Tender For Composite Work For Structural Repairs, Civil Maintenance, And Upkeep Of Toilet Facilities In Rcm And Lzcs Buildings At North Site And Other Buildings At Gamma Field Site, Barc, Mumbai.
Tender Value
1.91 Crore
Estimated cost
Bid Submission
15 Sep 2026
0 days left
EMD
4.51 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Composite Work For Structural Repairs, Civil Maintenance, And Upkeep Of Toilet Facilities In Rcm And Lzcs Buildings At North Site And Other Buildings At Gamma Field Site, Barc, Mumbai.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing heavy quality CP brass bottle trap 31 / 32 mm of approved equivalent make single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal,of approved equivalent make for wash basins / urinal etc all as per specifications and directed by the Engineer in charge |
| 2 | Providing and fixing 15 mm C.P presstomatic series auto shut urinal flush cock of approved equivalent make and quality |
| 3 | Providing and fixing 15 mm PVC inlet connection suitable for hot and cold water 600 mm long with nuts and washers complete for wash basins/ Urinals etc. with all necessary acessories complete as directed by the Engineer-in-charge |
| 4 | Providing and fixing heavy quality health faucet with 1.50 metres long flexible hose (hand shower) of approved equivalent make with wall brackets and type as per specifications and as directed by the Engineer-in-charge. |
| 5 | Providing and fixing heavy quality C.P .brass waste coupling of following dia for wash basin and sink, of approved equivalent make, size and quality all as directed complete |
| 6 | C.P Brass Waste coupling 32 mm Dia of approved equivalent make Half threaded or Full threaded as per requirement. |
| 7 | Providing and fixing viterious China wash basin of approved equivalent make and colour with C.I. brackets, 15 m C.P. brass pillar tap of approved equivalent make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge |
| 8 | White vitreous China counter top / counter below wash basin size 560 x 410 mm / 560 x 450 mm with single 15 mm C.P. brass pillar tap (OVAL / ROUND /rectangular/Table top )Models |
| 9 | Providing and fixing PVC low level / high level flushing cistern 10 litre capacity of approved equivalent make in white colour with flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures etc. complete as per specifications and as directed by the Engineer-in-charge. |
| 10 | Providing and fixing white vitreous china flat back half stall urinal size 580x380x350 mm / 610 mm of approved equivalent make with Push cock of approved equivalent make,with CP brass flush pipe unions, heavy quality C.P. brass spreaders, C.P waste coupling with dome grating, clamps complete all as per specifications drawings and as directed by the Engineer-in-charge |
| 11 | Providing and fixing white vitreous china European type Water Closet with 'P' or 'S' Trap with solid seat and lid of approved equivalent make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge |
| 12 | E.W.C. pan in White colour with ISI marked white solid plastic seat and lid |
| 13 | Providing and fixing Indian water closet (Orissa pan) of approved equivalent make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge. |
| 14 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm |
| 15 | Providing and fixing heavy quality stainless steel / C.P brass grating of approved equvalent make as specified for floor traps / nahani traps all as directed by the Engineer-in-charge |
| 16 | SS grating 125 mm dia |
| 17 | Providing and fixing PVC rain water pipes conforming to relevant IS type B and PVC SWR fittings & specials conforming to relevant IS including jointing with seal ring / With PVC solvent adhesive including fixing in walls using clamps etc complete all as per drawings, specifications and as directed by the Engineer-in-charge |
| 18 | SWR PIPE 90 mm O/D |
| 19 | SWR PIPE 110 mm O/D |
| 20 | Supplying and fixing Cast Iron Man hole or Cast Iron Steps cover of approved equivalent make and weight as specified in the drawings or as directed by the Engineer in charge. |
| 21 | Providing and constructing Inspection chambers of Internal size clear dimention of 900 x 600 mm in 230 thick brick masonry with cement mortat 1:4 over a bed of 150 mm thick 1:4:8 cement concrete foundation, plastering with cement mortar 1:4 20 mm thick on inside, out side and all exposed sufaces finished with a floating coat of neat cement, brick corbelling at top to provide opening of 900 X 450 mm, embedding the frame and cover with CC 1:2:4 concrete, and fixing cast iron steps if necessary at 300mm intervals complete . Depth of chamber not exceeding 900 mm. (excavation, soling, cast iron cover and C.I steps will be paid separately under relevant item) |
| 22 | Painting G.I pipes with 2 coats of synthetic enamal paint of approved colour over a coat of approved Zinc Chromate Primer all as per specifications and as directed by the Engineer-in-charge. |
| 23 | For 15 mm Dia G.I pipe |
| 24 | For 20 mm Dia G.I pipe |
| 25 | For 25 mm Dia G.I pipe |
| 26 | For 32 mm Dia G.I pipe |
| 27 | For 40 mm Dia G.I pipe |
| 28 | For 50 mm Dia G.I pipe |
| 29 | Providing and fixing Heavy Quality 15 mm C.P brass swan neck pillar cock of approved equivalent make as per specifications and as directed by the Engineer-in-charge. |
| 30 | Providing and fixing C.P brass 2 way Angle cock (2 Angle cock combination in single fitting) of heavy quality of approved equivalent make as per specifications and as directed by the Engineer-in-charge. |
| 31 | Providing and Fixing CP brass 100 mm dia shower rose with Shower arm of Specified make as per specifications and as directed by Engineer-in-charge complete. |
| 32 | Providing and fixing C.P brass Angle cock of heavy quality of specified / approved make, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge |
| 33 | 15 mm n.b CP brass Angle cock of approved equivalent make |
| 34 | Providing and fixing C.P brass bib cock of heavy quality of specified / approved equivalent make as per specifications and as directed by the Engineer-in-charge |
| 35 | 15 mm dia bib cock of approved equivalent type and make . |
| 36 | 15 mm Dia LONG BODY bib cock of approved equivalent type and make |
| 37 | Providing & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved equivalent make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge |
| 38 | 15 mm n.b |
| 39 | 20 mm n.b |
| 40 | 25 mm n.b |
| 41 | 32 mm n.b |
| 42 | 40 mm n.b |
| 43 | 50 mm n.b |
| 44 | Providing , Laying , jointing, fixing and testing Heavy quality (CClass) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines all as directed by the Engineer-in-charge. |
| 45 | 15 mm dia G.I pipe |
| 46 | 20 mm dia G.I pipe |
| 47 | 25 mm dia G.I pipe |
| 48 | 32 mm dia G.I pipe |
| 49 | 40 mm dia G.I pipe |
| 50 | Providing SFMC Micro concrete for strengthening of structural members including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-charg |
| 51 | Using SFMC with 50% Quartz aggregate by weight (Only SFMC consumed alone will be measured for payment) |
| 52 | Core cutting in RCC beyond 50 mm up to and including 100 mm Dia |
| 53 | Core cutting in RCC beyond 100 mm up to and including 150 mm Dia |
| 54 | Providing and fixing minimum 17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Jet Black colour for kitchen platforms, vanitiy counters, wash basin counters, door frames, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete at all levels |
| 55 | Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved equivalent make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) |
| 56 | Anodised Aluminium sections (Minimum anodizing thickness of 15 micron) |
| 57 | Extra for colour anodizing |
| 58 | Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) |
| 59 | With clear float glass panes of 5.00 mm thickness |
| 60 | Providing and fixing double action hydraulic floor spring of approved equivalent (conforming to relevant Indian Standard) for doors including cost of cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass cover plat |
| 61 | Providing and fixing 4 Lever mortise Lock of approved equivalent make suitable for aluminium sections |
| 62 | Providing and fixing approved quality and shape star locks cum handle of approved equivalent make for sliding shutter |
| 63 | Providing and fixing approved quality stain less steel body roller wheels of approved equivalent make for sliding shutter |
| 64 | Providng and fixing Aluminium Grill 10 mm thick in natural Silver anodising of min 15 Micronswith a opening size of 60mm x 45mm and Minimum weight of 4.12 Kg/ Sq.M including providing and fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-charge .Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg/ sq.mm. |
| 65 | Providing and fixing Glazed VITRIFIED floor tiles of approved equivalent make in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved equivalent make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge |
| 66 | Using Tiles of size 600 X 600 mm |
| 67 | Providing and laying minimum 25 mm thick uniform shade Kota stone flooring over 20 mm thick (Avearge) base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in minimum three levels to obtain mirror polish complete with base cement mortar 1:4 (using crushed sand) all as per specifications, patterns and drawings complete |
| 68 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved equivalent make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved equivalent make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge |
| 69 | Providing 15 mm thick plastering using Ready mix internal plastering compound of approved equivalent make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge |
| 70 | Providing 20 mm thick plastering using Ready mix external plastering compound of approved equivalent make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding upto 10 m height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge |
| 71 | Providing and constructing Half brick masonry using Flyash/ Flyash Lime bricks in substructure with minimum 70 kg / Sq.cm strength of approved equivalent make and size in partition walls in C.M 1:4 using crushed sand including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement. (Reinforcement will be paid under relevant item |
| 72 | Providing and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash/ Flyash Lime bricks with minimum 70 kg/ sq.cm strength of approved equivalent make and size in super structure up to and including Floor II Level including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings |
| 73 | Extra for Fly ash brick work in super structure above Floor-II level and up to and including 20 m height by lifting material by mechanical means using tower crane / manual lifting. |
| 74 | Designing, providing and fixing of 4 mm thick approved equivalent make and shade Aluminium Composite Metal Panel of approved equivalent make cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification (Aluminium frame work will be paid under relevant item) Note:ACMP shall be measured tothe actual visible area oftheACP sheet including silicon joints as fixed on site. |
| 75 | Providing and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5 mm (heavy weight) of approved equivalent make with suitable stainless steel screws etc. complete as directed by the Engineer-in-charge |
| 76 | Providing and fixing anodised aluminium aldrops ISI marked of size 300 X 16 mm transparent or dyed to requried colour or shade with necessary screws etc. complete as directed by the Engineer-incharge |
| 77 | Providing and fixing anodized aluminium tower bolts of size 200 X 12 mm ISI marked of approved equivalent make transparent or dyed to requried colour or shade with necessary screws etc |
| 78 | Providing and fixing anodised aluminium baby latch of size 75 X 12 mm ISI marked of approved equivalent make transparent or dyed to requried colour or shade with necessary screws etc. |
| 79 | Providing and fixing mortise latch and lock of approved equivalent make with 6 levers and a pair of handles Inside opening LEFT / Right with necessary screws etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specification |
| 80 | Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved equivalent make with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge. |
| 81 | Providing and fixing aluminium handles 175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved equivalent make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete. |
| 82 | Providing and Fixing Homogeneous 3.00 mm thick PVC sheet / tile in flooring and skirting of approved make in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer including, levelling small undulations with plasterof paris if required , rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-incharge in approved colour and shade |
| 83 | Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved equivalent to give an even shade over a primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge |
| 84 | Providing and painting TWO coats of synthetic enamel paint on new wooden surfaces of approved equivalent of required colour to give an even shade over an under coat of suitable shade primer of approved equivalent including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge |
| 85 | Providing and applying wall painting two coats on new work with premium plastic emulsion paint of approved equivalent to give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge |
| 86 | Providing , centering ,shuttering Form work using PVC film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels |
| 87 | For Sub Structure |
| 88 | For Super Structure |
| 89 | Providing and fixing 6 mm thick mirrors of size 600 x 450 mm of approved equivalent make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge. |
| 90 | Providing and fixing mirror of superior glass of approved quality and of required shape and size with 6mm thick Plain A.C sheet backing fixed to walls with consealed Brass C.P Mirror screws and consealed washers etc.complete all as per specifications and as directed by Enginner-in-Charge |
| 91 | Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick,200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge |
| 92 | Second class teak wood |
| 93 | Providing and fixing 25 mm thick Colour PVC Integral foam Sheet door shutters flush door of approved colour, of approved make or equivalent, design, colour and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges, Fixing of Stoppers, tower bolts, baby latch, aldrop, handles etc.wherever required with S.S. screws (Stopper, Tower bolt, Baby latch, Aldrop, Handels etc Shall be supplied by department) etc. complete as per specifications and as directed by Engineer-in-charge. Note : The door should satisy the following technical parameters as under:1. Density : 0.475 to 0.55 g/cc,2. Hardness (Shore 'D'): min. 55,3. Water absorption : max. 1 %,4. Tensile strength : min. 13 MPa,5. Elongation : min. 15 %,6. Flextural Strength min. 30 MPa,7. Compressive Strength at 10% Deformation : min. 3 MPa,8. Vicat Softening Temperature: more than 75 Deg Celcius9. Flammability: classification B : S3 : D0 (to be tested as per NF EN 13501-1 standard) |
| 94 | Providing and fixing square mouth S.W. gully trap complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design |
| 95 | 150 x 100 mm size gully trap \\"P\\" type |
| 96 | Providing, supplying and fixing 98 mm overall thick partition using stud partition which includes one layer of tapered edge 13mm thick (conforming to BS 5234 –1992, Part 2) is screw fixed with drywall screws of 25mm at 300mm centres to either side of 70mm C stud (0.5mm thick having one flange of 34mm and another flange of 36mm made of GI steel) placed at 600mm centre to centre in 72mm floor and ceiling channel (0.5mm thick have equal flanges of 32mm made of GI steel), which is anchored to the floor & true ceiling using suitable anchor fasteners or metal screws with nylon plugs. The boards are to be fixed to the frame work with joints staggered to avoid leakage through joints. A fixing channel of 99mm width (0.9mm thick having two flanges of 9.5mm each) has to be provided at the horizontal joints of the two boards screw fixed to the studs using metal to metal flat head screws. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with jointing compound, joint paper tape and two coats of drywall top coat. 25mm glasswool slab of density of 32Kg/cu.m shall be placed in the cavity. |
| 97 | Supply of PTMT Ball cock with Epoxy coated with L.P./ H.P.H.D. Plastic ball 40mm nominal bore, 206mm long. Wt. not less than 690 gms. as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
| 98 | Supply of PTMT Ball cock with Epoxy coated with L.P./ H.P.H.D. Plastic ball 40mm nominal bore, 206mm long. Wt. not less than 690 gms. as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender