Tender For Certain Repair To Flooring, Plastering, Joinery, Sanitary Fittings, Periodicals And Internal Water Supply Incl Misc Repair Works To Officer Md Accn And Old C Md Accn At Afssr Gurgaon Under Age Br (Af) Gurgaon Under Ge (Af) Gurgaon
Tender Overview
Project Description
Tender for Certain Repair To Flooring, Plastering, Joinery, Sanitary Fittings, Periodicals And Internal Water Supply Incl Misc Repair Works To Officer Md Accn And Old C Md Accn At Afssr Gurgaon Under Age Br (Af) Gurgaon Under Ge (Af) Gurgaon
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc. |
| 2 | Demolition reinforced cement concrete in roofs, floors (other than ground floors), beams staircases, landing, chajjas, Shelves and similar suspended work (reinforcement cut as required to facilitate demolition) |
| 3 | Demolition of Cement Concrete in sunken floors and pavings exc 15 cm thickness above ground level and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed. |
| 4 | Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed |
| 5 | Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and as directed |
| 6 | Dismantling Floor, Paver Tiles, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed. |
| 7 | Dismantling damaged/unserviceable Galvalume, AC and Fiber Sheeting of any gauge and thickness, complete all as specified and as directed. |
| 8 | Dismantling Structural Steel or Mild Steel Work of any description including Framed Truss, etc., complete all as specified and as directed. |
| 9 | M&L for brick work with sub class \\"B\\" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed |
| 10 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and smooth without using extra cement complete all as specified and directed.Note:- Area includes in this items upto 6 stories of building. |
| 11 | M&L for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directeNote:- Area includes in this items upto 6 stories of building. |
| 12 | Supply only integral water proofing compound. |
| 13 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts 1n patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed. |
| 14 | M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed of size 6mm with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed. |
| 15 | M&L for preparation of newly plastered surface of wall and applying Two coats of wheather proofing exterior acrylic emulsion paint over a coat of primer premium quality complete all as specified |
| 16 | M&L for three coats of white wash on New plaster surface of ceiling including prepration of surface. |
| 17 | M&L for two coats of white wash on old plaster surface of ceiling including prepration of surface. |
| 18 | M & L for 3mm thick wall care putty on wall complete all as specified and as directed. |
| 19 | M&L preparing old distempered surfaces of Walls by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applying Two Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.Note:- Complete cleaning of the rooms and window with glass pane, due to stained of painting.b) If furniture is stained with paint, all can be cleaned is wholly responsiblity of contractor without any extra payment. |
| 20 | M&L for preparing Old plastered surface of walls and Scrapping down by Mechenically and applying One coat of oil emulsion distemper white or any tint etc complete as specified and directed Note:- Complete cleaning of the rooms and window with glass pane, due to stained of painting.b) If furniture is stained with paint, all can be cleaned is wholly responsiblity of contractor without any cost. |
| 21 | M&L preparing new Distempered surfaces of Walls by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applying Two Coats of Distemper Oil Emulsion (as approved)with primer , complete all as specified and as directed.Note:- Complete cleaning of the rooms and window with glass pane, due to stained of painting.b) If furniture is stained with paint, all can be cleaned is wholly responsiblity of contractor without any extra payment. |
| 22 | M&L for preparation(complete removal of existing treatment) of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two coats of wheather proofing exterior acrylic emulsion paint over a coat of primer premium quality on wall/ceiling surface including applying 1-2mm thick wall care putty over disturbed surface during preparation of any reason, sand papering thus make surface smooth upto 4th storey buildings complete all as specified and as directed.Note : (a) Each stage of complete removal of existing treatment and preparation of surfaces after applying putty shall be got approved from Engg-In-Charge in stage passing register before applying the finishes coat.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicators of manufacturer. |
| 23 | M&L for preparation of old plastered surface of wall and applying Two coats of wheather proofing exterior acrylic emulsion paint over a coat of primer premium quality complete all as specified |
| 24 | M&L preparing old plastered surfaces of walls upto two storey , rubbing to obtained a Smooth Surface and applying one Coat of Acrylic Weather Coat Exterior Paint with approved Tint complete all as specified and as directed. |
| 25 | M&L preparing old Plastered Surfaces of Walls upto two storey by Complete Removal of existing Surfaces by mechenically complete all as specified and as directed. |
| 26 | M & L for Finishing walls with textured interior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sq |
| 27 | M&L Steel Work in Tubular Trusses including Special shaped Washer etc. complete using ERW or Induction Butt Welded Tubes, confirming to IS-1161-1979 Grade-240, complete all as specified and as directed. |
| 28 | S&F in repair Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick of 150g/cm an colour having tensile strength of 550 Mpa as in Roof Covering/ Cladding to Wall, fixed with self-tapping Screws, complete all as specified and as directed |
| 29 | M&L 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. |
| 30 | M&L 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed. |
| 31 | M&L Vitirified Ceramic Tiles 7-8mm thick (Square/Rectangular), Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. set and jointed in Neat Cement Slurry and pointed in White or Coloured Cement to match the Tiles, laid over , complete all as specified and as directed. |
| 32 | M&L Vitirified Ceramic Tiles 7-8mm thick (Square/ Rectangular) Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Cement Mortar shall deem to be include in the Quoted Unit Rate. |
| 33 | M&L vitrified Ceramic tiles light shade 7-8 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over , complete all as specified and as directed. |
| 34 | M&L Vitirified Ceramic Tiles 7-8mm thick (Square/ Rectangular) Light shade, Polished, area of each Tile exc. 0.42 Sqm but n exc 1 sqm in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Cement Mortar shall deem to be include in the Quoted Unit Rate. |
| 35 | M&L coloured non - skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 36 | M&L coloured non - skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 37 | M&L Coloured Glazed Ceramic Tiles 300x450x7mm thick in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over complete all as specified and as directed. |
| 38 | M&L Coloured Glazed Ceramic Tiles 300x600x8mm thick in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over complete all as specified and as directed. |
| 39 | M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 25cm x 25cm x 22mm thick ( as approved by GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc laid over including 15 mm thick cement screed bed in CM 1:6 . complete all as specifed and as directed |
| 40 | M&L for 15-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-In- Charge. |
| 41 | M&L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar(1:3) and pointing with white cement (1:2) usingmarble dust with admixture of pigment to match with shade of granite.complete all as specified and as directed by Engineer-In- Charge. |
| 42 | Disconnecting existing tanks, exc 250 but n exc 1000 setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleanin repairing, etc. measured separately) |
| 43 | S&F rotational moulded polythene white, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position incl S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe. |
| 44 | S&F rotational moulded polythene, triple layers, water storage tank 1000 Ltr capacity, closed top, cylindrical, hoisted and fixed in position incl S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe. |
| 45 | Cleaning and removing exc 250 but n exc 500 all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and ddirected by Engr-in-Charge. |
| 46 | Cleaning and removing exc 500 but n exc 1000 all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and ddirected by Engr-in-Charge. |
| 47 | S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. |
| 48 | S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and as directed |
| 49 | S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 15 mm bore complete all as specified and as directed |
| 50 | S&F in repair Stainless Steel Plate Rack 75x75x25 Cm in size (weight not less than 8 Kg), made out of Stainless Steel 1.0mm thick with all Internal Fittings and fixing with Brass Chomium Plated Mild Steel Screws and fixed to wall , complete all as specified and as directed. |
| 51 | M&L for 15 mm thick plaster in CM (1:4) mixed with water proofing compound on roof slabs finished even and smooth without using extra cement after cleaning of roof surfaces with wire brushes complete all as specified and directed by Engr-in-Charge. Notes : WPC shall be measured and paid seperately |
| 52 | M&L for applying evenly 3 coat of elastomeric liquid applied membrane of Home Shield PU roofkoat of Berger or equalvent as approved by Engrineer-In-Charge as in Roof portion where leakage and seepage are noticed and as directed by approved applicater. |
| 53 | M&L for preparation of new steel surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 54 | M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, roof padding, Rounded & chamferd on edges, staging of water tank, benching etc and similar nature of works mixed with water liquid proofing admixture as per manufacturer's instruction including finishing even and smooth using extra cement and rounded or chamfered on edges and necessary foamwork complete all as specified and directed by Engineer-in-Charge. Note :- (i) WPC shall be measured and paid separately. (ii) Rates include to carried out the work on roof slab upto 4th stories building & nothing extra shall be admissible on this account). |
| 55 | M&L for dismantling of existing Rubber Pressed, Glossy finsh Pre-Cast concrete interlocking tiles any shape and size of 60/80mm thickness and refixing the same after excavating/levelling the ground surface etc complete all as specified and directed.Note : If any PCC required for subbase , sand cushion will be paid seperately in appropriate item. |
| 56 | M&L for Rubber Pressed, Glossy finsh Pre-Cast concrete interlocking coloured paving block of glass fibre reinforced vibro compacted any shape and size conforming to IS-15658:2006 of 60mm thickness made with M-35 grade concrete match with grey cement and pigment etc complete all as specified and directed. |
| 57 | M&L for 25mm thick sand cushioning including watering and consolidations etc complete all as specified and directed. |
| 58 | M&L for 50 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) in sub base of floor complete all as specified and as directed . |
| 59 | M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 25mm thick in Sub-base (Levelling course for laying Tiles in Flooring), complete all as specified and as directed. |
| 60 | M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 40mm thick as in Flooring, finishing Cement Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 61 | M&L Fibre Glass Reinforced Translucent Plain Sheeting 2.0mm thick with 20 Cm Side Lap and 15 Cm End Lap, fixed with Coach Screw and Washer in Roof, Walls, MS Gates etc., complete all as specified and as directed. |
| 62 | S&F in repair for 5 to 7mm hollow , PVC Wall Panneling printed in any colour PVC sheet inclusive of solvent cement and fixing at site on PVC Frame as per specification complete all as specified and as directed.Note : Design /Pattern will be selected by GE/Engr-in-Charge. Please Enable Macros to View BoQ information |
| 63 | S&F in repair for 5 to 7mm hollow , PVC Wall Panneling printed in any colour PVC sheet inclusive of solvent cement and fixing at site on PVC Frame as per specification complete all as specified and as directed.Note : Design /Pattern will be selected by GE/Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender