Tender For Repair To Plastering, Brickwork, Flooring, Plumbing, Sanitary Fittings, Joinery, Att, Wpt, Roof Sheet, Ceiling, Periodical Services And Certain Misc Repair Etc To Otm Accn At Od Kolkata Under Ge (C) Kolkata
Tender Value
30 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
19 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Plastering, Brickwork, Flooring, Plumbing, Sanitary Fittings, Joinery, Att, Wpt, Roof Sheet, Ceiling, Periodical Services And Certain Misc Repair Etc To Otm Accn At Od Kolkata Under Ge (C) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE ( C ) KOLKATA Name of Work:REPAIR TO PLASTERING, BRICKWORK, FLOORING, PLUMBING, SANITARY FITTINGS, JOINERY, ATT, WPT, ROOF SHEET, CEILING, PERIODICAL SERVICES AND CERTAIN MISC REPAIR ETC TO OTM ACCN AT OD KOLKATA UNDER GE (C) KOLKATA Contract No: GE (C )/KOL/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # ItemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed |
| 3 | Dismantling plain or corrugated steel sheeeting any gauge, thickness, including nainital or similar roof covering/sunshade, complete all as specified and directed |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 5 | Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings heads shoes bends swan necks etc. including cleaning and refixing or removal to store (Measured overall as fixed along the Centre Line over the Fittings and Accessories), complete all as specified and as directed. |
| 6 | Dismentalling floors hearth or wall tilling including cement mortor bedding (but not backing) removing serviceble tiles to store and rubbish off the premises complete all as specified and directed |
| 7 | Dismantling of stone slabs and tiles laid,bedded and pointed in any mortar of any description or thickness in floors, aprons etc all as directed by Engineer-in-charge. |
| 8 | Demolition of cement concrete (Un-reinforced) in ground floor and paving nexc 15cm thick above or below GL complete all as specified and directed |
| 9 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, crumple joints, ridge cover, etc fixed with self tapping screws etc; complete all as specified and as directed. |
| 10 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screw complete all as specified and directed. |
| 11 | S&F mild steel rolled section in Roof trusses (framed) , trussed , purlines, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or Flat section) including distance pieces , cleats etc Fe-410W (Gde E-250 Quality `A') complete all as specifed and directed. |
| 12 | M&L Non Asbestos fiber cement Corrugated /Semi-Corrugated Sheets 6.0mm thick provides high impact resistance, sound and thermal insulation as in Roof Covering fixed with L–type or J–type Cranked Hook Bolts with Washers, etc. and fixed, complete all as specified and as directed. |
| 13 | Fixing only old serviceable Asbestos Cement Corrugated,Semi-Corrugated Sheets 6.0mm thickheets obtained from dismantling item as in Roof Covering including supply and fixed with new L–type or J–type Cranked Hook Bolts with Washers, etc. and fixed, complete all as specified and as directed. |
| 14 | S&F 0.63mm thick galvanized, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washer in roof, wall etc with grade of zinc coating 275 complete all as specified and directed |
| 15 | S&F 0.71mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed)., complete all as specified and as directed. |
| 16 | S&F mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed |
| 17 | Taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc. complete all as specified and directed |
| 18 | Demolition of brick work or stone masonary built in cement mortor including all quoins & jambs etc. complete all as specified and directed |
| 19 | Dismantling of Wall and Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab /Blankets, any thickness including Cover Fillets, complete all as specified and as directed. |
| 20 | Taking down chowkhats or frames with shutters (without taking off shutter from frames) of any sizes nexc 1.5 Sqm complete all as specified and directed. |
| 21 | All as item No. 19.00 mentioned here-in-before but exc 1.5 Sqm and nexc 4.0 Sqm each. |
| 22 | Taking up or down steel tubing 20mm dia and connection complete all as specified and directed |
| 23 | All as per item No. 21.00 mentioned here-in-before but 25mm dia bore. |
| 24 | M&L plain cement concrete type B-0 (Using 12.50mm graded stone aggregate) as in padding, benching & filleting all as specified and directed. |
| 25 | M&L for taking down existing membrance and Preparation of plastered surfaces of roof and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt laying over a coat of bituminous primer @ 0.40 Ltr / Sqm. The membrane shall be laid using bitumen torch and sealing all joints etc all as specified and directed. |
| 26 | S&F triple layer PVC water storage tank cylindrical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25mm outer diameter for CPVC pipe & making connection for inlet and outlet including dismantle of old water tank and removing from site complete all as specified & directed. |
| 27 | M&L Brick work with fly ash bricks designation 75 (kgf/cm2) straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 28 | M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed. |
| 29 | M&L rendering 10mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & fair without using extra cement complete all as specified and directed |
| 30 | M&L rendering 5mm thick in CM (1:3) as in ceiling surfaces even & smoth without using extra cement complete all as specified and directed |
| 31 | M&L 75mm thick PCC (1:4:8) type B-1 (using 20mm graded stone aggregate) as sub base floor surface even and rough to receive the topping layer complete all as specified and directed |
| 32 | M&L 25mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as base, floor finish surface even and rough to receive the topping layer complete all as specified and directed |
| 33 | S&F Machine cut kota stone slab flooring 18-20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite finish polishing complete over and including 20mm thick 1:6 cement mortar screed bed complete all as specified and as directed. |
| 34 | All item as per item No 33.00 here in before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed |
| 35 | Supply and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade bearing specification as per IS code 15658:2006 with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, complete all as spcified and directed. |
| 36 | All as per item No 35.00 above but Except old paver block. Note : Paver block obtained from dismantling shalll be reused. |
| 37 | M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished the surfaces even and fair using water proofing compound as per manufacturer instruction complete all as specified and directedNote : WPC shall be measured and paid separately |
| 38 | Supply only liquid water proofing compound as specified |
| 39 | S&F for 20mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 40 | S&F for 25mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 41 | M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection laid in panels, finish the top surfaces even and smooth without using extra cement complete all as specified and directedNote:- Construction joints will be provided at interval of 2.5m length and filled with bitumen 80/20 mix with sand in ratio of 1:3 and cost of the same shall be deemed included in quoted rate |
| 42 | M&L cement concrete tiles 30cmx30cmx25mm thick, machine pressed including 15mm thick screed bed in CM (1:6) set jointed and pointed in neat cement slurry with grey cement and no pigment in floors, and cut and polished complete all as specified and directed |
| 43 | M&L non skid ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 44 | All as item No. 43.00 here in before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed. |
| 45 | M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 46 | All as item No. 45.00 here in before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed. |
| 47 | M&L glazed ceramic coloured tiles 450x300x6-7mm in vertical surfaces set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed |
| 48 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed. |
| 49 | S&F for Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 50 | M&L 1.50mm thick power coated aluminium , three track sliding window with three nos shutters made of aluminium section as per drawing no CWE/KOL/TD-33 of section no 1F-1F including necessary jointing cleats, glazing clips, rubber neoprene packing, roller, locking arrangement, handles 2 Nos , anodised aluminium snap beading screws etc.including tinted glass with sheet glass 4.80mm thick , pin head type and glazing in squares exc 0.5 sq. M in each pane and Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm Complete all as specified and as directed.Note Nos :- (i) All window member including fitting & fixture i.e frame, track, shutter frame, etc shall be deem to included quoted rate. Only measure opening size of window. |
| 51 | S&F 4mm thick suspended false ceiling HPSC (high pressure steam curved) pre-primered fibre cement non asbestous building board similar to E-Board Classic placed in a grid of size 605x605mm with aluminium powder coated angle/channel/tee section duly suspended with 4mm dia GI hanger fixed with GI hooks 4mm dia and fastner as required at the site including two coat of oil bound distemper complete all as specified and directed. Note:-The bidder quoted rate included for all straight, Raking or circular cutting, wastage on ceiling board |
| 52 | S&F 25mm bore MS tubing medium grade and fixed at wall for ceiling complete all as specified and directed |
| 53 | M&L in repair for leaking water in brass/CP Wall Mixer, basin mixer, sink mixer of any make/ description/size in any position by replacing the brass spindle & washer, tightening of fittings etc & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed |
| 54 | S&F Mirror Bevelled Edge 600x450mm, Selected quality Glass, mounted on 6.0mm thick AC Building Board or Commercial Ply-wood and fixed to Wooden Plugs with Chro-mium Plated Brass Screws and Cup Washers including Taking down unserviceable Mirror, complete all as specified and as directed. |
| 55 | S&F Double action floor spring hydraulically regulated, made up of minimum 1.25mm thick aluminiun alloy sheet foundation box, main body with stainless steel cover ,governing piovet made of brass ,other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 56 | S&F, in repair, Double action floor spring hydraulically regulated, made up of minimum 1.25mm thick aluminiun alloy sheet foundation box, main body with stainless steel cover ,governing piovet made of brass ,other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 57 | S&F, in repair, 4mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 Sqm each pane complete all as specified and directed |
| 58 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm each pane complete all as specified and directed |
| 59 | S&F, in repair, 4mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 Sqm each pane complete all as specified and directed |
| 60 | S&F 4mm thick frosted glass panes and glazing with oil putty in square nexc 0.5 Sqm each pane complete all as specified. |
| 61 | S&F 100mm Butt hinges, extruded brass, with brass hinge pin, bright polished, complete all as specified and directed |
| 62 | S&F Aluminium anodised, barrel tower bolts of extruded section 200mm long complete all as specified and directed |
| 63 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of 250mm long complete all as specified and directed |
| 64 | S&F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed |
| 65 | S & F in repair for brass chromium plated long body bib cock with Wall Flange for 15 mm bore pipe complete all as specified and directed. |
| 66 | S & F in repair for brass chromium plated two in one tap with Wall Flange screwed for 15 mm bore pipe complete all as specified and directed |
| 67 | S & F in repair for brass chromium plated fancy type Pillar Tap screwed for 15 mm bore pipe complete all as specified and directed |
| 68 | S & F in repair for 15mm bore brass chromium plated Angular Valve with Wall Flange complete all as specified and directed. |
| 69 | S & F in repair for 15mm bore brass chromium plated 2 Way Angular Valve with Wall Flange complete all as specified and directed. |
| 70 | S & F in repair for chromium plated Health faucet with 15mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) |
| 71 | S & F in repair for Plastic water closet seat, in white colour as directed closed pattern with flat/recessed bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and colour as directed. |
| 72 | S&F mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete Fe 410-0 W Gde-E-250 quality-A complete all as specified and directed. |
| 73 | S&F 1.00mm thick Mild steel plain black sheet in wall cladding steel gates and similar work cut to size holes punched including ground headed screws clout nails or reivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up mitred angles etc as required |
| 74 | Supply and fixing in repair Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white (excluding flushing cistern and flush pipe) including plastic water closet seat, white colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed. |
| 75 | S&F in repair vitreous china wash hand basin white of size 550 x 400mm excluding taps but including 32mm PTMT waste coupling (excluding 32mm waste pipe) complete all as specified and directed. |
| 76 | S&F in repair PVC flusing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as directed. |
| 77 | S&F in repair PVC connection 15mm size with PTMT nut of length 600mm complete all as specified and directed |
| 78 | M&L for preparation of old surfaces of wood or wood based materials of any descriptionand applying one coat of synthetic enamel paint over 10 Cm width or girth complete all as specified. |
| 79 | M&L for preparation of new surfaces of Steel and Steel based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of red oxide on steel surfaces complete all as specified. |
| 80 | M&L for preparation of old surfaces of steel or steel based materials of any descriptionand applying one coat of synthetic enamel paint over 10 Cm width or girth complete all as specified. |
| 81 | Material and labour for preparation of existing old wall surface applying one coat of cement based paint on walls surfaces complete all as specified and directed. |
| 82 | M&L preparing old decorated surfaces and applying one coat of oil bound distemper complete all as specified and directed. |
| 83 | M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Oil bound distemper over a coat of primer and applied over and including 1.5mm thickwater proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 84 | M&L Preparing new Surfaces of Ceilng and applying Three Coats of White Wash, complete all as specified and as directed. |
| 85 | M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified & directed. |
| 86 | M&L preparing newly plastered wall surfaces and applying 2 coat of oil bound distemper over a coat of primer including two coat of white cement based putty (approx 1.5mm thick) including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 87 | M&L Preparing of existing old surfaces and applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified & directed. |
| 88 | M&L Prelaminated particle board 9mm thick as in cup board shutter and Shelf, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame works as in repair complete all as specified and as directed. |
| 89 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing powder coated aluminium handle, tower bolt, door stopper as required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed of Engineer-in-charge |
| 90 | S&F Powder coated Aluminium frame for doors with one or more rebates including jointing cleats for fixing etc complete all as specified and as directed. |
| 91 | S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed |
| 92 | M&L for cutting down plants / trees of girth not exc 25 cm & area not exe 01Sqm each from roof tops /sides of external walls of buildings, chajja, wall junctions, junctions of of rain water / soil /waste vent pipes including taking out roots entered in wall/slab surfaces and making good the surfaces including repairing the CI/GI/PVC joints of affected locations by applying TUFALO (herbal medicine ) and making good to suit the adjoining surfaces using PCC type 1:2:4, type B-0 or cement mortar 1:2 complete all as per manufacturer instructions complete all as specified and as directed. |
| 93 | S&F steel window with side hung shutter including box type hinges, with steel handle of MS 25x25mm D type and tow Nos of MS tower bolt 150mm long fixed on shutter over a piece of MS flat as seat and steel peg stay with glazing bars dovetailed or welded incl taking down out old window complete all as specified and directed |
| 94 | S & F repair for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all s specified and directed Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender