Tender For Addition/ Alteration Of Internal Compound Wall, Provn Of Drain And Sewar Line From Civ Staff Barrack Near Gate No 1, Provn Of Wall Mounted Fans, Provn Of Bldc Ceiling Fan And Water Heating System (Geyser), Provn Of Steel Ladder In Boys Blo
Tender Value
48.77 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
14 days left
EMD
97560
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/ Alteration Of Internal Compound Wall, Provn Of Drain And Sewar Line From Civ Staff Barrack Near Gate No 1, Provn Of Wall Mounted Fans, Provn Of Bldc Ceiling Fan And Water Heating System (Geyser), Provn Of Steel Ladder In Boys Blocks No 1 To 8, Provn Of Rain Protection Shed For Store Behind Guest Room No 2 At Dg Ncc C And Provn Of Entrance Iron Gate At Furniture Yard Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Demolition Brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 3 | Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/ loose soil complete. |
| 4 | M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and directed. |
| 5 | M & L for brick work in CM 1:6 using Sub class \\"B\\" bricks straight or curved on plan exc. 6m mean radius complete all as specified and as directed. |
| 6 | M & L for 15mm thick rendering in cement mortar 1:4 on other than fair face of brick walls/ concrete surfaces and finished even and fair in any position incl scaffolding etc, complete all as specified and as directed. |
| 7 | M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. |
| 8 | M & L for preparation of old plaster external wall and ceiling surfaces of and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. |
| 9 | Demolition of Stone slabs, paver block and tiles of any description incl sub base concrete of any thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed. |
| 10 | M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base complete all as specified and as directed. |
| 11 | M & L for Coloured Machine pressed precast concrete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-40 Grade with grey cement and pigment laid dry in over 40mm thick layer of sand as in floor/path complete all as specified and as directed. |
| 12 | M & L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:½:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern (groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove) complete including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified. (Note : Rate for making groove shall be deemed included in unit rate quoted and no extra payment shall be made for this item) |
| 13 | Providing and fixing factory made WPC railing combining WPC board 24 mm thick Fancy designer type grating and including WPC frame 100% solid WPC (wood polymer composite) railing of required length and of 2' to 2.5' height , comprising of virgin PVC resin of K value 58-60 (Suspension Grade) , Calcium Carbonate and natural fibres (Wood Powders/rice husk//wheat husk) and non toxic additives, made from single extrusion process, WPC foam board with having minimum density 650kg/cbm and WPC frame having minimum density 780kg/cbm manufactured by \\"RAJSHRI\\" an ISO 9001-2015 certified Company, having good screw holding capacity (screw withdrawal strength of 2000N (Face) & 1100N (Edge), Minimum comprising of 50N/mm2, Modules of elasticity 850N/mm2 and resistance of speed of flame of class A category with property of being termite/Borer free water /Moisture proof and fire resistance. For WPC railing WPC jali to be fixed with incl WPC frame of size 75x50mm with necessary supporting lengths at vertical as well as horizontal at wall frames to be fixed with 3\\"x3\\" GI 'L' or SS cleats to support vertical frame lengths complete all as specified and as directed. (Make : Rajshree/ Cobra or other approved and equivalent) (Note : The said item shall be fixed for view cutter in any positions as requirement at site) |
| 14 | M & L for one coat of synthetic enamel paint (finishing coat) over one coat of primer to old steel surfaces of any description over 10 cm width or girth incl preparation of surfaces complete all as specified. |
| 15 | M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 16 | Returning filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed. |
| 17 | Removing excavated materials to a distance exc 250m but n exc 500m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed. |
| 18 | Surface dressing not exc 15 cm deep and getting out in soft / loose soil, complete all as specified and directed. |
| 19 | Excavating over areas, not exc 1.5 m deep and getting out in soft/ loose soil, complete all as specified and as directed. |
| 20 | Description all as per item no 19.00 above but depth exc 1.50m but not exc 3.00m |
| 21 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 22 | M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 23 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide |
| 24 | M&L for RCC (1:1½:3) type A1 (Nominal Mix) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed. |
| 25 | M&L for Plain Cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed. |
| 26 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4), complete all as specified and directed. |
| 27 | Extra for forming fair finished drain or channel not exc 90 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. |
| 28 | M&L for cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) in surface channels and drains complete all as specified and directed. |
| 29 | S&F mild steel rungs in manhole drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 Complete all as specified and directed. |
| 30 | M&L for concrete bed to drain pipes laid in trenches incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 all as specified and directed for 150mm bore pipe, complete all as specified and directed. |
| 31 | M&L for salt galzed stone ware (SGSW) grade 'A' drain pipes 150mm bore laid and jointed on concrete bed complete incl testing complete all as specified and directed. |
| 32 | S & F for Precast RCC covers 75 mm thick medium duty conforming to IS-12592 of any shape and size as per requirement at site ,complete all as specified and as directed. |
| 33 | Machine pressed precast Chequered cement concrete tiles gray cement and pigment of size 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and incl 15mm thick screed bedding layer in CM 1:6, complete all as specified. |
| 34 | M & L for applying two coats of synthetic enamel paint over a coat of primer, any tint on brick work, kerb stone, concrete, asbestos cement or plastered surface exceeding 10cm width or girth including preparation of surfaces, complete all as specified and as directed. |
| 35 | Cleaning old sewage lines any Dia and cleaning of sludge with water from soakage well with mechanically operated 25 tonne truck mounted de-sludger with 12000 litre capacity tanker having water fitted high pressure Jet machine for cleaning and sludging of sewage line, sockage well, septic tank etc, shall be used by the contactor at per schedule program in written and completion of each job to the entire satisfaction of Engineer-in- charge as instructed. Note:- (a) Per day means 8 working hours in a day excluding standby period due to any reason. |
| 36 | Cutting opening in cement concrete in slab (any description) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc. |
| 37 | Cutting holes into or through in brick walls built, in cement mortar or cement lime mortar and stone walls superfacial area exc 150Sqcm but not exc 400 Sqcm. |
| 38 | M & L for Stainless Steel work of Grade-304 as in vertical handrail /side support,of any type and size including special shaped washers, channels, plates (horizontal/ vertical/cantilever type work) also ornamental works like designer railing chain, lattoo any type and size as approved by GE and as reqd at site made of hollow tubes or in any other shape as per requirement at site, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary nuts and bolts dash fasteners, stainless steel bolts etc., of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. (Note :- No extra payment shall be made to the contractor for ornamental works of this item). |
| 39 | Surface excavation not exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil, complete all as specified & directed. |
| 40 | Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/ loose soil, complete all as specified & directed. |
| 41 | M&L MS Steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified & directed. |
| 42 | M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified & directed. |
| 43 | M&L preparation new steel surface over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 44 | Sand filling under floors or in foundations including watering and consolidation |
| 45 | 75mm thick plain cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in sub base complete all as specified. |
| 46 | S & F framed work such as in door frame, door shutters /angle iron for gate/staging for water tank/railing/grills/sliding door bolt or other section with gusset plates, rails, braces,holdfast etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including fastening and fixing of Fe 410-W (Gde E-250 quality) etc complete all as specified. Note:-Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket/holdfast of security wall. Contractor shall make his own arrangement for welding for boundary wall by using gen sets or any alternative arrangement all as specified and directed by Engr-in-Charge. |
| 47 | S&F for 2mm thick fibre glass reinforced translucent plain/corrugated (as directed at site by Engr in charge) sheeting fixed with coach screw and washer in roof, wall etc complete all as specified. |
| 48 | M&L for RCC 1:1½:3 type A1 (nominal mix) using 20mm graded aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 49 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 50 | M &L for TMT bar stirrups 6mm dia and over up to 8mm,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 51 | 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms,dado/wall and like over 15mm thick cement mortar 1:4 including pointing in white cement mortar 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 52 | 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms,dado/wall and like over 15mm thick cement mortar 1:4 including pointing in white cement mortar 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender