Tender For Repair & Maintenance Of B/R Nature Of Works In E/M Installation And Camouflage Painting To Certain Otm Accn In Southern Part Of Runway Under Age B/R-Ii Of Ge (Af) Lohegaon
Tender Value
38 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
15 days left
EMD
76000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Maintenance Of B/R Nature Of Works In E/M Installation And Camouflage Painting To Certain Otm Accn In Southern Part Of Runway Under Age B/R-Ii Of Ge (Af) Lohegaon
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital pattern, manglore pattern roof tiles or similar pattern roof coverings |
| 2 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 5 | S&F Fe 290 (Gde E-165) Rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates |
| 6 | Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome Complete all as specified and directed. |
| 7 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion & making good disturbed ground embedded in Concrete, brick work, masonry, etc. Complete all as specified and directed. |
| 8 | M&L providing cement concrete type C1 1:3:6 (using 20mm graded agg) as in bed blocks, bed plates etc all as specified and directed. |
| 9 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded aggregate ) in foundations, filling and mass concrete for post holes complete all as specified and directed. |
| 10 | S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165. Complete all as specified and directed. |
| 11 | S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) Complete all as specified and directed. |
| 12 | Supply only Chain link MS galvanisd fencing, any size or type fixed to post struts or steel members complete all as directed. |
| 13 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire all as specified and directed. |
| 14 | S&F for mild steel screw bolts (machine cut) with hexagonal or square heads at one end and srewed the other or screwed both ends each screwed end to be fitted wth washers and one hexagonal or square not exceeding 5 cm long and diameter of neck 5 to 10mm complete. |
| 15 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 16 | Providing and laying 60mm thick factory made chamfered edge cement concrete rubber moulded paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand Complete all as specified and directed. |
| 17 | M&L cement concrete type B1 1:2:4 (20mm graded aggregate) as in haunching, benching, coping kneelers, apex stones, bed plates, kerbs and filling in pressed steel frames as directed. |
| 18 | M&L 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded agg) as in sub-base of floor Complete all as specified and directed. |
| 19 | M&L 20 mm thick cement screed bed or bedding laying in CM 1:4 for laying of floor tiles Complete all as specified and directed. |
| 20 | M&L Machine cut kota stone slab flooring 15-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed. |
| 21 | M&L Machine cut kota stone slab 15-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl over laid of 10mm thick redering in CM 1;3 as in backing coat of kota stone incl Taking down cement or cement lime plaster any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc Complete all as specified and directed. |
| 22 | Taking down cement or cement lime plaster any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc. Complete all as specified and directed. |
| 23 | M&L 15mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete wall surface finished even and smooth. |
| 24 | M&L 12mm thick ready mix cement plaster in CM 1:3 on wall, chajjas surface (top, bottom and sides), roof facia, hanging facia portion etc upto any height. |
| 25 | M&L 5mm thick cement plaster in CM 1:3 on fair faces of brick or concrete ceiling surface. |
| 26 | M&L two coats of acrylic Distemper, white or tinted on new wall surface including over a coat of 1mm thick wall care putty and including necessary scaffolding, trestles, ladders, cradles etc for necessary for execution of work and protective measures, work in patches etc spreading and removing to doors, windows floors, fitings etc to protect them from splashes, washing floors cleaning glass, joinery, electric fittings, wiring etc of drops and splashes and leaving premises, clean and tidy. |
| 27 | M & L for preparation of new plastered or unplastered surfaces of ceilings including cornices, etc and applying three finishing coat of white wash necessary scaffolding, trestles, ladders, cradles etc upto 10m height for necessary for execution of work and protective measures and removing of nails, making good holes, cracks etc, work in patches etc spreading and removing to doors, windows floors, fitings etc to protect them from splashes, washing floors cleaning glass, joinery, electric fittings, wiring etc of drops and splashes and leaving premises, clean and tidy. Complete all as specified and directed. |
| 28 | M&L for preparing new suface plastered or unplastered applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm including necessary scaffolding, trestles, ladders, cradles etc upto 12m height for necessary for execution of work and protective measures, removing of nails, making good holes, cracks etc, work in patches etc, spreading and removing coveings to doors, windows, floors, fitings etc to protect them from splashes, washing floors cleaning glass, joinery, electric fittings, wiring etc of drops and splashes and leaving premises, clean and tidy. Complete all as specified and directed. |
| 29 | M&L for preparing old suface plastered or unplastered applying Two coats of 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including necessary scaffolding, trestles, ladders, cradles etc upto 12m height for necessary for execution of work and protective measures, removing of nails, making good holes, cracks etc, work in patches etc, spreading and removing coveings to doors, windows, floors, fitings etc to protect them from splashes, washing floors cleaning glass, joinery, electric fittings, wiring etc of drops and splashes and leaving premises, clean and tidy. Complete all as specified and directed. |
| 30 | M&L two coats of acrylic Distemper, white or tinted on old wall surface including over a coat of 1mm thick wall care putty and including necessary scaffolding, trestles, ladders, cradles etc for necessary execution of work and protective measures and removing of nails, making good holes, cracks etc, work in patches etc spreading and removing to doors, windows floors, fitings etc to protect them from splashes, washing floors cleaning glass, joinery, electric fittings, wiring etc of drops and splashes and leaving premises, clean and tidy. |
| 31 | M & L for preparation of old plastered or unplastered surfaces of ceilings including cornices, etc and applying one coat of white wash including necessary scaffolding, trestles, ladders, cradles etc for necessary execution of work and protective measures, removing of nails, making good holes, cracks etc, work in patches etc, spreading and removing coveings to doors, windows, floors, fitings etc to protect them from splashes, washing floors cleaning glass, joinery, electric fittings, wiring etc of drops and splashes and leaving premises, clean and tidy. Complete all as specified and directed. |
| 32 | M & L for preparation of old painted steel and iron surfaces of any description exceeding 10 cm in width or girth and applying one finishing coat of synthetic enamel paint on steel surfaces including removing of nails, making good holes, cracks etc, work in patches etc spreading and removing to doors, windows floors, fitings etc to protect them from splashes, washing floors cleaning glass, joinery, electric fittings, wiring etc of drops and splashes and leaving premises, clean and tidy. complete all as specified and directed. |
| 33 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described, exceeding 10cm in width or girth and applying one finishing coat of synthetic enamel paint on wooden surfaces including removing of nails, making good holes, cracks etc, work in patches. etc spreading and removing to doors, windows floors, fitings etc to protect them from splashes, washing floors cleaning glass, joinery, electric fittings, wiring etc of drops and splashes and leaving premises, clean and tidy. complete all as specified and directed. |
| 34 | M & L for preparation of old painted steel and iron surfaces of any description exceeding 10 cm in width or girth and applying one finishing coat of aluminium paint on steel surfaces including removing of nails, making good holes, cracks etc, work in patches etc spreading and removing to doors, windows floors, fitings etc to protect them from splashes, washing floors cleaning glass, joinery, electric fittings, wiring etc of drops and splashes and leaving premises, clean and tidy. complete all as specified and directed. |
| 35 | M&L Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM (1:3) on fair face of brick or concrete surface incl dismantling of tiles incl taking backing coat. |
| 36 | M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM(1:4) incl dismantling of tiles including taking backing coat. |
| 37 | S & F Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position incl dismantling water tanks of any type of capacity exc 250 but n.exc 500 liters and incl S & F of Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe complete all as specified and directed. |
| 38 | Dismantling of rolling shutter of any size. |
| 39 | S&F 1.25mm thick steel rolling shutters, with/without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position gear operated type with bevel gear box and crank handle including necessary scaffolding, safety measure as indicated, complete all as specified and directed. |
| 40 | S & F in repair 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. |
| 41 | S&F in repairs 15 mm Bib tap cast copper alloy fancy type chromium plated long body screwed down, screwed for iron pipe or for brass ferrule |
| 42 | S&F in repairs 15mm Pillars taps fancy type cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule |
| 43 | S&F in repairs 15mm dia angle valve/stop valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule |
| 44 | S&F in repairs PVC Waste pipe as in WHB/Sink/urinal Size 32/40 mm fixed to coupling all as specified and directed. |
| 45 | S & F in repairs SS Grating doom 100mm dia including bedding and pointing in cement mortar 1:3 all as specified and directed. |
| 46 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 47 | S & F GI pipe medium grade 15 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors incl taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 48 | S & F GI pipe medium grade 20 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors incl taking up or down steel tubing 20mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 49 | S&F in repairs Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) |
| 50 | Taking down chowkhats or frames (without taking off shutter shutters from the frames) exc 1.5 sqm but nexc 4.00 sqm each. |
| 51 | M&L Pressed steel frames 105X60MM for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 52 | S&F 35mm thick flush shutter, solid core construction, with block board core and plywood face panels, commerical type on both side with second class hardwood lipping all round complete all as specified and directed. |
| 53 | S&F 150mm Aluminium anodised, barrel tower bolts of extruded section |
| 54 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy |
| 55 | S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised. |
| 56 | S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. |
| 57 | M&L two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer |
| 58 | Taking down aluminium partitions, door, window and ventilator etc complete all as specified and directed. |
| 59 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 60 | M&L 18/19mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face. |
| 61 | S&F 4.8mm thick Sheet glass, ordinary quality and glazing with fixing in aluminium door/partion with aluminium bedding in square exc 0.5 sq. m in each pane |
| 62 | S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones including necessary scaffolding, trestles, ladders, cradles etc upto 12m height for necessary for execution of work and protective measures |
| 63 | S&F Sheet glass 4.0mm thick, ordinary quality & glazing with aluminium bedding in square n exc 0.5 sq.m in each pane. including necessary scaffolding, trestles, ladders, cradles etc upto 12m height for necessary for execution of work and protective measures |
| 64 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm |
| 65 | Demolition of Brick/precast concrete block/Stone/boulder masonary walling built in cement mortar all as specified and directed. |
| 66 | M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6. |
| 67 | Taking down old existing water proofing treament from the top of RCC/arch slab, including demolition of existing PCC padding, plaster, brick bat coba (upto any thickness) and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified and directed. |
| 68 | M&L cement concrete type B1-1 1:2:4 (using 20mm graded aggregate) as in roof padding, roof/chajjas kerbs or mud stops, rounded or chamfered on edges, haunching etc. |
| 69 | M & L for rendering 10mm thick plaster in cement mortar (1:4) on concrete roof surfaces mixed with WPC as per manufacturer’s instructions.NOTE: WPC shall be measured and paid separately |
| 70 | Supply only liquid water proofing compound. |
| 71 | Providing & applying Proofex ORG-1.2mm thick TPO/FPA (Thermoplastic Polyolefin Flexible Polypropylene Alloy) reinforced membrane produced by extrusion of granules resulting from the incorporation of ethylene propylene rubber into a polypropylene matrix together with other additives as appropriate to the type of membrane. Surface Preparation: The terrace surface should be thoroughly abraded to remove all laitance. Any trace of loose plaster, oil grease and any other loose material shall be removed by appropriate method. The entire surface shall then be cleaned thoroughly and existing vegetation to be removed. Identify and remove loose, pointed portions using light hammering in minimum 10 mm thickness. If any pointed objects they are levelled using mechanical cutter/grinder. Clean the surface to remove loose dust, dirt etc. Any uneven or damaged surface must be repaired using polymer modified mortar Renderoc SP40. Apply a 200-gsm geo textile/polyester non-woven cloth on the top of the prepared surface, lay Proofex ORG membrane, and anchor at 200 mm c/c and joints overlapped and waterproof with hot air welded seams. Membrane Laps are overlapped to achieve a minimum weld of 50mm. Laps shall be hot air welded by hand applied or by means of automatic machines. Corner detailing and rainwater outlets shall be addressed using Fosroc Proofex ORG pieces. Proofex ORG membrane to be taken upto 200 mm height of the parapet walls using Aluminium termination strip and seal the same using Nitoseal PU50-Single part PU sealant. From slab level vertical termination till complete height of Parapet with Proofex ORG the membrane must be fixed by Adhesive and must be bonded with substrate vertically.Proofex ORG membrane shall possess Tensile strength ASTM D412: > 9 N/mm2, Elongation (Peak) ASTM D412 & EN 12311-2: 1000%, Puncture Resistance (EN12691-1): Pass Test > 1000 mm, Tear Resistance –EN 12310-1: L-470 N, T-530 N, Root Resistance: Pass Test-No PenetrationHail Resistance(EN 13583):26 m/s, Resistance to Micro-Organism(EN 846): |
| 72 | S&F in repair 1.25mm thick Mild steel, plain, black sheet in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts, cover, urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required including MS handle and locking device. |
| 73 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 74 | M & L for rendering 15 mm thick in CM 1:4 on other than fair faces of brick Work or concrete surface incl taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. Complete all as specified and as directed |
| 75 | M&L preparation of new plaster surface finishing with Acrylic Smooth exterior camfoulage paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 76 | M&L complete removal of existing treatment on old wall of brick or concrete surface finishing with Acrylic Smooth exterior camfoulage paint of required shade : old work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender