Tender For Extension Of Dining Hall For Girls Barrack At Dg Ncc C , Provn Of Security Fence Around P-111 And P-112 Mech C , Parking Shed For 02 X Amb (Swaraj Mazda) Near Accident And Emergency Trauma Centre At Base Hospital As Per The Nqas Guidelines
Tender Value
47.60 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
14 days left
EMD
95216
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Extension Of Dining Hall For Girls Barrack At Dg Ncc C , Provn Of Security Fence Around P-111 And P-112 Mech C , Parking Shed For 02 X Amb (Swaraj Mazda) Near Accident And Emergency Trauma Centre At Base Hospital As Per The Nqas Guidelines Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in hard/dense soil not exc 1.5 m wide and not exc 1.5m deep and getting out complete all as specified. |
| 2 | M&L for PCC (1:4:8) type D2 using 40mm graded stone agg as in mass filling and foundation complete all as specified and as directed. |
| 3 | Form work to sides of concrete foundations, footings, bases of columns, raft and raft eams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter for flat rough finished surfaces of concrete, complete all as specified and as directed. |
| 4 | M&L for RCC M-25 (Design mix) using 20 m graded aggriregate for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed. |
| 5 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions for Square, circular rectangular on plan or polyg flat rough finished surfaces of concrete, complete all as specified and as directed. |
| 6 | M&L for RCC M-25 (Design Mix) using 20 mm gradded stone aggregate for Columns, pillars, piers, posts and struts, complete all as specified and as directed. |
| 7 | M&L for RCC M-25 design mix using 20 mm gradded stone aggregate for beams, cantilevers & lintel beams etc complete all as specified and as directed. |
| 8 | Formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and as directed. |
| 9 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and as directed. |
| 10 | Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide and sides of RCC, PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide complete all as specified and directed. |
| 11 | RCC Design mix M-25 in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed. |
| 12 | S&F MS TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 all as specified. |
| 13 | S&F MS TMT bars 6 to 8mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 all as specified. |
| 14 | M&L for brick work with sub class B bricks (Old size) straight or curved on plan exceeding 6mt mean radius built in CM(1:6) complete all as specified and as directed. |
| 15 | M&L for Rendering 15 mm thick in CM 1:6 on walls, finished even and smooth with using extra cement. |
| 16 | M & L two coats of oil bound distemper on internal wall surfaces over a coat of primer and 2mm thick wall care putty incl preparation newly plastered surface complete all as specified. |
| 17 | M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including and finishing the surface even and smooth, complete all as specified and as directed. |
| 18 | M&L for applying two coats of apex paint on walls over a coat of primer and 2mm thick wall care putty including preparation of new plastered or un-plastered surfaces of wall complete all as specified. |
| 19 | M&L for Rendering 12 mm thick in cement and sand mortar 1:3 on ceiling surfaces including and finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 20 | M&L for applying two coats of oil bound distemper on ceiling surfaces over a coat of primer and 2mm thick wall care putty including preparation of new plastered surface of ceiling complete all as specified. |
| 21 | Surface excavation not exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft /loose soil. |
| 22 | M&L for stone hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceedind 15 cm thick, watered and rammed to a true surfaces complete all as specified and as directed. |
| 23 | M&L for 100mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 24 | M&L for 25mm thick PCC (1:2:4) type B-0 with using 12.50 mm graded stone aggregates as in sub base of flooring, finished even and rough to receive the top layers all complete as specified and as directed. |
| 25 | M&L for Vitrified light shade tiles 9 to 10 mm thick (square/rectangular) area of each tile not less than 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bedding layer in CM 1:6, complete all as specified and as directed. |
| 26 | Description all as per item No 25.00 above but as in skirting but over and incl backing coat/ rendering 10mm thick in CM 1:4, complete all as specified and as directed. |
| 27 | M&L 4mm thick designer false ceiling e- board in ceiling fixed with screw as per manufactures instruction, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33 mm thick galvanized steel sheet & size T-24x32 mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 2 mm dia fixed rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runner at 600 mm c/c to from 600 x 600 mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19 x19 mm of white colour all as per instruction and including dismantling of walls and celling existing old board (fibre pulp. Insulation etc.) or insulation boards/slabs/blanks any thickness including cover fillets, any type of frame etc, complete all as specified and directed. |
| 28 | M&L for providing and applying the plaster with single component ready to use repair motar (Smart Care repair motar of Asian Paint or equivalent in FOSROC/SIKA/STP) capable of applying 15 mm average thickness in single layer or finishing with trowel with a bond coat : (SBR polymer @ 10% of cement weight) modified cementious Bond coat @ 2.2 kg cement per sqm including taking down existing roof treatment of any type and also taking down cement plaster on brick / concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc. to receive further treatment. completed all as specified and as directed. Note; the application shall be executed on any type of surface and on horizontal/ceiling/ vertical area. |
| 29 | M&L for water proofing treatment applying Sikaplan WT 4220 polyolefin flexible homogeneous smooth sheet membrane with a glass fibre reinforcing inlay, WRAS approved for potable water, thermally welded over Sikaplan WT 4300 polyolefin flexible homogeneous smooth sheet membrane with a glass fiber reinforcing inlay, thermally welded over new surface here-in-before at srl item No 42. Ponding test will be carried out by filling 25mm deep water layer on entire surface for a week to check the leakage and corrective measure where required. (Make: SIKA/FOSROC/STP)Notes: (1) The work shall be executed through authorised appplicatot of manufacturer only.(2) Authorised Applicator shall be approved by GE befor starting the work.(3) All materials shall be produced directly from manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchage vouchers.(4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water Proofing treatment for a period of Ten years in favour of GE. A sum equivalent to 2.5% (Two point five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor's duues as security deposite. The contractor may, however, furnish a fixed deposite receipt in lieu from a Schedule bank pledged in fevour of Garrison Engineer. |
| 30 | Complete removal of existing treatment and applying two coats of oil bound distemper (any tint) over a coat of primer on walls complete all as specified and directed. |
| 31 | Complete removal of existing treatment and applying apex exteriour emulsion paint on walls complete all as specified and directed. |
| 32 | Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars etc, complete all as specified. |
| 33 | S&F factory made uPVC white color sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket 1.2+0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) Area not exceeding 2.00 sqm each. |
| 34 | M&L for structural steel work as in joist, channel, angle fixed independently without connecting plates etc (cut to ordinary lengths) confirming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 35 | Returning filling including spreading leveling, watering and well ramming in layer not exc 25cm thick, complete all as specified and as directed. |
| 36 | Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and as directed. |
| 37 | M&L for 15mm thick rendering in CM (1:6) on walls,finished even and smooth without using extra cement incl taking down existing planer, hacking for key, complete all as specified and as directed. |
| 38 | Demolition of cement concrete (un-reinforced) in Ground floors and paving not exe 15cm thickness (below or above ground level) including removal of rubbish out side complex (MOD land), complete all as specified and directed. |
| 39 | M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base for flooring or in any position complete all as specified and as directed. |
| 40 | M & L for Coloured Machine pressed precast concrete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-40 Grade with grey cement and pigment laid dry in floor/path over & including 50mm thick sand cushioning incl dismantling of existing interlocking tiles of any type complete all as specified and as directed. |
| 41 | M & L for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required (Size and pattern as approved by GE) and including dismantling of old existing kerb stone of any type and size etc complete all as specified and as directed. |
| 42 | M & L for applying two coats of synthetic enamel paint, any tint on new plastered surfaces or brick, stone, concrete, asbestos cement or plastered surface exceeding 10cm width or girth including preparation of old painted surfaces and 2-3mm wall care putty over a coat of primer complete all as specified and as directed. |
| 43 | M & L for preparation of pathway/flooring (over Interlocking/Chequired tile surfaces) or any type of surfaces old/new or in any position and applying two coats of floor paint of superior quality as directed by Engr-in-Charge and at site complete (Make : Asian/Berger/Indigo) |
| 44 | S&F UPVC ventilators as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 4mm thick tinted glass of superior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and as directed. |
| 45 | M&L for Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work using cement mortar 1:4, complete all as specified and as directed. |
| 46 | Taking down door/ window frame or chowkhat with shutters exceeding 1.5 Sqm but not exceeding 4.0 Sqm, complete all as specified and as directed. |
| 47 | BLANK |
| 48 | Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in hard /dense soil, complete all as specified and as directed. |
| 49 | Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/ loose soil complete. |
| 50 | Demolition of plain cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 51 | M&L for Mild Steel hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed. |
| 52 | M&L for PCC (1:3:6) Type C-2 using 40mm graded stone aggregate as in foundation, filling in mass concrete complete all as specified. |
| 53 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4), complete all as specified and as directed. |
| 54 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long, complete all as specified and as directed. |
| 55 | S&F for galvanised expanded metal for chain link fencing, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members |
| 56 | M & L for glazed ceramic tiles in vertical surface of size 300mmx450mm or 300mmx600mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10 mm thick backing cooat/ rendering in CM 1:4, complete all as specified and as directed. |
| 57 | S&F Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified. |
| 58 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 59 | M&L for mild steel round bar, 10mm dia and over, cut to length, bent to shape required, including cranking, fixed with fencing complete all as specified and directed by Engr- in -Charge |
| 60 | Writing letters or figures (Block/ Roman/ Italic or Indian) not exc. 30 cm high |
| 61 | S& F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed |
| 62 | M & L for PCC 1:2:4 type B2 40 mm graged agg in Posts, pillar, walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) and necessary form work complete all as specified. |
| 63 | S&F steel tubular Column, Rafter, Purline etc. including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St- 240, complete all as specified and as directed. |
| 64 | S&F(plain or chequered) channels, square cut or notched (oridinary and counter sunk) forming holes, w/o any attatchment. |
| 65 | M&L for mild steel bolts purpose made with hexagonal or square head one end each screwed other end to be fitted with washers and one hexagonal or square nut. Dia 16mm and 60 cm long. |
| 66 | S&F pre-painted galvatume aluminium zinc coating GI based corrugated crimp curved steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 67 | M&L for point wiring concealed type with 1.5 sqmm Nominal cross sectional area, single core, 1100 Volt grade, multi stranded, PVC insulated, unsheathed FRLS-H copper conductor cable and connected to common earth and earth dollywith suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and modular PVC box, modular white cover plate with frame, blanking plate, T Cover etc suitable for upto required module etc complete and making good disturbed surfaces to match the existing for one light controlled by one, one way switch 06 Amp, for light/ fan/ buzzer etc complete all as specified and as directed. |
| 68 | One socket outlet point 5 amps on the same board. |
| 69 | One socket outlet point 5 amps on the independent board. |
| 70 | Description all as per item No. 67.00 here in before but point wiring with 2.5 Sqmm, multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor complete all as specified and as directed. |
| 71 | Description all as per Srl Item No 68.00 here-in-before but with 4 sq mm FRLS-H copper wire with 4 Sqmm FRLS-H copper earth wire for independent point. |
| 72 | S&F Modular switch 16 Amp, 1 way, 1 module size complete all as directed.by Engineer-in-Charge white/ Black/ Brown complete all as specified and directed. Make-Indoasian shynora/ Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 73 | S&F Modular socket 16 Amp multipurpose shuttered type, 2 module size with indicator lamp complete all as directedby Engineer-in-Charge white/ Black/ Brown complete all as specified and directed. Make-Indoasian shynora/Legrand Artear/ Havells murano/Gold medal Gifa-X9 or equivalent. |
| 74 | S&F Modular switch 6 Amp, 1 way, 1 module size complete all as directed by Engineer-in-Charge white/ Black/ Brown complete all as specified and directed. Make-Indoasian shynora/ Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 75 | S&F Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and white wash/colour/distemper etc complete all as directed. |
| 76 | S & F for distribution board double door type, SPN, 4 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. |
| 77 | S&F BLDC (Brushless Direct Current) Ceiling Fan (energy efficient), 1400 mm with IR Remote controlled also suitable for regulator, opertaing voltage 220V, minimum air delivery 265 cmm class of insulation 'F' having full copper motor winding & ribbed 3 Nos A/M blades making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan complete all as specified and directed.The fan shall have BEE 5 star rating and service value more than 7.1. Make-Havells/ Atomberg/ Crompton and Goldmedal. |
| 78 | S&F LED Flood light 45 Watt, highly efficient IP66 LED, high power having aluminium pressure die cast housing and PC cover in the front and high power lens for batwing light distribution with electric connection with suitable size of PVC insulated copper wire including GI bracket with clamps and bolts complete all as specified and directed. |
| 79 | S&F of a heavy-duty, corrosion-resistant PVC body desert air cooler of minimum 4000m3/Hr, having a minimum water tank capacity of 70 liters, equipped with a high-efficiency submersible pump, a multi-speed blower/fan motor in copper winding suitable for operating on 230V, single-phase, 50Hz AC supply, high-density eco-friendly honeycomb cooling pads on three sides, automatic motorized vertical louvers for omni-directional air throw, and a built-in water level indicator complete all as specified and as directed. |
| 80 | S&F Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed by Engineer-in-Charge white/ Black/ Brown complete all as specified and directed. Make-Indoasian shynora/Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 81 | S&F Modular Step Fan regulator, 120/70 watts single / double module, fixed in repairs, complete all as specifed and as directed. Make-Indoasian shynora/Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 82 | S & F of LED batten luminaire surface mounted with aluminium housing & PC diffuser, 4 feet system wattage of 20 watts initial lumen maintained CRI>80, Power Factor >0.9, THD<20%, colour temperature-6500K, surge Protection 2.5 KV in CM,IP-20 protected, meets LED IS specified, Class-1, short circuit and over circuit protection, voltage range -140 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiency at luminaire level >120 Lumen/watts and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 83 | M&L Sub main wiring with 2 run of 10.0 Sqmm (nominal area) FRLS-H, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 10.0 Sqmm (nominal area) FRLS-H, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed. |
| 84 | S&F of MCB DB conforming to IP 43 - IK 09 with single door, SPN 12 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces. |
| 85 | S&F of MCB SP, C Curve type, 10 KA, 10 to 32 Amp, with over load and short circuit protection complete all as directed. |
| 86 | S&F of MCB SPN, C Curve type, 10 KA, 63 Amp, with over load and short circuit protection complete all as directed. |
| 87 | S & F MCB DP, 240 Volts, 63 Amps complete all as specified and directed. |
| 88 | S & F energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed. Make Eveready/Crompton/Havells or equivalent. |
| 89 | Supply and fixing of street light fitting bracket, 1.0 mtr long bent to shape made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed. |
| 90 | Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make Eveready/ Crompton/ Havell or equivalent. |
| 91 | Supply and installation, commissioning and testing of Modern Flying Insect Killer Stainless steel 304 grade with 02x18 watt UVA lamp, single phase, 220 V, 50 HZ, made out of MS/CRCA sheet, Ultra voilet based attraction, wall mounted/Hanging type,GI wire grid with tray,and based upon light intensity approx 300-400 sqft, complete with fittings and accessories and depositing the old U/s item to MES store yard, complete all as specified and as directed. (Make : Techmate Industries/ Flycutor/ Chronovex/ Hare Krishna) |
| 92 | Supply and installation, commissioning and testing of commercial Air curtain unit for prevention of dust and conditioned air losses, single phase, 220 V, 50 HZ, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS - CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1-1.5 m/sec air velocity at floor level for door opening and depositing the old U/s item to MES store yard. all as specified and as directed. (Make: Dolphy/ Cronax/ Logos India/ Cross Flow India) |
| 93 | Supply, laying and testing of 2 core 6 sqmm size XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade complete all as specified and as directed. |
| 94 | M&L Earthing complete with galvanised Iron earth plate eletrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of the plate not less than 1.5 metre below normal grond level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate with using 4mm dia GI wire as earth wire electrode welded and revetted to earth plate at one end connected to main DBs of Building at another end GI earth wire encased in and including 15mm bore GI light grade pipe through upper end of earth plate upto main DB of bldg, with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, MS funnel with wire mesh fixed on water pipe including execvation earth work, Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforeced with MS bars 8mm dia @ 150 mm centre to centre, both ways complete with lifting handle all as shown in electrical plate No 3 of SSR of part-I complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender