Tender For Repair To Plastering, Brickwork, Flooring, Plumbing, Sanitary Fittings, Joinery, Att, Wpt Sheet, Ceiling, Walling, Periodical Services And Certain Misc Repair Etc To Otm Accn At Bmc Under Ge (C) Kolkata
Tender Value
39.96 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
19 days left
EMD
79920
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Plastering, Brickwork, Flooring, Plumbing, Sanitary Fittings, Joinery, Att, Wpt Sheet, Ceiling, Walling, Periodical Services And Certain Misc Repair Etc To Otm Accn At Bmc Under Ge (C) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE ( C ) KOLKATA Name of Work: REPAIR TO PLASTERING, BRICKWORK, FLOORING, PLUMBING, SANITARY FITTINGS, JOINERY, ATT, WPT SHEET, CEILING, WALLING, PERIODICAL SERVICES AND CERTAIN MISC REPAIR ETC TO OTM ACCN AT BMC UNDER GE (C) KOLKATA Contract No: GE (C )/KOL/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # ItemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Demolition of brick work or stone masonary built in cement mortor including all quoins & jambs etc. complete all as specified and directed |
| 3 | Taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc upto complete all as specified and directed |
| 4 | Taking down existing roof membrane with concrete padding upto original roof and removing the debris from the site etc complete all as specified and directed |
| 5 | Demolition of cement concrete (Un-reinforced) on roofs, floors (other than ground floor) berms, staircase, landing, chajjas and similar suspended work complete all as specified and directed |
| 6 | Demolition of stone slabs and tiles of any description or thickness in floor, aprons etc laid bedded and pointed in mortar complete all as specified and directed |
| 7 | Taking down old crumple treatment (sheet, filler board etc) and remoing the debris from the site complete all as specified and directed |
| 8 | Dismentalling floors hearth or wall tilling including cement mortor bedding (but not backing) removing serviceble tiles to store and rubbish off the premises complete all as specified and directed |
| 9 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as directed and directed |
| 10 | Taking down chowkhats or frames with shutters (without taking off shutter from frames) of sizes nexc 1.5 Sqm complete all as specified and directed. |
| 11 | All as item No. 9.00 above but exc 1.5 Sqm and nexc 4.0 Sqm each. |
| 12 | Taking down of shutters of any description nexc 1.0 Sqm each complete all as specified and directed |
| 13 | Taking down of shutters of any description nexc 1.0 Sqm and nexc 2.0 Sqm each complete all as specified and directed. |
| 14 | Taking up or down steel tubing 15mm dia and connection complete all as specified and directed Note: including cleaning for re-fixing or remove to stores. |
| 15 | Taking up or down steel tubing 20mm dia and connection complete all as specified and directed Note: including cleaning for re-fixing or remove to stores. |
| 16 | Dismantalling of GI (corrugated, semi corrugated and plain) sheet in roof covering incl ridges complete all as specified and directed |
| 17 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in crumple joint section fixed with brass screw complete all as specified and directed. |
| 18 | M&L for bituminious filler board 50mm thick as in filler material of crumple section complete all as specified and directed |
| 19 | M&L for 15mm deep 100% silicon based sealent (Latisil from M/s Laticrete or equivalent product from M/s Pidilite) from crumple joint (40 to 75mm wide) treatment complete all as per manufacturer's instruction and as directed |
| 20 | Carefully chipping of damaged, detoriorated, spalled, debinded and weak concrete from the beams columns wall, roof of staging structure at all height including removal of rubbish upto a lead of 50 meter as per direction of Engr-in-Charge |
| 21 | Removing rust from existing corroded reinforcement by mean of application of rust remover such as Hind Rust Clean (M/s Hindcon) or equivalent from M/s pidilite / forsoc and then washing the same to make the reinforecement scale free as per the direction of Engineer-in-Charge |
| 22 | Application of anticorrosive paint such as Hind Anti Rust (M/s Hindcon) or equivalent from M/s Pidilite/Forsoc on cleaned reinforecement as per manufacturer's specification complete including labour and material as per direction of Engieer-in-chargeNote : Payment not be made on 25% exposed area |
| 23 | Application of bonding coat based on polymer modified cementious material such as Nitobond SBR/Hind Styrene BR (M/s Hindcon) or equivalent from M/s Pidilite /Forsoc @ 0.50 KG/Sqm (due to rough concrete surface) to act as bonding agent between old and new concrete including material and labour as per manufacturer's specification and directed by Engr-in-Charge |
| 24 | Application of polymer modified concrete with mix ration 1:1:5:3 of 10mm nominal size admixed with acrylic latex polymer such as Hind Styrene BR/Nitobond SBR (M/s Hindcon) or equivalent from M/s Pidilite/Forsoc @2.00 Kg per Sqm and plasticiser Hind Plast Super/Conplast SP 337 (M/s Hindcon) or equivalent from M/s Pidilite/Forsoc @ 100Gms sqm for an average thickness of 50mm (the concrete to be applied when the bonding coat is still green) including material labour, scaffolding and formwork etc as per manufacturer's specification and direction of Engineer-in-Charge |
| 25 | M&L plain cement concrete (1:2:4) type B-0 (Using 12.50mm graded stone aggregate) as in padding and benching & filleting all as specified and directed. |
| 26 | M&L for 10mm thick screed bed or bedding over roof surfaces when concrete is still green with and including WPC in cement mortar 1:3 complete all as specified and directedNote :- WPC shall be measured paid separately |
| 27 | Preparation of plastered surfaces of roof and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt laying over a coat of bituminous primer @ 0.40 Ltr / Sqm complete all as specified and directed. The membrane shall be laid using butane torch and sealing all joints etc all as specified and directed. |
| 28 | M&L for 25mm thick PCC tiles of size 250x250x25mm set and jointed and pointed in neat cement slurry over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 29 | M&L brick work using fly ash bricks pulverized class designtion 75 (kgf/cm2) old size bricks straigth or curved on plan exc 6m mean radius built in CM (1:6) cmplete all as specified and directed. |
| 30 | All as item No 28.00 here in before but half brick thick brickwork built in CM 1:4 complete all as specified and directed |
| 31 | M&L for applying polymer modified cement mortar rendering 20mm thick in CM 1:3 on wall duly mixing polymer modifier \\"Nitobond SBR of M/s Forsoc Chemical India (Pvt) Ltd\\" or \\"Hind Styrene BR of Hindcon Chemical Ltd\\" or equivalent of M/s Pidilite Industries /Icannano @ 7 Litre per bag of cement complete finished even and smooth without using extra cement complete upto 4 storey height all as specified and as per manufacturer's specification. |
| 32 | M&L Cutting out existing cracks is concrete surfaces forming grooves of 25mm x 40mm size, cleaning the groove thoroughly with bower, applying primer coat of the mix of IPH CC Resin & Hardner in equal proportion with suitable brush to form a film on the surface of groove, filling the groove with putty made by mixing IPH CC Resin, hardner and admixture in the proportion of 1:1:4 and finally applying the sealing coat of the same mix and in the manner primer coat is applied with following min. coverage per running metre length of groove:- Material Primary Coat Putty Filling Seal Coat Resin 60 Gms 100 Gms 40 Gms Hardner 60 Gms 100 Gms 40 Gms Admixture - 400 Gms - |
| 33 | M&L rendering 15mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & smooth without using extra cement complete all as specified and directed |
| 34 | M&L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished the surfaces even and fair using water proofing compound as per manufacturer instruction complete all as specified and as directed.Note : WPC shall be measured and paid separately |
| 35 | M&L rendering 5mm thick in CM (1:3) as in ceiling surfaces even & smooth without using extra cement complete all as specified and directed |
| 36 | Supply only liquid water proofing compound as required |
| 37 | M&L Cutting chase, pinning in making good to facing where required and pointing in CM 1:3 to end or edges of landing steps, cills, sunshades, shelves, lintels etc. and cutting chase for conceled water pipe etc. and making good cutting not exc 10Cm girth complete all as specified and directed. |
| 38 | Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor, slabs, landings, chajja and similar work not exceeding 200mm thick for rough finished surfaces (Horizontal or slooping). |
| 39 | M&L for marble (Makrana white) work 18 to 20mm thick (table rubbed and polished) in border of kota stone flooring and like with and including 20mm thick screed base in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shades complete all as specified and directed |
| 40 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone agg as in bed blocks for hold fast complete all as specified and directed |
| 41 | S & F in repair for brass chromium plated long body bib cock with Wall Flange for 15 mm bore pipe complete all as specified and directed. |
| 42 | S & F in repair for brass chromium plated two in one tap with Wall Flange screwed for 15 mm bore pipe complete all as specified and directed |
| 43 | S & F in repair for brass chromium plated Pillar Tap screwed for 15 mm bore pipe complete all as specified and directed |
| 44 | S & F in repair ABS body chrome plated shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed |
| 45 | S & F in repair for shower arm 240mm long round shape with flage including fixing to steel pipe or union complete all as specified and directed |
| 46 | S & F in repair for 15mm bore brass chromium plated Angular Valve with Wall Flange complete all as specified and directed. |
| 47 | S & F in repair for 15mm bore brass chromium plated 2 Way Angular Valve with Wall Flange complete all as specified and directed. |
| 48 | S & F in repair for chromium plated Health faucet with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) |
| 49 | M&L Preparing old surfaces of internal walls and applying one coats of white wash, complete all specified and directed. |
| 50 | M&L preparing newly plastered surfaces and applying 2 coat of Acrilyc Washable distemper over a coat of primer including a coat of white cement based putty (approx 1.5mm thick) complete all as specified and directed. |
| 51 | M&L preparing new plastered surfaces of ceiling surface and applying Two coat of Acrilyc Washable distemper over a coat of primer including a coat of white cement based putty (approx 1.5mm thick) complete all as specified and directed. |
| 52 | M&L preparing old decorated surfaces and applying one coat of Acrilyc Washable distemper complete all as specified and directed. |
| 53 | M&L preparing old decorated ceiling surfaces and applying one coat of Acrilyc Washable distemper complete all as specified and directed. |
| 54 | M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including scaffolding complete all as specified & directed. |
| 55 | M&L complete removal of old decorated surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: Old work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified & directed. |
| 56 | M&L preparing old decorated surfaces and Finishing walls with one coat of Acrylic Smooth exterior paint of required shade including scaffolding complete all as specified & directed. |
| 57 | M&L preparing old plastered surface and apply one coat of cement based paint complete all as specified and directed |
| 58 | S & F in repair for Plastic water closet seat, in white colour as directed closed pattern with flat/recessed bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and colour as directed. |
| 59 | S&F in repair vitreous China squatting pan, 'orissa pattern', size 580x440mm white, with intregal foot rest including P or S trap and connection to trap and flushing pipe, anti-syphonage pipe, gully trap 150x150mm etc and including lime concrete bedding complete all as specified. |
| 60 | M&L double charged light shade vitrefied 10mm thick (square/rectangular) area of each tile upto and including 0.36 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 61 | All as item No 59 herein before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed |
| 62 | M&L joint free non skid ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 63 | All as item No 61 herein before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed |
| 64 | M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 65 | All as item No 63 herein before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed |
| 66 | M&L Joint Free Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqm in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortar complete all as specified and as directed. |
| 67 | S&F in repair vitreous china wash hand basin white of size 550 x 400mm excluding taps but including 32mm PTMT waste coupling (excluding 32mm waste pipe) complete all as specified and directed. |
| 68 | M&L glazed ceramic coloured tiles 200x300x6-7mm in vertical surfaces set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed |
| 69 | M&L glazed ceramic coloured tiles 450x300x6-7mm in vertical surfaces set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed |
| 70 | S&F Machine cut kota stone slab flooring 18-20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite finish polishing complete over and including 20mm thick cement mortar (1:6) screed bed complete all as specified and as directed. |
| 71 | All item as here in before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed |
| 72 | M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection laid in panels, finish the top surfaces even and smooth without using extra cement complete all as specified and directedNote:- Construction joints will be provided at interval of 2.5m length and filled with bitumen 80/20 mix with sand in ratio of 1:3 and cost of the same shall be deemed included in quoted rate |
| 73 | M&L 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in base of floor complete all as specified. |
| 74 | M and L 16-18mm thick granite of any type tiles machine cut in skirting dado laid over and including cement screed bed 15mmthick in CM 1:6 bedded and pointed with grey cement slurry and jointed with white cement CM (1:2) using marble dust with admixture to match with shade of granite complete all as Specified and directed |
| 75 | M&L RCC (Nominal Mix) 1:1.5:3 type A-1 (Using 20mm graded stone aggreagate) as in slab, shelves, Chajja supported on walls beam & coloumns in floor roof including balconies, conopies, deck slabs & shelves complete all as specified and directed. |
| 76 | M&L for Pressed steel frames for doors with one or more rebates size of frame 105 x 60 mm including necessary fixing lugs,hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.Note:- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate |
| 77 | M&L for Pressed steel for doors with one or more rebates size of frame 125 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.Note:- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate |
| 78 | S&F in repair vitreous china wash hand basin white of size 550 x 400mm excluding taps but including 32mm PTMT waste coupling (excluding 32mm waste pipe) complete all as specified and directed. |
| 79 | S&F in repair vitreous china squatting pan orrissa pattern size 580x440mm white with intregal foot rest including connection to trap, and flusing pipe, anti-syphonage pipe, etc and including lime concrete bedding complete all as specified. |
| 80 | S&F in repair PVC flusing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as directed. |
| 81 | S&F in repair PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and directed |
| 82 | S&F for 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as specified in SSR Part-I 2009. |
| 83 | S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to cowkhats complete all as specified and directed |
| 84 | Providing and fixing factory made uPVC white colour sliding window (Area of each window not exceeding 2.00 sqm) Three track made of extrueded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52 mm), sliding sash (42mm x 67mm). Sliding mesh sash (42mmx57mm) Sliding interlock (one vertical length in each shutters) (45.5mmx28mm), Glazing bead (24.5mmx16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 (+-0.2mm) thick galvanised steel fr Frame (30mmx18mm) 2 Nos, sliding sash (30mmx18mm) , sliding mesh sash (36mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mmx 100mm long fasteners, hardware (Touch Lock of Zinc alloyed (white powder coated), steel roller system. including S&F 4.8mm thick tinted glass (pin headed) and Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and required accessories complete all as specified and directed. |
| 85 | M&L 1.50mm thick power coated aluminium , three track sliding window with three nos shutters made of aluminium section as per drawing no CWE/KOL/TD-33 of section no 1F-1F including necessary jointing cleats, glazing clips, rubber neoprene packing, roller, locking arrangement, handles 2 Nos , anodised aluminium snap beading screws etc. Including S&F 4.8mm thick tinted glass and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm. Complete all as specified and as directed.Note Nos :- (i) All window member including fitting & fixture i.e frame, track, shutter frame, etc shall be deem to included quoted rate. Only measure opening size of window. |
| 86 | S&F powder coated aluminium ventilators with louvers and glazing including frame of section over all size of window 600x450mm complete with following specification. (a) Alu frames of size 45x45x1.5mm (b) Rail & Stile 45x45x1.5mm thick (c) 4.80mm thick frosted sheet glassNote:- All ventilators/louvers member including fitting & fixture deemed to included in quoted rate. Only measure opening size of ventilators/louvers. |
| 87 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed. |
| 88 | S&F for Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 89 | Hacking out old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified. |
| 90 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 Sqm each pane. |
| 91 | S&F 4mm thick frosted glass panes and glazing with oil putty in square nexc 0.5 Sqm each pane complete all as specified. |
| 92 | S&F 100mm Butt hinges, extruded brass, with brass hinge pin, bright polished, complete all as specified and directed |
| 93 | S&F Aluminium anodised, barrel tower bolts of extruded section 200mm long complete all as specified and directed |
| 94 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of 300mm long complete all as specified and directed |
| 95 | S&F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed |
| 96 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150mm long complete all as specified and directed |
| 97 | M&L 18/19 mm thick Medium density fibre board, exterior grade, fixed to timber framework with screws complete all as specified and directed. |
| 98 | S&F continous (piano) hinge mild steel, bright finish or electro galvanised Width of flaps (When open) 30mm complete all as specified and directed. |
| 99 | S&F, in repair, 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished finished wooden complete all as specified and as directed. |
| 100 | S&F PTMT Ball Valve 15mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed as in repair, complete all as specified and as directed. |
| 101 | S&F PTMT Ball Valve 20mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed as in repair, complete all as specified and as directed. |
| 102 | S&F PTMT Ball Valve 25mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed as in repair, complete all as specified and as directed. |
| 103 | S & F in repair for chromium plated Bib taps for 15 mm bore pipe complete all as specified and directed. |
| 104 | S&F triple layer PVC water storage tank cylindrical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25mm outer diameter for CPVC pipe & making connection for inlet and outlet including dismantle of old water tank and removing from site complete all as specified & directed. |
| 105 | S&F triple layer PVC water storage tank cylindrical, vertical with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25mm outer diameter for CPVC pipe & making connection for inlet and outlet including dismantle of old water tank and removing from site complete all as specified & directed. |
| 106 | S&F, in repair, Bip tap with nozzle 15mm bore standard PTMT any colour screwed for iron pipe and fixed (min weight 15mm-95gms) complete all as specified and directed |
| 107 | S&F, in repair, pillar tap fancy type 15mm bore of PTMT any colour screwed for iron pipe and fixed (min weight 15mm-120gms) complete all as specified and directed |
| 108 | S&F, in repair, Angle stop valve 15mm bore of PTMT any colour screwed for iron pipe and fixed (min weight 15mm-90gms) with PTMT flange complete all as specified and directed |
| 109 | M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 110 | M&L for preparation of new surfaces of Steel and Steel based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of red oxide on steel surfaces complete all as specified. |
| 111 | M&L for preparation of old surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth & applying one coat of synthetic enamel paint complete all as specified. |
| 112 | M&L for preparation of old surfaces of steel or steel based materials of any description and applying one coats of synthetic enamel paint complete all as specified. |
| 113 | S&F in repair for 110mm bore UPVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 114 | S&F in repair for 110mm bore UPVC (SWR) pipes Double socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 115 | S&F in repair PVC (SWR) bend any radius 110mm bore complete all as specified and directed |
| 116 | S&F in repair UPVC (SWR) junction single (single T) equal or unequal 110mm bore complete all as specified and directed. |
| 117 | M&L in repair for diameter of outlet 75mm UPVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. Make-Essco/Marc/Hindware/Parryware or equivalent. |
| 118 | M&L for TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 119 | S&F for 20mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 120 | S&F for 25mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 121 | S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed. |
| 122 | S&F 5mm thick PVC sheet fillet of width 35mm for paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed |
| 123 | M&L for mirrior finished grinding work with machine grinder and polishing of kota stone/Mosic/Stone Slab etc as in as old floor, cooking platform shelf etc complete all as speified and directed Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender