Tender For Maintenance & Repair/ Replacement To Certain Wooden Furniture Under Ge (East) Bareilly
Tender Value
30.45 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
14 days left
EMD
60900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance & Repair/ Replacement To Certain Wooden Furniture Under Ge (East) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER BAREILLY Name of Work : MAINT & REPAIR/ REPLACEMENT TO CERTAIN WOODEN FURNITURE UNDER GE (EAST) BAREILLY Contract No :CWE BLY/ GE(E)/ 89 OF 2026-27 Bidder Name : SCHEDULE A(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Notes applicable to Sl item Nos 2.00 to 20.05 :-(a) Removal of following existing unserviceable wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and S&F of new components in lieu of dismantled components including tightning the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing every part intact the disturbed portion as applicable as per drawing and as directed by Engr-in-Charge. (b) The timber shall be of 1st class seasoned hardwood teak. |
| 3 | Chair Dinning Cushioned Drg No. FD/E6/MAP/10 |
| 4 | (a) Removing of existing old Rear leg and replacement of new Rear leg as per drg and directed by Engr-in-charge |
| 5 | (b) Removing of existing old Front leg and replacement of new front leg as per drg and directed by engr-in-charge. |
| 6 | (c) Removing of existing old Side/back/front rail and replacement of new Side/back/front rail as per drg and directed by engr-in-charge. |
| 7 | (d) Removeing of existing old back strip and replacement of new back strip as per drg and directed by engr-in-charge. |
| 8 | (e) Removing of existing old Stiffener and replacement of new Stiffener as per drg and directed by engr-in-charge. |
| 9 | (f) PVC Shoe |
| 10 | (g) M&L for providing 75 mm thick new cushion of appropriate size of 32 density cool foam (Make Sleepwell Primo Cool/ Kurlon/Godrej or equivalent) duly covered with tapestry cloth and fixed on 12 mm thick plywood sheet complete with dismantling of old unserviceable one. Note: Cost of tapestry cloth shall not be less than Rs. 450/- per RM (Make DCM/ Reliance/ S Kumar or equivalent) and shall be as per sample approved by GE. The sample of cloth is kept with BSO GE (East) Bareilly. |
| 11 | Chair Dining Drg No. FD-285 |
| 12 | (a) Removing of existing old Rear leg and replacement of new Rear leg as per drg and directed by engr-in-charge. |
| 13 | (b) Removing of existing old Front leg and replacement of new front leg as per drg and directed by engr-in-charge. |
| 14 | (c) Removing of existing oldSide/back/front railand and replacement of new Side/back/front railand as per drg and directed by engr-in-charge. |
| 15 | (d) Removing of existing old Stiffener and replacement of new Stiffener as per drg and directed by engr-in-charge. |
| 16 | (e) Removing of existing old Back rest and replacement of new Back rest as per drg and directed by engr-in-charge. |
| 17 | (f) PVC Shoe |
| 18 | (g) M&L for recanning of chair dinning in 'Godrej' pattern with 2 mm wide & 0.6 mm thick for centre portion and 4 mm wide plastic cane for borders of Make Premier/Saha including dismantling of old unserviceable one complete all as per drw directed by Engineer -in-charge |
| 19 | Sofa Set 04/05 Seater Drg No. FD/MAP-II/02 |
| 20 | (a) Removing of existing old Front leg and S&F of new Front leg and replacement of new Front leg and S&F of new Front leg as per drw directed by Engineer -in-charge |
| 21 | (b) Removing of existing old Rear leg and S&F of new Rear leg and replacement of new Rear leg and S&F of as per drw directed by Engineer -in-charge. |
| 22 | (c) Removing of existing old Batten and replacement of new Batten as per drw directed by Engineer -in-charge |
| 23 | (d) Removing of existing old Seat and back side rail (three seater)new replacement as per drw directed by Engineer -in-charge |
| 24 | (e) Removing of existing old Seat and back long rail (three seater) and replacement of new Seat and back long rail (three seater) as per drw directed by Engineer -in-charge |
| 25 | (f) Removing of existing old Seat and back side rail (single seater) and replacement of new Seat and back side rail (single seater) as per drw directed by Engineer -in-charge |
| 26 | (g) Removing of existing old Seat and back long rail (single seater) and replacement of new Seat and back long rail (single seater) as per drw directed by Engineer -in-charge |
| 27 | (h) Removing of existing old Hand rest and replacement of new Hand rest as per drw directed by engineer -in charge. |
| 28 | (j) PVC Shoe |
| 29 | (k) M&L for providing new cushion of 40 density cool foam of size 560x530x110 mm thick of Make Sleepwell Primo Cool/ Kurlon/ Godrej or equivalent complete all as specified, directed and as shown on drawings. |
| 30 | (l) M&L for providing new tapestry cloth cover for seat and back foam of sofa sets of approved shade & quality with two zips of Make YKK on one side of cover for easy removing/closing purposes etc to cover the foam of size 560x530x110 mm thick complete all as specified, directed and as shown on drawings. Note: Cost of tapestry cloth shall not be less than Rs 400/-per RM (Make DCM/ Reliance/ S Kumar or equivalent) colour and texture of tapestry shall be approved by the GE. The sample of cloth is kept with BSO GE (East) Bareilly. |
| 31 | Chair Easy Drg No. FD-229 |
| 32 | (a) Removing of existing old Rear leg and S&F and replacement of new Rear leg as per drwirected by Engineer -in-charge |
| 33 | (b) Removing of existing old Front leg and S&F and replacemnet of new Front leg as per drwirected by Engineer -in-charge |
| 34 | (c) Removing of existing old Arm and replacement of new Arm as per drwirected by Engineer -in-charge |
| 35 | (d) Removing of existing old Front/back/side rail of seat and back and replacement of new Front/back/side rail of seat and back as per drwirected by Engineer -in-charge |
| 36 | (e) PVC Shoe |
| 37 | (f) M&L for recanning of the seat & back of chair easy in 'Godrej' pattern with 2 mm wide & 0.6 mm thick for centre portion and 4 mm wide plastic cane for borders including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 38 | Chair Writing Drg No. FD-202 |
| 39 | (a) Removing of existing old Rear leg and S&F and replacement of new Rear leg as per drwirected by Engineer -in-charge |
| 40 | (b) Removing of existing Front leg and S&F of new Front leg as per drwirected by Engineer -in-charge |
| 41 | (c) Removing of existing old Rear/front/side rail and replacement of new Rear/front/side rail as per drwirected by Engineer -in-charge |
| 42 | (d) Removing of existing old Arm and replacement of new Arm as per drwirected by Engineer -in-charge |
| 43 | (e) Removing of existing old Back rest and replacement of new Back rest as per drwirected by Engineer -in-charge |
| 44 | (f) Removing of existing old Stiffener and replacement of new Stiffener as per drwirected by Engineer -in-charge |
| 45 | (g) PVC Shoe |
| 46 | (h) M&L for recanning of the seat of chair writing in 'Godrej' pattern with 2 mm wide & 0.6 mm thick for centre portion and 4 mm wide plastic cane for borders including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 47 | Bed hard Plywood Top Drg No.FD-246, FD-247. S&F of following new components of bedhard plywood top comprising outer member made of teakwood and internal frame made of cheer wood, covered both sides of board with 3.5 mm thick one side teakwood finish plywood with 12 mm thick half cut teakwood beading including dismantling of old unservicable one complete all as specified, directed and as shown on drawings: |
| 48 | (a) Removing of existing old Head board complete with legs and replacement of new Head board complete with legs as per drwirected by Engineer -in-charge |
| 49 | (b) Removing of existing old Foot board complete with legs and replacement of new Foot board complete with legs as per drwirected by Engineer -in-charge |
| 50 | (c) Removing of existing old Long rail and replacement of new long rail as per drwirected by Engineer -in-charge |
| 51 | (d) Removing of existing old Stiffner and replacement of new stiffner as per drwirected by Engineer -in-charge |
| 52 | (e) Removing of existing old Wooden bracket and replacement of new Wooden bracket as per drw directed by Engineer -in-charge |
| 53 | (f) S&F of top of bedhard plywood top made of 12 mm thick BWP grade with suitable screws including dismantling of old unservicable one complete all as specified, directed and as shown on drawings. |
| 54 | Table Centre Drg No. FD-375 |
| 55 | (a) Removing of existing old Leg and replacement of new Leg as per drw directed by Engineer -in-charge |
| 56 | (b) Removing of existing old Top rail (long/front) and replacement of Top rail (long/front) as per drw directed by Engineer -in-charge |
| 57 | (c) Removing of existing old Top rail (short/side) and replacement Top rail (short/side) as per drw directed by Engineer -in-charge |
| 58 | (d) PVC Shoe |
| 59 | (e) Top made of 18 mm thick prelaminated MDF board exterior grade ISI marked duly post-formed with 0.6mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine complete including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 60 | Table Dinning 1200x900mm. |
| 61 | (a) Removing of existing old Leg and replacement of new Leg as per drw directed by Engineer -in-charge |
| 62 | (b) Removing of existing old Top rail (long/front) and replacement of new Top rail (long/front) as per drw directed by Engineer -in-charge |
| 63 | (c) Removing of existing old Top rail (short/side) and replacement of new Top rail (short/side) as per drw directed by Engineer -in-charge |
| 64 | (d) Removing of existing old Corner cleat and replacement of Corner cleat as per drw directed by Engineer -in-charge |
| 65 | (e) PVC Shoe |
| 66 | (f) Top made of 18 mm thick prelaminated MDF board exterior grade ISI marked (Make Greenply/Archidply/Century/Action Tesa/Duro) duly post-formed with 0.6mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine complete including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 67 | Table Dinning for 06 Persons Drg No. FD-30(M |
| 68 | (a) Removing of existing old Leg and repalacement of new Leg |
| 69 | (b) Removing of existing old Top rail (long/front) and replacement of new Top rail (long/front) as per drw directed by Engineer -in-charge |
| 70 | (c) Removing of existing old Top rail (short/side Top rail (short/side) and replacement of new Top rail (short/side) as per drw directed by Engineer -in-charge |
| 71 | (d) Removing of existing old Corner cleat and replacement of new corner cleat as per drw directed by Engineer -in-charge |
| 72 | (e) PVC Shoe |
| 73 | (f) Top made of 18 mm thick prelaminated MDF board exterior grade ISI marked (Make Greenply/Archidply/Century/Action Tesa/Duro) duly post-formed with 0.6mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine complete including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 74 | Teapoy Drg No. FD-232 |
| 75 | (a) Removing of existing old Leg and replacement of new Leg as per drw directed by Engineer -in-charge |
| 76 | (b) Removing of existing old Top rail (long/front) and replacement of new Top rail (long/front) as per drw directed by Engineer -in-charge. |
| 77 | (c) Removing of existing old Top rail (short/side) and replacement of new Top rail (short/side) as per drw directed by Engineer -in-charge |
| 78 | (d) PVC Shoe |
| 79 | (e) Top made of 18 mm thick prelaminated MDF board exterior grade ISI marked (Make Greenply/Archidply/Century/Action Tesa/Duro) duly post-formed with 0.6mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine complete including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 80 | Table 3'x2' with/without Drawer Drg No. FD-283 |
| 81 | (a) Removing of existing old Leg and replacement of new Leg as per drw directed by Engineer -in-charge |
| 82 | (b) Removing of existing old Top rail (long/front) and replacement of new Top rail (long/front) as per drw directed by Engineer -in-charge |
| 83 | (c) Removing of existing old Top rail (short/side) and replacement of new Top rail (short/side) as per drw directed by Engineer -in-charge |
| 84 | (d) PVC Shoe |
| 85 | (e) Top made of 18 mm thick prelaminated MDF board exterior grade ISI marked (Make Greenply/Archidply/Century/Action Tesa/Duro) duly post-formed with 0.6mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine complete including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 86 | (f) Drawer made of 12 mm thick BWP grade plywood and front side made of 18 mm thick prelaminated MDF board one side laminated finish including provision of knob completed all as specified, directed and as shown on drawings. |
| 87 | Table Peg Drg No. FD- 277. |
| 88 | (a) Removing of existing old Leg and replacement of new Leg as per drw directed by Engineer -in-charge |
| 89 | (b) Removing of existing old Top rail (long/front) and replacement of new Top rail (long/front) as per drw directed by Engineer -in-charge |
| 90 | (c) Removing of existing old Top rail (short/side) and replacement of new Top rail (short/side) as per drw directed by Engineer -in-charge |
| 91 | (d) PVC Shoe |
| 92 | (e) Top made of 18 mm thick prelaminated MDF board exterior grade ISI marked (Make Greenply/Archidply/Century/Action Tesa/Duro) duly post-formed with 0.6mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 2mm thick PVC edging fixed on two sides of Make Rehau/Pegasus/Kynex with strong bonded chemical adhesive through hot pressed machine complete including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 93 | Side Board Drg No. FD-372, FD/E6/MAP/09. |
| 94 | (a) S&F of door shutters (both) made of 18 mm thick Pre-laminated MDF board exterior grade duly providing 6 mm thick teak wood beading all round with fittings and fixtures including dismantling of old unserviceable one complete all as specified, directed and shown on drawings. Note: All fittings and fixtures shall be of approved size and quality as per existing. |
| 95 | (b) S&F of the front portion of drawer as to match with the existing made out of 18 mm thick prelaminated MDF board with laminated finish and knob including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 96 | (c) S&F of top made of 18 mm thick prelaminated MDF board one side laminated alongwith 4 mm thick teakwood beading including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 97 | (d) S&F of 3.4 mm thick one side teak face plywood on sides (both) including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 98 | (e) S&F of back made of 6 mm thick commercial ply wood including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 99 | Bin lanin Multipurpose Drg No. FD/E6/MAP/09. |
| 100 | (a) S&F of door shutters (both) made of 18 mm thick Pre-laminated MDF board exterior grade duly providing 6 mm thick teak wood beading all round with fittings and fixtures including dismantling of old unserviceable one complete all as specified, directed and shown on drawings. Note: All fittings and fixtures shall be of approved size and quality as per existing. |
| 101 | (b) S&F of the front portion of drawer as to match with the existing made out of 18 mm thick prelaminated MDF board with laminated finish and knob including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 102 | (c) S&F of top made of 18 mm thick prelaminated MDF board one side laminated alongwith 4 mm thick teakwood beading including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 103 | (d) S&F of 3.4 mm thick one side teak face plywood on sides (both) including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 104 | (e) S&F of back made of 6 mm thick commercial ply wood including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 105 | (a) S&F of new looking mirror with frame of 5 mm thick of appropriate size with frame along with 6 mm thick commercial plywood back of the mirror and minor repairs including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 106 | (b) S&F of new drawer made of 12 mm thick commercial plywood and front side made of 18 mm thick pre-laminated MDF board one side laminated finish and provision of knob including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 107 | (c) S&F of new top made of 18 mm thick prelaminated MDF board exterior grade of shade as approved by GE including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 108 | (d) S&F of new bottom made of 18 mm thick prelaminated MDF board exterior grade of shade as approved by GE including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 109 | (e) S&F new sides made of 18 mm thick prelaminated MDF board exterior grade of shade as approved by GEincluding dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 110 | Table Dressing Ladies with Mirror Drg No. FD-251 |
| 111 | (a) S&F of new looking mirror with frame of 5 mm thick of appropriate size with frame along with 6 mm thick commercial plywood back of the mirror and minor repairs including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 112 | (b) S&F of new drawer made of 12 mm thick commercial plywood and front side made of 18 mm thick pre-laminated MDF board one side laminated finish and provision of knob including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 113 | Table Bed Side Drg No. FD-276 |
| 114 | (a) S&F of top made of 18 mm thick pre-laminated MDF board one side laminated finish duly providing 4 mm thick teak wood beading all around including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 115 | (b) S&F of side made of 18 mm thick particle board one side laminated finish including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 116 | (c) S&F of new back made of 6 mm thick plywood commercial type including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 117 | Hat Stand Drg No. FD-233 |
| 118 | (a) S&F of teak ply of appropriate thickness as per drawing to make front side including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 119 | (b) S&F new back ply made of 6mm thick plywood including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 120 | (c) S&F of new wooden frame including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 121 | (d) S&F of brass pegs including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 122 | (e) S&F of 5 mm thick looking mirror with edging including dismantling of old unserviceable one complete all as specified, directed and as shown on drawings. |
| 123 | Notes applicable to Sl item Nos 21.01 to 21.19 :-(a) M & L for melamine polish with spray machine after removing of existing polish of any description by scrapping and smothening of surface wherever required or as directed by Engr-in-Charge to the following furniture articles all are of MES pattern viz F/DB/FD/MAP series or each items including applying wax for depressed surface as well as washing with caustic soda wherever required before polishing with primer one cote of sall as specified and as directed by Engr-in-Charge. (b) Work will be executed where the furniture exist in different User Units at OTM/MD Accns under the jurisdiction of GE (East) Bareilly including BSO's Furniture Yard as directed by Engr-in-Charge. |
| 124 | Chair Dinning Cushioned Drg No. FD/E6/MAP/10 |
| 125 | Chair Dining Drg No. FD-279 |
| 126 | Sofa Set 04 Seater Drg No. FD/MAP-II/02, FD-281 |
| 127 | Sofa Set 05 Seater Drg No. FD/MAP-II/02, FD-373 |
| 128 | Chair Easy Drg No. FD-229 |
| 129 | Chair Writing Drg No. FD-202, FD-280 |
| 130 | Bedhard Plywood Top Drg No. FD-245, FD-246, FD-247 |
| 131 | Table Centre Drg No. FD-274 |
| 132 | Table Centre Drg No. FD-375 |
| 133 | Table Dinning 1200x900mm |
| 134 | Table Dinning for 06 Persons Drg No. FD-30(M), FD-273 |
| 135 | Teapoy Drg No. FD-232, FD-278, FD-382 |
| 136 | Table 3'x2' with/without Drawer Drg No. FD-283, FD-284 |
| 137 | Table Peg Drg No. FD- 277, FD-384 |
| 138 | Side Board Drg No. FD-372,FD/E6/MAP/09 |
| 139 | Table Dressing Gents with Mirror Drg No. FD-230, FD-379 |
| 140 | Table Dressing Ladies with Mirror Drg No. FD-251 |
| 141 | Table Bed Side Drg No. FD-276 |
| 142 | Hat Stand Drg No. FD-233 Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender