Tender For Certain Repair To Sunken Portion, Flooring, Plastering, Sanitary Fittings, Periodicals And Internal Water Supply Incl Misc Repair To Jcos/Or And Offr Md And Certain Repair To Joinery And Allied Works In Md And Otm Accn At 2003 Stn Under Ge
Tender Value
48.46 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
14 days left
EMD
99000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair To Sunken Portion, Flooring, Plastering, Sanitary Fittings, Periodicals And Internal Water Supply Incl Misc Repair To Jcos/Or And Offr Md And Certain Repair To Joinery And Allied Works In Md And Otm Accn At 2003 Stn Under Ge (Af) Gurgaon
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each. And making the surface plain and smooth with cement mortar for fixing of windows and doors |
| 2 | All as item 1 herein before but exc 1.5 sqm but not 4 Sqm each |
| 3 | Refixing shutters of any description in the same opening incl taking down and resecuring or easing and adjusting all as specififed not exc 1 sqm each |
| 4 | S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint all as specified. |
| 5 | S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint all as specified. |
| 6 | M&L for PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate as in filling of pressed steel chowkats complete all as specified and as directed. |
| 7 | M&L for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side all as specified |
| 8 | S & F 35 mm thick second class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a). |
| 9 | S & F factory made solid panel PVC door frame of size 50mmx47mm out of 5mm wood grain printed PVC sheet & edges will be printed to match with printed sheet reinforced with M.S. square tube, all as per specification and drawing. |
| 10 | S & F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame all as specified and directed |
| 11 | S & F in repair Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be include in the quoted lum sum). →Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 12 | S & F in repair Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be included in the lumpsum quoted by the contractor. |
| 13 | Hacking out old broken glass panes (any thickness size quality or description ) from wooden frame fixed with oil putty or beads area not exc 0.5 Sqm each all as directed |
| 14 | S & F 4mm thick sheet glass ordinary quality and glazing with oil putty not exe 0.5 sqm in each pane. |
| 15 | S&F mild steel butt hinges medium weight cold rolled 100 mm size |
| 16 | - ditto - all as item 27 herein before but 75 mm size |
| 17 | S & F in repairs 200 mm long Aluminium, anodised, barrel tower bolts of extruded section. |
| 18 | S&F 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) & fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 19 | S & F in repairs 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised all as specified and directed |
| 20 | S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed all as specified |
| 21 | S&F in repair 150 length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring Fixed in floor |
| 22 | S & F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples including necessary wooden bedding with bolting/riveting /welding all as specified and direcetd |
| 23 | M&L preparing new wood and wood based material surfaces exc 10cm width or girth all as specified and directed |
| 24 | M&L for one coat of pink primer over wooden surface all as specified |
| 25 | M&L for one coat of synthetic enamel paint over wooden surface all as specified. |
| 26 | M&L for subsequent coat of synthetic enamel paint over first coat all as specified and directed |
| 27 | M&L for external teak wood lipping, 6mm thick fixed with nails for particle board of 18/19 mm thick all as specified and directed |
| 28 | S & F in repair Aluminium anodised hasp and staple of size 125 mm, safety type, including bolt to hinge plate and fixed with screws. |
| 29 | M&L for taking down and refixing aluminium door/window shutter nexc 2.4 sqm each in the same opening after repair/replacement/changing defected/unservicable of powder coating anodised aluminium section and mild steel work, handle, locking device for door including necessary joining cleats glazing clips, rubber neaprene packing, anodised aluminium snap beading screws etc fixed in repair. Note :- (i) The rate quoted under this item deemed included for necessary jointing cleates, glazing clips, alluminium beading, screws, rubber packing etc, in built handles for sliding windows & fitting of old glass. However, no element on account of weight will be taken into consideration for these item. (ii) Section of aluminium for repair/replacement shall be provided as per existing paid separatly and mild steel work, handle, locking device for door, wire mess will be paid separatly. |
| 30 | S&F powder coating anodised aluminium section for shutter/frame for door, window and ventilator complete all as specified. |
| 31 | S & F powder coated frame sections for doors and windows approved and fixed all as specified and directed (Note : (i) Paneling such as glass , Gauge etc will be measured and paid saperately.(ii) The rate quoted under this item deemed included for necessary jointing cleates, glazing clips, alluminium beading, screws, rubber packing and locking devices & in built handles for sliding windows. However, no element on account of weight will be taken into consideration for these item.(iii) Floor door spring/locks/tower bolts/ handles/ door closure/hinges for doors measured saparately.(iv) Size of door / windows shall be all as directed at site.(v) Grills will be measured saparately.(vi) Second class hard wood batten of appropriate size to be inserted inside the frame for fixing hinges and the same is included in the rate quoted.) |
| 32 | M&L for powder coated Anodised aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer -in-charge. |
| 33 | S&F rubber beading in aluminium doors and windows fixed in repair |
| 34 | S&F aluminium beading in aluminium doors and windows fixed with screw as in repair |
| 35 | S & F plain sheet glass 4.8 mm thick tinted, fixed to aluminium doors/ windows / ventilators complete all as directed by Engr-in-Charge (Note:- Beading/rubber packing is included in the rates for aluminium sections above.) |
| 36 | S&F 12 mm thick Toughned glass as in hinged doors, partitions as in sliding doors including allied frame and similar work including cutting to shape, drilling holes required imcluding any/all allied fittings (as in handle, lock, hinges etc) all as specifieda and directed |
| 37 | S & F frosted glass film glass door/winodws as directed |
| 38 | S&F in repair double action floor door stoper/spring hydroulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation bore, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty as in fixed including taking down and refixing aluminium shutter in the same opening. |
| 39 | S & F in repairs aluminium (diecast) body door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters of 700 mm in width & weight not more than 35 Kg. |
| 40 | S&F in repair Mortice lock brass 100 mm 4 lever vertical type fixed. |
| 41 | Dismantling Structural steel work including doors, gates but excluding framed truss etc. |
| 42 | S&F mild steel flat as in hold fast , wall ties angle cleat for security purline to wood trusses conforming to Fe 410 - 0 or Fe - 310 - as specified and direceted |
| 43 | S & F rolled mild steel framed work as in doors or gates of angle or other section confirming to Fe 410 - W, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing in wall and making the surface smooth with plaster/putty complete all as specified and directed. |
| 44 | S & F 1.25mm thick mild steel, plain, black sheet in wall cladding, steel gates, etc., cut to size, holes punched including rounded headed screws, clout nails or revets and fixed to wood or steel framing or fixing to MS clamps with necessary bolts and nuts with plain 40mm lap joints welded to frame as directed. |
| 45 | M & L for preparation of new steel surfaces of any description, over 10 cm width or girth, all as specified and directed |
| 46 | M & L for a coat of red oxide primer on steel surface all as specified and directed |
| 47 | M & L for prepariation of previously untreated steel surface all as specified and directed |
| 48 | M & L for a coat of synthetic enamel paint over primer surface all as specified and directed |
| 49 | As above but subsequent coat all as specified and directed |
| 50 | S&F stainless steel butt hinges heavy weight cold rolled 125mm size |
| 51 | Taking down and refixing of steel rolling shutters of any size after repair/allinement of shutter, repair/greasing of ball bearing, greasing of all shutter where required etc and making the surface smooth with plaster/putty complete all as specified and as directed by Engr in Charge |
| 52 | Taking down and refixing of steel gate of any size after repair/allinement of shutter bny welding, riveting etc and making the surface smooth with plaster/putty complete all as specified and as directed by Engr in Charge |
| 53 | S&F Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description, complete all as specified and as directed. |
| 54 | Supply and fix Godrej pattern mild steel cup board with shutter made out of 18 guage M.S. sheet 60cm depth sides incl with back & 3 shelves & vertical partition & mild steel door shutter two leaves with frame, incl necessary fittings with locking arrangement and handle etc all as per Godrej Pattern with duplicate keys including necessary fittings & two coats of spray painting over a coat of red oxide zinc chromate primer complete. The cupboard to be fixed to wall with 6 Nos of hold fasts of 25 x 3mm flat iron, 15cm long. The cost of hold fasts & grouting them in CM (1:3) is deemed to be included in unit rates including dismantling of existing cupboard. (Only front face of cupboard to be measured) complete all as specified and as directed. |
| 55 | M & L for false ceiling work of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended fromsoffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the ntermediate channel with connecting clips across the intermediate channel at 600 mm centre to centre. ( Note : Ht may vary upto 12.0 m) |
| 56 | M & L for hanging of GI. false ceiling grid with 3 mm dia GI wire(upto necessary required length & 1.2 Mtr c/c) fixed to slopping roof (rafter/purlin/trusses) complete all as specified. |
| 57 | M & L Non asbestos fibre cement building boards 6 mm thick (one side embosed design), fixed or laid/ inserted to GI grid frame work in ceiling with clips all as specified and directed. |
| 58 | M&L for PVC false ceiling consisting of premium PVC panels, Framework(GI/Alm.) including mains ection and perimeter channels , Lighting fixtures all as specified and approved by Engineer-In-Charge |
| 59 | S&F PVC wall Lining/panelling consisting of 4 to 5mm thick hollow type, single side prelam PVC sheet used instead of plain colour sheet fix to wall with screws incl matching PVC beading all as per specified and directed by Engr -in -Charge. |
| 60 | M&L PVC hollow Flutted Panel / WPC Louvers 16 to 18mm thick wood grain teak finished prelaminated inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves and screws as required at site on wall / ceiling complete all as specified and directed |
| 61 | Dismantling damaged/unserviceable Galvalume, AC and Fiber Sheeting of any gauge and thickness, complete all as specified and as directed. |
| 62 | Excavation in post holes (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth or broken, rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed. |
| 63 | M & L for PCC type C-2 1:3:6 (40 mm graded aggregate) as in foundation, filling and mass-concrete or subbase to floor and like filling in fencing post |
| 64 | S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws as specified and directed by Engineer-in Charge |
| 65 | S&F Framed mild steel work as in angle, structural pipes with any type of forging, riveting, welding etc complete conforming to Fe-410-0 or Fe-310-0 all as specified |
| 66 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise |
| 67 | M&L for surface excavation exc 15 cm deep and not exc 30 cm all as specified and direcrted |
| 68 | M&L for refixing Factory Made Machine Pressed Pre-cast Concrete Coloured 60/80 mm thick of M-35 Grade, Interlocking Paver Blocks with Spikes Marks on Top Surface, of any Shape and Size, conforming to IS:15658-2006 with Grey Cement and Pigment.( Except tiles) |
| 69 | M&L Factory Made Machine Pressed Pre-cast Concrete Coloured 60mm thick of M-35 Grade, Interlocking Paver Blocks with Spikes Marks on Top Surface, of any Shape and Size, conforming to IS:15658-2006 with Grey Cement and Pigment. |
| 70 | M&L for 25mm thick sand cushioning including watering and consolidations etc complete all as specified and directed. |
| 71 | M&L for exterior grade coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. over 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 72 | M&L Non skid coloured endura tiles 8-10 mm thick (square/rectangular) area of each tile N exceeding 0.18 Sqm floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:4.. |
| 73 | S&F 30-35 mm thick GRC/GFRC jali it in walls/RCC Columns including dismantling old RCC jali all as specified and directed |
| 74 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cutand fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware[Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and required accessories. (Note: The unit rate quoted by contractor excludescost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) area not exc 2.0 sqm |
| 75 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed withgalvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 76 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Windowprofile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 77 | Providing and fixing stainless steel ( Grade 304) gate made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the Gate with incl necessary accessories butt hinges & stainless steel dash fasteners , stainless steel bolts etc., of required size, o with suitable arrangement as per approval of Engineer-incharge |
| 78 | Dismantling of modular kitchen shutters/cabinets including stainless steel baskets and framing all as directed. |
| 79 | S & F Modular shutters of PVC silica boards of 18/19mm thick with self closing hinges, powder coated handles,magnetic lock system etc for SS baskets fitted below the cooking platform attached with modular baskets complete all as specified. |
| 80 | S & F Modular kitchen sliding type Stainless Steel Baskets with framing along with bottom and top rail, overall depth of framing not less than 50 cm including all necessary fitting like and fixtures all as specified and directed by Engr-in-charge. |
| 81 | S & F Modular Kitchen cabinet along with shutters and shelves having depth not less than 30 cm with necessary partitions inside the cabinet with PVC silica boards made finished boards 18/19 mm thick with self closing hinges, powder coated handles,magnatic lock as in drawers, cabinets, cupboards system etc complete all as specified. (Note : only front face is measured for payment purpose.) |
| 82 | Removing building materials etc. to a distance exc 1000 m and outside the MOD land beyond the lead included in the rates, including loading, unloading and stacking at the destination |
| 83 | M&L for factory made Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge |
| 84 | M&L for factory made powder coated Anodised aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer -in-charge. |
| 85 | S & F plain sheet glass 4.8 mm thick tinted, fixed to aluminium doors/ windows / ventilators complete all as directed by Engr-in-Charge (Note:- Beading/rubber packing is included in the rates for aluminium sections above.) |
| 86 | M&L for applying frosted glass film over window/ door glass as directed |
| 87 | S&F 125 mm long SS steel Butt hinges, medium weight, cold rolled and fixed all as specified. |
| 88 | S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed. |
| 89 | S&F in aluminium tower bolts 200 mm, stove enamelled black, with bright bolt and fixed all as spcified and directed |
| 90 | S&F 150 mm size Aluminium handles, oval type, stove enamelled black, ISI marked all as specified. |
| 91 | Supply & fix factory made solid panel moulded PVC door frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet & edges to printed to match with printed sheet, reinforced with MS Square tube, complete all as specified and directed. |
| 92 | S & F Factory Made Solid PVC Moulded Door Shutter , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame all as specified and directed |
| 93 | S&F in repair tubular towel rail 20 mm dia type brass chromium plated 600 mm long complete all as specified and directed |
| 94 | Demolitin of brickwork built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles all as specified and dierected |
| 95 | Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as spd and directed |
| 96 | M&L Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls,built in CM (1:4) and as directed. |
| 97 | Taking down cement plaster on brick walls or stone walls any description etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 98 | M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed. |
| 99 | Rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement all as specified and directed. |
| 100 | M&L Rendering 15 mm thick cement plaster on fair faces of stone masonry or brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed (Note : edge/face of the chajjas, where damaged, shall be repaired and is included in this item.) |
| 101 | M&L for Rough cast plaster in shaft area upto two storey bldg over old plasteres surface of brick walls size 6mm with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even completed all as specified & directed by Engr-in-charge. |
| 102 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint over new/old surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed |
| 103 | M&L for preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified & directed. |
| 104 | M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as spd and directed. |
| 105 | M&L for applying one coat of 100% Premium acrylic emulsion paint over new/old surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed |
| 106 | M&L for applying subsequent coat of 100% Premium acrylic emulsion paint over new/old surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed |
| 107 | M&L for preparation of old plastered surface complete all as specified & directed. |
| 108 | M&L for applying 2mm thick wall care putty and making the surface smooth as specified & directed. |
| 109 | M&L for applying a coat of oil emulsion distemper complete all as specified & directed. |
| 110 | M&L applying subsequent coat of oil emulsion distemper complete all as specified & directed. |
| 111 | M&L preparation of old plastered surface in ceiling complete all as spd and directed. |
| 112 | M&L for applying 3 mm thick wall care putty in ceiling complete all as spd and directed. |
| 113 | M&L two coats of white wash on surface of ceiling complete all as spd and directed. |
| 114 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as directed. |
| 115 | M&L for Cement concrete type C-1, 1:3:6 (using 40mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and smooth complete all as specified |
| 116 | M&L for 75 mm thick PCC ,type D-2 1:4:8 (20 mm graded aggregate) in flooring cmplete all as specified and directed. |
| 117 | M&L for Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris from the premises all as specified and directed |
| 118 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match and the shade of the tiles including 15mm screed bed or bedding layer CM 1 : 6 all as specified and directed by Engineer-in-Charge. |
| 119 | M&L for Virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement tomatch including 15mm screed bed or bedding layer CM 1 : 6 all as specified and directed by Engineer-in-Charge. |
| 120 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles including 10 mm thick rendering CM 1 : 4 all as specified and directed. |
| 121 | M & L glazed coloured (digital/printed/design) ceramic tiles in vertical surface 450 mm x 300 mm x 7mm thick or set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed |
| 122 | M&L for 100/125 mm square CP grating fixing in bathroom floor as in for basin as dircetedq |
| 123 | M&L for Chequered cement concrete tiles glossy finish of size (min.)20cm x 20cm x 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors with screed bed flooring all as spd and directed |
| 124 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified & directed. |
| 125 | M&L 16-18 mm thick Granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite over 15 mm thick cement screed/rendering in CM 1:4 including Roughening surfaces of old/new concrete floor/wall by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm all as spd & directed. |
| 126 | M&Lfor Round chamfering, to the edges of granite n.exc 15mm wide on granite stone shelves all as specified and dircted. |
| 127 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed. |
| 128 | M&L cutting chases pinning in brick mass and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth all as specified and dierected |
| 129 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed. |
| 130 | S&F 20 mm outer dia bore CPVC tubes with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified. |
| 131 | S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified. |
| 132 | S&F in repair Bib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated complete all as spd and directed. |
| 133 | S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm all as specified and directed. |
| 134 | S & F in repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread ,all as spd and directed |
| 135 | S&F in repair PVC waste pipe 32 mm dia for 32 mm full thread for wash basin and urinal as specified |
| 136 | S&F in repair PVC waste pipe 40 mm dia for 40 mm full thread for kitchen sink as specified |
| 137 | S&F in repair 15mm bore pillar cock fancy type chromium plated, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked add if fixed in repairs complete all as specified & directed. |
| 138 | S&F in repair 15mm bore pillar cock long thread chromium plated, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked add if fixed in repairs complete all as specified & directed. |
| 139 | S&F 5.5 mm thick mirror(600 x 450 mm size minimum) with moulded edge with chromium plated brass screws on each corner or as required and cup washers all as spd. |
| 140 | S&F in repair Vitreous china squatting pan (orissa pattern) size 580 X 440 mm, white, complete including fixing to trap, pan including all joints and making good the floor complete all as specified and as directed. |
| 141 | S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed. |
| 142 | S&F for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 143 | Dismantling water tanks of any capacity and removing to store complete all as specified and directed |
| 144 | M&L for Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed. |
| 145 | M&L for 15 mm dia Nipple suitable for HDPE water tank of any capacity |
| 146 | M&L for 20 mm dia Nipple suitable for HDPE water tank of any capacity |
| 147 | S&F in repair 15 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15 mm bore all as specified and directed. |
| 148 | S&F in repair 15 mmBall brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed |
| 149 | Stop valves 15 MM bore dia, cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 150 | S&F in repair 100mm PVC soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints including any type of fittings( as in bedn, elbow etc) all as specified. |
| 151 | S&F in repair kitchen plate rack stainless steel 1 mm thick of size 90cmx90cm (weight not less than 8kg)complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and as directed |
| 152 | M&L for CI floor trap 100 mm with square grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified. |
| 153 | M&L for Sheet glass shelf assembly consisting of 5.0 mm thick sheet glass shelf 12cm wide or corner shelf of dia 25 cm min. with chromium plated bracket guard and railing complete all as specified and directed |
| 154 | M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm padding as roof/subbase , surface finished even and smooth in slope if required without using extra cement |
| 155 | Taking down carefully existing bitumen tarfelt including plaster and roughning the surface cleaning the surface and removing of the rubbish to a out of MOD land all as specified and directed |
| 156 | 15mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement |
| 157 | M&L for cleaning the newly plastered surfaces thoroughly with wire brushes and providing water proofing treatment all as specified here in after :- (a) Bituminous primer @ 0.30liter per sqm conforming to IS 3384-1986 (b) 3mm thick APP polymeric membrane minimum weighing 3 Kg/Sqm (one layer) laid by torch application method with over laps of 100 mm joints of traverse direction and 75 mm at longitudinal direction duly thermofused by flame torch all as specified in application manuel of the company |
| 158 | M&L for Applying Each coat of aluminium paint / waterproof paint paint as directed by Engr-In-Charge |
| 159 | Supply only liquid water proofing compound |
| 160 | S&F Sscurtain rod including brackets and side doom complete all as specified and directed |
| 161 | S&F Brass chromium plated shower rose 125 size including fixing to steel with 600 mm long shower handle necessery joints/fittings complete all as specified and direced (Note : Ht is upto two storey building.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender