Tender For special Repair To Bldg No P-100 At Bmc And Addn / Altn Of Playground And Associated Works At Afcb Under Ge (C) Kolkata
Tender Value
25.85 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
18 days left
EMD
51700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No P-100 At Bmc And Addn / Altn Of Playground And Associated Works At Afcb Under Ge (C) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE ( C ) KOLKATA Name of Work: SPL REPAIR TO BLDG NO P-100 AT BMC AND ADDN / ALTN OF PLAYGROUND AND ASSOCIATED WORKS AT AFCB UNDER GE (C) KOLKATA Contract No: GE (C )/KOL/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # ItemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Dismantling of AC (corrugated, semi corrugated) sheet in roof covering incl ridges complete all as specified and directed |
| 3 | Taking down existing water proofing treatement with and including roof tiles and padding upto original roof and removing the debris from the site complete all as specified and directed |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 5 | Dismantling of stone slabs, tiles, interlocking paver blocks etc laid dry of any description or thickness in floor, aprons, etc complete all as specified and directed |
| 6 | Demolition of brick work or stone masonary built in cement mortor including all quoins & jambs etc. complete all as specified and directed |
| 7 | Taking down cement plaster of any description on brick work or stone msonary wall including racking of joints hacking for key scrubbing down with water etc. complete all as specified and directed |
| 8 | Taking down chowkhats or frames with shutters (without taking off shutter from frames) of any sizes nexc 1.5 Sqm each complete all as specified and directed |
| 9 | All as item No. 7.00 here in before but exc 1.5 Sqm and nexc 4.0 Sqm each. |
| 10 | Demolition of cement concrete (Un-reinforced) in ground floor and paving nexc 15cm thick above or below GL complete all as specified and directed |
| 11 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 12 | Dismentalling floors hearth or wall tilling including cement mortor bedding (but not backing) removing serviceble tiles to store and rubbish off the premises complete all as specified and directed |
| 13 | Dismentalling post or struts embedded in concrete, brickwork etc (wood, steel or RCC) any section, including taking out embedded portion and making good distrubed ground complete all as specified and directed |
| 14 | Dismantling fencing wire mesh, any type complete all as specified and directed |
| 15 | Taking up or down steel tubing 15mm dia and connection of 15mm bore complete all as specified and directed |
| 16 | All as per item No. 14.00 here in before but 20mm dia bore. |
| 17 | Drilling 10mm to 20mm dia holes in RCC slab, wall, column, beams to a depth of 200mm for anchoring steel reinforcement bars including washing with water, inserting polyster resin, grout in holes and all as directed and specified |
| 18 | S&F Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe-290 Gde-E165) complete all as specified and directed. |
| 19 | M&L for applying polymer modified cement mortar rendering 20mm thick in CM 1:3 on wall duly mixing polymer modifier \\"Nitobond SBR of M/s Forsoc Chemical India (Pvt) Ltd\\" or \\"Hind Styrene BR of Hindcon Chemical Ltd\\" or equivalent of M/s Pidilite Industries /Icannano @ 7 Litre per bag of cement complete finished even and smooth without using extra cement complete upto 4 storey height all as specified and as per manufacturer's specification. |
| 20 | M&L RCC (Nominal Mix) 1:1 1/2 :3 type A-1 (Using 20mm graded stone aggreagate) as in slab, shelves, Chajja supported on walls beam & coloumns in floor roof including balconies, conopies, deck slabs & shelves complete all as specified and directed.Note: (i) Reinforcement and formwork shall be measured and paid separately under relevant item of these schedule. |
| 21 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone agg as in bed blocks/hold fast complete all as specified and directed |
| 22 | Use and waste of Formwork for rough finished surfaces to sides of soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc also splays between floors and beams etc for rough finished surfaces complete all as specified and directed |
| 23 | Use and waste of Formwork to chullah hoods, chajjas, facia, troughs and similar items for rough finished surfaces including edges complete all as specified and directed |
| 24 | Material and Labour Brick work with fly ash pulverized old size bricks of designation 75, class 'A', straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 25 | M&L half brick thick brick work with fly ash bricks designation 75 (kgf/cm2) straigth or curved on plan to any radius built in CM (1:4) complete all as specified and directed |
| 26 | M&L for Mild Steel Rolled sections as in main and cross beams, hip and jack rafters; wind tie; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-290 (Gde E-165) complete all as specified and directed |
| 27 | S&F rolled mild steel (Fe-290 (Gde E 165) framed work as in door or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering , door etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging alos fastening and fixing complete |
| 28 | M&L for Mild Steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 29 | Supply and fix TMT steel bars 6-8mm dia and over and upto 10mm dia bars as in stirrups, spacers and binders cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 30 | S&F Mild Steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming Fe-290 Gde E 165 complete all as specified and directed. |
| 31 | M&L for Pressed steel frames for doors with one or more rebates size of frame 125 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.Note:-Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate. |
| 32 | M&L for Pressed steel frames for doors with one or more rebates size of frame 105 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.Note:-Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate. |
| 33 | S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to cowkhats complete all as specified and directed. |
| 34 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, fixing in opening complete all as specified and directed. |
| 35 | S&F Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, fixing in frame at site complete all as specified and directed. |
| 36 | M&L Drapery rod made of electric resistance welded MS pipe of 21mm dia having a coating of corrugated virgin PVC extrusion and cover with ABS plastic complete all as specified and directed. |
| 37 | Material & labour of 1.50mm thick power coated aluminium , three track sliding window with three nos shutters made of aluminium section as per drawing no CWE/KOL/TD-33 of section no 1F-1F including necessary jointing cleats, glazing clips, rubber neoprene packing, roller, locking arrangement, anodised aluminium snap beading screws etc. inluding glazing with 4.8 mm thick tinted glass to aluminium frame work using rubber gasket where the section of frame and shutter and Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. glazing clip, fastener etc Complete all as specified and as directed.Note :- (i) All window member including fitting & fixture i.e frame, track, shutter frame, etc shall be deem to included quoted rate. Only measure opening size of window. |
| 38 | Providing and fixing factyory made powder coated aluminium window with sliding wire cloth panel (screen window) with following specificaction(a) Handle Section - 50mm x 18mm x 1.20mm(b) Side section - 62mm x 31mm x 1.20mm(c) Top Section - 62mm x31 mm x 1.20mm(d) Bottom section - 62mm x 31mm x 1.20mm(e) PVC strip(f) Component Set(g) Magnet Male / Femanle(h) Pleated Mesh Fibre Glass |
| 39 | S&F continous (piano) hinge mild steel, bright finish or electro galvanised Width of flaps (When open) 30mm complete all as specified and directed. |
| 40 | S&F, in repair, 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished finished wooden complete all as specified and as directed. |
| 41 | S&F Machine cut kota stone slab flooring 18-20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite finish polishing complete over 20mm thick 1:4 cement mortar screed bed complete all as specified and as directed. |
| 42 | All item as per 40.00 here in before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed |
| 43 | S & F, in repair, for brass chromium plated long body bib cock with Wall Flange for 15 mm bore pipe complete all as specified and directed. |
| 44 | S&F PVC bathroom cabinet box with mirror, shutter type of size 430X330X100 mm approx with one single shutter and built in mirron in front of shutter complete all as specified & directed. |
| 45 | S&F, in repair, for UPVC (SWR) 75mm bore cowls complete all as specified and directed |
| 46 | S&F, in repair, for UPVC (SWR) 75mm bore bend any radius complete all as specified and directed |
| 47 | S&F, in repair, for UPVC (SWR) 110mm bore bend any radius complete all as specified and directed |
| 48 | S&F in repair for single socketed UPVC (SWR) pipe 75mm bore with rubber ring joint any radius complete all as specified and directed |
| 49 | S&F, in repair, for single socketed UPVC (SWR) pipe 110mm bore with rubber ring joint any radius complete all as specified and directed. |
| 50 | M&L 18/19 mm thick Medium density fibre board, exterior grade, fixed to timber framework with screws complete all as specified and directed. |
| 51 | M&L, in repair, for diameter of outlet 75mm UPVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed |
| 52 | S&F triple layer PVC water storage tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25mm outer diameter for CPVC pipe & making connection for inlet and outlet including dismental of old water tank and removing from site. complete all as specified & directed. |
| 53 | M&L complete removal of old decorated ceiling surfaces and applying 3 coat of white wash complete all as specified and directed. |
| 54 | M&L Preparing new Surfaces of Ceilng and applying Three Coats of White Wash, complete all as specified and as directed. |
| 55 | Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc. or for cable protection not exc. 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed. |
| 56 | Excavation in post holes (or similar holes) each nexc 0.50cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer nexc 25cm in hard dense / dense soil complete all as specified and directed |
| 57 | S&F for 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as specified in SSR Part-I 2009.complete all as specified and directed. |
| 58 | M&L for drapery rod made of electric resistance welded MS pipe of 21mm dia having a coating of corrugated virgin PVC extrusion and coer with ABS plastic complete all as specified and directed |
| 59 | Supply and fixing of end finials for drapery rod and including closed type stainless steel all brackets fixed on wall complete all as specified and directed. |
| 60 | S&F 100mm Butt hinges, extruded brass, with brass hinge pin, bright polished, complete all as specified and directed |
| 61 | S&F Aluminium anodised, barrel tower bolts of extruded section 200mm long complete all as specified and directed |
| 62 | M&L for applying polymer modified cement mortar rendering 20mm thick in CM 1:3 on wall duly mixing polymer modifier \\"Nitobond SBR of M/s Forsoc Chemical India (Pvt) Ltd\\" or \\"Hind Styrene BR of Hindcon Chemical Ltd\\" or equivalent make of M/s Pidilite Industries @ 7 Litre per bag of cement complete finished even and smooth without using extra cement complete all as specified and as per manufacturer's specification. |
| 63 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of 300mm long complete all as specified and directed |
| 64 | S&F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed |
| 65 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150mm long complete all as specified and directed |
| 66 | M&L Mild Steel Work in Tubular /hollow section as in Trusses and post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-4923 grade YSt.-240 complete all as specified and as directed. |
| 67 | Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm as in Soft/Loose Soil, complete all as specified and as directed. |
| 68 | Removing excavated Material (Soil) not exc. 50.00 Metre and depositing where directed and spreading and levelling in layers nexc 25 with well ramming including watering complete all as specified and as directed. |
| 69 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed |
| 70 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (Hi-Rib 30/200 profiled cold formed curved sheet. The profiled sheet having the total width 1060mm, rough depth 30mm and pitch 200mm C/C)as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed |
| 71 | Material and labour for cement concrete Type C-2 (1:3:6) (using 40mm graded stone agreegate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 72 | Material and labour for cement concrete Type D-2 (1:4:8) (using 40mm graded stone agreegate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 73 | M&L 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of floor complete all as specified and directed |
| 74 | M&L for 25mm thick prepolished coloured PCC chequred tiles of size 400x400x25mm set and jointed in neat cement slurry and pointed in coloured cement tom match the shade of tiles with and including 20mm thick screed bed in CM 1:6 complete all as specified and directed |
| 75 | Labour only for relaying of 60mm thick interlocking paver block complete all as specified and directed |
| 76 | M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 77 | M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection laid in panels, finish the top surfaces even and smooth without using extra cement complete all as specified and directedNote:- Construction joints will be provided at interval of 2.5m length and filled with bitumen 80/20 mix with sand in ratio of 1:3 and cost of the same shall be deemed included in quoted rate |
| 78 | M&L 25mm thick PCC (1:2:4) base type B-0 (using 12.50mm graded stone aggregate) as in base of tiles flooring complete all as specified and directed. |
| 79 | M&L providing precast reinforced cement concrete 1:2:4 type B-0 (using 12.50mm graded stone aggregate) as in louvers and Jallies, 50mm thick (measured solid) including all mouldings, reinforcement etc and set in cement mortar 1: complete all as specified and directed |
| 80 | M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 81 | M&L joint free non skid ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 82 | All as item No. 80.00 here in before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed. |
| 83 | M&L glazed ceramic coloured tiles 450x300x6-7mm in vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed |
| 84 | M&L granite slab 16-18mm thick of any type work table rubbed and polished in kitchen platforms, window cills and like over and including cement screed bed 15mm thick in CM (1:6) bedded and jointed with grey cement slurry and pointed with white cement mortor (1:2) using marble dust with admixture to match with shade of granite complete all as specified and directed |
| 85 | M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished the surfaces even and fair without using extra cement complete all as specified and directed. |
| 86 | M&L rendering 15mm thick in CM (1:4) on other than fair faces of brick work or concrete surfaces even & smooth without using extra cement complete all as specified and directed |
| 87 | M&L rendering 15mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & smooth without using extra cement complete all as specified and directed |
| 88 | M&L rendering 5mm thick in CM (1:3) as in ceiling surfaces even & smooth without using extra cement complete all as specified and directed |
| 89 | \\"Supply only\\" liquid water proofing compound (ISI marked) complete all as specified and directed.Make:- STP NO 1/ PEDILITE(DR FIXIT)/ FOSROC/ CICO/ SIKA |
| 90 | M&L complete removal of existing treatment of wall and preparing old surface and applying 2 coat of oil bound distemper over a coat of primer (Asian Paint / Berger Paints) including a coats of white cement based putty (1mm thick) complete all as specified and directed. |
| 91 | M&L preparing newly plastered surfaces of wall and applying 2 coat of oil bound distemper over a coat of primer including approx 1.5mm thick water based putty complete all as specified and directed. |
| 92 | M&L complete removal of old decorated surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (Two or more coats applied @ 1.43 ltr/10 sqm) over and including priming coat of exterior primer (applied @ 2.20 kg/10 sqm) complete all as specified & directed. |
| 93 | M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (Two or more coats applied @ 1.43 ltr/10 sqm) over and including priming coat of exterior primer (applied @ 2.20 kg/10 sqm) complete all as specified & directed. |
| 94 | M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 95 | M&L for preparation of new surfaces of steel and steel based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 96 | S&F for 20mm outer diameter CPVC pipes SDR 11 & including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 97 | S&F for 25mm outer diameter CPVC pipes SDR 11 & including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 98 | S&F for 40mm outer diameter CPVC pipes SDR 11 & including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 99 | Cutting chase, pinning in making good to facing where required and pointing in CM 1:3 to end or edges of landing steps, cills, sunshades, shelves, lintels etc. and cutting chase for conceled water pipe etc. and making good (cutting not exc 10Cm girth) complete all as directed |
| 100 | Supply and fixing in repair Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white (excluding flushing cistern and flush pipe) including plastic water closet seat, white colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and as directed. |
| 101 | M&L for providing plain cement concrete (1:2:4) type B-0 (Using 12.50mm graded stone aggregate) as in padding and benching & filleting all as specified and directed. |
| 102 | S&F in repair vitreous china wash hand basin white of size 550 x 400mm excluding taps but including 32mm PTMT waste coupling (excluding 32mm waste pipe) complete all as specified and directed. |
| 103 | M&L for 10mm thick screed bed or bedding over roof surfaces when concrete is still green with and including WPC in cement mortar 1:3 complete all as specified and directedNote :- WPC shall be measured paid separately |
| 104 | Preparation of plastered surfaces of roof and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt laying over a coat of bituminous primer @ 0.40 Ltr / Sqm and two coats of Bitumen based UV reflective paint with aluminium finish over APP membrane. The membrane shall be laid using butane torch and sealing all joints etc all as specified and directed. |
| 105 | S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and as directed. |
| 106 | Providing and laying in repair 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size / shape, made by table vibratorty method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filing the joints with sand and cutting of paver blocks as per requiement size and pattern, finishing and sweeping extra sand. |
| 107 | S&F in repair PVC flusing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC and making good disturbed area complete all as specified and as directed. |
| 108 | S & F, in repair, 15mm bore brass chromium plated fancy type Angular Valve with Wall Flange complete all as specified and directed. |
| 109 | S & F, in repair, brass chromium plated two in one tap with Wall Flange screwed for 15 mm bore pipe complete all as specified and directed. |
| 110 | S&F, in repair, ABS Body chrome plated shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed. |
| 111 | S & F, in repair, shower arm 240mm long round shape with flage including fixing to steel pipe or union complete all as specified and directed. |
| 112 | S & F, in repair, 600mm long Towel Rail chromium plated 20mm dia fixed with screw complete all as specified and directed. |
| 113 | S & F, in repair, chromium plated Health faucet with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer). Complete all as specified and directed |
| 114 | S&F, in repair, PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and directed |
| 115 | Taking down point wiring (light, fan, socket and power complete including fixtures and fittings such as switches ceiling roses, pendents , regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody for refixing or for taking credit (credit for above items should be made as per conditions separately) and making good distrubed surfaces of walls, floors, etc. including cleaning all and specified and directed. |
| 116 | M&L for Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC concealed conduit 20mm dia medium duty with all accessories including fabricated 1.6 mm thick MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly includingCutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 all as specified for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan/call bell point/ Switch socket outlet 5 amps complete all as specified and as directed.Note : Cost of cutting chases, making good and finishes shall be deemed to be included in quoted rate |
| 117 | All as per item No 115.00 here-in-before but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by Engineer-in-charge. |
| 118 | All as per item No. 115.00 here-in-before but one 3 pin 5 amps switch socket outlet on the independent board with other switch complete all as specified and directed by Engineer-in-charge. |
| 119 | All as per item No. 115.00 mentioned here-in-before but using 2.5 sq mm size stranded copper conductor cable for one 16Amp switch, socket outlet point on independent bord complete PVC insulated and unsheathed copper condutor earth continuity conductor to common earth and connecting to earh dolly as specified and directed by Engineer in charge |
| 120 | S&F modular switch, one way, 6Amp, 1 module complete all as specified and directed |
| 121 | S&F socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed |
| 122 | S&F modular switch 1 way 16A, 1 Module complete all as specified and directed |
| 123 | S&F modular switch outlet 2 in 1, 3 pin 5 Amps on the same baord with other switch complete all as specified and directed by Engr-in-Charge |
| 124 | S&F Modular Bell push switch 6A 1 Module complete all as specified and directed |
| 125 | S&F call bell, ding dong AC 230 Volts, single pole complete all as specified and directed |
| 126 | S&F Ceiling rose surface bakelite 65x50mm three terminals 240 volts complete all as specified and as directed. |
| 127 | S&F Ceiling Fan regulator step type 240 Volt modular complete all as specified and directed by the Engr-in-Charge. |
| 128 | S&F Energy efficient LED fittings of capacity 1 x 10W suspended type / wall mounted type complete with LED tube Lamp and fitting with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length complete all as specified and as directed. |
| 129 | S&F Energy efficient LED fittings of capacity 1 x 20W batten type complete with LED tube Lamp and fitting with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length complete all as specified and as directed. |
| 130 | S&F LED bulb 9W in bulb complete all as directed and specified by Engr-in-Charge |
| 131 | S&F LED fittings with lamps 35 watts for bldg security light IP-66 power coated pressure die cast aluminium compact high power LED street light with compact size and rough design 32mm GI bend including taking down one as specified and directed |
| 132 | S&F MCB 6 to 32 Amps, SP, 240 Volts , 'C' curve breaking capacity 10 kA complete all as specified and as directed. |
| 133 | S&F MCB 32 to 63 Amps, DP 240 Volts ,C- Curve breaking capacity 10 KA including necessary connection complete all as specified and as directed. |
| 134 | S&F sheet metal enclosure distribution board SP&N, 16 way, double door, powder coated, protection class IP-42, suitable for mounting MCB, DBs confirming to IS-13032, IS-8632, BS-5484 with min 200 Amp rating copper bus bar, complete all as specified & directed. Note:(i) Cost of thimbles for connecting cable to MCCBs/MCB and making good disturbed surface is included in this item and nothing will be paid extra on this account.(ii) Cost of dismantling DB and MCBs and refixing the functional MCBs is also included in this item and nothing will be paid extra on this account. |
| 135 | S&F of decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9W LED lamp B22 base complete all as specified and directed.Make Havells Cat No. LHFOECE1TZ1O014 or equivalent |
| 136 | Taking down of ceiling fan/ exhaust fan of any sweep for cleaning and refixing of fan at same location or any other situation after minor repair complete all as specified and as directed. |
| 137 | S&F louver of exhaust fan including taking down of old one in bldg incl all safety arrangment required complete all as specified and directed |
| 138 | Taking down and refixing geyser using anchor fastener bolt complete with elctrical and water connection complete all as specified and directed |
| 139 | M&L for stainless steel threaded pipe suitable for geyser complete all as specified and directed |
| 140 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheating of PVC tape armoured with galvanished steel wire or tape and overall PVC sheathed 16sqmm 3 core nominal cross setio complete all as specified and directed |
| 141 | Supply, laying and testing PVC insulated PVC sheathed cable galvanized steel strip or wire armoured, electric control cable (Heavy Duty) with stranded copper conductor of size 1.5sqmm 3 core, 1100 volts grade complete all as directed |
| 142 | M&L rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bens, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock, nuts, saddles, pipe hooks etc complete all as directed |
| 143 | S&F post top latern LED type 20Watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resisatance complete with driver and lamp complete all as directed |
| 144 | S&F time switches 250V single pahse of 20Amp rating with contactor fitted inside steel enclose complete all as specified and directed |
| 145 | S&L GI pipe light grade 40mm bore including all fittings in trenches/boundary wall complete all as directed |
| 146 | M&L for PCC type B2 (1:2:4) graded 40mm for foundation or other situation as specified and directed Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender