid and jointed with collars in trenches jointed as specified including demolition and breaking up drain reinforced concrete pipe of 200mm dia below GL) set in cement mortar complete all as specified and as directed. |
| 30 | S&F mild steel framed work as in doors / gates / steel frames etc. of angle or other section with gusset plates, rails, braces, etc., complete of Fe 410-w (Gde E-250) quality-A, drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening including necessary welding etc and fixing in position complete complete all as specified and as directed. |
| 31 | Taking down eaves gutter and rain water pipes (any size or pattern) including all fittings, heads,shoes, bends, swan necks etc including cleaning or refixing or removal to store complete all as specified & directed. (Measured overall as fixed along the centre line over fittings and accessories). |
| 32 | M&L for cleaning of sewer line of any diameter, any description including manhole by manually or other means, any depth, of any location manhcle of any depth, section size between the sewer lines sewer line to septic tank/sokwell/sump well by means of sewage sucking machine or by way of any other suitable means including disludging foreign material, sand ashes fibre silt greasa. night soil, etc and removing the taken out sludge/material out side MD land by any means/source keeping the sewage line functional complete all as specified and as directed |
| 33 | M&L for cleaning of manhole including removal of sludge of any size and depth upto 0.75 Mtr complete all as specified and as directed. |
| 34 | M&L for cleaning of manhole including removal of sludge of any size and depth from 0.75 Mtr to 1.50 Mtr complete all as specified and as directed. |
| 35 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc not exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 36 | Returning filling in, including spreading. Levelling, watering and well ramming in layers not exc. 25 cm in soft/loose soil complete all as specified and as directed. |
| 37 | Removing excavated material (soil) to a distance not exc. 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 38 | M&L for plain cement concrete (1:2:4) type B1 (using 20mm graded aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed. |
| 39 | M&L for Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:6 complete as specified and directed. |
| 40 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) including disposal of the debries complete all as specified and as directed. |
| 41 | M&L for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded aggregate as in plinth protection/ foot path finishing the surface even and smooth without using extra cement complete all as specified and directed |
| 42 | M&L for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded aggregate as in sub base complete all as specified and directed |
| 43 | M&L for 15mm thick screed bed or bedding layer of mortar in cement mortar 1:6 on brick or concrete surfaces for fixing of tiles as in floor complete all as specified. |
| 44 | M&L for rendering 10mm thick backiong coat on brick or concrete surface in cement mortar 1:4 for fixing of wall tiles as in dado/skirting etc complete all as specified and directed |
| 45 | M&L for providing non skid ceramic tiles (coloured) 300mm x 300mm x 6 to 7mm thick as in floor set and joint in cement slurry, jointed & pointed in white or coloured cement to match the surface of the tile complete all as specified and directed |
| 46 | M&L for providing glazed ceramic coloured tiles of size 450x300 mm (6 to 7 mm thick) as in dado/skirting set in cement slurry jointed & pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 47 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement plaster (1:6), finishing the surface smooth and even without using extra cement at foul position complete all as specified and as directed. |
| 48 | M&L for rendering 15mm thick plaster in cement mortar 1:4 mixed with WPC as per manufacturer instructions finished the surface even and smooth without using extra cement on fair faces of brick work or concrete surfaces complete all as specified and directed. (Note- supply only WPC shall be measured and paid seperately). |
| 49 | Supply only integral water proofing compound (ISI marked) of approved make complete all as specified and as directed. |
| 50 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 51 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 52 | S&F150 mm internal diameter of double wall corrugated (DWC) high density Polyethelene pipes(HDPE) and stiffness classes-8 (SN-8) with ISI marked(with CML no) with and including all fitting, bends, connections & jointing material for sewage line and laid in trenches as specified in IS 16098-2013 part-2 complete all as specified and all as directed. |
| 53 | S&F 110mm bore PVC (SWR) bends any radius with access door including all necessary work complete all as specified and as directed. |
| 54 | S&F 75mm bore PVC (SWR) bends any radius with access door including all necessary work complete all as specified and as directed. |
| 55 | S&F 75mm bore PVC (SWR) junction, single (Single T) equal or unequal including all necessary work complete all as specified and directed. |
| 56 | S&F 110mm bore PVC (SWR) junction, single (Single T) equal or unequal including all necessary work complete all as specified and directed. |
| 57 | M &L for 300mm bore Reinforced Concrete Pipe class NP-2, laid and jointed with collars in trenches jointed as specified including demolition and breaking up drain reinforced concrete pipe of 300mm dia below GL) set in cement mortar complete all as specified and as directed. |
| 58 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white with 'P' or 'S' trap (excluding flushing cistern and flush pipe), with integral foot rests including 150mm cement concrete (1:5:10) type E-2 using 40mm graded crushed stone aggregate) complete all as specified and as directed. |
| 59 | S&F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including PVC sheet cover complete all as specified and as directed. |
| 60 | S&F in repair, 10 ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, with inlet ball valve, float and brackets including flush pipe and PVC connection pipe 15mm bore with PTMT nuts of length 450mm, complete all as per directed. |
| 61 | M&L for cutting into existing manhole for connection new drain making good to pipe and rendering cutting-out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finish and reforming benching as required for 150mm dia complete all as specified and as directed. |
| 62 | M&L for opening of blokage to nahni trap,WC, floor trap,exc including washing/cleaning upto Ist manhole complete all as specified and as directed. |
| 63 | M&L for opening of blokage to gully trap,of WC outlet, including washing/cleaning upto Ist manhole complete all as specified and as directed. |
| 64 | M&L for cleaning of septic tanks of any capacity with removing of sludges etc and carrying to a distance exc 100 meters but n.exc 250 meters and depositing in ditches and deposited with spreading and leveling of excavated soils in the ditches over the sludge, removing surplus soils to a distance n.exc 50m and supply and sprinkling bleaching powder over the area of ditches with one meter around complete all as specified and directed. (Note: Excavation and bleaching shall be measured and paid separately under relevant item of schedule) |
| 65 | M&L for rough excavation in soft/loose soil and getting out for shallow pit n. exc 1.5 m deep and spraying adequate quantity of bleaching powder inside the bottom pits and its walls as well over the sludge for hygienic condition, and spreading levelling in layers the excavated earth on the shallow pits to cover the sludge in the pit, complete all as specified and directed. (Note: bleaching powder shall be measured and paid separately under relevant item of schedule) |
| 66 | M&L for bleaching powder to be used in item 64.00 & 65.00 here-in-before complete all as specified and directed. |
| 67 | M&L for broken bricks for loose filling with aggregate of gauge 80 mm to 150 mm graded in soakage pits, soakage wells etc including taking out old broken bricks complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender