Tender For Different/ Miscellaneous Works In Connection With Swachatta/Cleaning Of Various Location Under Kolkata Section Including Jungle Cleaning,Trimming Of Trees & Emergency Ghat Cleaning As And When Required.
Tender Value
45.63 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
21 days left
EMD
91267
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Different/ Miscellaneous Works In Connection With Swachatta/Cleaning Of Various Location Under Kolkata Section Including Jungle Cleaning,Trimming Of Trees & Emergency Ghat Cleaning As And When Required.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceablematerials at site and removing rubbish as directed within a lead of 75 m. a) In GF floor including roof. |
| 2 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. (a) upto 150 mm. thick. In ground floor including roof. |
| 3 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75m. Including stacking of steel bars. (a) In ground floor including roof. |
| 4 | Stripping off worn out plaster and raking out joints of walls, celings etc.upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 5 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond thecompound, in conformity with the Municipal / Corporation Rules for such disposal, loading intotruck and cleaning the site in all respect as per direction of Engineer in charge |
| 6 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 7 | Brick work with 1st class bricks in cement mortar (1:4) In foundation and plinth |
| 8 | In superstructure, ground floor |
| 9 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. a) Pakur Variety |
| 10 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary [Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar. 20 mm thick plaster. In Ground floor |
| 11 | 15 mm thick plaster. In Ground floor |
| 12 | With 1:4 cement mortar. 10 mm thick plaster. In Ground floor |
| 13 | Labour for Chipping of concrete surface before taking up Plastering work. |
| 14 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE: Cement 0.152 cu.m per 100 sq.m. |
| 15 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. One Coat. In ground floor. |
| 16 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost ofmaterial, labour, scaffolding and all incidental charges but excluding the cost of primer. Normal Acrylic Emulsion . In Ground floor (Two Coat) |
| 17 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 18 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 19 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On timber or plastered surface : With other than hi-gloss of approved quality. Two coats (with any shade except white) |
| 20 | On steel or other metal surface : With other than hi-gloss of approved quality. Two coats (with any shade except white) |
| 21 | Uprooting and removing plants from the surface of walls parapet etc and making good damages. (Repairing of damages to be paid separately). (a) Small plant of girth of exposed stem upto75mm. Lift upto 6 mtr. |
| 22 | Medium size plant of girth of exposed stem above 75 mm. but not exceeding 150 mm. lift upto 6 mtr. |
| 23 | Large plant of girth of exposed stem above 150 mm. but not exceeding 225 mm. lift upto 6 mtr. |
| 24 | Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15cm depth and disposal of the rubbish within a lead upto 75 m as directed. |
| 25 | Cutting of branches of trees shrubs and trimming of grass and weeds: i) Cutting of branches of trees and shrubs from the road way or with in R.O.W including disposal of wood and leaves to suitable location. |
| 26 | Clearing compound premises of shurbs, plants, jungles etc. By cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary). |
| 27 | Scraping of moss, blisters etc. thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) |
| 28 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to bemade onmeasurement of finished quantity) |
| 29 | Supply Air Compressor machine including labour, Operator, fuel permit etc. for 8 hours at desired location all complete |
| 30 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1500 mm. |
| 31 | Painting block letters or digits in Black Japan or any approved paint as per direction. Size above 10 cm. and upto 12.5 cm. |
| 32 | Size above 12.5 cm. and upto 15 cm |
| 33 | Size above 5 cm. and upto 7.5 cm. |
| 34 | Size above 7.5 cm. and upto 10 cm. |
| 35 | Providing & Supplying unskilled labour for misscellaneous cleaning works.Normal time of work 9 hours incuding one hour recess. |
| 36 | Providing & Supplying Semi-skilled labour for misscellaneous cleaning works.Normal time of work 9 hours incuding one hour recess. |
| 37 | Providing & Supplying Skilled labour for miscellaneous cleaning works.Normal time of work 9 hours incuding one hour recess. |
| 38 | Hire charges of Earth movers / Excavator -cum -loader for 8 hours. including one no operator , one no. helper ,fuel etc. The rate inclusive of all expenses etc complete but excluding G.S.T. |
| 39 | Cutting chase upto 125x150mm. And subsequent mending of damages. In brick wall [Cement-3.6 Kg/Mtr] |
| 40 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) With carried earth arranged by the contractor with in a radius exceeding 5km. but not exceeding 10 km. including cost of carried earth. |
| 41 | 125 mm. Thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 42 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. Pakur Variety |
| 43 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). Steel shuttering or 9 to 12 mm thick approved quality plyboard shuttering in any concrete work |
| 44 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor/upto 4 m . Tor steel/Mild Steel. Otherthan SAIL/TATA/JSW/JSPL/SHYAM/SRMB/BMASL/ELECTRO STEEL/SSL |
| 45 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55mm & 25mm self tapping screw, EPDM Washer 16mm dia & 3mm th. washer etc. complete with 150mm end lap and one corrugation minimum side lap.(Payment to be made on area of finished work). (i) In Roof:- a) With 0.5 mm thick sheet |
| 46 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. For structural members of specified sections weighing less than 22.5 Kg./m |
| 47 | For Structural Works in Roof Trusses etc. using joists, channels and angles of specified section weighing less than 22.5 kg/ m |
| 48 | Cutting to requisite length or shape departmental R.S. joists, channels, angles, tees, plates etc. |
| 49 | M.S .or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugsing round floor. Grill weighing above 16 Kg./sq.mtr and above. Including hanging and locking arrangements including supply of materials and labour complete. |
| 50 | Labour for loweringand stackingafter dismantling inpartsR.S. joists, channels, angles, tees, plates etc.complete as directed (a) From 1st floor level |
| 51 | Welding in M.S. structural work with gas or electric: Tack weld |
| 52 | Continuous weld. |
| 53 | Rule pointing to brickwork in cement mortar (1:4) including raking out joints & top finishing. |
| 54 | Flush pointing to brick work in cement mortar (1:4) including raking out joints. |
| 55 | Supplying of different well grown plants bushy and healthy, Avg. height 2 feet i.e. exposed height including setting with 1 ft height plastic pot. all leads & lift, carriage, handling, manuring etc. Foxtail & Arica Palm, Thuja Jhaw, Ixora Coceana (Many Colours), Hibiscus (Bangalore Variety), Madhumalati (Hybride), Victoria etc. |
| 56 | Mixed Variety Patabahar (Croton), Dracaena (Mahathma, Keder, Victoria, Jamaica), Song of India, Orcaria kooci etc. |
| 57 | Supplying, fitting fixing regulatory/symbol/road sign/ direction board sign with Vinyl sticker of approved quality for lettering/ figuring direction, arrow, symbol etc. pasted on 4mm thick plastic board having necessary holes at all corners and edges fixing with necessary bolting etc. with the existing steel/ other structures as per direction. The rate including cost of Vinyl sticker, plastic board, lettering/ figuring etc. Fitting, fixing, hoisting & placing in position on steel frame work with necessary bolting and transport charges complete as per approved drawing etc & direction of Engineer-in-charge but excluding the cost of required steel frame. |
| 58 | Supply and installation of Security KIOSKs conforming to specification Top frame: 50 X 50 X 2.2 mm SHS SectionBottom frame: 50 X 50 SHS Section Vertical Cross Member Tata Or Jindal Made Or Equivalence, 50 X 50 SHS Section From Bottom Structure 12” Gap.All Structure will be 4 Side Mig Welding And 2 Coat Anti Rust Primer and 2 Coat PaintStiffener top: 50 X 50 SHS Section Tata Or Jindal Make Or EquivalenceFrame: 38 X 38 SHS Section Tata Or Jindal Make Or Equivalence . Wall Thickness: 2 mm Corrugated CRCA Sheet Tata/ Jindal Or Equivalence makeRoof thickness: 2 mm Corrugated CRCA Sheet Tata/ Jindal Or Equivalence makeWall & ceiling interior: Primer & Paint. Bottom flooring: 18 mm Thick Cement Fiber Board Shera Make With 2 mm PVC Mat.Window: 2 No 915 X 915 Aluminium Sliding Window 4 mm Glass one side view with Safety Grill & Canopy.Door: 1 No 6’ X 3’ MS Door.Electrical: Conceal, Finolex/ Ploycab Wire. 1 No RCB, Main Switch Box For a. All Switch Socket MCB Made by Havells/ AnchorOutside paint: 2 Coat Anti Rust Primer And 2 Coat Paint Choiced by Client make By Berger/ Asian Paints/ Nerolac.Accessories: Table-1 no, Fan Point – 2 Nos. Ac Point – 1 No, Light – 2 NosInsulation: 100mm thick Rockwool Twiga make. Interior cladding: 8mm thick High density fibre (HDF) board. Size 10ft(L) X 8ft(B) X 8ft 6inches(H) [Internal dimension] |
| 59 | Size 10ft(L) X 10ft(B) X 8ft 6inches(H) [Internal dimension] |
| 60 | Supply of Fitting and Fixing of PVC White Vertical Blind.Made of Premium febrics in Width 5\\" Or 4 \\",minimum overlapping of 3/4 in fabric.top aluminum anodized rail of 1.4 mm thickness.2 inch wide channel with front lamination of same fabric .runners having stainless steel hooks with built-in shock spring and self alingning slip clutch.End control box composed of doubt@ gear system .Stainless steel spacers.bottom weight fully plastic covered linked with plastic based chain etc.incuding all complete. |
| 61 | Supply fitting and fixing of grey interlocking concrete grass pavers ofsize 400 mmx 400 mm having thickness 80mmof concrete grade M-30 including fixing ofthe same by sand bedding of50 mmthickness all complete along with necessary transport changes, carriage, labour charges etc as per design and direction ofthe Engineer-in-charge. |
| 62 | Supplying, fitting & fixing Zn-Al alloy(55%Al&45%Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting framework) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16mm dia & 3 mm th.washer etc. complete with 150mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). in roof With 0.5 mm thick sheet |
| 63 | Manufacturing and supplying of designer cast iron for Railing, fencing, etectric Poles and other different types of decorative items of any different sizes and shapes as per the required design and pattern of FG-200 Grade, all complete at site including loading at source , carriage and unloading at site, as per direction of the concerned engineer. |
| 64 | Providing,making and fixing SS/Rose gold/Gold Matt /Glossy finish Etching signage (22 gauge) Name/Designation/Push/Pull /Gents /Ladies etc of approved size best make and design including necessary lettering,adhesive ,hook etc for fixing/hanging as per direction of engineer's representitive . all complete |
| 65 | Providing and fixing of factory made uPVC casement window (White Colour) (U value=1.9-1.3 W/m2K, flame resistant, self extinguishing, lead free) comprising uPVC multi-chambered frame, Sash,& Mullion with having wall thickness of 2.3mm (±0.2mm)duly reinforced with G.I. section1.6mm(±0.2 mm)made from roll forming process of required length. All corners off rameand sashwill be fusion welded.mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's,uPVC extruded glazing beads of appropriate dimension,EPDM gasket, G.I fasteners 100x8mm size for fixing frame to finished wall,plastic packers,plastic caps and necessary stainless steel screws etc. shall be provided in all frame, sash & mullion,wherever necessary. Thereafter,5mm clear annealed glass shall be provided in the sash with the help of uPVC glazing bead and hardware, i.e.,stainless steel (SS304 grade) friction hinges & zinc alloy (white powder coated)casementhandles(in window) &3D Hinges & Multi point Lock(indoor) shall be provided.Window frame shall be fixed to the wall with 100 mm long and 8mm dia. Fasteners and after fixing frame the gap between frameandadjacent finishedwall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete inall respect asperapproveddrawing & direction of Engineer-In Charge. (Note:Profile manufacturer &Window Manufacturer must be one & same, Only manufacturer Waranty is aceptable) Casement Door with glass/uPVC panel frame of size 67x62 mm & Sash of size 67x115mm& Mullion (if required )of size 67x78 mm both having wall thickness of 2.3 ± 0.2 mm |
| 66 | Casement Window frame of size 65x58mm &Sash/Mullion of size 65 x80mm (Window Height above 1200mm or Building height above 18mtr) both having wall thickness of 2.3 ± 0.2 mm |
| 67 | Fixing of bamboo posts by digging hole in all sorts of soil and subsequent thorough repacking the same with spoils including thecost of onecoat of coal-tarring the embedded portion of the bamboo :) Depth 600 mm. |
| 68 | Strong bamboo posts,posts plates,rafters, tiesetc. Fitted and fixed complete with coirropeornails as directed. (Embedded portion of posts shall also be paid for against this item cost of digging hole and repacking being paid for seperately) :(b) 100 mm. dia bamboo |
| 69 | Reimbursement towards materials such as dustbin, presticide, fertilizer and phenyl, naphthalene ball, odonil, liquid soap, harpic, bleaching powder, brooms, detergent etc. of required quanty as directed. Payment shall be made as per actual amount of the original challan/ Tax invoice plus considering 11% contractor's profit. Contractors's quoted percentage (above/below/at par shall not be applicable on the amount payable againts this item) |
| 70 | Cutting/cleaning/removing jungles including uprooting/removing of rank vegetation , cutting grass, bush wood cutting/removing small tree saplings or branches of trees falling under the cutting area at different area and removing spoil upto a distance of 50 m outside the periphery of the area cleared as per direction including all lead, lifts , cutting instruments , labour etc complete in all repsect. |
| 71 | Cutting of branches of trees shrubs and trimming ofgrass and weeds: i) Cutting of branches of trees and shrubs from the road way or with in R.O.W including disposal of wood and leaves to suitable location as per technical specification Clause 1914 for Rural Roads of MORD. |
| 72 | Surface dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. |
| 73 | Uprooting and removing plants from the surface of walls parapet etc. and making good damages. Repairing of damages to be paid separately. Small plant of girth exposed stem upto 75mm. lift upto 6 mtr. |
| 74 | Medium size plant of girth of exposed stem above 75 mm but not exceeding 150 mm lift up to 6 mtr. |
| 75 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. |
| 76 | Cleaning and removing conservancy garbage mixed with rubbish & other filthy materials from the road side flank, drain and compound including cutting, loading, unloading to and from truck or cart by Mathor labour & removing the same to any distance. |
| 77 | Supply of unskilled labourers for cleaning garbage etc works and other miscellaneous non measurable works for a period of 8 hours. |
| 78 | Hire Charges of Tata ACE including driver, fuel and other tools & tackles but excluding the labour cost of loading and unloading for shifting job at various place of SMP, Kolkata. For the Period of 8 hr. As directed by EIC. |
| 79 | Reimbursement for supply of miscellaneous cleaning materials like Broomsticks,Phynyle ,Shovel ,240 lits Wheel Garbage Dust bin ,Plastic Pedal Bin bags etc as may be required form time to time for cleaning purpose .(on submission of original cash memo/taxinvoice plus considering 11% contractor's profit. Contractors's quoted percentage (above/below/at par shall not be applicable on the amount payable againts this item)). |
| 80 | Procurement and supply of Bleaching powder confirming to specification of BIS 1065-1989; Graded -2 (minimum chlorine content should be 32% ) to be used for water purification. |
| 81 | Suppying cement bags in good condition. |
| 82 | Filling empty Cement bags with dry earth or sand ,stitching the bag (Cost of thread included) and carrying and placing them in position and all inidental charges complte but excluding cost of sand and gunny bags. |
| 83 | Filling in foundation or plinth by silver sand in layers not exceeding 150mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment lo be made on measuremen I of finished quantity) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender