Tender For Routine Maintenance Of Public Health Work At Punjab And Haryana High Court, Sector-1, Chandigarh. (Ch To 2215-Non Plan 2026-27.)
Tender Value
5.43 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
1 days left
EMD
10874
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Routine Maintenance Of Public Health Work At Punjab And Haryana High Court, Sector-1, Chandigarh. (Ch To 2215-Non Plan 2026-27.)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : .4.1 |
| 2 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) .4.1.3 |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: .6.1 |
| 4 | Cement mortar 1:4 (1 cement : 4 coarse sand) .6.1.1 |
| 5 | 12 mm cement plaster of mix .13.1 |
| 6 | 1:4 (1 cement: 4 fine sand) .13.1.1 |
| 7 | Providing and fixing white vitreous china water closet squatting pan (Indian )Make: CERA .17.13 |
| 8 | Orissa pattern W.C. pan of size 580x440 mm .17.13.2 |
| 9 | Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan .17.15 |
| 10 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. .17.16A |
| 11 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete. .17.20. |
| 12 | White solid plastic seat with lid .17.20.1 |
| 13 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. .17.28 |
| 14 | Flexible pipe .17.28.2 |
| 15 | 32 mm dia .17.28.2.1 |
| 16 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Internal work - Exposed on wall .18.10. |
| 17 | 20 mm dia nominal bore .18.10.2 |
| 18 | 50 mm dia nominal bore .18.10.6 |
| 19 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete pressure, with plastic floats complete : .18.18 |
| 20 | 15 mm nominal bore .18.18.1 |
| 21 | 20 mm nominal bore .18.18.2 |
| 22 | 25 mm nominal bore .18.18.3 |
| 23 | Providing and fixing uplasticised PVC connection pipe with brass unions : .18.21 |
| 24 | 45 cm length .18.21.2 |
| 25 | 15 mm nominal bore .18.21.2.1 |
| 26 | Providing and placing on terrace (at all floor level) polythene water storage tank, ISI -12701) marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overlfow pipes but without fittings and the base support for tank. Make (SPL) .18.48 |
| 27 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : .18.49 |
| 28 | 15 mm nominal bore .18.49.1 |
| 29 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) .18.53 |
| 30 | 15 mm nominal bore Make: JAL .18.53.1 |
| 31 | Providing and fixing PTMT bib cock of approved quality and colour. .18.54 |
| 32 | 15mm nominal bore, 86 mm long, weighing not less than 88 gms Make: PARYAG .18.54.1 |
| 33 | Providing and fixing PTMT, ball cock of approved quality and colour. .18.62 |
| 34 | 15 mm nominal bore, 105mm long, weighhing not less than 138 gms Make: PARYAG .18.62.1 |
| 35 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards .NSR |
| 36 | 15 mm nominal bore . |
| 37 | Providing and fixiang 5mm thick looking glass with 40mm fancy wooden/PVC frame with thick hard board ground fixed with wooden cleats with screws and washers complete in all respects to the entire satisfaction of EIC.Make of glass . .NSR |
| 38 | Providing of urinal battery power bank alongwith replacement of AA duracell complete testing in the entire satisfaction of EIC of make Jaquar/ CERA/ Hindware .NSR |
| 39 | Providing and fixing of solenoid valve including urinal sensor of urinal make complete in testing and commisssioning to entire satisfaction of EIC make \\"Hindware\\" .NSR |
| 40 | Providing & fixing of Dura Cell AA including cost of opening of urinal sensor and cleaning of battery bank from rusting and testing in complete to the entire satisfaction of EIC. Qty as per 2nd Running Bill .NSR |
| 41 | Providing and fixing of urinal cell of 9 v as per site requrment complete after opening and testing urinal sensor complete in all respect. Make : DURA CELL .NSR |
| 42 | Providing and fixing of urinal cell of 6v as per site requirement complete after opening and testing urinal sensor complete in all respect. Make: DURA CELL .NSR |
| 43 | Providinga nd fixing of Hand Dryer lfash touch free made of stainless steel 304 grade make: Jaquar Model : Ak2807 or equivalent model of make: Cera/Hindware .NSR |
| 44 | Providing and fixing of C.P. Soap Dish Holder complete in all respects make Jaquar range Continental Model ACN-1131N or equivalent .NSR |
| 45 | Providing and fixing of Soap Dispenser with Glass bottle make Jaquar model no.AKP-35735P or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR |
| 46 | Providing and fixing C.P. angular stop cock complete in all respecst Make: Jaquar( Model Con-053KN) .NSR |
| 47 | Providing and fixing C.P. Bib cock complete in all resepct make Jaquar Model( CON-037KN) .NSR |
| 48 | Providing and fixing 32mm i/d C.P. Brass bottle trap for wash basin and sink complete in all respect and to the entire satisfaction of EIC : Make ESSCO) .NSR |
| 49 | Providing and fixing C.P. single towel rail 600mm long of jaquar continetal . .NSR |
| 50 | Providing and fixing of toilet ring round with round flange complete fixed into wall as per site make Jaquar . .NSR |
| 51 | Providing and fixing of CP Toilet Roll Holder without flap make Jaquar Model (CAN-1151N) Continental or equivalent model of Hindware/ Cera .NSR |
| 52 | Providing and fixing pressmatic urinal valve auto closing system with built in control cock & wall flange make Jaquar Model PRS-077 or equivalent .NSR |
| 53 | Providing and fixing CP Brass dome type waste coupling complete in all respect to the entire satisfaction of EIC .NSR |
| 54 | Providing and fixing glass shelf with front guard rail comnlete in all respect to the entire satisfactio of EIC make Jaquar model continental .NSR |
| 55 | Providing and fixing C.P. hand shower(health faucet) with 1 meter long easy flex tube in chrome finish & wall hgook complete in all respect Make Jaquar series ALD -573 complete in all respect .NSR |
| 56 | Providing and fixing PVC low level cistern fitting complete in all respect to the entire satisfactioon of Engineer-in-charge. Make: SuperNova .NSR |
| 57 | Providing and fixing C.P. grating 4\\" dia flanged type over existing floor traps with the help of white cement complete in all respect to the entire satisfaction of Engineer in charge .NSR |
| 58 | Providing and fixing wash basin with C.I. bracked 32mm CP brass waste of standard patter, including of fittings and brackets, cutting and making good the walls wherever required. Make: Cera .NSR |
| 59 | Providing and fixing (Snow white) urinal with fixing accessories, size 355 x 340 x 535 mm Make Jaquar model URS-WHT-13261 or equivalent model of Cera to the entire satisfaction of EIC complete in all respect .NSR |
| 60 | Providing and fixng of Urinal partition curved/ Rectangular shaped with frosted/ Toughened Glass of approved make Jaquar 8 mm thick of size 900 mm x 450 mm Make Jaquar model JSE-CHR-810VC 450 X to the entire satisfaction of EIC complete in all respect .NSR |
| 61 | Providing and fixing of extended wall hung EWC along with Cistern and soft close seat cover with twin flushing fittings complete in all respect Make: Cera .NSR Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender