Tender For Comprehensive Maintenance Of Internal E/M Items At Md Offr Accn Anuj Nayyar Vihar, Capt Anuj Nayyar Road, cement concrete Hut, Cpg, Mech C , Mech Trg Area, Aviation, Claws, Ge (East) Office, Bso Yard, Central Aminities, Offrs Mess, Institu
Tender Value
49.89 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
14 days left
EMD
99780
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Of Internal E/M Items At Md Offr Accn Anuj Nayyar Vihar, Capt Anuj Nayyar Road, cement concrete Hut, Cpg, Mech C , Mech Trg Area, Aviation, Claws, Ge (East) Office, Bso Yard, Central Aminities, Offrs Mess, Institutes, Huts And Connected Areas Under Anuj Nayyar Vihar Service Centre In The Aor Of Age (E/M) Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully copper/ aluminum point wiring light/ fan/ bell/ socket/ power complete including conduit, fittings and making good the disturbed surfaces of Walls/ floors/ ceiling complete all as specified & directed by Engr in charge. |
| 2 | M&L for point wiring complete with 1.5 Sqmm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked drawing in and incl PVC concealed/Surface conduit and PVC conduit fitting including drawing FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with existing/new and incl Metal flush box of suitable size with hylem/modular sheet with cover plate for fixing modular/piano type switches/sockets/fan regulator etc complete all as directed for the following:- |
| 3 | One light point/ fan point/ bell point controlled by one switch |
| 4 | One socket outlet 5 Amps controlled by one switch on same board |
| 5 | One socket outlet 5 amps controlled by one switch on independent board |
| 6 | Description all as per item No. 2.00 here in before but wiring with 4 sqmm copper wire and 4 sqmm earth wire for power point socket outlet on independent board (Max 2 power point in each circuit of any length). |
| 7 | Description all as per item No. 2.00 here in before but wiring with 4 sqmm copper wire and 4 sqmm earth wire for AC/Geyser socket outlet on independent board. (Saperate circuit of any length from DB for each point) |
| 8 | S & F switch piano flush type 5 Amps SP one way all as specified. |
| 9 | S & F socket outlet 2-in-1,5 Amps flush type 3 pin 5 Amps multi purpose all as specified. |
| 10 | S & F switch piano type 15 Amps SP one way all as specified. |
| 11 | S & F socket outlet 2 in 1 (multipurpose) 3 pin 5 and 15 Amps flush mounted type all as specified. |
| 12 | S&F in replacement modular switch flush type, 6 amps one way,SP,230 volts AC all as directed. |
| 13 | S&F in replacement modular switch flush type, 16 amps one way,SP,230 volts AC all as directed. |
| 14 | S&F in replacement modular switch bell push flush type, 6 amps one way,SP,230 volts AC all as directed. |
| 15 | S&F in replacement modular socket outlet 6 amps 5 pin 2 module all as directed. |
| 16 | S&F in replacement modular socket outlet 6 & 16 amps 6 pin multipurpose combined 2 module all as directed. |
| 17 | S&F in replacement modular Step Fan regulator, 120 watts single / double module all as directed. |
| 18 | S&F in repair Modular white cover plate with frame 1 module all as directed |
| 19 | S&F in repair Modular white cover plate with frame 2 module all as directed |
| 20 | S&F in repair Modular white cover plate with frame 3 module all as directed |
| 21 | S&F in repair Modular white cover plate with frame 4 module all as directed |
| 22 | S&F in repair Modular white cover plate with frame 6 module all as directed |
| 23 | S&F in repair Modular white cover plate with frame 8-18 module all as directed |
| 24 | S&F in repair Modular Metal Flush Box 1/2 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed |
| 25 | S&F in repair Modular Metal Flush Box 3 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed |
| 26 | S&F in repair Modular Metal Flush Box 4 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed |
| 27 | S&F in repair Modular Metal Flush Box 6-18 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed |
| 28 | S&F in replacement ceiling rose surface bakelite 65 x50mm with two to three terminals. |
| 29 | M & L in replacement PVC Plug top, 3 pin 5 Amp (ISI marked as directed. |
| 30 | M & L in replacement PVC Plug top, 3 pin 15 Amp (ISI marked as directed. |
| 31 | S & F in replacement of lamp holder bakelite insulated body with back plate suitable for batten fitting all as specified. |
| 32 | M & L in replacment of fan regulator stepped electronic flush type suitable for 1200/1400 mm sweep fan as per existing pattern. |
| 33 | M & L in replacement of Bell ding dong AC, 230 volts single pole all as specified. |
| 34 | M & L in replacement of MCCB, 4 Pole, 100 Amps, 16 KA, AC ,415V including spreader and electric connection complete all as specified and as directed |
| 35 | M & L in replacement of MCCB, 4 Pole, 125 Amps, 16 KA, AC ,415V including spreader and electric connection complete all as specified and as directed |
| 36 | M & L in replacement of MCCB, 4 Pole, 160 Amps, 36 KA, AC ,415V including spreader and electric connection complete all as specified and as directed |
| 37 | M & L in replacement of MCCB, 4 Pole, 200 Amps, 36 KA, AC ,415V including spreader and electric connection complete all as specified and as directed |
| 38 | M & L in replacement of MCCB, 4 Pole, 250 Amps, 36 KA, AC ,415V including spreader and electric connection complete all as specified and as directed |
| 39 | M & L in replacement of MCCB, 4 Pole, 63 Amps, 16 KA, AC ,415V including spreader and electric connection complete all as specified and as directed |
| 40 | M & L in replacement of MCCB, 4 Pole, 630 Amps, 50 KA, AC ,415V including spreader and electric connection complete all as specified and as directed |
| 41 | S&F of MCB DB conforming to IP 43 - IK 09 with single door, SPN 04 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces. |
| 42 | S&F of MCB DB conforming to IP 43 - IK 09 with single door, SPN 08 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces. |
| 43 | Material and labour for replacement of submain wiring complete with 2 x 10.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 10 sqmm( same specification ) as earth wire in existing PVC conduit complete all as directed |
| 44 | Material and labour for replacement of submain wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4 sqmm( same specification ) as earth wire in existing PVC conduit complete all as directed |
| 45 | M & L for earthing complete with GI earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25 mtrs below ground level, with top edge of the plate not less than 1.5 mtrs deep below normal ground level, connected to galvanised earth wire 4mm by means of bolts, nuts check nuts to earth test point including necessary PCC 1:2:4 type B-1 pit, cover frame, GI pipe 15mm dia light grade with funnel and locking arrangement all as specified and directed by Engr-in-Charge. |
| 46 | Supply, Laying & Testing in trenches in replacement of LT UG XLPE cable 10 sqmm 2 core 1100 volts grade armoured with aluminium conductor ISI marked all as specified and directed by the Engr-in-charge. |
| 47 | Supply, Laying & Testing in trenches in replacement of LT UG XLPE cable 16 sqmm 2 core 1100 volts grade armoured with aluminium conductor ISI marked all as specified and directed by the Engr-in-charge. |
| 48 | Excavation in trenches in loose/soft soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out including forming bottom surface for laying LT cable as specified and directed at site by Engineer-in-Charge. |
| 49 | Returning filling in soil including spreading, levelling, watering and well rammingin layers not exceeding 25 cm complete as specified and directed by the Engr-in-charge. |
| 50 | Removing exccavated soil not exceeding 50 mtr and depositing wheredirected at a level not exceeding 1.5 mtr above the starting point, complete. |
| 51 | M&L for sand cushioning to under ground cable provided with layers of sand (8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge. |
| 52 | Supply and laying burnt bricks class - B for profection of cable complete all asspecified and directed at site. |
| 53 | M & L in replacement of MCB SP 10 to 32 Amps,230V, 10 KA C curve all as specified |
| 54 | M & L in replacement of Isolator SPN 40 Amps, 240 volts as specified |
| 55 | M & L in replacement of Isolator SPN 63 Amps, 240 volts as specified |
| 56 | M & L in replacement of single pole and neutral metal clad sheet steel enclosures with 2 pin and earth plug and socket complete with MCB SP 20 Amps. Make :-Havells//ABB/HPL |
| 57 | S & F of LED batten luminaire surface mounted with aluminium housing & PC diffuser ,4 feet system wattage of 20 watts initial lumen maintained CRI>80, Power Factor >0.9, THD<20%, colour temperature-6500K, surge Protection 2.5 KV in CM, IP-20 protected, meets LED IS specified,Class-1, short circuit and over circuit protection ,voltage range -140 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiency at luminaire level >120 Lumen/watts and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 58 | S & F of LED batten luminaire surface mounted with aluminium housing & PC diffuser , 2 feet system wattage of 10 watts not less than 1200 lm initial lumen maintained CRI>80, Power Factor >0.9, THD<20%,colour temperature-6500K,surge Protection 2.5 KV in CM,IP-20 protected, meets LED IS specified,Class-1, short circuit and over circuit protection , voltage range -140 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiency at luminaire level >120 Lumen/watts and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 59 | Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC, 2700/4000/6500K recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 60 | Supply and fixing of LED ceiling light fitting 15 watt, in round/Square shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed. |
| 61 | S&F of wall mounted fan 400mm sweep, Copper winding, 240 Volts. 50 Hz and depositing the old u/s to mes store yard, complete all as specified and as directed. |
| 62 | Supply and fixing in replacement of garden light fitting globe type with gallary suitable for mounting on 32/40 mm GI pipe with 9Watt LED lamp warm/cool B22 base including necessary electric connections complete all as specified and as directed. |
| 63 | S & F in replacement garden light pole GI pipe medium grade 40mm dia, suitable for fixing of garden light fitting including painting with black synthetic enamel paint (2 coat) over a coat of red oxide primer complete all as specified and directed. |
| 64 | M&L Cement concrete in foundations, filling and mass conc in ratio 1:3:6 type C2 with 40mm stone graded complete all as specified. |
| 65 | Supply and fixing in replacement of wall light fitting with and including 9 watt Cool/ Warm/ normal LED lamp complete all as directed. Make - Phillips Glow/Trumpet or equivalent in Crompton/ Bajaj/ Havells/ Eveready |
| 66 | S & F in replacement of energy efficient LED fittings 45W LED suitable for building security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed. |
| 67 | Supply and fixing in replacement of street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed. |
| 68 | S&F in replacement of LED bulbs 9W, B 22/E14/E27 90-300V AC-50 Hz complete all as directed. Make: Sysks/Havells/Philips |
| 69 | S&F in replacement of bulk head fitting 6.5 W with PMMA diffuser complete all as specified and directed. |
| 70 | S&F in replacement of high pressure booster pump with 8 ltr capacity pressure tank, coupled with electric motor of capacity 0.50 HP, 230 volts, single phase, 50 Hz incl Pressure Guage, Pressure switch & connecting accessories of GI i.e bend, nipple, socket, tee of requisite size etc incl cutting of existing pipe, complete all as specified and as directed. Make: Usha/CG/V Gard/Khaitan/CR/Leader. |
| 71 | S & F in replacement of Ventilating fan 250/200 mm sweep plastic body type including self cosing louver and making all electric connections, complete all as specified and as directed. |
| 72 | S & F in replacement of LED post top lantern fitting powder coated aluminium die cast and spun aluminium with clear/opal diffuser 36 Watt including LED driver with gallary suitable for mounting on 32/40 mm GI pipe including necessary electric connections complete all as specified and as directed. |
| 73 | S&F in replacement of picture light of 12 Watts, 450/600 mm length metal body suitable for focus on Name plates/paintings, complete all as specifed and as directed. Please Enable Macros to View BoQ information |
| 74 | S&F in replacement of picture light of 12 Watts, 450/600 mm length metal body suitable for focus on Name plates/paintings, complete all as specifed and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender