Tender For 2D, 3D Painting And Steel Work In Mr5 Transfer Station
Tender Value
18.57 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
27 days left
EMD
13930
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ujjain → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 2D, 3D Painting And Steel Work In Mr5 Transfer Station
BOQ
| Sl. No. | Item Description |
| 1 | normal 2D WALL painting with good quality paint as per eng. In charge (including GST) also including prepration of surface and BASE etc. |
| 2 | WRITING WORK with WALL good quality paint as per eng. In charge (including GST) also including prepration of surface and BASE etc. |
| 3 | 3D WALL PAINTING with good quality paint as per eng. In charge (including GST) also including prepration of surface and BASE etc. |
| 4 | Earth work in excavation for foundation, trenches forpipes / cables or drains etc. by mechanical means /manual means (exceeding 30cm in depth.) includingramming of bottom, dressing of sides, disposal of excavatedearth including of all lift and lead upto 50m. Disposed earthto be levelled and neatly dressed.all kind of soil. |
| 5 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering All work up to plinthlevel. Cement concrete grade M-10 (Nominal Mix) with 40 mm maximumsize of stone aggregate |
| 6 | Painting Steel work with Deluxe Multi Surface Paint to give an evenshade. Two or more coat applied @0.90 ltr/10 sqm over an under coatof primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture |
| 7 | Wall painting with plastic emulsion paint of approved brandand manufacture to give an even shade : One or more coats on oldwork. |
| 8 | Wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade:Two or more coats on new work |
| 9 | Structural steel work riveted, bolted or welded in built upsections, trusses and framed work, including cutting, hoisting, fixingin position and applying a priming coat of approved steel primer allcomplete: |
| 10 | Steel work welded in built up sections/ framed work including cutting,hoisting, fixing in position and applying a priming coat of approvedsteel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gatesand similar works. |
| 11 | Providing and laying in position specified grade of reinforcedcement concrete excluding the cost of centering, shuttering,finishing and reinforcement - All work up to plinth level :5.1.1 Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum sizeof stone aggregate. |
| 12 | Providing and fixing on wall face unplasticised Rigid PVC rainwater pipes conforming to IS : 13592 Type A including jointing withseal ring conforming to IS : 5382 leaving 10 mm gap for thermalexpansion.(i) Single socketed pipes. 75mm diameter |
| 13 | Providing and fixing on wall face unplasticised Rigid PVC rainwater pipes conforming to IS : 13592 Type A including jointing withseal ring conforming to IS : 5382 leaving 10 mm gap for thermalexpansion.(i) Single socketed pipes. 110mm diameter |
| 14 | Distempering with 1st quality acrylic distemper (ready mixed) ofapproved manufacturer, of required shade and colour complete, as permanufacturer's specification.Two or more coats on new work. |
| 15 | Supply & installation of precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engineer-incharge) 0.50 mm ±5% total coated thickness (TCT) thick Zinccoating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches while transportation and should besupplied in single length upto 12 meter or as desired by Engineer-incharge. The sheet shall be fixed using self drilling/self tappingscrews of size (5.5x 55mm) with EPDM seal or with polymer coatedJ or L hooks, bolts and nuts 8mm diameter with bitumen and G.I.limpet washers or with G.I. limpet washers filled with white leadcomplete upto any pitch in horizontal/vertical or curved surfacesexcluding the cost of purlins, rafters and trusses and includingcutting to size and shape wherever required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender