Tender For Special Repair To Toilet/Bathroom Of Bldg No Bcd T-13, T-14, T-31, T-32, T-15 And T-33 At Trg Area Of 3 Cesr And Provn Of Hard Standing For Eqpt Display And Trg Practice Of 3 Cesr At Rms
Tender Value
49 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
15 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wokha → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Toilet/Bathroom Of Bldg No Bcd T-13, T-14, T-31, T-32, T-15 And T-33 At Trg Area Of 3 Cesr And Provn Of Hard Standing For Eqpt Display And Trg Practice Of 3 Cesr At Rms
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats with shutter n.exc 1.5 Sqm each and refixing in same opening (without taking off shutters from the frame) complete all as specified and as directed. |
| 2 | Taking down chowkats with shutter n.exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and as directed. |
| 3 | Taking down door chowkats with shutter exc 1.5 but not exc 4 sqm each and refixing in same opening (without taking off shutters from the frame) complete all as specified and as directed. |
| 4 | Taking down door chowkats with shutter exc 1.5 but not exc 4 sqm each (without taking off shutters from the frame) complete all as specified and as directed. |
| 5 | S&F in repairs/replacement of 750 ltr capacity rotational moulded polythylene water storage tanks double layer (cylindrical, vertical with closed top ),including provision of 20 and 25 mm dia spouts for inlet and outlet and connection including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 20 mm - 210 gms) complete all as specified and as directed. |
| 6 | S&F in repairs/replacement of 1000 ltr capacity rotational moulded polythylene water storage tanks double layer (cylindrical, vertical with closed top ),including provision of 20 and 25 mm dia spouts for inlet and outlet and connection including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 20 mm - 210 gms) complete all as specified and as directed. |
| 7 | M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with complete all as specified and as directed. |
| 8 | M&L for TMT steel bars 15mm dia and over upto and including 10mm dia in stirrups spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with complete all as specified and as directed. |
| 9 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 10 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors laid over and including 15mm thick screed bed for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed. |
| 11 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors laid over and including 15mm thick screed bed for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed. |
| 12 | M&L for Glazed ceramic coloured tiles in vertical surface including high lighter/strips of tile size 450X 350X 7 mm,/350 x 250 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over and including backing coat of 10 mm thick in CM (1:4) including dismantling of old tiles including cement mortar bedding of any description and removing rubbish off the premises complete all as specified and as directed. |
| 13 | M&L for Glazed ceramic coloured tiles in vertical surface including high lighter/strips of tile size 300X 200X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over and including backing coat of 10 mm thick in CM (1:4) complete all as specified and as directed. |
| 14 | S&F in repairs Pre-painted galvalume aluminum zinc coating GI based corrugated trapezoidal steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 15 | S&F in repairs Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 16 | S&F in repairs 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) non asbestos fibre cement reinforced multipurpose board, pre-painted self embossed, textured designer board E-Board Classic fixed to GI frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre both ways, size of grid 605 x 605mm fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified and as directed. |
| 17 | M&L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints complete all as specified and as directed. |
| 18 | S&F factory made 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-Charge. |
| 19 | S&F stainless stelel wire cloth 0.36 nominal dia of wire and average width apperture 1.40mm and fixed with stainless steel wire staples or wooden beads supplied with shutter etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 20 | S&F stainless stelel wire cloth 0.36 nominal dia of wire and average width apperture 1.40mm and fixed with stainless steel wire staples or wooden beads supplied with shutter etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender