Tender For Renovation/Interior Works At All Floors Of Head Office Of Directorate Of Fisheries At Panjim-Goa (Civil, Electrical, Interior, Furniture & Aesthetics Works).
Tender Value
3.30 Crore
Estimated cost
Bid Submission
07 Sep 2026
15 days left
EMD
6.60 Lakhs
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation/Interior Works At All Floors Of Head Office Of Directorate Of Fisheries At Panjim-Goa (Civil, Electrical, Interior, Furniture & Aesthetics Works).
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS1.00 EARTHWORKSEarthwork in excavation over areas (exceeding 30cms in depth, 1.50m in width as well as 10sqmts on plan) in all types of stratas comprising of any type of materials such as soil, silt clay, sand, gravel, murrum of all types of conglomerates, laterite rock, soft rock, ordinary rock, disintegrated rock, fissured/shattered rock, decomposed rocks, weathered rock, etc & all such other materials either in full or part as the case may be adopting any method/methods as may be convenient or permitted including chiseling, wedging etc. in all conditions such as dry, moist, foul, saturated, submerged etc as directed by Engineer etc. all complete including refilling, dressing of sides, ramming of bottom, including all lead & lift, including getting out the excavated soil as directed including pumping & bailing out water, barricading danger, lightening, guarding as directed by Engineer upto depth of 1.5m (Blasting Prohibited) |
| 2 | Earthwork in excavation in foundation, pipeline trenches, drain (not exceeding 1.5m in width or 10 sq.m. on plan) in all types of stratas comprising of any type of materials such as soil, silt clay, sand, gravel, murrum of all types of conglomerates, laterite rock, soft rock, ordinary rock, disintegrated rock, fissured/shattered rock, decomposed rocks, weathered rock, etc and all such other materials either in full or part as the case may be adopting any method/methods as may be convenient or permitted including chiseling, wedging etc. in all conditions such as dry, moist, foul, saturated, submerged etc. as directed by Engineer etc. all complete including refilling, dressing of sides, ramming of bottom, including all lead & lift, including getting out the excavated soil as directed including pumping & bailing out water, barricading danger, lightening, guarding as directed by Engineer upto depth of 1.5m (Blasting Prohibited) |
| 3 | Refilling the pipeline/foundation trenches, plinth sides, foundation, etc. with available excavated earth in layers not exceeding 20cm in depth consolidating each layer by ramming & watering lead upto 50m & all lifts & disposal of surplus earth as directed by Engineer in charge |
| 4 | Supplying & filling in plinth under floors, trenches including watering, ramming, consolidating & dressing completeMoorum |
| 5 | 2.00 BRICK MASONARY WORKSBrick work using fly ash bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with bricks of class designation 40 kgs / cm2. in foundation & plinth230 x 110 x 80 mm |
| 6 | Brick work using fly ash bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with bricks of class designation 40 kgs / cm2. in superstructure upto floor five level230 x 110 x 80 mm |
| 7 | 3.00 LATERITE MASONARY WORKSProviding & laying rubble packing with hard laterite stone under floors including watering ramming & consolidating etc. in pipeline trenches & other foundations complete |
| 8 | Providing & fixing laterite stone cladding tiles of 6\\" x 12\\" or 7\\" x 12\\" in sizes having thickness 19mm including fixing material - cement, adhesive & installation done in paper joint with natural grout finish, including polishing (warnish or nano coating of completed cladding works) |
| 9 | Providing & fixing shera boards to vertical walls with MS tube sections 40x40mm connecting to the RCC members with insert plate using HSFG bolt braced at equal interval, (maximum height to be covered using shera board is upto 9m) |
| 10 | Providing & laying Autoclave Aerated cement blocks masonry (Light Weight Foam Concrete Blocks) with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing & placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work |
| 11 | 4.00 PLAIN CONCRETE WORKSProviding & laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering & finishing inAll works upto plinth level |
| 12 | Providing & laying upto floor five level cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement : 3 fine sand) including centering & shuttering etcKerbs, steps & the like at or near ground level |
| 13 | Providing & laying upto floor five level cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement : 3 fine sand) including centering & shuttering etcString courses, copings, bedplates, anchor blocks, plain window sills & the like |
| 14 | Providing & laying upto floor five level cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement : 3 fine sand) including centering & shuttering etcSmall lintels not exceeding 1.5m clear span, including coping & the like requiring form work to the suspended portions |
| 15 | Providing & laying upto floor five level cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement : 3 fine sand) including centering & shuttering etcMoulding as in cornices, window sills etc. exceeding 15 cm in girth |
| 16 | 5.00 REINFORCED CEMENT CONCRETECentering & shuttering including strutting, propping etc. & removal of forms forArches, domes, vaults upto 6.00 span |
| 17 | Centering & shuttering including strutting, propping etc. & removal of forms forVertical or horizontal fins individually forming box louvers or projected bands |
| 18 | Centering & shuttering including strutting, propping etc. & removal of forms forSides & Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers & Lintels plinth beams not exceeding 1m in depth at all levels |
| 19 | Centering & shuttering including strutting, propping etc. & removal of forms forSuspended floors, roofs, landings, shelves & their supports, balconies & chajjas at all levels |
| 20 | Providing TMT steel reinforcement bars of SAIL, TATA. VIZAG make only (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member |
| 21 | Providing & laying in position machine batched concrete (BMC), machine mixed & machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering, shuttering, finishing & reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength & durability as per the direction of the Engineer-incharge. All works upto floor V level. Add for providing richer or leaner mixes respectively at all floor levels. Providing M-30 grade concrete by using 420kgs of cement per cu.m. of concrete instead of M-25 grade of B.M.C. |
| 22 | 6.00 WOOD WORKProviding & fixing wood work in frames of doors, windows, clerestory windows, trusses & other frames wrought framed & fixed in position Second class Indian teak wood |
| 23 | Providing & fixing 35 mm thick panelled glazed or panelled & glazed shutters for doors, windows & clerestory window including anodized aluminium butt hinges with necessary screwsSecond class Indian teak wood |
| 24 | Extra for superior type of glass panes used instead of ordinary glass panes in glazed or panelled & glazed doors, windows, clerestory windows (total area of shutters to be measured). |
| 25 | Extra for providing vision panel not exceeding 0.1 sq.m. in all types of flush doors (cost of glass excluded)Rectangular or square Unit: SQ.M. door area |
| 26 | Providing & fixing first class Indian teak wood moulded beading to door & window frames with iron screws, plugs & priming coat on unexposed surfaces etc50 x 12mm |
| 27 | Providing flat iron hold fast 40 cms including fixing to frame with 10mm dia bolts, nuts & wooden plugs & embedded in cement concrete block 30x10x15 cms 1:3:6 mix (1 Cement : 3 Coarse Sand : 6 Stone aggregates 20mm nominal size)40 x 3 mm flat iron hold fast 15cm long |
| 28 | Providing & fixing MS grill of required pattern in wooden frames of windows, masonry etc with MS flats, square or round bars with round headed bolts & nuts or by screwsPlain Grill |
| 29 | Providing & fixing bright finished brass sliding door bolts with nuts & screws etc complete 250 x 16mm |
| 30 | Providing & fixing bright finished brass tower bolts (barrel type) with screws etc. complete 250 x 10mm |
| 31 | Providing & fixing bright finished brass tower bolts (barrel type) with screws etc. complete 100 x 10mm |
| 32 | Providing & fixing bright finished brass handles with screws etc. complete 125mm |
| 33 | Providing & fixing bright finished brass door latch with necessary screws etc complete 250 x 16 x 5mm |
| 34 | Providing & fixing 150 mm. bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complet |
| 35 | Providing & fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws & fittings complete |
| 36 | Providing & fixing Stainless Steel Cylindrical lock 60mm dia with pair of knob, keys etc. with necessary screws etc. for doors complete as approved by engineer. Entrance Function: Internal Push Button & External Key Operation |
| 37 | Providing & fixing Stainless Steel tubular lever DType mortise handles with round/Square nose, 24mm Mortise/sash lock body & Strike plate (all SS Finish), Pin cylinder 60mm with one side key & other side knob/thumb turn with necessary screws etc. complete |
| 38 | Providing & fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type (BWP), core of block board construction with frame of 1 st class hard wood & well matched teak 3 ply veneering with vertical grains or cross bands & face veneers on both faces of shutters35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 39 | Providing & fixing Three track Sliding Windows Yashashri make or equivalent, made out of 97mm x 43mm x 2mm upvc multi-cavity reinforced with G.I. channel & having up word projection for sliding of shutter on Nylon Rollers & having slope for draining rain water outside & welded in corners. Shutters are made out of 57mm x 31mm x 2mm multi-cavity section having provision for nylon rollers fixing, glass fixing with EPDM gasket, glass bead & welded in corners. In Three Track Sliding window 4mm clear glass is used. The average weight of Three Track Sliding window is 16.5 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods |
| 40 | Providing & fixing Three track Sliding Windows Yashashri make or equivalent, made out of 97mm x 43mm x 2mm upvc multi-cavity reinforced with G.I. channel & having up word projection for sliding of shutter on Nylon Rollers & having slope for draining rain water outside & welded in corners. Shutters are made out of 57mm x 31mm x 2mm multi-cavity section having provision for nylon rollers fixing, glass fixing with EPDM gasket, glass bead & welded in corners. In Three Track Sliding window 4mm clear glass is used. The average weight of Three Track Sliding window is 16.5 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods |
| 41 | 7.00 STEEL AND ALUMINIUM WORK Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses & framed work including cutting, hoisting, fixing in position & applying priming coat of red lead paintIn tees, angles, flats & channels |
| 42 | Providing & fixing bolts with nuts & washer complete |
| 43 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923/Rectangular Hollow Section (RHS) IS4923/Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA, VIZAG, JSW, APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer, including welding & bolted with special shaped washers etc. complete |
| 44 | Providing & fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding & handling etc. complete as per direction of the Engineer-incharge: Adjustable louvered windowsFigured glass |
| 45 | Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section |
| 46 | 8.00 FLOORING AND FLOOR FINISHESKotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) 20mm thick |
| 47 | Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) Kotah stone slab flooring over 25 mm thick in risers of steps, skirtings, dado & pillars laid on 12mm (average) thick cement mortor 1:3 (1 cement : 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete |
| 48 | Providing & fixing Kota stone tread tiles 35mm thick in single piece with rounded of nosing antiskid groove laid on & including 20mm (average) thk bed of cement slurry including pointing with pigmented cement slurry to match the shade of the slab, cleaning etc. complete |
| 49 | Providing & laying flamed finish Granite stone flooring in required design & patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid & jointed with cement slurry & pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing & polishing etc. all complete as specified & as directed by the Engineer: Flamed finish granite stone slabJet Black |
| 50 | Providing & fixing Granite stone slabs (flamed finish) 18mm thick in risers of steps, skirting, dado & pillars laid on cement paste & jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing & polishing complete Jet Black |
| 51 | Providing & laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction & of aprpoved size and design/shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 & manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm60 mm thick in all colours except grey (M35 grade) |
| 52 | Providing 20mm thick marble slab to urinal partitions with cement complete |
| 53 | Providing & laying 20mm thick cuddapah in shelves over 20 mm thick base of cement mortar 1:3 complete |
| 54 | Providing 25 mm thick cuddapah slabs machine cut & polished on either side in partitions including making necessary grooves in the wall & fixing with cement mortar, complete as directed by the engineer-in-charge |
| 55 | Providing & fixing vitrified matt finished (600x600) & 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 & jointed with cement slurry complete |
| 56 | Providing & fixing Vinyl flooring of approved shade & design with adhesive complete |
| 57 | Providing & laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement & matching pigment etc., complete Light Shades |
| 58 | Providing & laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% & conforming to IS:15622 of approved make in colours & shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement & matching pigment etc., complete 600 x 600 mm light Shades |
| 59 | Fixing glazed/ceramic/vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (water based) conforming to IS:15477, using 5 kg. adhesive per sq.m of tile area, in average 3 mm thickness |
| 60 | Providing & fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % & conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps & dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete600 x 600 light shades |
| 61 | Providing & fixing 18 mm thick gang saw cut, mirror polished, premoulded & prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias & similar locations of required size, approved shade, colour & texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour & shade, area of slab over 0.50 sqmJet Black |
| 62 | Providing & laying laminated wooden flooring of approved make (square foot company) laid as shown in drawing including adhesive pasted on well levelled vitrified flooring as per instruction of engineer in charge, product specs; LF Basic Oak Cappucino Plank of size; 1215x195x8mm thk, Basic rate : 1200/sqm |
| 63 | Providing & laying laminated wooden skirting of approved make (square foot company) laid as shown in drawing including adhesive as per instruction of engineer in charge, product specs; matching LF Skirting 3\\" 12mm thk |
| 64 | 9.00 ROOFING & CEILING WORKSProviding & fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge |
| 65 | Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge |
| 66 | Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab & laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water & the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour & materials & including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as & when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m. |
| 67 | Gypliner or equivalent ceiling which includes providing & fixing G.I. HG angle of sie 0.55 mm thick having two equal flanges of 25 mm each screw fixed to brick wall/ partition with the help of nylon sleeves & screws at 610 mm c/c. Then suspending chan 12.5 mm tapered edge Gypboard (confirming to IS:2095-1982) is then fixed to channel section with 25 mm drywall screws at 230 mm centre. Screw fixing is done mechanically with drill machine & suitable attachment. Finally square & tapered edges joints of the boards are jointed & finished so as to have flush look which includes filling finishing with jointing compound, joint paper tape & two coats of Drywall top coat suitable for Gypboard (as per recomended practices of India Gypsum Limited). |
| 68 | Providing & fixing 15mm thick densified tengular edged eco friendly light weight Calcium Silicate false ceiling tiles (like Aerolite Brand or Equivalent) of approved texture Spintone/Cosmos/Fine Fissured or equivalent of size 595mm x 595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per square metre. including both side) consisting of main \\"T\\" runner suitably spaced at joints to get required length & of size 24x38mm made from 0.33mm thick (minium) sheet, spaced 1200mm center to center, & cross \\"T\\" of size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size on a Perimeter wall angle precoated steel of size 600x600mm, resting on periphery walls/ partitions (24x24x300mm) made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm & laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture light fittings, fixture, smoke detectors etc., wherever required. Main \\"T\\" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to celing using with 12.5mm dia and 50mm long dash fastners, level clips of size 85x30x0.8mm, spaced at 1200mm center to center along main \\"T\\" bottom exposed with 24mm of T-section shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc. complete. (As Directed by Engineer in Charge) Note: Only Calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having are less than 0.30 sqm. The Calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection>85% non-combustible as per B.S.476 part IV, 100% humidity resistance & also having thermal conductivity 0.043 w/m 0 KC. Hospitals, Offices & Commercial Buildings, Auditoriums & Cinema Hall, Educational Institutions, R&D Centers, Studios, Laboratories, Library, Canteen |
| 69 | 10.00 PLASTERING AND FINISHING WORKS12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 70 | 6mm cement plaster to ceiling 1: 4 (1 cement : 4 fine sand) |
| 71 | Neat Cement punning |
| 72 | Extra for providing & mixing water proofing material proportion recommended by the manufacturers |
| 73 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) & top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge12mm cement plaster 1:4 (1 cement : 4 sand) |
| 74 | 12mm thick moulded cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand) cm per meter |
| 75 | Removing white or colour wash by scrapping, sand papering & preparing surface smooth including necessary repairs to scratches etc. complete |
| 76 | Applying one coat of distemper primer of approved brand & manufacture on wall surface |
| 77 | Applying priming coat with ready mixed primer of approved brand & manufacture on wood work complete |
| 78 | Applying priming coat with ready mixed primer of approved brand & manufacture on steel work |
| 79 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. |
| 80 | Painting one or more coats with superior quality ready mixed paint of wood work of approved brand & manufacture in all shades on old work to give an even shade. |
| 81 | Painting three or more coats with acryllic exterior paint of approved brand & manufacture (such as weather shield, Apex) including applying one coat of cement primer & one coat of surface treatment etc. complete, At all heights from ground level |
| 82 | Wall painting (two or more coats) with plastic emulsion paint of approved brand & manufacture on new work to give an even shade |
| 83 | Providing & applying white cement based putty of average thickness 1.00mm of approved brand & manufacturer, over the plastered wall surface to prepare the surface even & smooth complete |
| 84 | 11.00 DISMANTLING DEMOLISHING & REPAIRS WORK Repairs to plaster in patches of 2.5 sq.m. & under including cutting the patch in proper shape & preparing & plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead, With cement mortar 1:4 (1 cement : 4 fine sand) |
| 85 | Demolishing R.C.C. work including stacking of steel bars & disposal of unserviceable within 50 mts. Lead |
| 86 | Demolishing brick work in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. Lead |
| 87 | Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. Lead |
| 88 | Dismantling doors, windows & clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete & staking within 50 mt. Lead Of area 3 sq.m. and below |
| 89 | Dismantling doors, windows & clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete & staking within 50 mt. Lead Area beyond 3 sq.m. |
| 90 | Dismantling the tile work in floors & roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm. |
| 91 | Removing & refixing of door/window shutters paneled or paneled & glazed including replacing of existing hionges chiseling etc complete as directed by Engineer- in – chargBelow 1 Sq.m area |
| 92 | Removing & refixing of door/window shutters paneled or paneled & glazed including replacing of existing hionges chiseling etc complete as directed by Engineer- in – chargAbove 1 Sq.m area |
| 93 | Dismantling the existing light, fan, bell, clock, independent plug point, wiring including circuit mains of all types along with accessories etc. complete as per specification no. WG-DM/PW |
| 94 | 11.00 PLUMBING & SANITATION WORKSProviding & fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap & union complete, including cutting & making good the walls where requiredFlat back wash basin size 550 x 400mm with a single 15 mm C.P. brass pillar taps |
| 95 | Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws 600 x 20 mm size |
| 96 | Providing & fixing toilet paper holderC.P. Brass |
| 97 | Providing & fixing liquid soap container with C. P. brass lid & brackets fixed to wooden cleats with C. P. brass screwsGlass container |
| 98 | Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw |
| 99 | Providing & fixing brass full way valve (heavy) duty with wheel of approved quality 25 mm nominal bore |
| 100 | Providing & fixing brass full way valve (heavy) duty with wheel of approved quality 40 mm nominal bore |
| 101 | Providing & fixing brass full way valve (heavy) duty with wheel of approved quality 65 mm nominal bore |
| 102 | Providing & fixing ball valve (brass) of approved quality High pressure with PVC floats20 mm nominal bore |
| 103 | Providing & fixing P.V.C. connection pipe with brass unions 15 mm nominal bore45 cm (18”) length |
| 104 | Providing & placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark & conforming to I S 12701; 1996500 lit. capacity |
| 105 | Providing & fixing square-mouth S.W. gully trap grade ‘A’ complete with C.I. grating brick masonry chamber & water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design150 x 100 mm size –P or S type |
| 106 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement : 5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement & making channels in cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design Inside size 90 x80 cm & 45 cm deep including C.I. cover with frame (light duty) 455 x610mm internal dimensions total weight of cover ad frame to be not less than 38 kg. (weight of cover 23 kg. ) |
| 107 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement : 5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement & making channels in cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover & frame to be not less than 38 kg. (weight of cover 23 kg) |
| 108 | Making connection of drain or sewer line with existing manholes including braking into & making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement & making necessary channels for the drain etc. completeFor pipe 100 to 150mm dia |
| 109 | Providing & fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed110 mm dia |
| 110 | Providing & fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed75 mm dia |
| 111 | Providing & fixing rigid PVC bend (approved make) for SWR pipes including lubricating etc. complete bend with door110 mm dia |
| 112 | Providing & fixing rigid PVC bend (approved make) for SWR pipes including lubricating etc. complete bend with door75 mm dia |
| 113 | Providing & fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door110 mm dia |
| 114 | Providing & fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door75 mm dia |
| 115 | Providing & fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door110 mm dia |
| 116 | Providing & fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door75 mm dia |
| 117 | Providing & fixing double “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door 110 mm dia |
| 118 | Providing & fixing double “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door 75 mm dia |
| 119 | Providing & fixing nahani trap of rigid PVC (approved make) for S.W.R. pipes including lubricating etc complete, without door110 mm dia |
| 120 | Providing & fixing U.P.V.C. pipe clips (approved make ) for S.W.R. Pipes110 mm dia |
| 121 | Providing & fixing U.P.V.C. pipe clips (approved make ) for S.W.R. Pipes75 mm dia |
| 122 | Providing & fixing R.P.V.C. vent cowl 75 mm dia |
| 123 | Providing & fixing NICKEL chrome plated copper alloy Fancy Pillar Cock rocket type Jaquar make or equivalent. Confirming to IS 8931;199315mm nominal bore |
| 124 | Providing & fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent15mm nominal bore |
| 125 | Providing & fixing NICKEL chrome plated copper alloy Fancy two way long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;199315mm nominal bore |
| 126 | Providing & fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mm Jaquar make or equivalent15mm nominal bore |
| 127 | Providing & fixing NICKEL chrome plated copper alloy Fancy wall mixer with 115mm long bend pipe for connection to over head shower Jaquar make or equivalent. Confirming to IS 8931;1993 Wall mixer with 115 mm long bend pipe for connection to over head shower |
| 128 | Providing & fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of the Engineer-incharge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases & making good the walls etc15mm nominal bore |
| 129 | Providing & fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of the Engineer-incharge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases & making good the walls etc20mm nominal bore |
| 130 | Providing & fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of the Engineer-incharge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases & making good the walls etc25mm nominal bore |
| 131 | Providing & fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot & cold water supply includng all CPVC plain & brass threaded fittings CPVC solvent cement, trenching, refilling & testing of joints complete as per firection of the Engineer in charge.(External work (heavy duty SDR 11 pipe) 20mm nominal bore |
| 132 | Providing & fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot & cold water supply includng all CPVC plain & brass threaded fittings CPVC solvent cement, trenching, refilling & testing of joints complete as per firection of the Engineer in charge.(External work (heavy duty SDR 11 pipe) 25mm nominal bore |
| 133 | Providing & fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot & cold water supply includng all CPVC plain & brass threaded fittings CPVC solvent cement, trenching, refilling & testing of joints complete as per firection of the Engineer in charge.(External work (heavy duty SDR 11 pipe) 40mm nominal bore |
| 134 | Proving & fixing white vitreous china Wall Hung type (European Type) water closet with seat & lid with C.I. brass hinges & rubber fittings with flush valve nelson/similar fully chromium plated with stop cock, wall flanges, flush pipe or elbow & vaccum breaker coupling etc. including chair bracket/rag bolts, cutting & making good the walls & floors where required & concealed seat support - W.C. Pan with white plastic seat & lid |
| 135 | Providing & fixing white vitreous china flat back Large lipped front urinal basin of 590x375x390mm size with Urinal Valve Auto closing system with built in control cock & wall flange with fittings, spreader, R.S. or C.I. brackets, standard size C.P. Brassl flush pipe & spreaders with C. P. brass unions & C. P. Brass clamps with waste fitting as per IS 2556, PVC trap with outlet grating & other couplings in CP Brass complete, including painting, fittings, cutting & making good the walls & floors where required. - Range of one urinal basin |
| 136 | Providing & fixing bevelled edge mirror of superior glass (5mm thk) of approved Quality, shape & size complete with CP brass screws and washers, Cleats, CP studs etc Complete |
| 137 | Providing & fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone & making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top & bottom slabs completeOverall size 535mmx460mm (21\\"x18\\") bowl size 460mmx380mmx200mm (18\\"x 15\\"x 8\\") depth 200 mm. Glossy. 1.0mm thk |
| 138 | Providing & fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) & wall hook of approved quality confirming to IS standards |
| 139 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter & similar location in marble/Granite/Cuddapah stone work, including necessary holes for pillar taps etc. including moulding, rubbing & polishing of cut edges etc. complete |
| 140 | 12.00 MISCELLANEOUS WORKSProviding anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building : Post construction |
| 141 | High strength, dual-shrinkage compensated, micro-concrete for concrete repairs. Providing & laying which is duel shrinkage-compensated, cementitious micro-concrete, high strength, high flow, single component cementitious formulation. The repair micro-concrete shall have compressive strength minimum of 55 MPa at 7 day & 65 MPa at 28 days. The repair mortar shall not require polymer bonding agent as primer. All scaffolding, ladders, supporting materials etc. complete. Rates shall be inclusive of all labour, materials, tools & plant etc. complete |
| 142 | GROUTS for Crack Injection Grouting Ultra-fine cementitious single component crack injection for structural repairs. Providing & supplying Ultra-fine cementitious grout Alccofine 1109SR manufactured by M/s Counto Micro-fine Products Pvt Ltd, Goa or equivalent. Material should comply to IS 14343 forMarsh Cone Viscosity of 35 to 45 seconds, shall have the Particle Size Distributionwith d95 <12 microns & minimum compressive strength of grout more than 30 MPa at 7 days. Water to grout powder ratio should not be more than 0.6 for marsh cone viscosity & compressive strength test |
| 143 | ELECTRICAL WORKS14.00 INTERNAL WIRINGWiring for light point/fan point/exhaust fan point/call bell point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit (medium) with modular switch, modular plates, suitable size modular GI box of specified category & earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as requiredGroup C -- with Cat B Modular Accessories |
| 144 | Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC(medium) conduit of appropriate size as required2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit) |
| 145 | Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC(medium) conduit of appropriate size as required2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit) |
| 146 | Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC(medium) conduit of appropriate size as required2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit) |
| 147 | Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC(medium) conduit of appropriate size as required2 x 6 sq.mm + 1 x 6 sq.mm earthwire (25mm Conduit) |
| 148 | Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC(medium) conduit of appropriate size as required4 x 10 sq.mm + 2 x 10 sq.mm earthwire (32mm Conduit) |
| 149 | Wiring for group controlled light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit (medium) & earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
| 150 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required5/6 A switch Cat A |
| 151 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required15/16 A switch Cat A |
| 152 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required3 pin 5/6 A socket outlet Cat A |
| 153 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required6 pin 15/16 A socket outlet Cat A |
| 154 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as requiredTelephone socket outlet Cat A |
| 155 | Supplying & fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc. as requiredCat B |
| 156 | Supplying & fixing following size modular GI box along with modular base & cover plate for modulator switches in recess etc. as required1 or 2 Module (75 mm x 75 mm) Cat A |
| 157 | Supplying & fixing following size modular GI box along with modular base & cover plate for modulator switches in recess etc. as required4 Module (125 mm x 7 mm) Cat A |
| 158 | Supplying & fixing following size modular GI box along with modular base & cover plate for modulator switches in recess etc. as required6 Module (200mm x 75 mm) Cat A |
| 159 | Supplying & fixing following size modular GI box along with modular base & cover plate for modulator switches in recess etc. as required8 Module ( 125 mm x 125 mm) Cat A |
| 160 | Supplying & fixing following size modular GI box along with modular base & cover plate for modulator switches in recess etc. as required12 Module (200 mm x 150 mm) Cat A |
| 161 | 15.00 TELEPHONE & DATA NETWORKINGSupplying & fixing of following sizes of rigid PVC conduit along with accessories in surface(medium)/recess(heavy) including cutting the wall & making good the same in case of recessed conduit as required25 mm |
| 162 | Supplying & drawing/fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/DOT approved, with GI saddles on wall or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required2 Pair |
| 163 | Supplying, installing, testing & commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner & suitable for following capacity of pairs, including Krone makemodules, crimping & terminations, etc. complete as required.20 Pair |
| 164 | Supplying & drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as requiredCat 6 |
| 165 | Supplying, installation & testing of suitable size modular GI box , modular plate & cover complete with RJ-45 connector (modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as requiredCat B |
| 166 | Supplying & fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC |
| 167 | Supplying, fixing & configuring 24 Ports + 4 SFP combo, layer 2, GB managed ethernet switch, with web view compliant with IEEE 802.3 standards erected in provided rack complete |
| 168 | Supplying, fixing & configuring broadband router with all accessories on provided rack |
| 169 | Supplying & fixing Cat 6, 24 port patch panel with keystone jacks compliant with ANSI/TIA/EIA 568.C.2 & ISO/IEC 11810 complete as per specification no. WG-NAS/PP |
| 170 | Supplying & fixing 9U wall mount rack (Dimension-DxWxH – 500x550x480 mm) as per specification no. WG-NAS/RAK |
| 171 | 16.00 DB & MCBSupplying & fixing following way SPN sheet steel MCB distribution board 240 V on surface/recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized & powder painted including earthing etc. as required (but without MCB/RCCB/Isolator)12 way double door Cat A |
| 172 | Supplying & fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized & powder painted including earthing etc. as required (but without MCB/RCCB/Isolator)8 way (8+24), double door, Horizontal type Cat A |
| 173 | Supplying & fixing 6 A to 32 A, C series MCB suitable for lighting & other loads of following poles in the existing MCB DB complete with connections testing & commissioning etc as requiredSP, Cat B |
| 174 | Supplying & fixing 6 A to 32 A, C series MCB suitable for lighting & other loads of following poles in the existing MCB DB complete with connections testing & commissioning etc as requiredSPN, Cat B |
| 175 | Supplying & fixing 6 A to 32 A, C series MCB suitable for lighting & other loads of following poles in the existing MCB DB complete with connections testing & commissioning etc as requiredTPN, Cat B |
| 176 | Supplying & fixing SP blanking plate in the existing MCB DB complete as required |
| 177 | 17.00 LIGHT FIXTURE & FANSSupplying & erecting LED square/circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED |
| 178 | Supply & fixing LED 36W, RC 360 B-4000KV I60W 60PSUOD 36W 600X600 LED PENAL LIGHT Philips LED |
| 179 | Supply & fixing 5W 4000 K 2054 270 LUMEN OUTPUT HAVELLS LED LIGHT |
| 180 | Supplying Pedestal fan 400 mm. 230 Volts 50 cycles oscillating type complete with guard & regulator 3 mtrs. of flexible wire and hand shield type 3 pin plug top |
| 181 | Supplying & erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, Max. Energy Consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control, Temperature Rise of Max. 40 deg.C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF |
| 182 | Supply & erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessoriesCat A |
| 183 | 18.00 HVACSupplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ SAC |
| 184 | Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. AP-AC/ SAC |
| 185 | Carrying out core cutting of size 3\\" to 5\\" dia x 15\\" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner & finishing the site as original |
| 186 | Supplying, laying/fixing, testing & commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply & return piping of suitable gauge (hard copper pipe for liquid main line & soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators & fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance & ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete |
| 187 | Supplying, laying/fixing, testing & commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply & return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators & fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance & ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete |
| 188 | 19.00 UPSSupplying, erecting, testing & commissioning of 6 kVA capacity on line pure sine wave,PWM,IGBT based UPS with 0.9 to unity output pf ,single phase input & 1 phase output complete with all protections as per specification no. APUPS (Without batteries) |
| 189 | Supplying & erecting 12 V/42Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete |
| 190 | 20.00 INTERIORS, FURNITURE WORKS & ASTHETICSVERTCAL BOOK STORAGE (partly closed partly open): Providing, fabricating & installing a storage rack (dimensions as per drawing) in position made out of 19mm thk BWP 710 marine plywood except back which is made out of 6mm thk BWP 710 marine plywood. All Exposed surfaces finished with 1.0mm thk Laminate of approved shade, All inside surfaces to be finished with 0.7mm thk fabric shade/liner laminate. The storage has to be partly closed with plywood shutters, properly hinged at the supports. Shutters fitted with SS hinges, Multipurpose lock, heavy duty brushed stainless steel 'D' Handles (6\\") etc. Multipurpose lock, Handles etc. complete as per drawing, for example consider size 4.00m x 2.50m |
| 191 | VERTCAL BOOK STORAGE (fully closed with 19mm ply): Providing, fabricating & installing a storage rack (dimensions as per drawing) in position made out of 19mm thk BWP 710 marine plywood except back which is made out of 6mm thk BWP 710 marine plywood. All Exposed surfaces finished with 1.0mm thk Laminate of approved shade, All inside surfaces to be finished with 0.7mm thk fabric shade laminate. 19mm thk ply doors properly hinged at the supports fitted with SS hinges, Multipurpose lock, heavy duty brushed stainless steel 'D' Handles (6\\") etc. Multipurpose lock, Handles etc. complete as per drawing, for example consider size 6.00m x 2.50m |
| 192 | STORAGE CUPBOARD: Providing, fabricating & installing storage cupbord of L 1500MM, H 750MM & W 400MM in position made out of 18mm thk prelaminated particle board with 2mm pvc edge bending. Shutters fitted with SS hinges, Multipurpose lock, heavy duty brushed stainless steel 'D' Handles (6\\") etc. Multipurpose lock, Handles etc. complete as per drawing |
| 193 | CABIN WORKING TABLE: Providing, fabricating & installing a working table desgin as per render (Size; L 1500MM x W 750MM x H 750MM) in position made out of 19mm/12mm/6mm thk BWP 710 marine plywood. All Exposed surfaces finished with 1.0mm thk Laminate of approved shade, All inside surfaces to be finished with 0.7mm thk fabric shade/liner laminate. |
| 194 | WORKING TABLE: Providing, fabricating & installing a working table desgin as per render in position made out of 19mm/12mm/6mm thk BWP 710 marine plywood. All Exposed surfaces finished with 1.0mm thk Laminate of approved shade, All inside surfaces to be finished with 0.7mm thk fabric shade/liner laminate. |
| 195 | RECEPTION WORKING TABLE: Providing, fabricating & installing a reception table desgin as per render (dimensions as per drawing) in position made out of 19mm/12mm/6mm thk BWP 710 marine plywood. All Exposed surfaces finished with 1.0mm thk Laminate of approved shade, All inside surfaces to be finished with 0.7mm thk fabric shade/liner laminate, for example consider size 2.50m x 0.75m |
| 196 | UNDER TABLE STORAGE CABINETS WITH ROLLERS: Providing, fabricating & installing a storage cabinet supporting on rollers desgin as per render (Size; L 400MM x W 450MM x H 600MM) in position made out of 19mm/12mm/6mm thk BWP 710 marine plywood. All Exposed surfaces finished with 1.0mm thk Laminate of approved shade, All inside surfaces to be finished with 0.7mm thk fabric shade/liner laminate. 19mm thk ply doors properly hinged at the supports fitted with SS hinges, Multipurpose lock, heavy duty brushed stainless steel 'D' Handles (6\\") etc. Multipurpose lock, Handles, channels etc. complete as per drawing |
| 197 | VENEER FINISHED L SHAPED DIRECTOR'S CABIN TABLE: Providing, fabricating & installing a working table design/dimension as per render in position made out 19mm/12mm/6mm thk BWP 710 marine plywood, finished with Vineer polish, with requied hardware fittings. Size: 2.00mx0.60mx0.60m |
| 198 | PANELLING FOR CLOSING EXISTING OPENINGS WITH PLYWOOD FINISHED WITH LIMINATE: Providing & fixing 19mm ply fixed with AL grid 60x60cm over existing openings to be closed including frame work if necessary, with required hardware etc. complete, finished with 1mm thk laminate |
| 199 | PANELLING FOR CLOSING EXISTING OPENINGS WITH MDF SHEET FINISHED WITH DOCO PAINT: Providing & fixing MDF sheet over existing window openings with required hardware etc. complete, finished with doco paint |
| 200 | 2 SEATER SOFA: Providing & placing in position 2\\" seater sofa 1270Lx760Dx710H of hardwood frame PU foam of 32kg/m3 density placed on webbing belt, further covered with velvet fabric as per design shown in render having 25000 rubs & above martindel |
| 201 | 2+1 SEATER SOFA FOR DIRECTOR'S CABIN: Providing & placing in position 2+1 seater sofa 1270Lx760Dx710H of hardwood frame PU foam of 32kg/m3 density placed on webbing belt, further covered with velvet fabric as per design shown in render having 25000 rubs & above martindel |
| 202 | CENTRE TABLE: Providing, fabricating & installing a center table desgin/dimension as per render in position made out of Teak wood frames, finished with polish |
| 203 | SIDE TABLE: Providing, fabricating & installing a center table desgin/dimension as per render in position made out of Teak wood frames, finished with polish |
| 204 | HIGH BACK CHAIRS: Providing & placing in position high back chairs having head rest with 100% polyester fabric, derived BIFMA Compliant, knee tilt syncro 4 mechanism, Adjsutable External lumbar support, Nylon base with PU castors, class 3 DIN gas lift, height adjustable arm rest complete with all necessary hardware. HBC |
| 205 | WORK STATION CHAIRS: Providing & placing in position workstation chairs with medium back with mesh/ HR Foam seat, derived BIFMA Compliant, syncro 4 mechanism, Nylon base with PU castors, class 3 DIN gas lift, height adjustable arm rest complete with all necessary hardware. WC |
| 206 | LEATHERATE HIGH BACK CHAIR D'S CABIN: Providing & placing in position leatherate high back chairs having head rest with steel base. HBC |
| 207 | ROLLER BLINDS: Providing & fixing in position roller blinds of approved make, colour, shade of varying length, approved fabric with aluminium extruded rail powder coated in white. Control unit to be made of high strength reinforced plastic. Roller tube to be anodised extruded tube of high strength alloy, including all necessary fittings & fixtures like idler, head rail, control unit, roller tube, bottom rail, operating chain, fixing brackets, clamps, etc. complete. All the materials shall be of approved make. All works complete as per the drawing /image, specs & direction of the engineer in charge |
| 208 | PODIUM TABLE: Providing, fabricating & installing a reception table desgin as per render (dimensions as per drawing) in position made out of 19mm/12mm/6mm thk BWP 710 marine plywood. All Exposed surfaces finished with 1.0mm thk Laminate of approved shade, All inside surfaces to be finished with 0.7mm thk fabric shade/liner laminate. |
| 209 | MEETING ROOM CHAIRS WITH WRITING FLAP: Providing & placing in position workstation station chairs with writing flap |
| 210 | WOODEN PODIUM: Providing & placing in position wooden podium |
| 211 | FIXED 3\\" PLY PARTITIONS FULL HEIGHT: Providing & fixing in position, full height ply partitions made of treated salwood framework of size 38mm x 50mm having grid spacing at 600mm x 600mm centre to centre both ways & covered with 12mm thick Marine BWP plywood on both sides of framework & finished with 1mm thick laminate of approved color & texture. The framework shall be properly screwed to the walls, ceiling & floor & plywood shall be screwed to the framework. The space between the framework grid shall be filled with glass wool for sound insulation. Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. All material shall be of approved make. All works complete as per the drawing, specs & direction in charge. |
| 212 | FULL HEIGHT TOUGHNED GLASS PARTITION WITH WOODEN FRAME: Providing & fixing in position, full height toughned glass partition fixed to the floor & ceiling, encased in a wooden frame. |
| 213 | 12MM THK TOUGHNED GLASS DOOR 3' x 7': Providing & fixing 12 mm thick frameless toughened glass door shutter including providing & fixing top & bottom pivot & spring type fixing arrangement & making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer. The glass door fixing includes necessary fittings like, floor spring, D type handles, loacking system etc. |
| 214 | PARTLY GLASS PANELLED & PARTLY SOLID PARTITION WITH LAMINATE FINISH: Providing & fixing in position, full height partly glass panelled & partly solid partition made of treated salwood framework of size 38mm x 50mm having grid spacing at 600mm x 600mm centre to centre both ways & covered with 12mm thick Marine BWP plywood on both sides of framework & finished with 1mm thick laminate of approved color & texture. The framework shall be properly screwed to the walls, ceiling & floor & plywood shall be screwed to the framework. The space between the framework grid shall be filled with glass wool for sound insulation. The partition will have an opening as per the height specified in the drawing. Glass of thickness 12mm will be fixed in the opening with wooden beading of size 38mm x 12mm on both sides. Wooden beadings will be finished in 3 or more coats of melamine polish (glossy/matt) including final coat of buffing till the required finish is achieved. All hifdden framework to be painted with black japan paint. Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. All material shall be of approved make. Al works complete as per the drawing, specs & direction in charge. |
| 215 | 12MM WALL PLY PANELLING: Providing, fabricating & installing wall panelling, panelling for AC, in position made out of 12mm thk BWP 710 marine plywood front panel fixed on grid finished with 1.0mm thk Laminate of approved shade & brand |
| 216 | 12MM WALL PLY PANELLING WITH FLUTED PANELS: Providing, fabricating & installing wall panelling, in position made out of 12mm thk BWP 710 marine plywood front panel fixed on grid finished with 1.0mm thk Laminate of approved shade & brand, finally finished with fluted wooden panels |
| 217 | DOUBLE PATTI: Providing, fabricating & installing window frame patti with 12mm thk BWP 710 marine plywood finished with 1.0mm thk Laminate of approved shade |
| 218 | SINGLE PATTI: Providing, fabricating & installing window frame patti with 12mm thk BWP 710 marine plywood finished with 1.0mm thk Laminate of approved shade |
| 219 | GREEN PLANTER: Supplying & fixing in position approved artificial Green plant with metal/pvc/fibre pot. All the material shall be of approved make & as per the selection by PMC/client. |
| 220 | STAINLESS STEEL DUSTBIN: Providing & placing in position 16 gauge pedal stainless steel dust bin of Grade 304 cylindrical with cover (300mm dia x 650mm ht). All material shall be of approved make. All works complete as per the drawing, specs, image & direction of the site incharge |
| 221 | PICTURE FRAME: Supplying & fixing in position approved canvas painting with synthetic frame & lamination. The details need to be as per the instructions of Engineer in charge. All material shall be of approved make. All works complete as per the drawing, specs, image & direction of the site incharge |
| 222 | NOTICE BOARD: Supplying & fixing in popsition Notice Board of size L 1200mm x H 900mm made of Aluminium frame with Acrylic shutter including 12mm thick soft board with blazer cloth top fixed in frame with clip fitting with all stainless steel hardwares such screws, lockong arrangements etc. & making arrangements for fixing on wall all complete as per design. All material shall be of approved make. All works complete as per the drawing, specs, image & direction of the site incharge, |
| 223 | WALL CLOCK: Supply & fixing in position approved make, approved colour wall clock circular or square (min one side 250mm) quartz with bold numbers, 3 hands. |
| 224 | SIGNAGES: Providing & fixing Foam Board made sinages |
| 225 | 16\\"x16\\" CUSIONS: Providing & placing in position cushions filled with hollw micro fiber fillings maintaining the asthetics of the design, further cushions covered with fabric of 250 GSM |
| 226 | Providing & fixing bottom spigot, 12mm clear toughened glass staircase handrail |
| 227 | Providing & fabricating a stage with 19mm/12mm/6mm ply with mS frame structural grid, Height of the stage can be considered 300mm, L & W as per drawing |
| 228 | Providing & fixing wooden staircase planks on fabricated stringer beam type staircase, Thread=0.3m, Riser=0.15m, Length of Steps=1.1m, Landing=2.2x1.1m, structural steel members for fabrication will be consideed saperate in respective item |
| 229 | Applying pest control treatment for domestic pests like rats, rodents, cockroches, ants etc. for the demarketed renovation area. Rate includes for cocroches it is 1 service per month & for rodents & rats rate includes 2 services per month, as per PCI minimum 3 months service is recommended |
| 230 | Providing & laying 20mm thk cement board over fabricated floor for mezzanine interlocked with self taping screws Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender