Tender For Repair To Flooring, Plastering, False Ceiling, Wall Panelling, Joinery And Sanitary Fittings For Zone D At Lgj Mil Stn Under Ge Lalgarh Jattan
Tender Value
50 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
17 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Flooring, Plastering, False Ceiling, Wall Panelling, Joinery And Sanitary Fittings For Zone D At Lgj Mil Stn Under Ge Lalgarh Jattan
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water all as directed |
| 2 | Providing and applying factory manufactured ready-mix cement plaster (polymer modified dry mortar) of average thickness 15 mm on internal / external brick or 5mm on ceiling concrete surface, including surface preparation, hacking of RCC surface, raking of joints of brick masonry, cleaning, wetting, scaffolding, applying plaster in two coats, finishing smooth with trowel, curing for minimum 7 days complete in all respects as directed by Engineer-in-Charge.The rate shall include cost of all materials, labour, water, tools & plants, mixing with potable water only, transportation, loading-unloading and all incidental charges complete.Note : 1. The ready-mix plaster shall be factory manufactured dry mortar produced by an approved reputed manufacturer having ISO certification (ISO 9001 Quality Management).2. Material shall be supplied in original sealed manufacturer packing with batch number, date of manufacturing, shelf life and technical specifications clearly printed on each bag.3. The plaster material shall conform to relevant Indian Standards: (i) IS 1661 (Cement plaster application) (ii) IS 2645 (Integral waterproofing compounds, where applicable) (iii) IS 4031 (Test for cement properties)4. The contractor shall submit the following before use at site: (i) Manufacturer’s test certificate (ii) Product technical data sheet (TDS) (iii) Method statement for application5. No hand-mix proportioning of cement and sand will be permitted in place of ready-mix plaster.6. Each lot of material brought to site shall be subject to approval by Engineer-in-Charge before application.7. Bags older than 3 months from date of manufacture or damaged / moisture affected bags shall be rejected and immediately removed from site.8. The contractor shall store the material: (i) In dry covered shed (ii) On wooden planks (minimum 150 mm above ground) (iii) Away from water, dampness and direct sunlight |
| 3 | 9. Water used for mixing shall be clean potable water only. Use of bore well saline water / contaminated water is strictly prohibited.10. Mixing shall be done only as per manufacturer recommendation using mechanical mixer or pan mixer.11. Hand mixing on floor shall not be allowed. (i) Surface preparation: (ii) Brick joints shall be raked 10 mm deep (iii) RCC surface shall be hacked or bonding agent applied (iv) Surface must be cleaned and pre-wetted before plaster12. The plaster shall be applied in recommended thickness (generally 10–15 mm).Over-thick single coat application shall not be permitted.13. Proper curing shall be carried out for minimum 7 days after application.14. The contractor shall provide manufacturer’s guarantee / warranty certificate (minimum 5 years against debonding and cracks) wherever applicable.15. Any crack, peeling, hollowness or debonding observed during defect liability period shall be rectified by the contractor at his own cost including removal and re-plastering.16. Engineer-in-Charge reserves the right to: (i) Draw random samples from site (ii) Send for laboratory testing (iii) Reject the material if found sub-standard17. Measurement shall be taken for finished plastered surface only. No extra payment for wastage, thickness variation, scaffolding, curing or surface preparation shall be admissible.18. The material shall be of any one of the following approved makes or equivalent approved: Ultratech Readiplast / JK WallMaxX / Magicrete Ready-Mix Plaster / Weber Saint-Gobain / Birla Aeroco |
| 4 | M&L for preparation by suraface with help of mechanicallly and applying 1.5 to 2.5 mm thick acrylic wall care putty and smoothening the surfaces with sand paper/mechanised sanding etc (preparatary paint as directed), and applying two coat of 100% premium intetrior acrylic emulsion paint by using brush roller over and including one coat of primer complete all as specified & directed by Engr-in-charge. |
| 5 | M&L for applying two coat of weather proof exterior emulsion paint (shade as approved by GE) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers/balcony etc surfaces over wall care putty (thickness very from 1.5 to 2.5 mm as required for desirable smoothness and levelling of surfaces in two or more layers) on newly plastered surfaces of wall including preparation of surface complete all as specified & directed by Engr-in-charge. |
| 6 | M&L for applying two coats of white wash on new plastered surface as on ceiling incl preparation etc. complete all as specified & directed by Engr-in-charge. |
| 7 | M&L for complete removal of existing treament with help of mechanicallly and applying 1.5 to 2.5 mm thick acrylic wall care putty and smoothening the surfaces with sand paper/mechanised sanding etc (preparatary paint as directed), and applying two coat of 100% premium intetrior acrylic emulsion paint by using brush roller complete all as specified & directed by Engr-in-charge. |
| 8 | M&L for complete removal of existing surface finishes and treating with two coat of weather proof exterior emulsion paint (shade as approved by GE) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers/balcony etc surfaces over wall care putty (thickness very from 1.5 to 2.5 mm as required for desirable smoothness and levelling of surfaces in two or more layers) on old plastered surfaces of wall including preparation of surface complete all as specified & directed by Engr-in-charge. |
| 9 | M&L for preparation of old plastered surfaces and appying two coats of white eash on ceiling complete all as specified & directed by Engr-in-charge. |
| 10 | Dismantling of existing Kota Stone Flooring including careful removal of slabs without undue breakage, cleaning of adhered mortar from underside, sorting of serviceable and unserviceable slabs, stacking of serviceable materials at site as directed, and disposal of unserviceable materials outside Defence land up to 50 m lead complete all as specified and directed by Engineer-in-Charge. |
| 11 | M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid over cement screed base laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match shade of the slab including rubbing and plishing complete all as directed. |
| 12 | M&L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick backing coat in factory manufactured ready-mix cement mortar (polymer modified dry mortar) set and jointed in neat cement slurry mixed with pigment to match shade of the slab including rubbing and plishing complete all as specified & directed by Engr-in-charge. |
| 13 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in factory manufactured ready-mix cement mortar (polymer modified dry mortar) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick screed bed in factory manufactured ready-mix cement mortar (polymer modified dry mortar) complete all as specified and directed. |
| 14 | Rounding off edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed |
| 15 | M & L for Mirror polishing on exiting marble/granite/Kota stone/Stone work where ever required to give high gloss finish complete all as specified and as directed by engineer-in-Charge. |
| 16 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed by Engr-in-charge. |
| 17 | Material and labour for brick work with Fly Ash bricks (old size) straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge. |
| 18 | Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 19 | Providing and fixing premium quality WPC fluted wall panels of approved make, manufactured from wood polymer composite (WPC) material, having uniform fluted (grooved) surface texture, of size as per manufacturer’s standard (generally 150–200 mm width and up to 2.4–3.0 m length), and thickness not less than 25 mm , Panels shall be fixed using a combination of concealed clips, stainless steel screws, and high-strength adhesive, ensuring proper interlocking through tongue-and-groove system, maintaining uniform alignment, level, and plumb. The panels shall be of high-density, UV-stabilized, waterproof, termite-resistant, borer-proof and fire-retardant grade, with factory-finished surface such as wood grain / matte / laminated finish of approved shade and pattern.The work includes:Cutting panels to required size and shapeFixing panels in true line, level, and alignmentProper jointing with tongue & groove interlocking systemProviding uniform grooves/flutes without visible defectsMaking necessary cut-outs for electrical boxes, AC points, etc.Providing and fixing matching edge trims, corner profiles, end caps in WPC/PVC/aluminium as requiredFilling minor gaps and finishing edges neatlyCleaning and finishing complete surface after installationComplete all as specified and as directed by Engineer-in-Charge. |
| 20 | MeasurementThe item shall be measured in square metres (Sqm) of finished surface area of WPC fluted panelling.💰 Rate shall includeSupply of premium WPC fluted panelsAll cutting, wastage, and handlingAll fixing accessories (clips, screws, adhesives, etc.)Edge trims, corner profiles, and finishing accessoriesLabour, scaffolding, tools & plantsMaking cut-outs and finishingComplete installation in all respects |
| 21 | Providing and fixing anodised aluminium snap grid frame work for false ceiling including suspension system with galvanized steel wire, complete, and laying 10 mm thick PVC insulation panels with EPS backing stuck to 1 mm thick plain PVC sheet, suitably placed in false ceiling grid made of Aluminium sections, including all fixtures, fasteners, cutting, wastage, levelling and finishing as per specification and drawing, complete all as specified and directed by Engineer-in- charge. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified & directed by Engr-in-charge. |
| 23 | M&L joint free Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. Set & jointed in neat cement slurry & jointed in coloured cement to match the colour of tiles over & including 20 mm thick screed bed in cm 1:4 with adhesive applied on the prepared surface as well as on the backside of each tile (double bonding/back buttering method) to ensure full contact and void-free fixing, complete. and pointed in epoxy grout to match in floor complete all as specified & directed by Engr-in-charge. |
| 24 | M&L joint free Virified ceramic tiles light shade10mm thick (square / rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. Set & jointed in neat cement slurry & jointed in coloured cement to match the colour of tiles over & including 20 mm thick screed bed in cm 1:4 with adhesive applied on the prepared surface as well as on the backside of each tile (double bonding/back buttering method) to ensure full contact and void-free fixing, complete. and pointed in epoxy grout to match in floor complete all as specified & directed by Engr-in-charge. |
| 25 | Ditto all as per Item no 22.00 here in before, on vertical surfaces such as skirtings ,set & jointed in neat and pointed in epoxy grout to match the floor tiles, over & including 10 mm thick screed in cement mortar (1:4) with adhesive applied on the prepared surface as well as on the backside of each tile (double bonding/back buttering method) to ensure full contact and void-free fixing, complete. complete all as specified & directed by Engr-in-charge. |
| 26 | M&L joint free Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. Set & jointed in neat cement slurry & jointed in coloured cement to match the colour of tiles over & including 20 mm thick screed bed in cm 1:4 and pointed in epoxy grout to match in floor complete all as specified & directed by Engr-in-charge. |
| 27 | M&L coloured Glazed ceramic tiles of size 450x300mmx7mm thick on verticle surface such as skriting/dados over and incluiding 10 mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified & directed by Engr-in-charge. |
| 28 | Taking down chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified & directed by Engr-in-charge. |
| 29 | Taking down chowkhats or frames exc 1.5 sq. m but n.exc 4.0 sq. m each with shutters (without taking off shutters from the frame) complete all as specified & directed by Engr-in-charge. |
| 30 | S&F powder coated aluminium frame/shutter for doors, windows, ventiators with one or more rebates including jointing ceats for fixing with powder coating on aluminium sections, minimum thickness of powder coating shall be 50 micron as per the specification, complete all as specified & directed by Engr-in-charge. |
| 31 | S&F Powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m (min thick 1.50 to 1.80 mm including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges (3 Nos), mortaice lock (01 No), tower bolt (02) anodised aluminum snap beading screws etc.minimum thickness of powder coating shall be 50 micron as per the specification, complete all as specified & directed by Engr-in-charge. |
| 32 | S&F Powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m (min thick 1.50 to 1.80 mm ) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) in each window shutter and necessary accessary as required complete all as specified & directed by Engr-in-charge.. (Note:- Glass will measured and paid separately) |
| 33 | S & F 4.80 mm thick plain type sheet glass glazing to aluminium door and the like in square n. exc. 0.50 sqm in each pane complete all as specified & directed by Engr-in-charge. |
| 34 | S&F 4 mm thick ordinary quality sheet glass and glazing with oil putty in square n. exec 0.5 Sqm in each pane complete all as specified & directed by Engr-in-charge. |
| 35 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVCmulti-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.The item also includes providing and fixing clear / frosted glass of approved thickness. |
| 36 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profiledimension in higher side shall be accepted but no extra payment on this account shall be made.The item also includes providing and fixing clear / frosted glass of approved thickness. |
| 37 | Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 150 mm one or more rebates comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed by Engr-in-charge.Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 38 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified & directed by Engr-in-charge.Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 39 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed by Engr-in-charge. |
| 40 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) Glazed/Gauged Skelton door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed by Engr-in-charge. |
| 41 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed by Engr-in-charge. |
| 42 | S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised stainless steel hinge pin, type B-21 complete all as specified & directed by Engr-in-charge. |
| 43 | S & F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified & directed by Engr-in-charge. |
| 44 | S & F 150 mm long Aluminum anodised bow handle fabricated type extruded section complete all as specified & directed by Engr-in-charge. |
| 45 | S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed by Engr-in-charge. |
| 46 | S & F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 47 | S&F in repair 4 mm thick figured glass pin head type and glazing with oil putty in square n. exec 0.5 Sqm in each pane including taking hacking out old broken glass from metal frame complete all as specified & directed by Engr-in-charge. |
| 48 | S&F in repair Providing and fixing 3mm thick transparent PVC sheet in lieu of glass panes in existing steel/aluminium/wooden window frames including cutting to required size and shape, fixing with necessary beading, rubber gasket or aluminium clips, screws, nails etc., and sealing the joints with approved grade transparent sealant to make it watertight. The sheet shall be of first quality, UV resistant, fire-retardant, clear transparent type (of approved make such as Sintex / Jain / Supreme / Polycarbonate equivalent). The rate shall include cost of all materials, labour, tools & plants, and all operations required for complete installation including taking hacking out old broken glass from metal frame all as specified and directed by Engineer-in-Charge. |
| 49 | S&F in repair Stainless Steel curtain roads, standard quality, not less than 19/25 mm dia with heads, wall thickness of pipe not less than 20 guage, including fancy type brackets and decorated end knobs (finals), stop roller etc, fixed on wall for doors and windows curtains, cutting as required length and fixing at site including fixing arrangements, rawl pluig, screws etc (size and dia of rods are directed by Engr-in-charge ) including taking out old any type rod or pelmet boxes with curtain rod complete all as specified & directed by Engr-in-charge. |
| 50 | S&F in repairs vitreous china wash hand basin coloured flat back size 550 x400 mm, long screwed shank fly nut flange end including cutting for and pinning in ends for brackets in 1:3 CM, including 32 mm dia chromium plated waste coupling/trap and waste pipe complete all as specified & directed by Engr-in-charge. |
| 51 | S&F in repairs vitrous china squatting pan of size 580 x 440 mm (Orrisa pattern), white with integral foot rest (excluding flushing cistern & flush pipe) including cast iron 'P' or 'S' trap and connection to trap antisyphonage pipe and making good to floor complete all as specified & directed by Engr-in-charge. |
| 52 | S & F in repair vitreous china wash down water closet pan (Pedestal pattern) white EWC floor or wall hung type with PVC seat cover including fixing bolts and making connection to flushing cistern, including 100mm dia trap etc and flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified & directed by Engr-in-charge. |
| 53 | S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle and telescopic pipe and connection to pipe including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified & directed by Engr-in-charge. |
| 54 | S&F in repair vitreous china urinal flat back of size 465X355X265 mm white (minimum), with grating & union for discharge pipe including chromium plated spreader for fixing with 15 mm dia pipe (minium weight 60 grms) but including flushing cistern, flush pipe & waste pipe but fixing only automatic flushing cistern with bracket flush pipe etc complete including providing and fixing plungs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, complete all as specified & directed by Engr-in-charge. |
| 55 | S&F in repair swan neck type pillar tap, fancy type, cast copper alloy chromium plated with capston head, screwed down high pressure with or without lettered with long screwed shank and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified & directed by Engr-in-charge.Wt not less than 450gms complete all as specified and directed by Engineer-in- charge |
| 56 | S & F 32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified & directed by Engr-in-charge. |
| 57 | S&F in repair long bib taps 15mm bore cast coper alloy CP long body fancy type, with capston head and cup screwed down, hand operated, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engr-in-charge. |
| 58 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified & directed by Engr-in-charge. |
| 59 | S & F in repair 15 mm dia stop/ Angle valve fancy type, cast copper alloy chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as specified & directed by Engr-in-charge. |
| 60 | S&F in repair, chromium plated shower rose, 125mm size, brass chromium plated with sweivel joint complete all as specified & directed by Engr-in-charge. |
| 61 | Dismantling water tank of capacity Exc 250 litres and not exc 500 litres and removing from site and S&F 500 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position incl 20 mm bore PTMT float valve,connecting 2 Nos nipple/ sockets etc complete all as specified & directed by Engr-in-charge. |
| 62 | Dismantling water tank of capacity Exc 500 litres and not exc 1000 litres and removing from site and S&F 1000 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position incl 20 mm bore PTMT float valve,connecting 2 Nos nipple/ sockets etc complete all as specified & directed by Engr-in-charge. |
| 63 | S&F in repair looking mirror 600 x 450mm of selected quality glass mounted on 6mm commercial ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws complete all as specified & directed by Engr-in-charge. |
| 64 | S&F aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified & directed by Engr-in-charge. |
| 65 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed by Engr-in-charge. |
| 66 | S&F Supplying and laying of 20 mm (outer dia) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down steel tubing and connection complete all as specified & directed by Engr-in-charge. |
| 67 | S&F Supplying and laying of 25 mm (outer dia) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down steel tubing and connection complete all as specified & directed by Engr-in-charge. |
| 68 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to Store (measured overalll as fixed along the cente line over fittings and accessories) complete all as specified & directed by Engr-in-charge. |
| 69 | S&F 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls complete all as specified & directed by Engr-in-charge. |
| 70 | S&F 75 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls complete all as specified & directed by Engr-in-charge. |
| 71 | S & F 110mm dia PVC (SWR) bends |
| 72 | S & F 75 mm dia PVC (SWR) bends |
| 73 | S&F PVC (SWR) in repair floor trap of 75 mm dia outlet plain with grating including CP grating jointing with solvent cement complete all as specified & directed by Engr-in-charge. |
| 74 | Demolition of cement concrete of any description ( unreinforcement concrete) and in any position not otherwise specifically provided for complete all as specified & directed by Engr-in-charge. |
| 75 | M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mk wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumin & sand mixture complete all as specified & directed by Engr-in-charge. |
| 76 | M&L for 75 mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors all specified and directed. |
| 77 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compa ction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engr-in-charge. |
| 78 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engineer-in- charge |
| 79 | M&L for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as filling of sunken floors/bottom and side of drain complete all as specified & directed by Engr-in-charge. |
| 80 | M&L for water proofing treatment to RCC sunken slab (not exceeding 45 cm depth of sunken) as specified below complete all as specified and directed by Engineer-in-Charge.(a) Applying 15 mm plaster in CM 1:3 with WPC on raised verticle surface.(b) Cleaning the surface with wire brush/coir brush, removing loose marterial like dust particle, dirt etc.(c) Creating fillet coving of 50x50 mm with polymer modified mortar on the junction of slab and walls.(d) Apply first coat of two component modified polymer coating on the horizontal and verticle surface.(e) Laying of glass fiber mesh size of 2 mm x 2 mm immediately on above coating.(f) Apply second coat of two component modified polymer coating after 72 hrs.(g) Cement concrete 1:4:8 over the coating as per requirement (h) Joining the sanitary pipes with the water proofing tape having bridging ability of more than 1.5 mm(j) Filling the gap between the wall opening and sanitary pipe with non shrink cementatious grout complete as specified.(k) Fixing 40 mm dia PVC pipe 450 mm long bottom of the sunken and warping of bath seal tape on the pipes insearted through walls to floor and seal it.Make:- Dr. Fixit/Fosroc/STP/Asianpaints.Note:- 1. The tretament shell be carried out by approved authorised applicator approved by GE as per manufacturer instructions and as directed by Engineer-in-charge.2. PCC filling in sunken portion will be measured seperately. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender