Tender For Pname Of Work: Provn Of Double Storey School Building At Advs (Army Double Victory School) Beas Mil Station (Tender Id: 2026_Mes_784628_1)
Tender Value
3.16 Crore
Estimated cost
Bid Submission
17 Nov 2026
14 days left
EMD
3.92 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Pname Of Work: Provn Of Double Storey School Building At Advs (Army Double Victory School) Beas Mil Station (Tender Id: 2026_Mes_784628_1)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Sep-2026 | CorrigendumNo01dated15Sep2026 | Date | 08-Oct-2026 |
| 2 | 29-Sep-2026 | DATECORRIGENDUM02DT29SEP2026 | Date | 23-Oct-2026 |
| 3 | 14-Oct-2026 | CorrigendumNo3dated14Oct2026 | Date | 10-Nov-2026 |
| 4 | 30-Oct-2026 | DATECORRIGENDUM04DT30OCT2026 | Date | 17-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Note:- Please refer Schedule 'A' Notes given on serial page No. 20 to 26 of tender documents. |
| 2 | LUMPSUM/ OTHER PRE-PRICED PROVISIONAL SCHEDULES OF WORKS |
| 3 | Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule 'A' Part-I brought forward from serial page No.27. |
| 4 | Lump sum price worked out by the contractor for SITE CLEARANCE AND EARTH WORK as listed in Schedule 'A' Part-II brought forward from serial page No. 28. |
| 5 | Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-III brought forward from serial page No. 29 to 34 |
| 6 | Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-IV brought forward from serial page No. 35 to 36. |
| 7 | Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule 'A' Part-V brought forward from serial page No. 37. |
| 8 | Lump sum price worked out by the contractor for AREA DRAINAGE WORKS as listed in Schedule 'A' Part-VI brought forward from serial page No. 38. |
| 9 | Lump sum price worked out by the contractor for ROAD PATH CULVERT WORKS as listed in Schedule 'A' Part-VII brought forward from serial page No. 39. |
| 10 | Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-VIII brought forward from serial page No. 40. |
| 11 | Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-IX brought forward from serial page No. 41 to 44. |
| 12 | Lump sum price worked out by the contractor for SUMMER AND COOLING APPLIANCES WORKS as listed in Schedule 'A' Part-X brought forward from serial page No. 45. |
| 13 | Miscellaneous items of Works (To be quoted by Bidder) as listed in Schedule 'A' Part-XIII |
| 14 | INTERNAL ELECTRIFICATION WORKS |
| 15 | Supply and fixing Supply and fixing modular metal flush box made out of GI sheet, thickness not less than 1.2mm with earthing terminal, 8 module complete all as specified and directed. |
| 16 | Supply and fixing Supply and modular dummy plate complete all as specified and directed. |
| 17 | Supply and fixing S & F single pole & neutral, modular type, double door, DB, 6 way metallic distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for DP RCCB / RCBO / Isolator / MCB as incomer and SP MCBs as outgoing, reversible metal door, 100 A copper busbar, fully shrouded neutral bar, earth bar, wire set & cable ties for cable management, pre fitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified in IS 732: 2019 Supply complete all as specified and directed.NOTES:-[i] DP RCCB/RCBO/Isolator/MCB & SP MCBs shall be measured and paid separately. |
| 18 | Supply and fixing vertical triple pole & neutral double door DB, 4 way load line distribution board TPN vertical, double door type, fixed on wall semi flush with incoming MCCB 4 poles and, busbars, neutral link, blanking plates complete with all accessories all as specified and as directed. |
| 19 | Supply and Fix TV Socket/ Telephone socket and connector complete with all necessary fitting all as specified and directed. |
| 20 | Supply and Fix for wiring with one run single core FRLS Wire, 1100 volt grade, PVC insulated and unsheathed cable with stranded copper conductor 1.5 sqmm (for inverter) drawn into existing PVC conduit with all accessories fixed concealed complete all as specified and directed.NOTE: (a) One run of 1.5 sqmm PVC FRLS multi stranded copper cable wire with seperate colour coding for inverter should be used, no extra cost will be paid in this account. |
| 21 | S & F 12W LED Surface Downlight having Luminous efficacy of > 100, input voltage range 140-270 V, input frequency 50-60 Hz complete all as specified and directed. |
| 22 | Supply and Fixing GI pipe bracket made out of GI pipe light grade 32 mm dia and bend to shape 1.5 mtr long MS clamps made out of MS flat iron (02 Nos )of size 32 x 4 mm thick compitable with bldg security light mentioned in item ser No. 45 with nuts & bolts, washers fixed to wall/pole at specified height complete all as specified and directed. |
| 23 | Supply, installation, testing & commissioning of 3-Φ, 4 Wire, AC Static Direct connected, Smart Pre-paid Energy Meters, ISI marked of different makes as per BIS-16444, with communication technology including GPRS/RF/Hybrid (RF Mesh Network+GPRS)/any other advanced technology as per CEA/TRAI regulations) with current range 10-60 Amp, 240 V, accuracy class 1.0 UC1 category and above along with in-built load control switch, containing provision for TOD & RTC, capable to define multiple tariff slabs complete all as specified and directed.Meter should support the following data:- (i) 15 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, daily and monthly billing survey for Cumulative Energy and Max Demand(ii) Meter should have connect / disconnect functionality operable for MDM/billing software and prepaid features would be operable for MDM / Billing end as per IS: 15959 Part-2.(iii) Meter should support communication protocol through RF/ 5G/4G/NB IOT with the existing software in stn all as required at site and directed (cost of 5G/4G/NB IOT sim with two year recharge facilities, mapping, vending portal charges etc deemed to included in rate quoted for meter). (iv) The meter should support open communication protocol DLMS with the existing software.Make: Anchor/L&T/HPL/Secure.Note:- (i) The smart meter would be compatiable with existing software/DCU in Stn.(ii) The rate of sim as well as data pack of 24 months from date of completion for connectivity is deemed to be including in the quated rates. |
| 24 | Supply & fixing of Transparent polycarbonate Meter Box of suitable size with IP-54 for 3-Φ, 4 wire, Smart Energy meter mentioned as per Sch. Item No. 4.20. The Polycarbonate meter box shall comply with IS-14772:2000 and IS-11000:1984. It shall be totally shock proof, safe weater proof, rust roof, dust proof, water proof, halogen free, silica free and having internally embeded gasket technology, transparent hinged lid and sealing provision including bakelite connector, complete all as specified and directed. Make: Anchor by Panasonic/L&T/ HPL/Secure. |
| 25 | Supply, installation, testing and commissioning of factory made, indoor cubical compartmental type MAIN PANEL (TTA) of suitable size for short circuit, temperature rise, protective earth short circuit test and dielectric tests of required ratings, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 42 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enameled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete as specified and directed Make: Schneider, Siemens, ABB The MLTP shall comprise of the following:A] BUSBAR CHAMBER [i] 01 Set (3L + N) of copper busbar of rated capacity 200A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection[B] INCOMING [i]125A, 415 V, Ics = 100% Icu = 25 kA, 50 Hz 4P MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 01 Nos.[ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 Nos.[iii] LED phase indicators (Red, Yellow, Blue)- 01 Set [iv] 3-phase smart energy meter-01 |
| 26 | [C] OUTGOING [i]63A, 415 V, Ics = 100% Icu = 16 kA, 50 Hz 4P MCCB, conforming to IEC 60947-2, having trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 03 Nos. [iii]20A, 230 V, Ics = 100% Icu = 10 kA, 50 Hz 2P MCB, conforming to IEC 60947-2, having trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 02 Nos. [ii]32A, 230 V, Ics = 100% Icu = 10 kA, 50 Hz 2P MCB, conforming to IEC 60947-2, having trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 01 Nos.[iv]10A, 230 V, Ics = 100% Icu = 10 kA, 50 Hz 1P MCB, conforming to IEC 60947-2, having trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 02 Nos. [v] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 08 Nos.[vi] LED phase indicators (Red, Yellow, Blue)- 08 Set Please Enable Macros to View BoQ information |
| 27 | [C] OUTGOING [i]63A, 415 V, Ics = 100% Icu = 16 kA, 50 Hz 4P MCCB, conforming to IEC 60947-2, having trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 03 Nos. [iii]20A, 230 V, Ics = 100% Icu = 10 kA, 50 Hz 2P MCB, conforming to IEC 60947-2, having trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 02 Nos. [ii]32A, 230 V, Ics = 100% Icu = 10 kA, 50 Hz 2P MCB, conforming to IEC 60947-2, having trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 01 Nos.[iv]10A, 230 V, Ics = 100% Icu = 10 kA, 50 Hz 1P MCB, conforming to IEC 60947-2, having trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 02 Nos. [v] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 08 Nos.[vi] LED phase indicators (Red, Yellow, Blue)- 08 Set Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 08, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 23, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Nov 10, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 days
Nov 17, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 14 daysNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender