Tender For special Repair Of Saar Section Scrap Room (Bldg No P-52) At Sqae (A) & Lpr, Khamaria And special Repair Of Small Arms And Ammunition Magazine (Bldg No. P-58) At Sqae (A) & Lpr, Khamaria Under Ge (P) No.1 Jabalpur
Tender Value
39.17 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
11 days left
EMD
78400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Saar Section Scrap Room (Bldg No P-52) At Sqae (A) & Lpr, Khamaria And special Repair Of Small Arms And Ammunition Magazine (Bldg No. P-58) At Sqae (A) & Lpr, Khamaria Under Ge (P) No.1 Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | M&L for Cement concrete type D2 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed |
| 3 | M&L for Cement concrete 50 mm thick type B-1, 1:2:4 (20mm graded aggregate), for floor finishes complete all as specified and directed |
| 4 | M&L for Granolithic concrete 1:1:2 floor topping 30mm thick; laid over cement concrete subfloors etc. and finished to an even and fair surface, complete all as specified and directed |
| 5 | M&L for Wearproof topping as specified (incorporating an approved metallic floor hardner), thickness 20mm, laid on concrete floors and pavings, and finished even and smooth (except metallic hardner), including glass dividing strips, complete all as specified and directed. |
| 6 | Supply only Metallic floor hardener, complete all as specified and directed |
| 7 | Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 8 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over screed bed or bedding layer of cement mortar (1:6) 15 mm thick for laying floor finishes, complete all as specified and directed. |
| 9 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, with rendering of cement mortar (1:4) 10 mm thick for laying floor finishes, roofs complete all as specified and directed. |
| 10 | M&L for Chequered cement concrete tiles with grey pigment cement and pigments 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, over and including screed bed or bedding layer of cement mortar (1:6) 15 mm thick for laying floor finishes, roofs complete all as specified and directed. |
| 11 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, drain etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 12 | Demolition of RCC of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 13 | M&L for RCC M-25 ( Design mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 14 | Use and waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or tobatter complete all as specified and directed. |
| 15 | M&L for RCC M-25 using 20mm graded aggregate for Walls, retaining walls, drain, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 16 | Use and waste for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, complete all as specified and directed. |
| 17 | M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 18 | S&F TMT steel bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed. |
| 19 | Complete removal of of PCC padding over roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including plaster with existing water proofing treatment in any position cleaning, wire brushing, watering & removal of shrubs/weeds/debris outside complete all as specified and directed. |
| 20 | M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in concrete padding laid to required slope incl finishing the concrete surface fair and even without using extra cement complete all as specified and directed. |
| 21 | M&L for 10 mm thick screed bed or bedding layer of mortar in cement mortar (1:4) for laying roof finish as padding finished with WPC 3% by weight of total cement, complete all as specified and directed. |
| 22 | M & L for Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/sqm on top of dry surfaces of finished cement mortar plaster complete all as specified and directed. |
| 23 | M&L for APP polymeric membrane min weighting 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric(wt not less than 150 gms/sqm laid on primed surfaces by torch application on method complete all as specified and directed. |
| 24 | Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI(solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and directed. |
| 25 | M&L for 75 mm cement concrete Type C2 1:3:6 (40 mm graded aggregate) in plinth protection and even and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 26 | M&L for Applying two coats of bituminous base aluminium paint on old Surfaces including preparation complete all as specified and directed. |
| 27 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, complete all as specified and directed. |
| 28 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of Cement plaster 1:6, rendering is to be finished even or smooth (without using extra lime or cement complete all as specified and directed. |
| 29 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces of Cement plaster 1:3, rendering is to be finished even or smooth (without using extra lime or cement complete all as specified and directed. |
| 30 | M&L for Providing and applying plaster of paris putty of appropriate thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 31 | Material & Labour for preparation of new/old external surfaces of wall/ceiling and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. |
| 32 | M&L for prepareation of new/old internal surfaces of wall and applying oil emulsion with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work.,over a coat of primer incl removing of existing treatment etc complete all as specified and directed. |
| 33 | M&L for synthetic enamel paint one coat after prepararion of old/new painted surfaces of steel/iron of any description, over 10cm in width or girth,not otherwise described, complete all as specified and directed. |
| 34 | M&L for Brick work with subclass ‘B’ bricks, old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 35 | M&L for providing cement concrete B0 1:2:4 (12.5 mm graded aggregate) in holdfast complete all as specified and directed. |
| 36 | Taking down Chowkhat or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames), complete all as specified and directed. |
| 37 | Taking down and refixing Chowkhat or frames exc. 1.5 sq. m but not exc. 4 sq. m each with shutters (without taking off shutters from the frames), complete all as specified and directed. |
| 38 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 39 | S&F powder coated (min thickness of powder coating 50 micorn) Aluminium door, window, ventilator frame, Louvers with one or more rebates and shutter incl jointing cleat for fixing etc. including making good to the disturbed surfaces and matching existing treatment (cement base paint/distemper/white wash/plastic paint) etc complete all as specified and directed. |
| 40 | S&F for Fibre glass reinforced translucent plain sheeting thickness 5 mm with two plain side lap fixed with coach screw and washer in roof, wall, windows etc complete all as specified and directed. |
| 41 | Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 42 | M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over CM 1:4, 10mm thickon fair faces of brick work or concrete surfaces, complete all as specified and directed. |
| 43 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick for laying floor finishes, complete all as specified and directed. |
| 44 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 45 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 46 | S&F 100mm Butt hinges, extruded aluminium alloy with galvanisedmild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 47 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 48 | S&F for 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 49 | S&F aluminium handles, cast type, anodised 150mm size, complete all as specified and directed. |
| 50 | S&F in repair 15 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors incl cutting chasing and making good complete all as specified and directed. |
| 51 | S&F in repair 20 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 52 | S&F110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls complete all as specified and directed. |
| 53 | S&F 110mm bore PVC (SWR) bends any radius. complete all as specified and directed. |
| 54 | S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal any radius. complete all as specified and directed. |
| 55 | S&F 110mm bore PVC (SWR) junction double, (double T) equal or unequal any radius. complete all as specified and directed. |
| 56 | S&F 110mm bore PVC (SWR) cowl any radius. complete all as specified and directed. |
| 57 | S&F PVC (SWR) pipe inner dia 75mm single socketed in any length with rubber ring joint laid on wall/ceiling or laying in floors complete all as specified and directed. |
| 58 | S&F for 75 mm dia PVC (SWR ) bends and radius complete all as specified and directed. |
| 59 | S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe with access door complete all as specified and directed. |
| 60 | S & F in repair PVC water tank Rotational moulded polyethylene water storage tanks 500 litres (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 61 | S&F in repair 10 litre capacity PVC flushing tank,, syphonic action type, Flushing cistern, low level, white, with inlet, ball valve,pvc flush pipe, float and handle incl brackets and waste pipe complete all as specified and directed. |
| 62 | S&F in repairs Vitreous China wash down water closet pan (squatt pattern), white, connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromoum plated complete all as specified and directed. |
| 63 | S&F in repair Health faucet (ABSBody) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 64 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates (Grade Fe 410 -W (Gde- E- 250) quality- A), complete all as specified and directed. |
| 65 | S&F in repair 20 mm bore gun matel glove or gate valve valve cast copper alloy with handle screwed both ends for GI out let/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed. |
| 66 | S&F Wash hand basin flat back 550x400mm vitreous china (white) including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified and directed. |
| 67 | S&L for Vitreous China Urinal, Half stall type, white including flush coupling and waste pipe including connection complete all as specified and directed. |
| 68 | S&F for Urinal spreader of CP any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) with PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 69 | S&F for in repair Stop valves, angle cock, 15mm, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 70 | M&L for in repairs PVC Nahani trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all as specified and directed. |
| 71 | S&F in repair 15mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, including all fittings complete all as specified and directed. |
| 72 | S&F in repair 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, including all fittings complete all as specified and directed. |
| 73 | S&F for PVC connections 15 mm size with PTMT nuts of length 600mm fixed complete all as specified and directed. |
| 74 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and directed. |
| 75 | S&F in repairs E-boards, ceiling, 4 mm thick with J framed work with main Tee of size 24 x 28.5 mm made out of PGI sheet .3 mm thick double at web and single at flange, flange coverd with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x .45 mm powder coated for ceiling , ceiling boards 60cm x 60cm x 4mm thick , suspended with GI wire 2mm dia and 2m average length with adjustable hanging device complete including plugging in brick/stone walls with steel rawl plug @ 600 mm C/C Ceiling board shall be pressed to the ceiling tee with staple clips at all four sides and incl making good of all disturbed/daimage surface of walls and applying two coat of oil bound distemper complete all as specified and directed. |
| 76 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails, window grills and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410- W(Gde- E-250) quality- B complete all as specified and directed. |
| 77 | M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 78 | S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 79 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out, complete all as specified and directed. |
| 80 | Demolition of cement concrete reinforced in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 81 | M&L for RCC M-25 ( Design mix) for chajjas complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 82 | Use and waste of formwork for concrete to chullah hoods, chajjas, troughs and similar items including edges, fair finished surfaces complete all as specified and directed. |
| 83 | Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 84 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out, complete all as specified and directed. |
| 85 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed. |
| 86 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed. |
| 87 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces of Cement plaster 1:6, rendering is to be finished even or smooth (without using extra lime or cement complete all as specified and directed. |
| 88 | S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 89 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed. |
| 90 | Butt hinges of size 100mm,S S, cold rolled mild steel, and fixed, complete all as specified and directed. |
| 91 | S&F for 125 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 92 | M&L for newly plastered surface (interior), three coat of fire resisting paint of any description wood, steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth, complete all as specified and directed. |
| 93 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc with or without conduit , casing caping complete all as specified and directed. |
| 94 | M&L for Point wiring (concealed) for light point in and including rigid non metalic PVC heavey duty conduit , 19/20mm dia suitable size including cutting chesses for conduits sinking for boxes for concealed conduit wiring with 1.5 sqmm FRLS PVC insulated , unsheathed multi stranded copper copper conductor cable single core 1100 volt grade including metal sheet enclosure rectangular boxes of suitable size and and white cover plate suitable for fixing modular switches ,sockets, and fan regulator etc including PVC insulated unsheathed multi stranded copper conductor of 1.5 sqmm as earth wire connected to common earth dolly as per IS specification and as specified in SSR part- 1 complete for one light point/fan point/bell point controlled by one modular switch 1 way 6 Amp,one module complete all as specified and directed. |
| 95 | ~ditto~ all as per item No 94 here in before but with one 3 pin 5 Amp socket outlet on the same board complete all as specified and directed. |
| 96 | ~ditto~ all as per item No 94 here in before but with one 3 pin 5 Amp socket outlet on independent board complete all as specified and directed. |
| 97 | ~ditto~ all as per item No. 94 here-in-before but with 2.5 Sqmm copper conductor cable for one 3 pin, 15 Amps socket outlet on independent board complete all as specified and directed. |
| 98 | Supply & fixing in repair sub main wiring with 4 single core, multi stranded, PVC insulated, 1100 Volt grade, FRLS, cable with copper conductor of size 4 Sq mm in and including/drawing through through rigid non metalic PVC conduit medium grade, ISI marked, 25 mm dia for sub main wiring including continuous PVC insulated copper conductor single core earth continuity conductor of size 4 Sqmm connected common earth. complete all as specified and directed.(Note :- 4x 4 Sq mm conductor cable, 1 x 4Sq mm conductor earth continuity cable & PVC conduit shall be measured as one unit length) |
| 99 | S&F Switch Modular 6A one way, 1 module complete all as specified and directed. |
| 100 | S&F Switch Modular 16A one way, 1 module complete all as specified and directed. |
| 101 | S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 102 | S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 103 | S&F in replacement of frame plate for modular switch 3 module including screws and washers etc model/make as per existing in site complete all as specified and directed. |
| 104 | S&F in replacement of frame plate for modular switch 4 module including screws and washers etc model/make as per existing in site complete all as specified and directed. |
| 105 | S&F in replacement MS Housing box 3 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and directed. |
| 106 | S&F in replacement MS Housing box 4/5 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and directed. |
| 107 | M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed. |
| 108 | S&F LED lights fitting 20 watt, 220V, AC decorative box type Tube light with driver, holder including LED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 109 | S&F in repair LED Bldg Security light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant with IP 65/66 protection complete including GI bracket of suitable size bent to shape and fixed on wall with metal fastners 2 Nos incl drilling of holes as reqd and connecting up with flexible copper cable from ceiling rose to the light fitting and complete all as specified and directed. Make : Havells |
| 110 | M&L for MCB Distribution board single door type SPN 8 way, sheet steel, powder painted for fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and directed. |
| 111 | M&L for MCB SP 5-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and directed. |
| 112 | Supply and fixing 415 Volt,10KA B curve MCB TPN/FP 40 to 100 Amp complete with connection, testing and commissioning. complete all as specified and directed. |
| 113 | Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth strip 32x 6 mm by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing. |
| 114 | Taking down existing light fittings any type/any capacity cleaning completely to remove the dust and other particulars including checking of all connection and re-fixing the same in original position including provision of single core flexible wire upto ceiling rose complete all as specified and directed. |
| 115 | M&L for Point wiring for explosive atmosphere with 1100 volts grade, PVC insulated single core FRLS cable with stranded copper conductor of size 2.5 sqmm drawn through and including ERW rigid enamelled steel conduit of size 18/19 mm dia with bends, elbows, couplings etc. duly approved by CMRI Dhanbad and as per IS , flexed with PVC FRLS, insulated unsheathed multi stranded copper conductor cable of 2.5 sqmm as an earth wire connected to common earth and earth dolly as per IS specification for one light point controlled by one switch complete all as specified and directed. |
| 116 | M&L for in repairs for sub wiring for explosive atmosphere with two single core 2.5 Sqmm multi stranded copper conductor, FRLS, PVC insulated, unsheathed cable, ISI marked, drawn into ERW steel conduit including 2.5 Sqmm FRLS, PVC insulated and unsheathed stranded copper conductor as earth wire in surface/recess including taking down unserviceable sub-main wiring of any description and making good to the disturbed surfaces to match the existing surfaces complete all as specified and directed.Note : Two runs of 2.5 Sqmm copper conductor cable, one run of 2.5 sqmm copper conductor and one run of steel conduit will be measured as one unit. |
| 117 | Supply and fixing LED light fitting 2x16/18/20 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size flexible metalic hose conduit from juction box to tube light fittings not less than 500mm long of size complete all as specified and directed. |
| 118 | Supply and fixing flame proof cum waterproof LED light buk head fitting of 40W/45 W. IP66 protection of cast Aluminum alloy meterail and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size. complete all as specified and directed. |
| 119 | Supply and Fix in repair flame proof /weather proof roatary ON/OFF switch, with terminal box capacity 16 amp. Shyam switchgear cat No. SSPL/2C/1010 complete all as specified and directed. |
| 120 | Supply and fix flame proof /weather proof SS metallic flexible hose pipe from junction box to light fittings/ power socket not less than 300 mm long of size 20 mm duly approved by CMRI Dhanbad. Shyam switchgear Cat No.SSPL/FH/145 complete all as specified and directed. |
| 121 | Supply and Fix in repair flame proof /weather proof junction box 4way (100 mm Dia). Shyam switchgear cat No. SSPL/JB/105 complete all as specified and directed. |
| 122 | Supply and fix enclosed , Flame proof weather proof distribution board SPN 6 Way (Enclosure Size: 250X250mm) FLP Lighting Distribution Panel Incoming: - MCB, 2P, 32Amp — 1 no, Outgoing: - MCB, 1P, Amp- 4 nos (MCB- L&T/ Schneider Make) ,With complete internal Bus bar & wiring up to terminals. complete all as specified and directed. |
| 123 | Schedule of credit of Amount Rs. 34,096.00 to be deducted during AOC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender