Tender For Repair And Maintenance Work In Vice Chancellors Bungalow And Office Secretariat(Admin Building) At Tripura University C Us Surjyamaninagar During The Fy 2026-2027.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
73377
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Work In Vice Chancellors Bungalow And Office Secretariat(Admin Building) At Tripura University C Us Surjyamaninagar During The Fy 2026-2027.
BOQ
| Sl. No. | Item Description |
| 1 | SH:13/REPAIRS TO BUILDING 13.30 Repairs to plaster of thickness 12 mm to 20 mm inpatches of area 2.5 sqm and under including cutting thepatch in proper shape and preparing and plastering thesurface of the walls complete including disposal ofrubbish to the dumping ground with all leads and liftsincluding finishing even and smooth and curingcomplete as per direction of the Engineer in charge.13.30.1 With cement mortar 1:3 ( 1 cement : 3 fine sand ). |
| 2 | INTERIOR FINISHING 12.35 Distempering with 1st quality acrylic distemper (readymixed) having VOC content less than 50 grams/ litre, ofapproved brand and manufacture to give an even shade[Payment shall be made after submission of TestCertificate issued by the Manufacturer] :12.35.1 New work ( two or more coats) over and including waterthinnable priming coat with cement primer. |
| 3 | 12.41 Finishing walls with acrylic smooth exterior paint ofrequired shade of approved brand and manufacture[Payment shall be made after submission of TestCertificate issued by the Manufacturer] :12.41.1 New work ( two or more coats applied @ 1.67 litre/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) |
| 4 | 12.19 Providingandapplyingplasterofparisputtyof 2mmthicknessoverplasteredsurface toprepare thesurfaceeven and smooth complete. |
| 5 | 12.60 Painting with synthetic enamel paint of approved brandand manufacture of required colour to give an evenshade [Payment shall be made after submission of TestCertificate issued by the Manufacturer]: 12.60.1 Two or more coats on new work over an under coat ofsuitable shade with ordinary paint (primer) of approvedbrand and manufacture |
| 6 | 14.7 Demolishing brick work including stacking ofserviceablematerialsanddisposal ofunserviceablematerialswithall liftsanduptoa leadof 50metc.complete as per direction of the Engineer- in-charge:14.7.3 In cement mortar. |
| 7 | 5.2Reinforced cement concrete work in walls (anythickness), including attached pilasters, buttresses,plinth and skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor fivelevel excluding cost of centring, shuttering, finishingand reinforcement5.2.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 8 | 5.3Reinforced cement concrete work in beams, suspendedfloors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five levelexcluding the cost of centring, shuttering, finishing and reinforcement5.3.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 9 | 5.19 Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding allcomplete upto plinth level.5.19.4 Thermo-Mechanically Treated bars of grade Fe-500D ormore |
| 10 | 5.8 Centering shuttering including struttings, propping etc.and removal of form work for:5.8.4.1 Suspended floors, roofs, landings, balconies and accessplatform with timber planks |
| 11 | 5.8.6.2 Columns, Pillars, Piers, Abutments, Posts and Struts with wooden plank |
| 12 | 5.8.5.1 Lintels, beams, plinth beams, girders, bressumers andcantilevers with shuttering ply |
| 13 | 6.12 Half brickmasonryworkwith first class bricks insuperstructureuptofloor five level includingcostofall materials as required complete:6.12.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 14 | 12.1 12 mm cement plaster of mix.12.1.3 Cement mortar 1:5 (1 cement : 5 fine sand) |
| 15 | 12.2 15mmcementplasterontheroughsideofsingleorhalfbrick wall of mix:12.2.3 Cement mortar 1:5 (1 cement : 5 fine sand) |
| 16 | M-1.22 1500 60 mm thick factory made c.c interlocking paver block of M-30 Grade Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size,design & shape, laid in required colour and pattern over andincluding 50 mm thick compacted bed of sand, filling the joints with fine sand etc. all complete as per specification and approval/ direction of the Engineer-in-charge. |
| 17 | 10.42 Providing and laying 1st class quality vitrified floor tilesin different sizes (thickness to be specified by themanufacturer) with water absorption less than 0.08% andconforming to IS: 15622- 2017, of approved make, in allcolours and shades, laid over 20mm thick cement mortar1:4 (1 cement : 4 fine sand), jointing with grey cementslurry @ 3.3 kg/ sqm including grouting the joints withwhite cement and matching pigments etc. all complete asper direction of the Engineer-in-charge.10.42.4 Glazed Vitrified Tiles - Full Body (Glossy / Mat Finish/ Anti-Skid)10.42.4.1 Size of tile 600 mm x 600 mm |
| 18 | 10.40 Providing and fixing 1st class quality ceramic glazed walltiles conforming to IS : 15622- 2017 (thickness to bespecified by the manufacturer) of approved make in allcolours, shades of any size as approved by Engineer-incharge in skirting, risers of steps and dados, laid over 12mm thick bed of cement mortar 1 : 3 (1 cement : 3 finesand) jointed with ordinary cement slurry includingpointing with white cement mixed with pigment ofmatching shade etc. all complete as per direction of theEngineer in-charge.10.40.3 600 mm X 250 mm in all shades and design |
| 19 | 11.16Providing and laying pressed clay tiles (as per approvedpattern 20 mm nominal thickness and of approvedsize) on roofs jointed with cement mortar 1:4 (1cement : 4 fine sand) mixed with 2% integral waterproofing compound laid over a bed of 20 mm thickcement mortar 1:4 (1 cement : 4 fine sand) and finishedneat etc. complete as per direction of Engineer-in-charge. |
| 20 | 7.12 Providing and laying flamed finish Granite stoneflooring in required design and patterns, in linearas well as curvilinear portions of the building allcomplete as per the architectural drawings withFlamed finish granite stone slab Jet Black, CherryRed, Elite Brown, Cat Eye or equivalent over 20mm (average) thick base of cement mortar 1:4 (1cement : 4 fine sand) laid and jointed with cementslurry and pointing with white cement slurryadmixed with pigment of matching shadeincluding rubbing, curing and polishing etc. allcomplete as specified and as directed by the7.12.1 18 mm thick stone slabEngineer-in-Charge. |
| 21 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level: 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 22 | 12.10 Neat cement punning. |
| 23 | 9.12 Steel work in built up tubular (round, square orrectangular hollow tubes etc.) trusses etc., includingcutting, hoisting, fixing in position and applying apriming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete.9.12.1 Hot finished welded type tubes |
| 24 | 11.19 Providing & fixing UV stabilised fiberglassreinforced plastic sheet roofing up to any pitchincluding fixing with polymer coated 'J' or 'L' hooks,bolts & nuts 8mm dia. G.I plain/bitumen washerscomplete but excluding the cost of purlins, rafters,trusses etc. The sheets shall be manufactured out of2400 TEX panel rovigs incorporating minimum 0.3%Ultra-violet stabiliser in resin system underapproximately 2400 psi and hot cured. They shall be ofuniform pigmentation and thickness without airpockets and shall conform to IS 10192 and IS12866.The sheets shall be opaque or translucent, clearor pigmented, textured or smooth as specified and asper direction of Engineer-in-charge.11.19.1 2mm thick corrugated (2.5\\" or 4.2\\" or 6\\") or step-down (2\\"or 3\\"or 6\\") as specified. |
| 25 | 9.15 Steel work welded in built up section/framed workincluding cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer usingsteel etc. complete as required:9.15.2 Ingrating, frames, guardbar, railing, brackets, gatesandsimilar works, all complete. |
| 26 | 13.27 Renewing bottom rail and / or top runner of collapsiblegate including making good all damages and applyingpriming coat of zinc chromate yellow primer ofapproved brand and manufacture as required includingremoval of rubbish to the dumping ground with allleads and lifts complete as per direction of the Engineerin charge. |
| 27 | 13.57 Varnishing with varnish ( one or more coats of gluesizing ) of approved brand and manufacture on oldwork including preparation of surface as requiredcomplete as per direction of the Engineer in charge:13.57.1 With copal varnish. |
| 28 | 13.58 French spirit polishing ( one or more coats of gluesizing ) on old work including preparation of surfaceclean, dirt and dust free, sand papered smooth asrequired complete as per direction of the Engineer incharge. |
| 29 | 17.14 Grading roof for water proofing treatment complete asrequired as per direction of the Engineer-in-charge with :17.14.1 Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 30 | 19.7 Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, havingthermal stabilityforhot&coldwatersupplyincludingallCPVCplain&brassthreadedfittingsincludingfixingthepipewithclampsat 1.00mspacing. This includes jointingofpipes&fittingswithonestepCPVC solvent cementand testingof joints complete asper directionofEngineer in Charge.Internal work - Exposed on wall 19.7.3 19.7.2 20 mm nominal outer dia .Pipes. |
| 31 | 19.21 Providing and fixing uplasticised PVC connectionpipe with brass unions 19.21.2 45 cm length19.21.2.1 15 mm nominal bore |
| 32 | 18.73.2 600mm long towel rail with total length of 645mm, width78mm and effective height of 88mm, weighing not lessthan 190gms. |
| 33 | 18.18Providing and fixing P.V.C. low level flushing cisternwith manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixturescomplete.18.18.1 10 litre capacity-White |
| 34 | 18.3318.34Providing and fixing 600x120x5mm glass shelf withedges round of supported on anodised aluminium angleframe with C.P. brass brackets and guard rail completefixed with 40 mm long screws, rawl plugs etc., complete. |
| 35 | Providing and fixing toilet paper holder :18.34.1 C.P. brass |
| 36 | 18.28Providing and fixing P.V.C. waste pipe for sink or washbasin including P.V.C. waste fittings complete.18.28.1 Semi rigid pipe18.28.1.1 32 mm dia |
| 37 | 18.7118.72Providing and fixing PTMT liquid soap container 109mmwide, 125mm high and 112mm distance from wall ofstandard shape with bracket of the same materials withsnap fittings of approved quality and colours weighingnot less than 105 gms |
| 38 | 19.53 Providing and fixing C.P. brass angle valve for basinmixer and geyser points of approved qualityconforming to IS:893119.53.1 15 mm nominal bore |
| 39 | 18.72Providing and fixing PTMT towel ring trapezoidal shape215mm long, 200mm wide with a minimum distances of37mm from wall face with concealed fittingsarrangement of approved quality and colours weighingnot less than 80 gms. |
| 40 | Providing and fixing one nos Rimless Bowl with cisternRange : Opal Code : OPS-WHT-15753NS250UFSMZDescription : Rimless Bowl With Cistern For Coupled WC With UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Conversion Bend, Fixing Accessories And Accessories Set, Size: 380x645x805 mm, S Trap- 250 mm(With Conversion Bend) OF MAKE- JAQUAR exclusive. MRP ₹ 21,350.00 |
| 41 | Providing and fixing one nos Thin Rim Table Top Basin - White Range : JDR Code : JDS-WHT-25907N Description : Thin Rim Table Top Basin, Size: 530x420x140 mm, Shape - Rectangular CE Logo - Certified MRP ₹ 7,000.00 |
| 42 | Providing and fixing one nos Square Shape Single Flow Overhead Shower Range : Rain Showers Code : OHS-CHR-35495 Description : Overhead Shower 150X150mm Square Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System MRP ₹ 3,400.00 |
| 43 | Providing and fixing one nosSingle Lever Basin Mixer - Gold Bright PVD Range : Opal Prime Code : OPP-GBP-15011BPM Description : Single Lever Basin Mixer without Popup Waste with 450mm Long Braided Hoses Registered Design No:276010 MRP ₹ 9,550.00 |
| 44 | Providing and fixing one nosSingle Lever Exposed Parts Kit of Diverter - Gold Bright PVD Range : Fusion Prime Code : FUP-GBP-29065MKPM Description : Single Lever Exposed Parts Kit of Diverter Consisting of Operating Lever, Cartridge Sleeve, Wall Flange (with Seals) & Button Assembly Sleeve & Button (Compatible with ALD-065M) MRP ₹ 4,250.00 |
| 45 | Providing and fixing one nos Hand Shower (Health Faucet) Range : Allied Code : ALD-CHR-577LP Description : Hand Shower (Health Faucet) with a thin hole size mouth jali, 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) MRP ₹ 2,000.00 |
| 46 | Providing and fixing one nos Two Concealed Stop Cocks Range : Aria Code : ARI-CHR-39433 Description : Two Concealed Stop Cocks with Basin Spout (Composite One Piece Body) MRP ₹ 6,800.00 |
| 47 | Providing and fixing one nos Geometric Soap Dish By Hindware Color - Chrome ₹ 1,075/-Incl. of all taxes About the Product Specifications Mount Type Wall Mount Color Chrome Area Basin Warranty 1 Year Catalogue Code F580004CP |
| 48 | Providing and fixing one nos LED Mirror Vertical Frame By Hindware Italian Collection ₹ 10,875/-Incl. of all taxes About the Product Specifications Mount Type Wall Mount Size 800 X 600 Mm Area Basin Shape Rectangle Warranty 1 Year Catalogue Code F680036CP |
| 49 | GUEST BEDROOM TOILET FITTINGS FFProviding and fixing one Rhine Neo Urinal By Hindware Italian Collection Color - Star White ₹ 11,300/-Incl. of all taxes About the Product Specifications Mount Type Wall Mount Size 330 X 330 X 695 Mm Color Star White Area Toilet Shape Round Warranty 10 Years Catalogue Code 96017 |
| 50 | GUEST BEDROOM TOILET FITTINGS FFProviding and fixing one nos Pillar Cock Range : Lyric Code : LYR-CHR-38021 Description : Pillar Cock with 140mm Extension Body MRP ₹ 5,050.00 |
| 51 | GUEST BEDROOM TOILET FITTINGS FFProviding and fixing one Table Top Basin Range : JDR Code : JDS-WHT-25903 Description : Table Top Basin, Size: 480x470x195 mm MRP ₹ 5,000.00 |
| 52 | GUEST BEDROOM TOILET FITTINGS FFProviding and fixing one Ultra Thin Over Head Shower 150 Mm With 225 Mm Arm - Square By Hindware Color - Chrome ₹ 2,275/-Incl. of all taxes About the Product Specifications Mount Type Wall Mount Size 150 Mm Color Chrome Area Bath & Shower Shape Square Catalogue Code F160142CP |
| 53 | GUEST BEDROOM TOILET FITTINGS FFProviding and fixing one Prima WD One Piece Toilet - S 220 With Seat Cover By Hindware Color - Star White ₹ 12,990/-Incl. of all taxes of MAKE HINDWARE exclusive |
| 54 | DINING AREA, KITCHEN & TOILET FITTINGS GROUND FLOORProviding and fixing one Prima WD One Piece Toilet - S 220 With Seat Cover By Hindware Color - Star White ₹ 12,990/-Incl. of all taxes of MAKE HINDWARE exclusive |
| 55 | Providing and fixing one Single Lever Sink Mixer With Flexible Spout WM- White By Hindware Italian Collection Color - ₹ 6,525/-Incl. of all taxes About the Product Specifications Mount Type Wall Mount Color White Area Kitchen Warranty 1 Year Catalogue Code F920010CP |
| 56 | Providing and fixing 01 KS Platino 40x20x8 (Glossy) Pressed Sinks: Easy to clean and maintain with a classic, elegant design ₹ 12,940/-Incl. of all taxes About the Product Specifications Product Dimensions 1016 Mm X 508 Mm X 203 Mm Finish Glossy Warranty 25 Years Thickness 1 Mm OF MAKE HINDWARE EXCLUSIVE |
| 57 | Providing and fixing 02 Cedar Full Pedestal Basin By Hindware Italian Collection Color - Star White ₹ 8,780/-Incl. of all taxes About the Product Specifications Color Star White Area Basin Warranty 10 Years Catalogue Code 9104910SW/1103210SW Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender