Tender For Repairs To Joinery And Misc Works At Svn Colony, Kep Personnel Qtrs, Site A & Ge Complex Under Age B/R-I Of Ge (Nd) Visakhapatnam
Tender Value
40 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
12 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Joinery And Misc Works At Svn Colony, Kep Personnel Qtrs, Site A & Ge Complex Under Age B/R-I Of Ge (Nd) Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I: B/R WORKS |
| 2 | Taking down shutters of any description n exc 1 sqm each upto 9th floor |
| 3 | Taking down shutters of any description exc 1sqm but n.exc 2 sqm upto 9th floor |
| 4 | Taking down chowkats or frames not exc 1.5 sqm each without taking off shutters from the frame upto 9th floor. |
| 5 | Taking down chowkats or frames exc 1.5 sqm but not exc 4 Sqm each without taking off shutters from the frame upto 9th floor |
| 6 | Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 Sqm each upto 9th floor |
| 7 | Resecuring or easing & adjusting without taking down shutters of any description exc 1sqm but n.exc 2 sqm upto 9th floor |
| 8 | Taking down shutters of any description n. exc 1 sqm each and refixing in same opening upto 9th floor |
| 9 | Taking down shutters of any description exc 1sqm but n.exc 2 sqm each and refixing in same opening upto 9th floor |
| 10 | S&F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 410-0 or Fe-310-O upto 9th floor |
| 11 | M&L for Plain Cement Concrete Type C1 1:3:6 (using 20mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work upto 9th floor |
| 12 | S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints upto 9th floor |
| 13 | S&F 30 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass etc all as per clause 8.24 (b) of SSR Part I 2009 upto 9th floor |
| 14 | S&F 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass etc all as per clause 8.24 (b) of SSR Part I 2009 upto 9th floor |
| 15 | S&F 35mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter with lock rail and panel of 9mm BWP Commercial ply or 12mm veneered particle board with commercial face veneers on both faces all as per clause 8.24 (a) of SSR Part I 2009 upto 9th floor |
| 16 | S&F in repairs factory made solid fixed ventilator of size 50x47mm made out of extruded 5mm thick PVC sheet mitred cut at two corners and joined with 2Nos of 150mm long brakets of 15x15mm MS square tube, the two vertical porfiles are to be reinforced with 19 x 19 mm MS tube and 50% of portion is fixed with 3 mm thick pin headed/frosted glass and remaining portion is covered with wire mesh and 3 mm thick pin headed/frosted glass louvers including 12mm dia MS guard bars and necessary fixtures. |
| 17 | S&F in repair solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing up to 9th floor |
| 18 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width inside upto 9th floor |
| 19 | S&F butt hinges medium weight 100 mm long cold rolled mild steel upto 9th floor |
| 20 | S&F stainless steel butt hinges medium weight 100 mm long for PVC doors upto 9th floor |
| 21 | S&F in repairs butt hinges medium weight 100 mm long cold rolled mild steel upto 9th floor |
| 22 | S&F 75mm long medium weight MS butt hinges upto 9th floor |
| 23 | S&F in repairs 75mm long medium weight MS butt hinges upto 9th floor |
| 24 | S&F 100 mm aluminium anodised barrel tower bolt of extruded section upto 9th floor |
| 25 | S&F in repairs 100 mm aluminium anodised barrel tower bolt of extruded section upto 9th floor |
| 26 | S&F 100 mm aluminium handles, cast type anodised upto 9th floor |
| 27 | S&F in repairs 100 mm aluminium handles, cast type anodised upto 9th floor |
| 28 | S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section upto 9th floor |
| 29 | S & F in repairs 200 mm long Aluminium, anodised, barrel tower bolts of extruded section upto 9th floor |
| 30 | S & F 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy upto 9th floor |
| 31 | S & F in repairs 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy upto 9th floor |
| 32 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised upto 9th floor |
| 33 | S & F in repairs 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised upto 9th floor |
| 34 | S & F Aluminium plate type II Gate and shutter, hook & eye 150 mm size upto 9th floor |
| 35 | S & F in repairs Aluminium plate type II Gate and shutter, hook & eye 150 mm size upto 9th floor |
| 36 | S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor |
| 37 | S&F in repairs 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor |
| 38 | S& F in repairs rubber beading 50 mm wide and 5 mm thick |
| 39 | Carefully removal of existing grill from windows and refix in new window including necessary screws etc upto 9th floor |
| 40 | S&F in repairs aluminium Sliding window / ventilators shutter three track section for frames of weight not less then 1.17 kg/Rm and sliding section for shutter frame all round with aluminium section of weight not less then 0.42 kg /Rm including necessary aluminium fittings and 5.50 mm thick selected quality tinted/plain glass/ SS wire mesh etc complete all as specified and as directed (Rate including taking down old window) |
| 41 | S&F in repairs aluminium openable/sliding door shutter section for frames of weight not less then 1.17 kg/Rm and sliding section for shutter frame all round with aluminium section of weight not less then 0.42 kg /Rm including necessary aluminium fittings and 5.50 mm thick selected quality tinted/plain glass/ SS wire mesh etc complete all as specified and as directed (Rate including taking down old doors) |
| 42 | S & F in repairs Aluminium anodised grill of make \\"Deco grill\\" and DG - 104 model with apperture of size 105 x99 mm, suitable ''F'' or ''E'' section fixed to window/ventilator frame for securing Deco grill and interlock and secruing the frame to masonry wall with brass screws upto 12 th storey complete all as specified and directed. |
| 43 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 44 | S & F framed work such as grills grating, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to FE 290, Gde E-165 complete all as specified and as directed upto 9th floor |
| 45 | S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed upto 9th floor |
| 46 | S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed upto 9th floor |
| 47 | Hacking out old broken glass (any thickness size quality or description) from wooden , steel or aluminium frames glazed with putty or fixed with wooden beads complete all as directed upto 9th floor |
| 48 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares n.exc 0.5 sqm in each pane upto 9th floor |
| 49 | S&F in repairs 20mm dia aluminium curtain rod with brackets etc all as specified and directed |
| 50 | S & F in repairs Powder coated fancy type Stainless Steel curtain rod 25mm dia with suitable SS brackets matching to curtain rod of make as as approved by GE upto 4th storey complete all as specified and as directed. [ Additional supporting bracket shall be provided if length is exceeding 1.2m and rate quoted shall include for the same ] |
| 51 | S&F in repairs Plate racks made out of 0.8 mm thick .stainless steel, of size 750x600x 250 mm all as specified and directed upto 9th floor |
| 52 | S&F door closer hydraulically regulated designation No.2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg of aluminium (Die cast body) in repairs. |
| 53 | S&F for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repaires complete all as specified and as directed. |
| 54 | S & F in repairs 18/19 mm thick ply wood, BWR, exterior grade, commercial type, fixed with screws to timber frame work for built in cupboards, shelves,almirahs etc all as specified and as directed by Engineer in Charge. |
| 55 | S & F in repairs 0.8 to 0.9 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions all as specified and as directed. |
| 56 | S&F Steel cup board shutters Godrej pattern double shutters including frame made of 1 mm thick MS sheet including stiffeners, moulding, bending, welding, necessary fittings and locking arrangement as similar to steel cup board and two coats of spray painting over metal putty including preparation and primer and fixing to the existing concrete wall. (Approximate size of the cup board 90 cm x 190 cm measurement to be made in Sqm incl frame) and all as specified. |
| 57 | S&F Steel cup board shelves Godrej pattern made of 1 mm thick MS sheet including stiffeners, moulding, bending, welding, necessary fittings and two coats of spray painting over metal putty including preparation and primer incl fixing to the existing concrete wall. |
| 58 | Taking down old steel cup board shutter and refixing in same opening after repair with necessary welding, moulding, necessary fittings and locking arrangements all as specified and directed by Engr in charge. |
| 59 | S&F Godrej locks Ultra XL + Twinbolt -1 CK satin nickel - inside and removing old lock and make good of door lock hole with plywood/wood with putty all as per specified and directed. |
| 60 | M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer upto 9th floor |
| 61 | M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer upto 9th floor |
| 62 | Demolition of brick work built in cement mortar all as specified and directed |
| 63 | M&L for brick work with fly ash bricks, straight of curved on plan exc 6M mean radius built in CM 1:6 upto 9th floor complete all as specified |
| 64 | Taking down cement plaster on brick work, racking out joints, hacking for key scrubbing down with water etc complete and removing outside MD land . |
| 65 | M&L for rendering 5mm thick in CM 1:3 on fair faces of ceiling surfaces finished even & smooth without using extra cement upto 9th floor complete all as directed |
| 66 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the top surface even and smooth without using extra cement with necessary safety measures i.e.scaffoldings/hanging platform upto 9th floor complete all as directed |
| 67 | M&L for preparing old plastered or unplastered surfaces by brooming down and applying one coat of white wash on ceiling |
| 68 | M&L for preparing old painted wooden surfaces over 10cm width or girth and applying one coats of synthetic enamel paint all as specified. |
| 69 | M&L for preparing old painted steel surfaces over 10cm width or girth and applying one coats of synthetic enamel paint all as specified. |
| 70 | M & L for Complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of primer with necessary safety measures i.e.scaffoldings/hanging platform upto 12 (twelve) floors complete all as specified and directed. |
| 71 | M&L for Preparing old surfaces of walls by washing rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion upto 9th floor. |
| 72 | M&L for Preparing newly Plastered surfaces of walls and applying two coats of distemper oil emulsion (Oil bound washable distemper) over a Coat of chalk whitening complete all as specified and directed. |
| 73 | M&L for Preparing newly Plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and directed |
| 74 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises out side MD land |
| 75 | M&L for non skid ceramic colour tiles of size 400 x 400 x 7/8 mm thick, as in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including screed bed of 15mm thick in cement mortar 1:6 complete all as specified |
| 76 | M&L for non skid ceramic colour tiles of size 300 x 300 x 7/8 mm thick, as in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including screed bed of 15mm thick in cement mortar 1:6 complete all as specified |
| 77 | M&L for coloured glazed ceramic tiles of size 300 x 450 x 7 to 9 mm thick on vertical surfaces such as skirtings, dados and risers for steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing of 10mm thick in cement mortar 1:4 complete all as specified. |
| 78 | M&L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosine based solution) @ 0.5 litre per hole by drilling 6mm dia holes at downword angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender