Tender For Providing And Fixing Of Fountain At Ut State Guest House Ii, Sector 18 A, Chandigarh.
Tender Value
12.26 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
3 days left
EMD
24533
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Fixing Of Fountain At Ut State Guest House Ii, Sector 18 A, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, installation, testing and commissioning of the DYNAMIC FOUNTAIN as per the approved drawings / specification comprising of following components |
| 2 | PIPE MANIFOLD |
| 3 | Cluster / Columnar Jet 1 no. made from Brass ( Chrome Plated ) / SS 304/316 with several small SS/CP Brass Stream jetNozzles, surrounded by 800 - 1000 mm dia inner ring and 1100 - 1300 mm dia outer ring made from non corrosive extruded aluminium alloy, Brass ( Chrome Plated ) or SS 304/316 ball joint nozzles fitted on Inner / outer ring 100 to 150 mm c/c, flow control Valves, Galvanized Steel Manifold, Mounting Stands, distribution pipe network, balancing valves complete with supply, fabrication, installation, testing & commissioning to the satisfaction of EIC, as per approved design and drawings to give the required performance.LED LIGHTING |
| 4 | LED LIGHTING |
| 5 | Supply, installation, testing and commissioning of the 48 no's app or as per approved design, RGB LED underwater fountain lights 9W rating, operating voltage 12V, Stainless Steel Body with IP 68 protection, compatible with RGB Controller & Power Supply |
| 6 | Supply, Installation, Testing and Commissioning of RGB Controller for LED Lights to produce multiple color combinations / color changing effects, brightness adjustment and sequencing complete to the satisfaction of EIC. |
| 7 | Supply, Installation, Testing and commissioning of LED Profile lighting of desired color for lighting of walls of water body. |
| 8 | PUMPS / VFD |
| 9 | Supply, Installation, Testing and commissioning of Openwell Submersible Pumps ( 5 HP - 1no., 4 HP- 1no., 3 HP- 1no. ) make Grundfoss / Xylem / Armstrong complete with cable of required size from VFD / Panel, necessary mounting / supporting arrangement and all required accessories of following capacity |
| 10 | Supply, Installation, Testing and commissioning of Variable Frequency Drive suitable for variable speed control for pump operation, soft start/stop functionality, with built in protection for overload, short circuit, having digital display for operating parameters complete suitable for Pumps as mentioned above i.e. ( 5 HP / 4 HP / 3 HP ) |
| 11 | Electrical Panel for VFD's and RGB , Controller ( PLC ) |
| 12 | Supply, Installation, Testing and commissioning of suitably designed and approved electrical control panel for housing and Controller ( PLC - Programmable Logic Controller ) for VFD's and RGB lighting Controllers,MCB's, Contractors, Relays, Incomer MCCB/MCB, selector switch complete to the satisfaction of EIC. |
| 13 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. |
| 14 | All kinds of soil |
| 15 | CONCRETE WORK |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level. |
| 17 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived fromnatural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 18 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived fromnatural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 19 | REINFORCED CEMENT CONCRETE |
| 20 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level |
| 21 | 1:1½:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 22 | Centering and shuttering including shuttering, propping etc. and removal of form to:- |
| 23 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 24 | Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete |
| 25 | Cold twisted bars |
| 26 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 27 | Granite Work |
| 28 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 29 | Size of Tile 500x500 mm |
| 30 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 31 | Polished Granite stone slab of olour Black, Cherry/Ruby Red or equivalent |
| 32 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc |
| 33 | 50 mm dia nominal bore |
| 34 | 65 mm dia nominal bore |
| 35 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 36 | 50 mm nominal bore |
| 37 | 65 mm nominal bore |
| 38 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : |
| 39 | 50 mm nominal bore |
| 40 | 65 mm nominal bore Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender