Tender For Provision Of Toilet And Bathroom Block For Administrative Staff Of Officers Mess, Covered Shed At Mechanical Transport And Swimming Pool Area At Dhana Mil Stn
Tender Value
9.70 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
15 days left
EMD
19416
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Toilet And Bathroom Block For Administrative Staff Of Officers Mess, Covered Shed At Mechanical Transport And Swimming Pool Area At Dhana Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches not exc 1.5 Mtr wide & not exc 1.5 Mtr depth for foundation etc or for shafts, wells, cesspits, manholes etcand getting out Hard/dence soil complete all as specified and directed. |
| 2 | Returning, filling in trenches including spreading, levelling, watering and well ramming in layer n. exc 25 mm all as specified and directed by Engineer-in-Charge |
| 3 | Removing Excavated soils not exc 50 M and depositing where directed at a level not exc1.5 M above the starting point complete all as specified and directed. |
| 4 | Material & labour for PCC 1:4:8 type D-2 (with using 40mm graded stone aggregate) in foundation filling and mass concrete, complete all as specified and directed. |
| 5 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces complete all as specified and directed. |
| 6 | Formwork to sides of pillars,posts, struts,piers, columns and stanchions for fair finished surface complete all as specified and directed. |
| 7 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surface complete all as specified and directed. |
| 8 | Material & labour for Fair finished flat Form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exce 200 mm thick complete all as specified and directed. |
| 9 | Fair finished flat Form work to Chajjas, water troughs and similar items including edges complete all as specified and directed. |
| 10 | Material & labour RCC M25 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 11 | Material & labour RCC M25 as in Columns, pillars, piers,posts and struts complete all as specified and directed. |
| 12 | Material & labour RCC M25 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed |
| 13 | Reinforced Cement Concrete Type M-25 (using 20 mm graded granite stone aggregate) for slabs suspended on walls, beams and columns, in floors, roofs, landings and in shelves and the like complete all as specified and directed. |
| 14 | Reinforced Cement Concrete Type M-20 (using 20 mm graded granite stone aggregate) in Chajjas and the like complete all as specified and directed. |
| 15 | Mild steel bars 10mm dia TMT bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 16 | Mild steel bars 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 17 | Moorum/Red bajri filling in floors/pavings, laid in layers not exceeding 15 cm thick in each layer, spread, levelled and rammed/ rolled including watering to required level and gradient complete all as specified and directed. |
| 18 | 75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed. |
| 19 | Material & labour for 50 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 20 | Material & labour for Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. |
| 21 | Material & labour for Glazed ceramic colour tiles of size 300 x 450 x7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete as specified and directed. |
| 22 | Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 23 | Material & labour for brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 24 | Material & labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement incl; mixing of water proofing compound complete all as specified and directed. |
| 25 | Material & labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed. |
| 26 | Material & labour for 5mm rendering thick in CM (1:3) on concrete sufaces, finished even & smooth (without using extra cement), complete all as specified and directed. |
| 27 | Supply & fixing for Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. |
| 28 | Material & labour for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, complete all as specified and directed. |
| 29 | Material & labour for 2 nd class hard wood factory made 35mm thick plain framed pannelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 30 | Supply & fixing for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 31 | Supply & fixing for factory solid PVC door frame of size 50mm x 47 mm made out of 5mm wood grain printed PVC sheet reinforced with MS Square tube as per specified & drawing in opening complete all as specified and directed. |
| 32 | Supply & fixing for Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed. |
| 33 | Supply & fixing for MS butt hinges of 100 mm size cold rolled mild steel medium weight, ISI marked complete all as specified and directed. |
| 34 | Supply and fixing 150mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 35 | Supply & fixing 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 36 | Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint , complete, all as specified and as directed. |
| 37 | Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates, grill including jointing cleat for fixing etc. complete all as specified and directed. Note :- Minimum thickness of powder coating 50 micron complete all as specified and directed. |
| 38 | Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 39 | Supply & fixing tinted / coulered floated glass ordinary quality & glazing with wooden/ aluminium bead/oil putty in Square n.exc 0.5 Sqm in Each panel 4.8 mm thick complete all as per specified and directed. Make:- Modiguard/ saintgobin / Hariyana glass complete all as specified and directed. |
| 40 | Supply and fixing 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with all as specified in SSR Part I complete all as specified and directed. |
| 41 | Supply & fixing Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore complete all as specified and directed. |
| 42 | Supply & fixing Vitreous china water closet Orissa pattern long pan size 580x440mm with trap front or back inlet and integral foot rest complete fixed including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe and anti siphon pipe complete all as specified and as directed. |
| 43 | Supply & fixing for vitreous china wash basin white flat back size 550x400mm including pedestal excluding taps , waste but including brackets as, complete all as specified and directed. |
| 44 | Supply & fixing in repairs Vitreous China Half stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed. |
| 45 | Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 46 | Supply & fixing for 600x450mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building board on commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 47 | Supply & fixing PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specfied and directed. |
| 48 | Supply & fixing Bib taps cast copper chromium plated fancy type with crutch or butterfly handle screwed for iron pipe or for brass ferrule of 15 mm bore dia complete all as specified and directed. |
| 49 | Supply & fixing stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) 15 mm bore, screwed down, high pressure, screwed both end for iron pipe or for union complete all as specified and directed. |
| 50 | Supply & fixing pillar cock, chromium plated, fancy type for iron pipe or for brass ferrule of 15mm bore dia complete all as specfied and directed. |
| 51 | Supply & fixing repair in 10 ltr low level PVC value less, syphonic action type flushing cistern,white, with ball value, float and handle including brackets all as specified and directed. |
| 52 | Supply & fixing Angle stop valve cast copper alloy, with fancy type chromium plated capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete, all as specified. |
| 53 | Supply & fixing 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and directed. |
| 54 | Supply & fixing soap dish vitreous china white approximate size 160 x 160 x 90 fixed to plug with chromium plated brass screw complete all as specfied and directed. |
| 55 | Supply & fixing for 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgs/cm2 as in waster pipe for WHB and urinal waste pipe complete all as specified and directed. |
| 56 | Material & labour for PVC (SWR) multi floor trap diameter of outlet 75 mm with grating including jointing with solvent cement complete all as specified and directed. |
| 57 | Supply & fixing PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls 110mm bore complete all as specified and directed. |
| 58 | Supply & fixing PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls 75 mm bore complete all as specified and directed. |
| 59 | Supply & fixing PVC (SWR) bends any radius 110mm bore with access door complete all as specified and directed. |
| 60 | PVC(SWR) junction single (single 'T') equal or unequal 110mm bore with access to door ccomplete all as specified and directed. |
| 61 | Supply & fixing PVC (SWR) bends any radius 75 mm bore with access door complete all as specified and directed. |
| 62 | PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore with access to door ccomplete all as specified and directed. |
| 63 | Supply & fixing Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15 mm, all as specified. |
| 64 | Supply & fixing Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm, all as specified. |
| 65 | Preparation to new surfaces of wall and applying 3 coat of white wash complete all as specified and directed. |
| 66 | Material & labour for preparation of new plastered surfaces of ceiling including cornices, pilasters etc and applying three coat of white wash complete all as specified and directed. |
| 67 | Material & labour for complete removal of existing treatment and appllying two coats of weather proof exterior paint over a coat of primer and putty where required on wall including preparation of surfaces complete all as specified and directed. |
| 68 | Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 69 | Supply & fixing class SN 8 structured wall polyethylene piping system (pipe with online coupler and elastomeric rubber ring) with hollow annular profiled outer surface and a smooth inner surface (double wall corrugated) for non-pressure underground drainage and Sewerage application, Type B, Nominal Size (DN/ID) 150, made of polyethylene (PE) material conforming to per IS16098 (Part 2):2013 and to be transported, handled, installed and jointed as per Annex A of IS16098 (Part 2):2013 complete all as specified and as directed. |
| 70 | Supply & fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 incl a coat f red oxide primer al as specified and directed. |
| 71 | Supply & fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws or J hook all as specified directed by Engr - in - Charge. |
| 72 | Preparation of new or previously untreated steel surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 73 | Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface complete all as specified and directed. |
| 74 | Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 75 | 100 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing finishing the surface even and smooth as specified directed by Engr - in - Charge. |
| 76 | Material & labour for point wiring with 1.5 Sqmm PVC FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl concealed PVC conduit pipe as per site reqmt, ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, screws, gutti / roul plugs PVC all as per site requirements including sunken boxes for mounting of switches/ sockets/regulator etc and PVC FRLS insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead connected to common earth dolly complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green. (a) For one light point/fan Point controlled by one way switch. |
| 77 | (b) For one 5 Amp socket controlled by one way switch on same board. |
| 78 | (c) For one 5 Amp socket controlled by one way switch on Independent board. |
| 79 | All as per item No 76 above but wiring with 2.5 sqmm for power point. |
| 80 | Supply and fixing modular plate with frame of 8 module complete all as specified and directed by Engr in charge. |
| 81 | Supply and fixing modular plate with frame of 6 module complete all as specified and directed by Engr in charge. |
| 82 | Supply and fixing modular plate with frame of 3 module complete all as specified and directed by Engr in charge. |
| 83 | Supply and fixing modular switch 1 way 10 Amps 1 module complete all as specified and directed by Engr in charge. |
| 84 | Supply and fixing modular switch 1 way 16 Amps 1 module complete all as specified and directed by Engr in charge. |
| 85 | Supply and fixing modular socket 6 Amps 2/3 Pin combined 2 module complete all as specified and directed by Engr in charge. |
| 86 | Supply and fixing modular socket 6/16 Amps 2/3 Pin combined 2 module complete all as specified and directed by Engr in charge. |
| 87 | Supply and fixing in repair ceiling rose surface bakelite 65 x 50 mm three terminal complete all as specified and directed by Engr in charge. |
| 88 | Supply and fixing in lamp holder, PVC/Polycarbonate type with back plate suitable for batten/pendant fitting complete all as specified and directed by Engr in charge. |
| 89 | Supply and fix Adora LED lamp 10 watt, 2 star suitable for 240 volt complete all as specified and directed by Engr in Charge. |
| 90 | Supply & fixing MCB DB double door SPN 8 way 240 Volt complete all as specified and directed by Engr in charge. |
| 91 | Supply & fixing MCB SPN 32 Amp 230 Volt, 'C' Curve, with breaking capacity 10 KA complete all as specified and directed by Engr in Charge. |
| 92 | Supply & fixing MCB SP 6 to 32 Amp 230 Volt, 'C' Curve, with breaking capacity 10 KA complete all as specified and directed by Engr in Charge. |
| 93 | Supply & Fixing LED light fittings 1 x 20 watt, 220 v AC LED pride essential decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, enviornmental frendly energy efficient connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr in charge. |
| 94 | All as per item No 93 above but 10 watt complete all as specified and directed by Engr in Charge. |
| 95 | Material & labour for earthing complete with galvanised steel earth plate electrode 600 x 600x 6mm burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edged of the plate not less than 1.5 mtr below normal ground level, connected to galavanised iron earth lead by means of bolt, nut, check nut and washer of galavanised iron steel wire 4mm dia as earthing lead as shown in Electrical Plate No 4 of SSR Part I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/ loose soil, earth pit in PCC 1:3:6 type C1 using 20mm stone aggreate, funnel, 20mm dia GI med grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs, wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not excessding 50m, complete testing on completion all complete as shown in electrical plate no-4 of SSR part No1 all as directed. |
| 96 | Material and labour for fixing of street light bracket made out of 32 mm dia light grade GI pipe 1.5 mtr logn and bend to required shape to luminate the area complete all as specified and directed by Engr in charge. |
| 97 | Supply & fixing building security light LED fitting with pressure die cast housing, epoxy powder coated dark graphite grey colour finish and prismatic polycarbonate cover with individual LED lences suitable for including lamp LED 25 watt, fixed / connect properly at directed location on building complete all as specified and directed. |
| 98 | Supply & fix exhaust fan, steel body AC single phase 230 volt of size 300 mm sweep heavy duty double ball bearing with blades and frame and louver complete including making hole if not available at site complete all as specified and directed by Engr in charge. |
| 99 | Supply and fixing of electric water heater storage type steel body with glasslead inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV connection pipe complete all as specified and directed by Engr in Charge. |
| 100 | Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 2 core complete all as specified and directed by Engr in charge. |
| 101 | Supply and lay light grade GI pipe 40 mm dia fix to wall/ceiling/poles etc with suitable clamp for protection of cable complete all as specified and directed by Engr in charge. |
| 102 | Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth and getting out in hard/dense soil for removing/laying of pipe line, complete, all as specified and directed. |
| 103 | Returning, filling in including spreading, leveling and well ramming in layers not exceeding 25 cm in hard/dense soil, complete, all as specified and directed. |
| 104 | Removing excavated soil/materials, not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meter above the starting point, complete, all as specified and directed. |
| 105 | Supply and spread sand in cable trenches and providing cushioning for the cable complete . Note : Only punned thickness of 18cm will be measured for the purpose of payment. |
| 106 | Supplying and laying reinforced precast concrete cable cover, class LV, type 1 with flat of size 250mm x 150mm x 40mm complete for cable protection all as specified and directed by Engr in charge. |
| 107 | Material & labour for water Tubes, 'Medium grade' galvanised of 25 mm dia with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr in charge. |
| 108 | Material & labour for water Tubes, 'Medium grade' galvanised of 20 mm dia with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr in charge. |
| 109 | Supply and fixing Stop valves of 20 mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr in charge. |
| 110 | Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth and getting out in loose/soft soil for removing/laying of pipe line, complete, all as specified and directed. |
| 111 | Returning, filling in including spreading, leveling and well ramming in layers not exceeding 25 cm in soft/loose soil, complete, all as specified and directed. |
| 112 | Removing excavated soil/materials, not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meter above the starting point, complete, all as specified and directed. |
| 113 | NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 0.00/- ] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender