Tender For Welcome Maintenance And Misc Repair For Officers Md Accn At Ncb, Navy House, 32 Weu Under Age B/R-I Of Ge (Nd) Visakhapatnam.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
13 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance And Misc Repair For Officers Md Accn At Ncb, Navy House, 32 Weu Under Age B/R-I Of Ge (Nd) Visakhapatnam.
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I: B/R WORKS |
| 2 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets complete all as specified and directed upto 11th floor. |
| 3 | Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions. |
| 4 | S &F of Anodised aluminium snap grid frame work of size 605 X 605 mm for false ceiling all as specified. |
| 5 | Hangers 4 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40 x 3 mm size 60 mm long & expansion hold fastners 12.5 mm dia 40 mm long complete all as specified. |
| 6 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., all as directed by the Engineer in Charge. |
| 7 | M & L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4). |
| 8 | M & L for brick work with fly ash bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6). |
| 9 | Taking down of cement plaster of any description on brick or stone walls,ceiling,chajja,roofprojection etc including raking out joints, hacking for key, scrubbing down with water etc. |
| 10 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement. |
| 11 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished even and fair without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions (WPC shall be measured & paid separately). |
| 12 | Supply only liquid water proofing compound of approved quality. |
| 13 | M&L fo Rendering 5 mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of chajja,roof projection,shelve etc and finished even and smooth without using extra cement. |
| 14 | M & L for application of pre-batched one component Polymer modified protective Mortar (PMPM) of thickness 12-15mm of Sika Top-22 manufactured by M/s Sika India Pvt Ltd or its equivalent in M/s Fosroc Chemicals India (P) Ltd or M/s STP Ltd or M/s Choksey Chemicals Pvt Ltd or M/s Bostik India Pvt Ltd for repair of spalled and damaged concrete in RCC Structure and superstructure works including bond coat manufactured by M/s Sika India Pvt Ltd or its equivalent in M/s Fosroc Chemicals India (P) Ltd or M/s STP Ltd or M/s Choksey Chemicals Pvt Ltd or M/s Bostik India Pvt Ltd or M/s Asian for bonding old and new concrete surfaces, including double scaffolding and safety measures as required and specified with necessary tools and machinary, curing, consumables etc. for any height upto 11th floor buildings complete all as per manufacturers all as specified and as directed. |
| 15 | M&L Preparing newly plastered wall / ceiling surfaces and applying two coats of distemper oil emulsion over priming coat of alkali resistant complete all as specified and as directed. |
| 16 | Preparing newly plasterd surfaces of ceilings and applying three coats of white wash by auto roller all as specified and directed. |
| 17 | M&L Preparing newly plastered wall surfaces and applying two coats of cement base paint over one coat of white wash complete all as specified and as directed. |
| 18 | M & L for preparation of newly plastered surfaces of walls/celling and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over priming coat of exterior primer applied 0.90 litre/10sqm over and including suitable thickness wall care putty for making good undulations to obtain smooth surface complete all as specified and directed. |
| 19 | Complete removal of existing treatment and applying two coats of exterior emulsion weather proof coat paint [ APEX Ultima or equivalent ] over a coat of primer on external wall surfaces [ upto 11 th storey ] complete as per manufacturers instructions and all as specified and directed. |
| 20 | Complete removal of existing treatment over wall surfaces applying including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer upto 11 th storey complete all as specified and as directed. |
| 21 | M&L for n exc 2mm thick wall care putty on walls complete all as specified and directed by Engineer-in-charge |
| 22 | Preparing old surfaces wall and applying one coat of distempered oil emulsion by auto roller all as specified and directed. |
| 23 | Preparing old surfaces wall and applying two coat of distempered oil emulsion by auto roller all as specified and directed. |
| 24 | Preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of white wash by auto roller all as specified and directed. |
| 25 | Preparing old surfaces of ceilings by brooming down or by steel wire brushing and applying one coat of white wash by auto roller all as specified and directed. |
| 26 | Preparation of old painted surfaces of cement or plastered surfaces, of any description and girth and, not otherwise described in any location and applying one coat of plastic emulsion on walls / ceiling by auto roller all as specified and directed. |
| 27 | Preparation of old painted surfaces of cement or plastered surfaces, of any description and girth and, not otherwise described in any location and applying two coat of plastic emulsion on walls / ceiling by auto roller all as specified and directed. |
| 28 | M&L for removal of existing treatment from old decorated plastered surface of wall, apply one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint complete all as specified and as per specified by Engineer -in-Charge upto 11 floor. |
| 29 | M&L Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint). |
| 30 | M&L Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint. |
| 31 | M&L for Providing and injecting chemical emulsion for Anti Termite Treatment along the external wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes etc. in apron. |
| 32 | M&L for providing and injecting chemical emulsion for Anti Termite treatment at the point of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 ltr per hole by drilling 6mm dia at a downward angle 45 degree at 150 mm centre to centre all as directed |
| 33 | Dismentling of floor hearth or wall tiling of any description including cement mortar bedding (but not backing),removing serviceable tiles to store & rubbish off the premises |
| 34 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:4) for backing of tiles. |
| 35 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match. |
| 36 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and over and including a 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match. |
| 37 | M & L for Coloured Glazed ceramic tiles 300 x 450 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in cement morter (1:4) complete all as specified. |
| 38 | M&L for Vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, as in floors etc set & jointed in neat cement slurry & pointed in white or Light coloured cement to match including screed bed of 15mm thick in cement mortar 1:6 complete all as specified. |
| 39 | M&L for Vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, on vertical surfaces for skirting, set & jointed in neat cement slurry & pointed in white or Light coloured cement to match including 10 mm thick rendering in cement mortar (1:4) for backing of tiles complete all as specified. |
| 40 | M&L 18/20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 41 | M & L for PCC 1:5:10, type E-2 using 40mm graded stone aggregate as in foundation, sunken floor filling and mass concrete including demolition of old sunken floor concrete complete all as specified and directed. |
| 42 | M & L for Rendering 10mm thick on fair faces of brick or concrete surfaces in CM 1:4 mixed with water proofing compound finished fair and even (without using extra cement) complete as specified and directed. Note: Water proofing compound shall be measured and paid separately. |
| 43 | M & L for applying Nitto bond two coats on plastered surfaces as per manufacturer instructions etc complete all as specified. |
| 44 | M & L for 25mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded stone aggregate as in sub base of floors complete all as specified and directed. |
| 45 | Removing plants / herbs grown on walls/junctions with roots using herbicide chemical and of existing brick and concerte in high raised building upto 11th floor. |
| 46 | S & F in repairs 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, complete all as directed. |
| 47 | S&F in repairs wash down water closet (pedestal pattern) of any colour including P or S trap and fixing of bolts complete all as specified. |
| 48 | S&F in repairs flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern |
| 49 | S&F in repairs plastic WC seat cover any colour pedestal pattern, closed pattern with flat bottom and cover and mild steel shromium plated or aluminised hinging devices complete all as specified. |
| 50 | S & F in repairs Vitreous China Squatting pan, Orissa' pattern, size 580 x 440 mm white with integral foot rests confirming to IS 2556 part II of pettern 1 having P trap complete all as specified and directed. |
| 51 | M & L in repairs for PVC (SWR) plain Floor/ Nahani trap of 75/110 mm dia., outlet including jointing with solvent cement complete all as specified and directed. |
| 52 | S&F in repairs chromium plated grating of size 125mm dia (with hole or without hole) complete all as specified. |
| 53 | S&F in repairs PVC flexible waste pipe 32/40 mm dia with socket, 100 cm long for WHB/Sink upto 11th floor. |
| 54 | S&F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand. |
| 55 | S&F in repairs 32mm dia, Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed. |
| 56 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm including necessary washers all as specified and directed. |
| 57 | S&F in repairs 15mm bore pillar taps fancy type, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe. |
| 58 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. |
| 59 | S&F in repairs 15mm bore Stop valves/angle valve fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 60 | S&F in repairs Two way bib tap Chromium plated 15mm Dia cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions of make Jaquar cat No.KUP35041PM complete all as specified and directed. |
| 61 | S&F in repairs 15mm bore brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and all necessary fittings. |
| 62 | S&F in repairs 15 mm bore fancy type, chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 63 | S&F in repairs 15 mm bore fancy type, chromium plated long body bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 64 | S&F CP health faucet including one mtr length conncting pipe all as specified of jaguar or equivalent make. |
| 65 | S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints, any size, including to steel pipe or union as in repairs complete all as specified and directed. |
| 66 | S & F in repairs 15 mm bore dia.,fancy type bib tap of PTMT any colour of minimum weight 105 grams, screwed for iron pipe and fixed upto 11th floor complete all as specified and directed. |
| 67 | S&F Corner glass shelves 225mm radious,6mm thick as per sample radious for bath room, fixed on suitable support all as directed. |
| 68 | S&F Glass shelves 45cm long, 125 mm wide, 6mm thick fixed on suitable support all as directed. |
| 69 | S&F PVC body cabinet box mirror of size 350mm x 450mm x 100mm in PTMT alloy of approved patterns and design. Make: PRAYAG or equivalent as approved by GE. |
| 70 | S&F in repairs 32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gms). |
| 71 | S & F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 72 | S & F in repairs Brass chromium plated towel Ring , fency type complete all as specified and directed. |
| 73 | S & F in repairs Soap dish, chromium plated of approximate size 120mm x 100mm x 40 mm embedded in the wall complete all as specified and as directed. |
| 74 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 75 | S & F 110mm bore PVC (SWR) soil, waste or rain water pipes single socketed in any length with rubber ring joints laid in trenches or floors , including taking down old pipes complete all as specified and directed. |
| 76 | M & L for PVC (SWR) bends any radius 110mm bore with oval access door complete all as specifiede and directed. |
| 77 | M & L for 110mm bore PVC (SWR) junction single, (Single T) equal Or unequal with access door complete all as directed. |
| 78 | S & F 75mm bore PVC (SWR) soil, waste or rain water pipes single socketed in any length with rubber ring joints laid in trenches or floors , including taking down old pipes complete all as specified and directed. |
| 79 | S& F PVC (SWR) bends any radius 75 mm bore with access door all as specified and as directed. |
| 80 | S&F in repairs 75 mm PVC (SWR) branch piece, single (single T) equal or unequal with access doorall as specified and as directed. |
| 81 | Supplying and laying of 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls, ceiling or in floors etc. including taking up or down of old steel tubing and connections for any height upto 11th floor complete all as specified and directed. |
| 82 | Supplying and laying of 25 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls, ceiling or in floors etc. including taking up or down of old steel tubing and connections for any height upto 11th floor complete all as specified and directed. |
| 83 | Taking down chowkats or frames not exc 1.5 sqm each without taking off shutters from the frame upto 11th floor. |
| 84 | Taking down chowkats or frames exc 1.5 sqm but not exc 4 Sqm each without taking off shutters from the frame upto 11th floor. |
| 85 | Taking down shutters exc 1.00 but n.exc 2.00 Sqm each. |
| 86 | S&F Factory made UPVC coloured Sliding Window of area not exceeding 2.0 Sq.m, Three Track made of extruded profiles with wall thickness of 2.3mm [± 0.2mm], Window profile with hollow section with multi chamber, frame [112mm X 52mm], sliding sash [42mm X 67mm], Sliding mesh sash [42mm X 57mm], sliding interlock (One vertical length in each shutters) [45.50mm X 28mm], Glazing bead [24.50mm X 16mm] will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water, etc. , making arrangement for fixing of hardware, EPDM gasket 1.2 ± 0.2mm thick galvanized steel frame [30mmx 18mm] 2 Nos, sliding sash [30mm x 18mm], sliding mesh sash [26mm x 10mm] profile to be inserted in required profile, frame will be fixed to the wall with 8mm X 100mm long fasteners. Hardware [Touch lock of zinc alloyed (white powder coated), Steel roller system, stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. To be provided with proper operative and locking hardware mechanism, frame to be fixed to wall with high quality fasteners and silicon glue is to be applied to fill up gap between frame and wall to make leak proof, complete all as specified and as per SSR. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 87 | S&F Factory made UPVC coloured fixed or casement window / ventilator of area not exceeding 1.0 Sq.m, made of extruded profiles with wall thickness of 2.3mm [ ± 0.2mm], Window profile with hollow section with multi chamber, frame [60mm X 58mm], T profile (One vertical length in between two shutters) [60mmx 74mm], Glazing bead [35mm X 20mm] will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water of etc., making arrangement for fixing of hardware, EPDM gasket 1.2 ± 0.2mm thick galvanized steel frame [28mmx 21.5mm], T profile [27mm x 17mm] to be inserted in required profile, frame will be fixed to wall with 8mm X 100mm long fasteners. 5mm thick glazing with selected quality glass, complete all as specified and as per SSR. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 88 | S&F in repairs Aluminium Sliding window shutter three track section for frames of weight not less then 1.17 kg/Rm and sliding section for shutter frame all round with aluminium section of weight not less then 0.42 kg /Rm including necessary aluminium fittings and 5 mm thick selected quality tinted/plain glass/ SS wire mesh etc complete all as specified and as directed. |
| 89 | S&F in repairs Aluminium openable/sliding door shutter section for frames of weight not less then 1.17 kg/Rm and sliding section for shutter frame all round with aluminium section of weight not less then 0.42 kg /Rm including necessary aluminium fittings and 5 mm thick selected quality tinted/plain glass/ SS wire mesh etc complete all as specified and as directed. |
| 90 | S & F in repairs Aluminium anodised grill of make \\"Deco grill\\" and DG - 104 model with apperture of size 105 x99 mm, suitable ''F'' or ''E'' section fixed to window/ventilator frame for securing Deco grill and interlock and secruing the frame to masonry wall with brass screws complete all as specified and directed. |
| 91 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing up to 11th floor |
| 92 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. upto 11th floor. |
| 93 | S&F factory made solid fixed ventilator of size 50x47mm made out of extruded 5mm thick PVC sheet mitred cut at two corners and joined with 2Nos of 150mm long brakets of 15x15mm MS square tube, the two vertical porfiles are to be reinforced with 19 x 19 mm MS tube and 50% of portion is fixed with 3 mm thick pin headed/frosted glass and remaining portion is covered with wire mesh and 3 mm thick pin headed/frosted glass louvers including 12mm dia MS guard bars and necessary fixtures upto 11h floor. |
| 94 | S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 95 | S&F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel. |
| 96 | S & F 30mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.sizes of members of shutters as specified in SSR Part I, Section 8 Clause 8.24(a) |
| 97 | M & L for applying two coat of synthetic enamel paint to old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth including preparation of surfaces all as specified and directed by the Engineer-in-Charge. |
| 98 | S&F 40 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels & both faces covered with decorative face 2 to 3 mm thick veneering with lipping/ frame to match all as specified and directed. |
| 99 | Hacking out old broken glass (any thickness size quality or description) from wooden , steel or aluminium frames glazed with putty or fixed with wooden beads complete all as directed upto 11th floor |
| 100 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares n.exc 0.5 sqm in each pane upto 11th floor |
| 101 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares exc 0.5 sqm in each pane upto 11th floor |
| 102 | S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including new beading complete all as specified and as directed upto 11th floor |
| 103 | S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed upto 11th floor |
| 104 | Taking down of existing Aluminium window frame with shutters of any size and taking down of existing Aluminum wire mesh and fixing with new aluminium wiremesh of 0.45mm dia of wire and average aperture is 1.40mm in repairs and re fixing the Aluminium window in same opening with necessary fixing arrangements. |
| 105 | S&F mild steel hold fast made out of MS flat iron for chowkats and other small articles including making shape, drilling hole etc. complete all as specified and as directed. |
| 106 | Cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in hold fast. |
| 107 | S&F 100 mm cast brass with mild steel hinges fixed with stainless steel screws. |
| 108 | S&F in repairs 100 mm cast brass with mild steel hinges fixed with stainless steel screws. |
| 109 | S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 110 | S&F in repairs 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 111 | S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 112 | S&F in repairs 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 113 | S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 114 | S&F in repairs 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 115 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple [bolt type] and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed. |
| 116 | S&F in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple [bolt type] and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed. |
| 117 | S&F 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple [bolt type] and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed. |
| 118 | S&F in repairs 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple [bolt type] and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed. |
| 119 | S&F in repairs 300 mm, Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 120 | S&F in repairs Aluminium (extruded section) body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg. |
| 121 | S & F in repairs Powder coated fancy type Stainless Steel curtain rod 20mm dia curtain rod of make as approved by GE complete all as specified and as directed. |
| 122 | Stainless steel fancy type curtain bracket matching to curtain rod complete all as specified and directed. |
| 123 | S& F in repairs rubber beading 50 mm wide and 5 mm thick upto 11th floor. |
| 124 | S&F in repairs Plate racks made out of 0.8 mm thick .stainless steel, of size 900x750x300 to 750x600x 250 mm all as specified and directed upto 11th floor |
| 125 | M&L Dismantling boarding of any description, fixed in any position with nails. |
| 126 | S&F 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work all as specified and as directed. |
| 127 | S&F 0.9 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions all as specified and as directed.upto 11th floor. |
| 128 | M&L for Prelaminated particle board 18/19 mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work and particle board fitted with external teak wood lipping, 6mm thick fixed with nails up to 11th floor complete all as specified and as directed. |
| 129 | S & F Aluminium Anodised Hasp and Staple, including bolt to hing plate and fixed with screws 100 mm size |
| 130 | S & F 50mm dia, polished, hardwood knobs fixed with screws and in repairs complete all as specified and as directed. |
| 131 | S&F Godrej Mortice lock, vertical type, size 100mm 4 levers mild steel include for escutcheon plates and two keys. |
| 132 | S&F Magnet Catches with Striking Plate, 40mm size superior quality and Brass Body and including letting complete all as specified and as directed. |
| 133 | S&F full overlay slow motion 3D hinge (3D hydraulic clip) complete all as specified and as directed. |
| 134 | S&F brass handles extruded fabricated type 100mm size upto 11th floor complete all as specified and as directed. |
| 135 | S & F in repair Stainless steel Utensil Basket of AISI -304 grade fitted to plywood all as per Sketch \\"P\\" all as specified and as directed including dismaintling of old basket. Make: Godrej / Evershine / Hettich |
| 136 | S & F in repair Stainless steel Cutlery Basket of AISI -304 grade fitted to plywood all as per Sketch \\"P\\" all as specified and as directed including dismaintling of old Basket. Make: Godrej / Evershine / Hettich |
| 137 | S & F in repair Stainless steel Thali Basket of AISI -304 grade fitted to plywood all as per Sketch \\"P\\" all as specified and as directed including dismaintling of old basket. Make: Godrej / Evershine / Hettich |
| 138 | S & F in repair Stainless steel Plain Basket of AISI -304 grade fitted to plywood all as per Sketch \\"P\\" all as specified and as directed including dismaintling of old basket. Make: Godrej / Evershine / Hettich |
| 139 | S & F in repair Stainless steel Bottle Tray of 2 shelves of AISI -304 grade fitted to plywood all as per Sketch \\"P\\" all as specified and as directed including dismaintling of old basket. Make: Godrej / Evershine / Hettich |
| 140 | S & F in repair Stainless steel telescopic channel heavy duty suitable for fixing stainless steel baskets all as specified and as directed. Make: Godrej / Evershine / Hettich |
| 141 | Demolition of cement concrete in Ground floors and pavings nexc 15cm thickness complete all as directed. |
| 142 | M&L Plain Cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) in sub base of hard standing including finishing the surface even and smooth using extra cement. all as specified and directed by Engineer-in-charge. |
| 143 | Preparing old surfaces of walls and applying one coat of cement based paint by auto roller all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender