Tender For Comprehensive Repair And Maintenance To Certain B/R And E/M Services In Wsa Under Ge (Af) Tech Area At Af Stn Agra
Tender Value
65 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
27 days left
EMD
1.30 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repair And Maintenance To Certain B/R And E/M Services In Wsa Under Ge (Af) Tech Area At Af Stn Agra
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) of any description and any position not otherwise specially provided incl removal of demolished material out side of MOD land complete all as specified and as directed. |
| 2 | M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in floor, foundation complete all as directed by Engr-in-charge. |
| 3 | M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in floor, foundation filling and mass concrete/sub base of paving including joint cutting & filling with joint filler complete all as specified and directed. |
| 4 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 50 mm thick complete all as specified and directed. |
| 5 | Dismantling floor,hearth or wall tiling including cement mortar bedding/backing, rubbish off the premises complete all as specified & directed by Engr-in-charge. |
| 6 | S & F Chequered cement concrete tiles 20cmx20cmx25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors. |
| 7 | M&L screed bed or bedding layer of morter 20 mm thick cement plaster 1:4 for laying floor finished to receive floor tiles/granite. |
| 8 | M&L for machine pressed precast concrete interlocking paver block of approved shape and size of 60 mm thickness using grey cement and pigment , with minimum compressive strength of 35 N / Sqmm (M-35 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface complete all as specified and as directed |
| 9 | M&L for light shade vitrified ceramic tiles, joint free (edge cut) coloured , 9 to 10mm thick (square/ rectangular) polished, area of each tile n.exc 0.36 sqm, in floors etc laid over with and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete. |
| 10 | M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cment to match colour tiles complete all as specified. |
| 11 | Material and labour for Premium quality, glazed coloured ceramic tiles 200 x 300 x 7mm thick on vertical faces including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match ,complete all as specified. |
| 12 | Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 13 | 20-25mm thick machine cut kota stone slab in riser of steps, skirting,dado and pillar laid over cement screed base laid and jointed with grewy cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 14 | M&L screed bed or bedding layer of morter 15 mm thick 1:6 for laying floor finished to receive floor tiles/granite. |
| 15 | Taking down GI pipe of any grade of 15mm bore including fittings complete all as specified and directed. |
| 16 | Taking down GI pipe of any grade of 20mm bore including fittings complete all as specified and directed. |
| 17 | Taking up or down 25mm or 32mm bore steel tubing including fittings and connections including cleaning for refixing or removal to store all as specified and as directed. |
| 18 | S&F steel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, bore of tube 15mm complete all as specified and directed. |
| 19 | S&F steel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, bore of tube 20 mm complete all as specified and directed. |
| 20 | S&F for 25mm bore steel water tubes, 'medium grade' galvanised, with and including all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed |
| 21 | S&F for 32mm bore steel water tubes, 'medium grade' galvanised, with and including all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed |
| 22 | S&F in repair 15 mm bore bib taps fancy type ,chromium plated, long neck cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified. |
| 23 | S&F in repair 15mm dia, stop valve fancy type, cast copper alloy,chromium plated ,screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions complete all as specified and directed. |
| 24 | S&F in repair 15mm dia, stop valve fancy type with long shank and cup (concealed type), cast copper alloy,chromium plated ,screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions complete all as specified and directed. |
| 25 | S & F in repair 15 mm bore swan neck pillar tap fancy type , cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe all as specified and directed. |
| 26 | S&F in repair 20mm dia PTMT ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed.(min wt- 210 gms), complete all as specified and directed. |
| 27 | S&F in repair vitreous china white, approximate size 160x160x90mm/ chromium plated soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 28 | S&F cast iron floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4).. |
| 29 | S&F in repair Chromium plated shower rose with shower arm round 100mm ABS full chrome with min arm 225 mm with or without swivel joints, any size, including fixing with GI pipe of 15 mm bore complete all as specified and directed. |
| 30 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover and flush pipe etc complete all as specified and directed. |
| 31 | S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low levelcistern complete all as specified and directed. |
| 32 | S & F in repairs vitreous china wash basin, white flat back, size 550 X 400 mm excluding taps, chain and plug and porcelain stopper but including brackets, waste coupling, waste pipe etc complete all as specified and directed. |
| 33 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 6 cm wide complete all as specified and directed. |
| 34 | Dismantling PVC water tanks of capacity exc 500 ltrs but n.exc 1000 ltrs in any position and removing from site complete all as specified and as directed. |
| 35 | S&F tripple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I of 1000 ltrs capacity with & including 20mm dia PTMT float valve complete all as specified and directed. |
| 36 | M&L treatment of soil under existing floors using emulsion @one litre per hole , 300mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors |
| 37 | M&L for securing or easing of steel door with cleaning/greasing/oiling/ overoiling/welding in gear box, crank handle, rolling spring, channels, ball bearing, pully,Gate wheels, adjustment of lock device etc, & any description each complete all as specified and directed.. |
| 38 | Demolition of brick masonry built in CM complete all as specified and directed by Engr-in-charge. |
| 39 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6M mean radius built in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 40 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, and removal of debries to a distance exc 1.5 Km but not exc 5.0 Km all as specified and directed by Engr in Charge.. |
| 41 | M&L for rendaring 15mm thick in cement mortar 1:4 on external wall on fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement all as specified and as directed. |
| 42 | M&L for preparation of new surface of walls (external surfaces) and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)in Camouflage pattern including filling of pot holes and cracks with putty, as per manufactures instructions etc complete all as specified and as directed. |
| 43 | M&L for complete removal of old painted surface of walls (external surfaces) and Finishing walls with Acrylic Smooth exterior paint of required shade (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in camouflage pattern, as per manufactures instructions, incl cleaning and ensure that the surface to be painted is free from any loose, dirt, cracks are to be filled with wall care putty or mixture of white cement and fine sand (in the ratio 1:3) complete all as specified and as directed. |
| 44 | S&F in repair venetian blinds in double layers roller type of approved colour including all accessories, fittings/fixtures required for fixing the same in windows complete all as specified and directed. |
| 45 | M&L for preparation of old plastered surfaces of walls and applying one coat of distemper oil emulsion white or tinted with roller including filling of pot holes and cracks with putty, complete all as specified and directed. |
| 46 | Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified & directed by Engr-in-charge. |
| 47 | Dismantling posts or struts (wood, steel or R.C.C.) any section,embedded in concrete including taking out embedded portion and making good disturbed ground complete all as specified & directed by Engr-in-charge. |
| 48 | Dismantling chain link fencing wire mesh, of any type and size complete all as specified & directed by Engr-in-charge. |
| 49 | M&L for mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting and spot welding etc and similar work conforming to Fe-290 Gde E-165 complete all as directed by Engr-in-charge. |
| 50 | Supply only chain link fencing mild steel galvanised fencing any size and type (size of mesh and dia of wire as directed by Engr-in-charge) complete all as directed by Engr-in-charge. |
| 51 | Fixing only chain link fencing of any type fixed to RCC / steel post with mild steel flat & nut bolt etc,including necessary bolting complete all as directed by Engr-in-charge. |
| 52 | S&F in repair Galvanised, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line of wire to be measured) complete all as specified & directed by Engr-in-charge. |
| 53 | S&F in repair GI concertina coil 1050mm dia ( in stretched position), hot dip galvanised made of high tensile core wire of 2.5mm dia having a strength of 165 kgs/ sqmm and the razor barb tape of 0.5mm thick width barb width of 15mm and length of 22mm, spacing 34mm and coated with zinc 230gsm/sqm having 56loopswith 3 clips per loops and giving coverage of not exceeding 6mtr per coil confirming to latest IS code complete all as directed. |
| 54 | M&L for preparation of new surfaces of steel exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc red oxide primer complete all as specified and as directed by Engineer-In-Charge. |
| 55 | M & L for prepararing old decorated steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed. |
| 56 | M&L ATT along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear meter including drillingand plughing holes etc in apron. |
| 57 | M&L for cleaning of drain n.exc. 60 cm wide and n.exc 60cm in depth by removing deposited soft / loose soil, vegitation/grass and other foreign material and removal of excavated material to a distance exc 50 m but n.exc. 100 m and deposited wherever directed complete all as specified and directed by Engr-in-Charge. |
| 58 | M&L in repair factory made perforated precast RCC drain cover 75mm thcik any size incl 1mm MS Sheet all around the cover(incl placing ) complete all as specified and directed by Engr-In-Charge. |
| 59 | S & F in repairs PVC ( SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to wall including flat iron clamp for proper fixing complete all as specified and directed. |
| 60 | S & F in repairs PVC ( SWR) bends 110 mm dia any radius complete all as specified and directed. |
| 61 | Taking down chowkat or frames exc 1.5 sqm but n. exc 4 sqm each (w/o taking of shutters from the frame ) |
| 62 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) Please Enable Macros to View BoQ information |
| 63 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 34 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender