Tender For Waterproofing Repair Work Of Bsnl Staff Quarter No . 18 & 15 Of Type Four Block At P&T Colony Char Imli Bhopal.
Tender Value
3.92 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
6 days left
EMD
7900
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Waterproofing Repair Work Of Bsnl Staff Quarter No . 18 & 15 Of Type Four Block At P&T Colony Char Imli Bhopal.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : |
| 2 | 3 mm thick |
| 3 | Grading roof for water proofing treatment with |
| 4 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 5 | Cement mortar 1:4 (1cement : 4 coarse sand) |
| 6 | 12 mm average thickness cement plaster of mix : (for repair of Brick work,perapet or terrace top etc .) |
| 7 | 1:6 (1 cement: 6 fine sand) |
| 8 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
| 9 | 20 mm nominal outer dia. Pipes. |
| 10 | 25 mm nominal outer dia. Pipes. |
| 11 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 12 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 13 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 15 | One or more coats on old work. |
| 16 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. |
| 17 | Internal Work- Exposed on wall |
| 18 | Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. |
| 19 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (for Brick work in wall or Platforms for water tank suppors ) |
| 20 | In cement mortar |
| 21 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 22 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 23 | 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. |
| 24 | Removal and refixing in position the exisiting PVC water storage tanks ( up to 1000 liter capacity ) for the purpose of providing space for roof repair work including all operations of dismembering and refixing the inlet and outlet water supply lines of G.I. or PVC of any dia. , float valves , tank covers etc. all complete making the water tanks operational again.( Cost of mterial like PVC Pipes , Float valves , covers if required extra in adition to available shall be paid separately ) |
| 25 | Providing and placing in position durable grade PVC factory made circular shaped stands for placing and supporting circular PVC water storage tanks of capacity up to 1000 liters, placed on terrace in line and level . |
| 26 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 27 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 28 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 29 | Credit for taken out / replaced items |
| 30 | Unserviceable GI pipes of any dia. |
| 31 | Unserviceable Brass fittings. |
| 32 | Painting with aluminium paint of approved brand and manufacture to give an even shade . |
| 33 | Two or more coats on new work Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender