Tender For special Repair To Compound Wall Near Stn Cell And Kler Enclave, Provn Of Jafri Wall Boundary Behind Hq Mb Area Pump House And Shifting Of Shed And Plinth Near Dsoi Of Age B/R-I Under Ge (P) No. 01 Jabalpur
Tender Value
43.21 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
14 days left
EMD
86500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Compound Wall Near Stn Cell And Kler Enclave, Provn Of Jafri Wall Boundary Behind Hq Mb Area Pump House And Shifting Of Shed And Plinth Near Dsoi Of Age B/R-I Under Ge (P) No. 01 Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/boulder masonry including all quoins, arches, pillars, etc, built in cement mortar complete all as specified and directed |
| 2 | M&L for brick work with fly ash bricks , straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed |
| 3 | M&L for brick work with sub class B bricks , straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed |
| 4 | M&L for brick work (except brick) with sub class B bricks , straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.Note : brick obtained from demolition shall be used. |
| 5 | Dismantling jarfi wall/RCC jallies fixed in rcc post complete all as specified and directed |
| 6 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, n exc 10 sqm on plan and n exc 1.5m in depth and getting out any type of soil complete all as specified and directed |
| 7 | Excavating over area exc 10 sqm on plan n exc 1.5m in depth and getting out any type of soil complete all as specified and directed |
| 8 | M&L for Cement concrete type D-2 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed |
| 9 | M & L for RCC (Design mix M-25) in foundations, including, rafts, footings, foundation beams, bases for columns, etc , basement slab, under reamed piles and mass concrete complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 10 | M & L for RCC M-25 design mix as in columns , pillars, piers, posts and struts etc. complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 11 | M & L for RCC (Design mix M-25) in beams, cantilevers, bressumers, lintels over 1.50 m span complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 12 | Use and waste flat formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter complete all as specified and directed. |
| 13 | Use and waste flat fair finish formwork to sides of pillars, posts, struts, piers, columns etc square or rectanguar complete all as specified and directed. |
| 14 | Use and waste flat fair finish formwork to sides and soffits of floor beams, roof beams , beam haunchings girders, lintels, cantilevers etc to plain surface complete all as specified and directed. |
| 15 | Removing excavated materials n. exc. 50 m and depositing were directed at a level n exc 1.5 mtr above the staring point complete all as specified and directed. |
| 16 | Removal of excavated material (soil) to a distance exc 50 m n. exc 250 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 17 | Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed. |
| 18 | S&F TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed. |
| 19 | S&F TMT steel bars 5mm dia and over, up to and including 10mm dia in stirrups spcers and binders complete all as specified and directed. |
| 20 | S&F framed work as in doors or gates of angle or other section with gussest plates, rails, braces, etc, complete drilled for fixing and incl steel sheeting or other covering doors etc, to be prepared for hanging and sliding with and including either hooks and hinges or steel hnging door fittings and fixing complete conferming to gde Fe 410-w complete all as specified and directed. |
| 21 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 22 | Demolition of PCC of any description and any position not otherwise provided for complete all as specified and directed. |
| 23 | M&L for Hand rails, half round or other steel section or core for woodenhand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed. |
| 24 | M&L for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and strainingand fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc.complete all as specified and directed. |
| 25 | M&L for 15 mm thick rendering in CM 1:4 on stone masonry surfaces or surfaces other than fair faces of brick work, finished fair and even complete all as specified and directed. |
| 26 | M&L for preparing plastered new surfaces of walls and applying two coats of cement base paint complete all as specified and directed. |
| 27 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone agg) as in seismic and other similar bands, coping, bed block or similar work including necessary form work complete all as specified and directed. |
| 28 | M&L for preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 29 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed |
| 30 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using late vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed |
| 31 | Supply and fixing of Concertina Coil Mild steel punched tape concertina coil with Zinc coating 450mm Ø with clips spaced 24mm dispensed in compact rolls to be laid between the 'Y' angle pickets joining by welded at 45 degree slope LAIP. complete all as specified and directed. |
| 32 | Dismantling of existing RCC louvers/jali as in wall etc complete all as specified and directed |
| 33 | M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and fair without using extra cement complete all as specified and directed. |
| 34 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces including preparation of existing wall surfaces (and removing existing treatment) complete all as specified and directed |
| 35 | M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed |
| 36 | M&L for PCC (1:2:4) type B2, (using 20 mm graded stone aggregate), as in foundations / mass concrete/ levelling course complete all as specified and directed. |
| 37 | M&L Granite slab 16 mm to 18 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:4) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing complete all as specified and directed. |
| 38 | M&L for 75mm thick PCC (1:2:4) Type C2 using 40mm graded stone agg as in plinth protection surface even and fair without using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and directed |
| 39 | Material & Labour for providing and fixing stainless steel (Grade 304) railing /moulded/ orinimantal door made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed |
| 40 | M&L for moorum/red bajri filling in floors or paving laid in layers n. exc 15 cm thick spreading levelled and blinded with earth and rammed including watering complete all as specified and directed. |
| 41 | Dimantling corrugated steel sheeting any guage thickness incl nainital or similar pattern roof covering complete all as specified and directed. |
| 42 | Fixing only sheet obtained from dismentling Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directedNote:- old sheet shall be reused retrived from item No. 41. |
| 43 | S&F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 44 | Fixing only dismanlted structure obtained from incl addn/altn as required for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.Note:- old sheet shall be reused retrived from item No. 21. |
| 45 | M&L for vitrified ceremic tiles 9 to10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.8 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed. |
| 46 | M&L for Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 47 | M&L for Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 48 | M&L for as in repair Black colour solid ACP wall lining consisting of 3mm thick plain inclusive of solvent cement /Adhesive including Alluminium frame work complete all as specified and directed |
| 49 | M&L for as in repair for SS Box type LettersHeight 12\\" to 18\\" including Led Lighting and connection up to Main Socket/DB Nos of Letters up to 40 white fixed to ACP sheet as in repair complete all as specified and directed |
| 50 | M&L for in repair LOGO 0.5 to 1.0 m height with LED module & power supply cable DB etc as in repair complete all as specified and directed |
| 51 | Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator,light fittings etc., complete all as specified and directed |
| 52 | M&L for point wiring with 1.5 Sq mm, FRLSH, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through casing caping conduit and including PVC rigid non metalic conduit of size 19/20mm, on ceiling/wall/pole / , with and including continuous 1.5 Sqmm, FRLSH, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including sunk metal sheet enclosure rectangular terminal boxes of suitable size and incl frame plate, white modular cover plates suitable for mounting modular switches, sockets etc for light and fan points complete all as specified and directed. |
| 53 | ~ditto~ all as per item No. 52 here in before but with one 3 pin, 5 amps, socket outlet on the same board. complete all as specified and directed |
| 54 | ~ditto all as per item No. 52 here in before but with one 3 pin, 5 amps socket outlet on independent board. complete all as specified and directed |
| 55 | ~ditto all as per item No. 52 here in above but with 1100 Volts grade copper stranded conductor FRLSH cable of size 2.5 Sqmm main & with 2.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp on Independent board complete all as specified and directed |
| 56 | Supply and fixing modular switch type 230/ 250 volts, 6 amps, 1 module, single pole, one way, complete all as specified and directed |
| 57 | Supply and fixing modular socket out let multi purpose 2 in 1, 2/3 pin, 6 amps,2 module flush type, ISI marked complete all as specified and directed |
| 58 | Supply and fixing switch modular 16 amps, flush type, ISI marked complete all as specified and directed |
| 59 | Supply and fixing modular socket 2/3 pin combined, 6/16 amps 2 module, flush type, ISI marked complete all as specified and directed |
| 60 | Supply and fixing ceiling rose surface bakelite, three terminal complete all as specified and directed |
| 61 | Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. complete all as specified and directed |
| 62 | M&L for taking down and refixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. complete all as specified and directed |
| 63 | Supply and fixing magnetic light upto 10 W Magnetic Track Spot Light | 500 Lumens | Warm White (WW) | Aluminium Body | 24° Beam Angle | Modular Ceiling Light including all acceseries complete all as specified and directed |
| 64 | Supply, installing, testing and commissioning out door type LT feeder piller box of suitable size, Floor mounted, CPRI approved factory made totally enclosed, dust and vermin proof, shutter in front and in rear side made of 3.15 mm thick CRCA sheet, duly fabricated and having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected and painted to both internal and external surfaces with powder coating paint in heat process of sheet and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC Plat form made out of PCC 1:3:6, 100 mm thick, 1 Mtr all round the panel board complete with the following items housed in : -BUSBAR :- (i) 200 Amps rated Aluminium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round) insulators of suitable size and good insulation resistance. complete all as specified and directedItem No. 64 contd...... |
| 65 | Item No. 64 contd......INCOMING :- (a) MCCB 3 Pole 125 Amps, 25 KA with Thermal release mechanism- 01 No (incoming)(b) Digital Voltmeter 3 Phase Class-1 50Hz - 01 No. (c) Digital Ammeter 3 Phase Class-1 50Hz - 01 No.(d) Indicator Lamps (LED type) & bakelite fuse showing R,Y, G phase - 01 set(e) Copper wound with RATED CTR - 03 NosOUT GOING:-(i) MCCB 3 Pole 63 Amps,25 KA at 415 volts - 01 No.(ii) MCB SPN 32A - 02 No.(iii) MCB SP (6 to 32 A) - 06 No.(iv) Indicator Lamps (LED type) & bakelite fuse showing R,Y, G phase - 02 setcomplete all as specified and directed |
| 66 | Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth strip 25 X 4 mm by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.complete all as specified and directed |
| 67 | S&F CPVC pipe SDR 11 , 25 mm dia including all fitting arrangement complete complete all as specified and directed. |
| 68 | M&L for taking out existing bath shower and refixing the same after cleaning as per direction of engr in charge complete all as specified and directed. |
| 69 | Supply and laying in replacement & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of size of 2 core x 6 sqmm and as per relevance IS code complete all as specified and directed. |
| 70 | Supplying and laying in replacement DWCPE pipe OD 50 mm , ID 38 mm complete all as specified and directed |
| 71 | Supply, fixing in repair for LED post top lantern 40 watt light fitting made of cast aluminium spigot housing with decorative opal acrylic diffuser with IP 65 protection complete with all accessories fixed on GI pipe 50 mm dia complete all as specified and directed. |
| 72 | Supply and fixing in repair junction box made out of polycarbonate with IP 55/IP 65 protection of size 155 x 210 x 92 mm,having terminals for termination of cable with necessary nuts and bolts , including -02 Nos polycarbonate cable gland , 01 Nos DIN rail for mounting of MCB and 01 No, MCB SP, 10 KA, 6 Amps in and including fixing clamp of FI 50 x 6mm with necessary nuts and bolts complete all as specified and directed |
| 73 | Schedule of credit of Amount Rs. 31,706.00 to be deducted during AOC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender