Tender For Construction Of Mini Community Sanitary Complex Type-3 Girls Pues In Athipadi Panchayat Thandar Attu Block
Tender Value
6.84 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
11 days left
EMD
6900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruvannamalai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Mini Community Sanitary Complex Type-3 Girls Pues In Athipadi Panchayat Thandar Attu Block
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Mini CSC Type-3 Girls PUES in Athipadi panchayat Thandarampattu Block |
| 2 | Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil, hard stiff clay, black cotton soil, hard red earth,shales, murram, and earth muds with 50% fair sized boulders as per SS 20B for narrow foundation |
| 3 | Refilling and supply of gravel from approved quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete, |
| 4 | Plain Cement Concrete 1:4:8 (one cement, four sand and eight hard granite broken stone of 40mm size ISS gauge) for foundation and footing including mixing, placing, ramming ,finishing curing etc. complete in accordance with standard specification and as directed by the TWAD Board Officers. |
| 5 | Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc. |
| 6 | Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc. |
| 7 | RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc. |
| 8 | RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc. |
| 9 | Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. |
| 10 | Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. |
| 11 | Supply and fabrication of steel including cost and conveyance and all labour charges etc. complete. |
| 12 | Supplying steel Door D1 of size 0.75m x 2.10m as per standardspecification |
| 13 | Supplying, fabricating, erecting and fixing of stainless steel including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmentalofficers |
| 14 | Supplying, fabricating, erecting structural steel works |
| 15 | Supplying, fabricating, erecting and fixing of UV coated Poly carbonite sheet 10mm thick tubularbox section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. |
| 16 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug andchain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc. complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the ExecutiveEngineer before use on works). |
| 17 | Supplying Steel Door SD of size 1.20m x 2.10m as per standardspecification. |
| 18 | Supplying Water Closet IWC |
| 19 | Supplying and fixing in position Indian make white glazed earthenware squating type urinal of best quality and approved make including dismantling masonry, if necessary and re-doing the same to original condition, etc., complete complying with standardspecification. (The squatting urinal should be got approved by the Executive Engineerbefore use on works |
| 20 | Providing & applying 12 mm thick cement plaster in CM 1:5 (1 part of cement: 5 parts of sand) to walls internally in single coat at all levels to correct line and level including chicken wire mesh at all joints of brick and concrete surfaces with minimum overlap of 150 mm in all directions, scaffolding, rounding off or champhering of corners, offsets, fin/ bands, projections, etc. andcleaning of surface, raking out joints, roughening of surface, chiseling the undulated surface wherever necessary and curing |
| 21 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and evensurface. Any unevenness shall be made good by applying 1st coat |
| 22 | Paving the floor with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick |
| 23 | Dadooing walls Plain Galzed tiles of size 150x150x6mm including cost and conveyance of all charges etc |
| 24 | Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the wall rendering the walls smooth with necessary putty, brushes scaffolding arrangements, labour charges, etc., as per standard specification. |
| 25 | Painting two coats of newly plastered wall surface withready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification |
| 26 | 110mm pvc pipe |
| 27 | 110mm pvc bend |
| 28 | 110mm pvc tee |
| 29 | HDPE 2000 liters tank |
| 30 | Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil, hard stiff clay, black cotton soil, hard red earth,shales, murram, and earth muds with 50% fair sized boulders as per SS 20B for narrow foundation |
| 31 | Plain Cement Concrete 1:4:8 (one cement, four sand and eight hard granite broken stone of 40mm size ISS gauge) for foundation and footing including mixing, placing, ramming ,finishing curing etc. complete in accordance with standard specification and as directed by the TWAD Board Officers. |
| 32 | Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. |
| 33 | Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc. |
| 34 | RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc. |
| 35 | Supply and fabrication of steel including cost and conveyance and all labour charges etc. complete. |
| 36 | Providing & applying 12 mm thick cement plaster in CM 1:5 (1 part of cement: 5 parts of sand) to walls internally in single coat at all levels to correct line and level including chicken wire mesh at all joints of brick and concrete surfaces with minimum overlap of 150 mm in all directions, scaffolding, rounding off or champhering of corners, offsets, fin/ bands, projections, etc. andcleaning of surface, raking out joints, roughening of surface, chiseling the undulated surface wherever necessary and curing |
| 37 | Provision For Name board |
| 38 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender