Tender For Repairs And Renovation Of Vac Building , Residental Quarter At Nandgoan Tq Mul Ts No --------------------------------------------Rs 1222000/- Part A
Tender Value
12.22 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
1 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandrapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs And Renovation Of Vac Building , Residental Quarter At Nandgoan Tq Mul Ts No --------------------------------------------Rs 1222000/- Part A
BOQ
| Sl. No. | Item Description |
| 1 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.Spec.No.: As directed by Engineer in charge. |
| 2 | Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete.Spec.No.: As directed by Engineer- in-charge. |
| 3 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 4 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 6 | Providing internal cement plaster 12 mm thick in a single coat in cement mortar 1:4 to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of B.B.Masonry and concrete members complete. [2/BDL/2B,P NO-36] Spec.No.: Bd. L.2 Page Number 368 |
| 7 | Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring |
| 8 | Providing and laying Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.Bd. M-12 page One Number 385 |
| 9 | Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 10 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary Spec. No. : As directed by Engineer in charge. |
| 11 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 12 | Providing and applying plastic emulsion paint of approved quality ,colour and shade to old and new surfaces in two coat sincluding scaffolding,preparingthesurface.(excludingtheprimercoat)etc.complete.Spec. No. Bd.P.5 Page No. 413 |
| 13 | Providing and fixing M40 grade thick vibrated pull castor similar type concrete framewithch amfer conforming toI.S. 65241983 having 6mm dia. bars3Nos.Andstirrups@250mmc/c and fixinginwall with 6Nos of hold fast of 12mmdia bars 500mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm |
| 14 | Providing and fixing solid core flush door shutter in single leaf 32mm thick decorativetype of exterior grade asper detailed drawing sapprovedfaceveneers3mmthickonbothfacesorasdirected,allnecessarybeads,mouldingsandlipping,wrought ironholdfasts,chromiumplated fixtures and fastenings, with brassmortise lock, chromiumplatedhandles on both sides, and finishing with French Polish etc. complete. |
| 15 | Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.Bd.O.5 Page No. 405 |
| 16 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. |
| 17 | Providing and fixing fiber glass reinforce dpolyster door shutter 30mm thick as per IS14856(2000) (Reaffirmed2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete Spec. No. : As directed by Engineer incharge. |
| 18 | Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. |
| 19 | Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. |
| 20 | Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) Spec.No.: Specfications |
| 21 | Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 22 | Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. |
| 23 | Providing, laying and fixing C. P.V.C. pipe of 15 mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 24 | Providing, laying and fixing P.V.C. pipe of 25mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 25 | Providing, laying and fixing C.P.V.C. pipe of trenches 15 mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 26 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. Spec.No.: Bd.V.8/Page No.554 |
| 27 | Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete Spec.No.: Bd.V.9/Page No.555 |
| 28 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters |
| 29 | Removing the existing cement plaster of any thickness without causing dustnuisance and stacking the debris upto a distance of 50metres or spreading in thecompound and cleaning the site etc. complete. |
| 30 | Providing and laying in situ / ready mix controlled grade of M15 of trap /granite /quartzite /gneiss metal for RCC works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc. complete. (withOUT fully automatic micro processor based PLC withOUT SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand, excluding reinforcement) SPEC NO- BE59 a As directed by Engineer in charge. |
| 31 | Providing and fixing heavy duty interlocking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60millimeter thickness of having a strength of 400Kg/sq.m of approved quality and shape on abed of crushed sand of 25 to 30 millimeter thick including striking joint sand cleaning etc. complete. (using 100% crushed sand) spec no-Bd. M-12 page Number 385 |
| 32 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 to concrete or brick surface in all positions including scaffolding and curing complete. Spec.No.: Bd. L.1 Page Number 367 |
| 33 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. slab and landing as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.6 Page No. 300 and B.7, Page No.38 |
| 34 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hookingthe bars, binding with wires or tack welding and supporting as required complete. Bd.F.17, Page No. 306 |
| 35 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third ourse, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. |
| 36 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) |
| 37 | Providing and fixing mild steel grill work for windows, ventilators, etc. required kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.a) --------- do ---------- 20 Kg/Sqm. [1/BDU/1A,P NO-131] Spec.No.: Bd.U.1/Page No.537 |
| 38 | Item No. 4:- Providing and laying in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C.work in foundations likeraft,strip foundations,grillage and footings of R.C.C.column sand steel stanchion setc.including bailing out water,formwork,laying/pumping coveRr blocks,compaction and curing roughening the surface if special finishi TO provided (Excluding reinfor cement and structural steel)etc. complete,withfully automatic microprocessor based PLC with SCADA enabled reversibl eDrum Type mixer/concrete Batch mixplant (Panmixer) etc.complete.With natural sand/V.S.I. quality Artificial Sand |
| 39 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.6 Page No. 300 and B.7, Page No.38 |
| 40 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.5 Page No. 300 and B.7, Page.No. 38 |
| 41 | Providing structural steel work of rectangular hollowsteel section for steel trusses,othersimilar trussed items like purlin andmemberswith all bracing, gusset platesetc. as perdetaileddesignsanddrawingsorasdirectedincludingcutting, fabricating,hoisting, erecting, fixingin positionmakingriveted/bolted/ welded connections andone coat of anticorrosivepaintandoverit twocoatsofoilpaintingofapprovedqualityand shade complete. |
| 42 | Providingand fixingcolour coated Zincalume( R ) AZ150 ( min 150 gms/sq.mt.total oneachside)profiledsheetsforroofing.Thefeedmaterial ismanufacturedoutofnominal0.45mmBaseMetalThickness(BMT)(0.5mmTCT),Hi-strengthsteelwithmin.550MPayield strength, metallic hot dip coated with Aluminium-Zinc alloy(55%aluminium43.4%zinc1.6%silicon)withCOLORBOND(R)steelqualitysuperdurablepolyesterpaint coat (withinorganic pigment). The paint shall have a totalcoating thickness of nominal 35 um,comprisingofnominal25umexteriorcoatontopsurface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 9501050mmeffective coverwidthandnominal 25-30mmdeep ribswithsubtle squareflutinginthefivepanatnominal180-250mmcenter-to-center. Theend rib shall bedesigned for anti-capillary groove. and return leg. The feedmaterialshouldhavecoilmanufacturersproduct detailsmarkeda regular interval. Including fastenerswithmin.fastenedwithmin. 25 umZinc-Tin alloy coated, Hex head, self-drilling screwetc.complete. (weight of profile 4.52 Kilogram/ One Square Metre |
| 43 | Providing and fixing plain zinc sheeting of 0.80mm thick (22B.W.G.) over theridgehiporvalleytogalvanizedironsheetroofingincludingallfasteningandboltgalvanisedironscrews and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). |
| 44 | Filling in plinth and flooRs. with contractoRs. approved material / murum / stone dust in 15cm. to 20cm. layeRs. including watering and compaction complete.( Including Royalty) [8/BDA/11,P NO-4] Spec. No. : Bd.A. 11/Page No. 263 |
| 45 | Providing and constructing BrickMasonry Inspection Chamber 60cm x 45cm x 90cmincluding 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half roundG.S.W.pipes,BrickMasonry,plasteringfrominsideandwithframefixedin cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete. |
| 46 | Providing rainwater harvesting arrangement for new building by providing half round 160 mm dia pipe line at roof slab to collect rain water from roof to drain etc |
| 47 | Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender