Tender For Special Repair To Communication Complex, Mb Area (Bldg No. P-4) By Replacement Of Complete Asbestos Sheets With Pre Painted Zinc Coating Galvanized Red Steel Sheet And False Ceiling (54X260) At Mb Area Sig Coy Under Ge (P) Jabalpur
Tender Value
45.20 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
19 days left
EMD
90500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Communication Complex, Mb Area (Bldg No. P-4) By Replacement Of Complete Asbestos Sheets With Pre Painted Zinc Coating Galvanized Red Steel Sheet And False Ceiling (54X260) At Mb Area Sig Coy Under Ge (P) Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Battens for tiles, shingles etc, spaced exc 15 cm of any size including tilting fillets complete all as specified and directed. |
| 2 | Dismantling Single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed. |
| 3 | Dismantling timber scantlings under 40 sq. cm and over in section, in fillets, rails, posts, rafters, purlins, in any position complete all as specified and directed. |
| 4 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 5 | Taking down Cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 6 | Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and removing debris and depositing complete all as specified and as directed. |
| 7 | Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 8 | Dismantling timber scantlings 40 sq. cm and over in section, in any position in unframed/framed work complete all as specified and directed |
| 9 | Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each complete all as specified and directed. |
| 10 | ~ditto~ All as per item No 9 above but exc 1.50 Sqm n.exc 4 Sqm complete all as specified and directed. |
| 11 | M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortor 1:6 complete all as specified and directed. |
| 12 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 13 | M&L for Cement concrete type D-2 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 14 | M&L for Providing, cement concrete type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, coping, Hold fast complete all as specified and directed. |
| 15 | M&L Granite(of any type)tiles 16 to 18 mm thick as in any position and similar works over 10mm thick cement screed in CM 1:4, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone incl cutting, polishing complete all as specified and directed. |
| 16 | M&L for Vitrified Ceramic tiles (light shade)10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand coloured tiles laid over and including 20 mm thick screed bed in CM 1:4 to recieve tiles complete all as specified and directed. |
| 17 | M & L Vitrified Ceramic tiles (light shade10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 Sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand coloured tiles laid over and including 10mm thick backing coat in CM 1:4 to recieve tiles complete all as specified and directed. |
| 18 | S&F 10 mm thick paver tiles out door vitrified tiles area n. exc 0.36 sqm each as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed in CM(1:6) complete all as specified and directed. |
| 19 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length including fastenar of 100 mm long 10 mm dia complete all as specified and directed. |
| 20 | S&F , Factory made single/double extruded WPC (Wood Polymer Composite) solid decorative prelam both side flush door 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, fixed with eye hole and good quality lense all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and directed. |
| 21 | S&F SS butt hinges100mm long medium weight, cold rolled complete all as specified and directed. |
| 22 | S&F 200 mm long extruded SS handles, fabricated type complete all as specified and directed. |
| 23 | S&F 300mm SS sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast SS alloy complete all as specified and directed. |
| 24 | S&F 200mm long SS barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 25 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 26 | S&F 4.00 mm thick sheet glass ordinary/tinted quality and glazing complete in square nexc 0.50sqm each complete all as specified and directed. |
| 27 | M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters/frame of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions complete all as specified and directed. |
| 28 | M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 29 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 30 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channelor flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 31 | M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Creosote complete all as specified and directed. |
| 32 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 33 | S& F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 34 | S & F in repair suspended false ceiling system using chicago metallic (E grid) exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24 mm X 0.8 mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2 mm X 22.2 mm X 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture complete all as specified and directed. |
| 35 | M& L preparation of old painted wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth applying two coats of synthetic enamel paint complete all as specified and directed. |
| 36 | M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 37 | M&L for preparation of old surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 38 | M&L for 15 mm thick cement plaster in CM 1:6 on internal surfaces of fair faces of brick work or concrete surfaces with finished surfaces even and smooth with out using extra cement complete all as specified and directed. |
| 39 | M&L for cement concrete 75mm type C-2 1:3:6 as in plinth protection complete all as specified and directed. |
| 40 | S&F 12mm thick toughened designer glass fixed on steel pivot all as approved sample with engravings/ designs/ symbols to the pattern and style as approved complete all as specified and directed. |
| 41 | S&F Handles of senso (as per 3D designs) 150 mm including all connection fitting as complete all as specified and directed and approved by GE complete all as specified and directed. |
| 42 | M&L for Distempering with 1st quality acrylic distemper (ready mixed) washable, antifungal having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work/old surfaces of wall/ceilingas per manufacturer instructions applied over priming coat with fully automatic airless spary machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surfaces in both the coats of paint, complete all as specified and pattern directed. |
| 43 | Material & Labour for applying Two or more coats of 100% on new/ old surfaces of wall/fascia etc Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces as per manufacturer instructions applied over priming coat with fully automatic airless spary machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surfaces in both the coats of paint, complete all as specified and pattern directed. (upto 5 storey) |
| 44 | M&L for water proof cement based putty @ 1 Kg (undiluted) per sqm mtr on layers over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surfaces free from dust etc by skilled labour as per following steps:- (1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with mixing capacity of min 2.5 kg putty per minute.(2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI.(3) Allow 6-8 hrs time to dry the putty surfaces complete all as specified and directed |
| 45 | M&L for Complete removal of existing treatment of wall/ceiling complete all as specified and directed |
| 46 | Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator,light fittings etc., complete all as specified and directed. |
| 47 | M&L for point wiring with 1.5 Sq mm, FRLSH, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through concealed conduit and including concealed PVC rigid non metalic conduit of size 19/20mm, on ceiling/wall, with and including continuous 1.5 Sqmm, FRLSH, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including sunk metal sheet enclosure rectangular terminal boxes of suitable size and white cover plates suitable for mounting modular switches, sockets etc and making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces for light pointscomplete all as specified and directed. |
| 48 | ~ditto~ all as item No 47 but for one Fan Point controlled by one switch. complete all as specified and directed. |
| 49 | ~ditto~ all as item No 47 but for one Bell Point controlled by one switch. complete all as specified and directed. |
| 50 | ~ditto~ all as item No 47 here in before but with one 3 pin, 5 amps, socket outlet on the same board. complete all as specified and directed. |
| 51 | ~ditto~ all as item No 47 here in before but with one 3 pin, 5 amps socket outlet on independent board. complete all as specified and directed. |
| 52 | Description same all as per item No. 47 here in above but with 1100 Volts grade copper stranded conductor FRLSH cable of size 2.5 Sqmm main & with 2.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp on Independent board complete all as specified & directed by Engineer-in-Charge. |
| 53 | M&L of Sub main wiring in repair with two single core PVC Insulated cable two run of size 4.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 4.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire complete all as specified & directed by Engineer-in-Charge.Including taking down old unsv .Note : - Two run of 4 Sqmm & one run of 4 Sqmm cable and one run of conduit shall be measured as one unit run. |
| 54 | M&L of Sub main wiring with two single core PVC Insulated cable two run of size 6.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 6.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire complete all as specified and directed. Note : - Two run of 6 Sqmm & one run of 6 Sqmm cable and one run of conduit shall be measured as one unit run..Including taking down old unsv. |
| 55 | Supply and fix in replacement modular bell push, 1 module, 6 amps, complete all as specified and directed. |
| 56 | Supply and fix bell AC 230 volts, single pole complete all as specified and directed. |
| 57 | Supply and fix in replacement modular switch type 230/ 250 volts, 6 amps, 1 module, single pole, one way, complete all as specified and directed. |
| 58 | Supply and fixinf in replacement modular socket out let multi purpose 2 in 1, 2/3 pin, 6 amps,2 module flush type, ISI marked complete all as specified and directed. |
| 59 | Supply and fixing in replacement switch modular 16 amps, flush type, ISI marked complete all as specified and directed. |
| 60 | Supply and fixing in replacement modular socket 2/3 pin combined, 6/16 amps 2 module, flush type, ISI marked complete all as specified and directed. |
| 61 | Supply and fixing ceiling rose surface bakelite, three terminal complete all as specified and directed. |
| 62 | Supply and fixing in replacement Smart bright Batten Series, LED luminaire using LEDs 22/20 watt, natural white, 2200 Lumen, THD max 10 % ,CRI min 80 % with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start ,with 3 core flexible copper wire 1.5 sqmm and connecting accessories ,Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification .Including taking down old unsv .complete all as specified and directed. |
| 63 | Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified and directed. |
| 64 | Maintenance and checking of ceiling fan/exhaust fan of any size/type/make, checking the serviceability of all parts, electric connections etc. Preparation of old painted surfaces and painting with two coats of synthetic enamel paint of approved shade, reconnecting/hanging in original position, reconnecting the electric cables and testing complete all as specified and directed. |
| 65 | Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 66 | Supply and Fixing lamp holder Surface PVC type including 9 watt LED bulb complete all as specified and directed. |
| 67 | Supply and fixing in replacement LED street light / security light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection ccomplete all as specified and directed. |
| 68 | Supply and fixing I LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed/surface type, as directed, with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 69 | S&F in repair LED bulk head luminaires 10 W 6000k Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED uminaire comprising of high brightness LEDs. complete all as specified and directed. |
| 70 | S&F in replacement of single core wire 1.5 Sqmm multi-strand PVC insulated copper conductor FRLS or suitable cable for inverter connection including connections of cable withsuitable points complete all as specified and directed. |
| 71 | Supply and fixing rigid non metallic, medium grade, PVC conduit, concealed type of size 25 mm with all accessories such as couplers, lock nuts, saddles, pipe hook, tees, bends, etc., including cutting chases for conduits and making good the disturbed surface with PCC as per site requirement complete all as specified and directed. |
| 72 | Supply and fixing in replacement modular stepped type electronic fan regulator flush type, two module on the existing phenolic laminated etc., as required, single pole, 240 volts, grade 120W watts, 2 Module heavy duty and ISI marked complete all as specified and directed. |
| 73 | S&F in replacement sheet metal enclosure MCB DB double door , Triple pole and neutral, 440 volts, 4 way with 200 Amp, 10 KA breaking capacity rated copper bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified and directed. |
| 74 | Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 8 way, SPN, double door type, 240 Volt with 200 amps rated busbar complete all as directed(Note : MCBs will be Measured separately) Including taking down old unsv |
| 75 | S&F in replacement MCB Triple Pole and Neutral upto 63 Amps,415 V ,10KA breaking capacity complete all as specified and directed. |
| 76 | S&F in replacement MCB Single Pole and Neutral 240Volt, upto 40 Amps, 'C' series,10KA breaking capacity complete all as specified and directed. |
| 77 | Supply & fix RCBOs For earth Leakage , overload & short Circuit Protection Double Pole 30 mA complete all as specified and directed |
| 78 | S&F in replacement MCB Single Pole 240Volt, upto 40Amps,10KA breaking capacitycomplete all as specified and directed. |
| 79 | Earthing complete for various equipments with galvanised steel earth plate electrode 600 x 600 x 6mm thick directly burried in the ground (earth pit not less than 2.25 metre deep below ground level) with top edge of earth plate not less than 1.5 m below the ground level, connected to G.I wire 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, GI pipe 20mm bore light grade for protection of earthing strip, PCC chamber 1:4:8, type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber plastered with 12mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge ( 0.63) 8 mesh per linear inch, 50mm thick cover of RCC 1:2:4, type B-1, using 20mm graded stone aggregate, reinforced with 8mm TMT bar at 100mm center to center both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR Part-I and as specified including excavation and earth work and connecting the earthing to an earthing test point as specified and testing on completion all as specified & directed by Engineer-in-Charge..Note:- Unit rate quoted is inclusive of earth lead and protection pipe upto 7.5 metre from earth plate. |
| 80 | Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured 3.5 core X 50 SQMM with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the under mentioned type and sizes including taking down the old unsv complete all as specified and directed. |
| 81 | Supplying and laying DWC pipe OD 50 mm , ID 40/38 mm complete all as specified and directed. |
| 82 | Excavation in trenches not exceeding 1.5m deep & not exceeding 1.5m wide or area not exceeding 10 Sqm on plan, in any type of soil and getting out for foundation, trenches or laying of electric cable or pipes complete all as specified and as directed. |
| 83 | Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed. |
| 84 | Removal of excavated materials (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. |
| 85 | M&L dry river washed and screened dry sand for filling in trenches below and around the cable for cushioning including punning down as specified inrelevant clause of SSR Part I complete all as specified and directed. Note:- Punned thickness shall only be measured and paid. |
| 86 | Supplying and laying unreinforced precast concrete cable cover, class LV Type 2 flat, size 300mm x 180mm x 40mm complete all as specified and directed. |
| 87 | Schedule of credit of Amount Rs. 2,42,419.00 to be deducted during AOC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender