Tender For Repair Of Path And Hard Standing Under Ge(N) Akhnoor.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
8 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Path And Hard Standing Under Ge(N) Akhnoor.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed |
| 2 | Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified and as directed. |
| 3 | Ditto all as per Srl item No. 2 here-in-before, but except bricks. |
| 4 | Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius built in cement sand mortar 1:4 in half brick thick wall complete all as specified and directed |
| 5 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 6 | Rendering 10 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed. |
| 7 | Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed. |
| 8 | Rendering 5 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling including finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 9 | Repair to balcony/facia and soffit of chajjas etc by taking down old plastered surfaces and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqcm in width or girth & rendering 15 mm thick dubbing coat where required to match with the existing thickness in CM 1:4 including formwork/scaffolding work upto height 7.00mtr above ground level of bldg including two coats of apex paint over one coat of primer complete all as specified and as directed. |
| 10 | Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed. |
| 11 | Preparation of newly plastered surfaces of ceiling and applying applying two coat oil bound distamper over a coat of primer complete all as specified and as directed. |
| 12 | Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed. |
| 13 | Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening primer complete all as specified and as directed. |
| 14 | Preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted walls and applying one coat of oil bound distemper complete all as specified and as directed. |
| 15 | Ditto All as per item No 14 here in before but one coat of distemper oil emulsion on ceiling. |
| 16 | Preparation of old painted surfaces by washing, rubbing down and stopping of plastered surfaces and applying one coat of cement base paint white or tined on wall complete all as specified and as directed. |
| 17 | Preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted walls and applying two coats of synthetic enamel paint over a coat of 2mm thick putty on concrete or plastered surfaces complete all as specified and directed |
| 18 | Preparation of old decorated surfaces including brooming down or steel wire brushing ,scraping down smoke soot, moulds,moss and efforescent salts and removing oil and greasy spots and applying one coat of white wash on walls all as specified. |
| 19 | Ditto All as per item No 18 here in before But two coats of white washing on walls. |
| 20 | Ditto All as per item No 18 here in before But one coat of white washing on ceiling. |
| 21 | Two coats of distempering wall with distemper oil emulsion white or tinted over a coat of 2mm thick wall care putty, including preparation of old surface after complete removal of existing treatment all as specified. |
| 22 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed. |
| 23 | 40 mm thick PCC 1:2:4 type B-1, (Using 20 mm graded crushed stone aggregate) as in flooring finishing the top surface even and smooth complete all as specified. |
| 24 | 50mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid in bays complete including mastic filling at joints finishing the surface of concrete topping even & fair, complete all as specified. |
| 25 | 25mm thick sand cushion in flooring below interlocking tiles complete all as specified and directed.Note : For payment purpose funnel thickness of 25mm shall be measured. |
| 26 | Machine pressed precast concrete interlocking paver block of any shape and size approved by EIC, ISI marked (IS:15658-2006) 60mm thick, M-35 grade , in paths and hardstanding,with grey cement and pigment (coloured), laid tightly over and joints filled with dry sand. (Colour and pattern as approved by GE) complete all as specified and directed. |
| 27 | Chequered cement concrete tiles 25cmx25cmx22-25mm/30mx30cmx25mm thick laid & jointed with grey cement and pigment (coloured) and pointed in neat cement slurry as in flooring, including 15mm thick rendering as in CM 1:4 complete all as specified and directed |
| 28 | 10mm thick heavy duty coloured tiles of size 300x300mm/ 400x400mm as in path set & jointed with grey cement and pointed in neat cement slurry & pointed in white or coloured cement and pigment as in flooring, including 15mm thick screed bed as in CM 1:4 complete all as specified and directed. |
| 29 | Plain Cement Concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof kerb, padding , finished surface even and fair, complete all as specified and directed. |
| 30 | Plain Cement Concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base or filling in mass concrete etc complete all as specified and directed. |
| 31 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 32 | 25mm thick PCC 1:2:4, type, B-0 (using 12.5mm graded crushed stone aggregate) as in levelling course finished even and fair to receive tiles, kota stone complete all as specified and directed. |
| 33 | Non skid coloured ceramic tiles 7 to 8 mm thick(square / rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM (1:6) finished fair and even, complete all as specified and directed. |
| 34 | Ditto all as per item No 33 but in skirting over and including 10mm thick rendering in CM 1:4 |
| 35 | Glazed ceramic tiles 450 x 300 x 7mm thick / 350 x 250 x 7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 36 | Vitrified tiles light shade 10 mm thick (square/rectangular) area of each tile not exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 37 | Ditto all as per Item No 36 here-in-before but as in skirting including 10mm thick plaster in CM 1:4 complete all as specified and directed . |
| 38 | 18-20 mm thick black granite for border/cooking platform etc, bedded and jointed over 20mm thick screed in cement mortar 1:6 including pointing in white cement 1:2 using marble dust including cutting and polishing complete all as specified and as directed. Note : A hole must be drilled in platform wherever required for gas pipe. |
| 39 | Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and as directed. |
| 40 | Structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality B complete all as specified. |
| 41 | Dismantling of AC/CGI/Galvalume sheets corrugated or semi-corrugated in roof covering including ridges, hips, valleys and flashings etc complete all as specified and as directed. |
| 42 | Pre-painted galvalume aluminum zinc coating GI based corrugated sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 43 | Pre-painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 44 | Pre-painted galvanised coloured profile steel sheets 0.50mm thick (Mangalore Pattern) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. Note: shape and colour shall be as approved by GE. |
| 45 | 4-5mm thick coloured polycarbonate sheet fixed with self tapping screws fixed in repairs complete all as specified. Note: Shape and colour shall be as approved by GE. |
| 46 | Demolition of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc. complete all as specified and directed. |
| 47 | 20-25 mm thick machine cut kota stone slab as in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing laid over and including 20mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed. Note:-(Size of Kota Stone slab Shall not be less than 52 cm x 52 cm ). |
| 48 | -Ditto- All as per item No 47 above but in skirting/dado fixed over and including 10mm thick plaster in CM (1:4), complete all as specified and directed. |
| 49 | 20 mm thick makrana white marble as in border/cooking platform etc, bedded and jointed over 20mm thick screed in cement mortar 1:6 including pointing in white cement 1:2 using marble dust including cutting and polishing complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender