Tender For Special Repair To Bldg No P-33 And P-34 (06 Nos Qtr) At Arjunganj Under Ge (East) Lucknow
Tender Value
38.74 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
14 days left
EMD
77480
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-33 And P-34 (06 Nos Qtr) At Arjunganj Under Ge (East) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete Complete all as specified and directed |
| 2 | M&L for brick work with old size fly ash bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 Complete all as specified and directed |
| 3 | M&L for Plastering by using ready mix mixture of thickness 15 mm thick with water proofing liquid and taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, Complete all as specified and directed |
| 4 | M&L for repair to plaster by using readymix mixture of thickness 10 mm and taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, Complete all as specified and directed |
| 5 | M&L for repair to plaster by using readymix mixture of thickness 5 mm and taking down cement or cement lime plaster, raking out joints and preparing plastering the Celing surface with white cement based polymer modified self curing mortar, including disposal of rubbish, Complete all as specified and directed |
| 6 | M&L for preparation of plastered surfaces and applying two coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, over a coat of 2mm thick putty and primer of required shade and colour complete, as per manufacturer's specification ,Complete all as specified and directed |
| 7 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces Complete all as specified and directed |
| 8 | M&L for prepration new plastered surfaces and applying three coat of white wash on ceiling Complete all as specified and directed |
| 9 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) and area exc 1.5 Sqm but n.exc 4 sqm each Complete all as specified and directed |
| 10 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) and area n.exc 1.5 Sqm each Complete all as specified and directed |
| 11 | S&F for in repair three layer rotational moulded polyethylene water storage tank cylindrical hoisted & fixed in position incl dismantiling water tank complete all as specifed capacity 1000 ltrs Complete all as specified and directed |
| 12 | S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density Plastic ball Screwed for iron pipe and fixed (Minimum weight -210 gms, Complete all as specified and directed |
| 13 | S&F 15 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down Complete all as specified and directed |
| 14 | S&F 20 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down Complete all as specified and directed |
| 15 | Dismantling of stone slabs and tiles of any description or thickness in floors, platform, aprons etc laid bedded and pointed in any mortar Complete all as specified and directed |
| 16 | M&L for 20 mm thick granite (of any type and colour ) work (table rubbed and polished ) in steps, Jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite Complete all as specified and directed |
| 17 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations Complete all as specified and directed |
| 18 | M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand Complete all as specified and directed |
| 19 | Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for in this Schedule Complete all as specified and directed. |
| 20 | M&L for 75 mm thick PCC (1:4:8) type D-2 using 40 mm graded crushed stone aggregate as in sub base Complete all as specified and directed. |
| 21 | M&L for 75 mm thick cement concrete 1:3:6 type C-2, as in plinth protection smooth without using extra cement incl cutting joints at every 3 m & at corner, Joints to be filled with mastic bitumin Complete all as specified and directed. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, Complete all as specified and directed. |
| 23 | S&F vitrified ceramic tiles dark shade digital tiles/(double charged), 10mm thick (square/ rectanglar) polished , exceeding 0.18 sqm of each tiles not exceeding 0.38 sqm, in floors etc. laid over 15mm thick screed bed 1:6 , set and jointed in neat cement slurry and pointed in white/coloured cement to match Complete all as specified and directed. |
| 24 | M&L for Glazed ceramic tiles (coloured) in vertical surfaces 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10mm thick rendering in cement mortar 1:3 complete all as specified and directed. |
| 25 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. |
| 26 | S&F 75x50mm single rebated factory made 100% solid WPC (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum complete all as specified and as directed. |
| 27 | S&F 65x100 mm single rebated factory made 100% solid WPC (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum complete all as specified and as directed. |
| 28 | S&F 65x125 mm double rebated factory made 100% solid WPC prelem both side (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum complete all as specified and as directed. |
| 29 | S&F Factory made 30 mm thick 100% solid WPC (Wood Polymer Composite) solid both side prelem 0.14 micron Flush door shutter wit 10mm deep CNC moulding design of required size comprising of virgin PVC resin of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and as directed.Note:- The contractor shall furnish a valid memorandam of Understanding with the manufacturer (make mentioned in CA ) prior to execution of this items) |
| 30 | S&F 30mm thick factory made solid WPC (Wood plastic composit) moulded glzed door shuter with wire mesh in 08 number of division with brown wood grain texture including SS wire mesh (G-304) 0.36 mm minimum dia of wire and average width of aperature 1.4mm with XPM Aluminium alloy wire cloth of wire shall to be fixed with 15x15 square tube in side rails with screwing 8x28 heat metel zink coated screws can be remove of fix again after changing of wire mesh needed. The density not less then 780kg /Cum shall be as per manufacture instruction complete all as specified and as directedNote:- The contractor shall furnish a valid memorandam of Understanding with the manufacturer (make mentioned in CA ) prior to execution of this items) |
| 31 | S&F framed work as in doors, gates or grill of angle or other section with gussset plates, rails, braces etc complete drilled for fixing steel sheetings or other coverings. Doors etc to be prepared for hanging or sliding with and including either hooks or hinges steel hanging door fittings ( exclusive of steel sheeting or other coverings running rails and guides) and hanging also fastening and fixing complete quality conforming to Fe-290W (Gde E-165) quality B complete all as specified and as directed. |
| 32 | M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide/zinc chrome primer complete all as specified and as directed. |
| 33 | S&F powder coated alumium glazed window shutter sliding type using 1.30 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rils 100x44mm Make jindal/Hindalco including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodised aluminium fittings complete and glazing shall be done by using 5mm thick plain sheet glass Make- Modi guard/saint gobin) and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed. |
| 34 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 35 | S&F 4.00 mm thick sheet frosted glass and glazing with oil putty/Aluminium beads in square exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces ground or obsecured to one side complete all as specified. |
| 36 | S&F 18 mm thick solid WPC board of density @ not less than 600kg/Cum one side prelaminated decoratiove teak face and other side white and balancing as in kitchen shelf, shutters etc including chawkats and all fitting accessories etc including dismantling, complete all as specified and as directed. |
| 37 | S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws complete all as specified and as directed. |
| 38 | S&F 250 mm long Stainless steel sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts complete all as specified and as directed. |
| 39 | S&F for Stainless steel barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed. |
| 40 | S&F for Stainless steel barrel tower bolts 150 mm of extruded section and fixed complete all as specified and as directed. |
| 41 | S&F 125 mm size Stainless steel handles fabricated type extruded section ,ISI marked complete all as specified and as directed. |
| 42 | S&F 150 mm size Stainless steel handles fabricated type extruded section ,ISI marked complete all as specified and as directed. |
| 43 | S&F Butt hinges 125 mm stainless steel hinges medium weight and fixed complete all as specified and as directed. |
| 44 | S&F 100 mm Stainless steell Butt hinges type B-21 and fixed complete all as specified and as directed. |
| 45 | M&L for preparation of newly wood based materials of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 46 | S&F in repair. Vitreous china squatting pan Orissa pattern size 580x440 mm white with P or S trap front or back inlet with integral foot rests (excluding flushing cistern and flush pipe ) complete including provision of lime concrete bedding complete all as specified and as directed. |
| 47 | S&F in repair 10 Litres capacity PVC valveless syphonic action type flushing cistern low level, white with inlet ball valve float and handle including brackets connection to pipes and fixing of lever if any joint between flushing pipe and socket of WC pan pre-made complete all as specified and as directed. |
| 48 | S&F in repair Vitreous china wash hand basin white angle back size 550x400 mm including 32 mm dia CP waste coupling long screwed shank fly nut flanged end and embedded in lead to waste pipe excluding piller taps fixed complete all as specified and as directed. |
| 49 | S&F 110mm PVC (SWR) junction single (single T) equal or unequal complete all as specified and as directed. |
| 50 | S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or wall complete all as specified and as directed. |
| 51 | S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or in floor/wall complete all as specified and as directed. |
| 52 | S&F 110mm bore PVC (SWR) bends, any radius complete all as specified and as directed. |
| 53 | S&F PVC (SWR) bends any radius of 75 mm dia all as specified complete all as specified and as directed. |
| 54 | S&F PVC (SWR) 75mm floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 55 | S&F 15mm dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, scresed down screwed for iron pipe or for brass ferrule and fixed both ends for iron pipe or for unions complete all as specified and as directed. |
| 56 | S&F in repair 15 mm dia fancy type chromium plated Pillar tap cast copper alloy chromium plated fancy type with capstan head and cup screwed down screwed for G I pipe or for brass ferrule complete all as specified and as directed. |
| 57 | S&F 15mm dia fancy type chromium plated concealed stop/Angle cock for 15 mm bore pipe fixed as in repair complete all as specified and as directed. |
| 58 | S&F as in repair CP soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 59 | S&F CP brass towel rails 20 mm dia and 600 mm long fixed as in repair incl chromium plated brass screw and wooden / cleats complete all as specified and as directed. |
| 60 | S&F 600 mmx450x5 mm bevelled edge mirror of selected quality glass mounted on 6.0 mm thick AC building board or commercial plywood and fixed wooden plug with chromium coated brass screws and cup washers complete all as specified and as directed. |
| 61 | S&F PVC connection of 15 mm bore 600 mm long with brass coupling on both ends of superior quality all as specified.PTMT nuts fixed as in repair complete all as specified and as directed. |
| 62 | S&F in repairs 32 mm dia Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms) complete all as specified and as directed. |
| 63 | S&F in repairs 32mm dia PVC waste pipe approx 900mm long for sink/WHB complete all as specified. |
| 64 | S&F kitchen sink with drainage board made of stainless steel 1mm for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brakkets, bedding in cement mortar on to dwarf wall, conntecting union to pipe, overall mimimum size 915mmx460mm with bowl size 410mmx330mmx160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waster fitting with long screwed shanks and fly nuts, flage end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete including taking down old unserviceable sink complete all as specified and as directed. |
| 65 | S&F in repairs glass corner shelf assembly consisting of 5.5mm thick sheet glass 250X250mm size fixed with chromium plated brackets as in repairs complete all as specified and as directed. |
| 66 | S&F in repair glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 Cm long complete all as specified and as directed. |
| 67 | S&F in repairs PVC cabinet with mirror and door of size 560X410mm complete all as specified and as directed. |
| 68 | S&F in repairs 125 mm dia CP brass shower rose with or without swivel joints any size including fixing to steel pipe or union fixed in repair complete all as specified and as directed. |
| 69 | S&F in repair stainless kitchen plate rack made of 0.80mm thick sheet of size 900x1200 mm and fixed to wall complete all as specified and as directed. |
| 70 | Dismantling of Bricks (laid flat or on edge) or brick tiles in floors or roof laid beded and pointed in any mortar complete all as specified and as directed. |
| 71 | M&L cement concrete type B-1, 1:2:4 (20mm graded aggregate) on roof slab complete all as specified and as directed. |
| 72 | M&L for 10 mm thick on fair faces of concrete surfaces in cement mortar 1:3, mixed with liquid water proofing compound finished even and smooth without using extra cement. (Liquid water proofing compound to be measured paid separately) complete all as specified and directed. |
| 73 | Supply only Liquid water proofing compound complete all as spesified and directed. |
| 74 | M&L for application of high perfomance hybride polyurea elastomeric water proofing coating cold applied, liquid membrane at 1.5 kg/Sqm with an elongation minimum of 500+100% by roller and tensile strength of minimum 11-13 N/mm2 as per ASTM D2370, crack bridging ability minimum of 3 to 4 mm as per ASTM C1305 , Shore Hardness of minimum 70+5 as per ASTM D2240 complete as per directed by Engr-In-Charge. The System shall also include final base preparation including cleaning of the plaster surface etc and applying epoxy primer as approved makes in two coats at a coverage of 0.20 kg/Sqm, etc as per manufacturer specification, complete all as specified and directed. Note:- The contractor shall furnish a valid memorandam of Understanding with the manufacturer (make mentioned in CA ) prior to execution of this items) |
| 75 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in any type of soil complete all as specified and as directed. |
| 76 | M&LCement concrete 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass-concrete complete all as specified and as directed. |
| 77 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed. |
| 78 | S&F mild steel joist, channel, angle, or tee sections as in posts fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe-410-W (Gde E-250) complete all as specified and as directed. |
| 79 | S&F for trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etcof FE410-W (Gde E-250) complete all as specified and as directed. |
| 80 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 81 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 82 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed |
| 83 | M&L for point re-wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm and earth continuity conductor with 1.5 sqmm colour code drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken modular GI metal boxes 1mm thick and modular cover plate with frame of approved colour for mounting modular switches, sockets etc as required for the following complete all as specified and as directed |
| 84 | All as per Item No 83 hereinbefore but for One 5 A socket outlet on independent Board complete all as specified and as directed |
| 85 | All as per Item No 83 hereinbefore but for One 5 A socket outlet on same Board complete all as specified and as directed |
| 86 | All as per Item No 83 hereinbefore but point re-wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor complete all as specified and as directed |
| 87 | Supply and fix in renewal Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.PVC pipe 25 mm dia for protection of cables complete all as specified and as directed |
| 88 | Supply and fix in renewal Modular switch one way 6A 230V AC 50 HZ SP one module complete all as specified and as directed |
| 89 | Supply and fix in renewal Modular switch one way 16A 230V AC 50 HZ SP one module complete all as specified and as directed |
| 90 | Supply and fix in renewal Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module complete all as specified and as directed |
| 91 | Supply and fix in renewal Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module complete all as specified and as directed |
| 92 | Supply and fix in renewal of MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 100 Amps rated bus bar including necessary dummy plate and necessary civil works complete all as specified and as directed |
| 93 | Supply and fix in renewal of MCB SP 230V, 6-32 Amps capacity complete all as specified and as directed |
| 94 | Supply and fix in renewal of MCB SPN 230V, 32-63 Amps capacity complete all as specified and as directed |
| 95 | S&F in renewal of modular bell push single pole 1 module 6 Amp, 240 volt complete all as specified and as directed |
| 96 | S&f in renewal of call bell , ding dong AC single phase 230 volts complete all as specified and as directed |
| 97 | S&F in renewal of Ceiling rose PVC polycarbonate complete all as specified and as directed |
| 98 | Supply and fixing in renewal of wall/surface mounted integrated batten LED light luminaire of 4ft length with a system wattage of 18 watt , power coated die cast/extruded aluminium body (thickness>1.20mm) or CRCA sheet body (Thickness>-.50mm) and construction as per IS:10322 with driver (Replaceable) as per the reqmt with driver efficiecy >85%, system lumen efficacy 120lm/Watt output, operating voltage AC 140-270 volts, 50Hz, operating temp rang-15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with short and open ckt protection, THD<10%, PF>.95, IP20, CRI>80, Flicker free (flicker should be below 5%), life time (LED & electrical circuitary) of min 50000 burning horus with 70% of initial lumen maint till life ends, CCT 5700 degree K (As per ANSI Bin), SDCM (Std deviation color matching)<3, max power consumption should not more than the specified rating and fixture shall be of relevant BIS standard and std and trade mark cert (TC). Manufactures word kark/name engraved/embossing/screen printing on housing complete in all respect incl connections with suitable size FRLS, PVC insulated copper conductor cable and earthing etc as reqd with min 5 years OEM warrenty. LM79 & LM80 test report from NABL lab for all tests reqd for LED fixtures as BIS shall be submitted etc complete all as specified and as directed Note:- Heat srink of aluminium housing such that LED junction trmp shall not rise above 90 degree Cel. |
| 99 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed |
| 100 | S&F in replacement decorative wall mounted fancy light fitting made up of brass rubi lamp brand Single handed including of bulb of 9-15 watts covered by glass complete all as specified and as directed |
| 101 | S&F LED bed side fitting 3 Watt 3000K 150lm complete all as specified and as directed |
| 102 | Supply and fix in renewal 45W Pressure die cast aluminium housing street light with system lumen of 6300 lm and system efficacy of 140 lm/w, IP-66,IK-10 single piece die cast incl spigot, dia 48-76mm,LED lifetime (L70B50) 75k Hrs with integrated optical cover. Street light should have standalone lighting control system with AUTO ON/OFF based on DUSK/DAWN timings,preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, incleds dimming profile for energy savings,drift not exceedind max 2mins/year, clock retention upto five yeras, auto switching off secondary power for module,dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminiarie incl driver and astro module,surge protection as perIEC 61000-4-5 complete all as specified and as directed |
| 103 | Supply and fixing in replacement of Solar integral AIO streetlight with Aluminium housing, reliable & robust construction with IP65 & IK08 protection. The luminare Lithium /LifePo4 Battery capacity min [email protected] or 20w4.5v pv panel power CRI >=70, System Efficacy >165lm/W, & Minimum Lumen 4000 system wattage should not be more than 25W ± 2%, if wattages increases then the size of battery & panel shall also be increased in similar percentage to maintain equal autonomy of the system. Weight not more than 2.32 kg . The fixture should have in microwave motion sensor &sensor dealy time 18 seconds Life class of LED 50000hrs@ incl clamps ,brackets and nut-bolts and other connected items for fixing the light on wall complete all as specified and as directed |
| 104 | Supply and fix LED gate light of 40/45W LED Postop luminaire with aluminium pressure die-cast mounting spigot & polyester powder coating in addition to a specific weathering resistance treatment, color RAL7011. Non-yellowing transparent Polycarbonate UV-protected round symmetrical diffuser with circular radial pattern for glare-free and even light distribution. High Efficiency long life LED module with efficacy of >100Lm/W, CCT 4000K, and CRI >70. Powered by built-in electronic driver with THD <10%, 4kV inbuilt surge protection, high cut-off at 325V & auto-restart, including 8hrs. protection from 440V (P2P). Suitable for pole mounting having OD of 60 mm and height of 6 meters. Fixture lumen efficacy >4500 Lm, IP66 (no glue), IK05, PF>0.95, Operating voltage range: 140- 277V, complete all as specified and as directed |
| 105 | Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 25 mm dia with all fittings complete all as specified and as directed |
| 106 | Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 25 mm dia with all fittings complete all as specified and as directed |
| 107 | Supply and fixing ceiling fans remote operated complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with copper winding incl remote complete all as specified and as directed |
| 108 | Supply and fixing of wall fan of 300 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/min with all accessories complete all as specified and as directed |
| 109 | Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20 amps SPN MCB complete all as specified and as directed |
| 110 | Material and labour Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS rounds 1.5 kgs, funnel ,watering pipe etc complete all as specified and as directed |
| 111 | Supply & fix sheet metal enclosure indoor type of size 0.9 x 0.9 x 0.2 mtr suitable to fix on wall/floor made out of 2mm thick CRCA sheet having independent compartments suitable for single phase energy meters and MCB provided with front hinged shutters with lockable arrangements and clear glass to visualize the meter reading without opening the compartment with sufficient working space in compartment prewired with single core PVC insulated and sheathed FRLS stranded copper conductor wire of suitable size from bus bar to meter compartment 04 Nos duly crimped with copper thimbles, duly powder coated complete complete all as specified and consisting with the following :- (a) Copper Bus bar for 3 phase 4 wire system of 4 x 200 Amps rated insulated copper strip mounted on resin cast insulators in independent compartment having front openable shutter - One set.(b) incoming MCCB, four pole, 415 volts, 125 Amps, 25 KA with adjustable Overload setting Ir = (0.8 to 1.0)xIn - One No. (c) outgoing MCB SPN, 40 Amp,10 KA C-Curve - 04 Nos. (d) Multifuction meter(0-500) Volts with inbuilt selector - One set.(e) Indicator Lamps LED in Red in Red/ Yellow/ Blue colour - One Set of Three. |
| 112 | Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 20 cm girth and matching wall color complete all as specified and as directed |
| 113 | Supply and fixing Exhaust fan PVC body 250 mm sweep working on single phase supply incl. all accessories including electrical connection with required wire complete all as specified and as directed |
| 114 | Supply and fixing Exhaust fan steel body 300 mm sweep working on single phase supply incl. all accessories including electrical connection with required wire complete all as specified and as directed |
| 115 | Supply and fixing Digital storage water heater (Geyser) Square type of capacity 25 ltrs, 230 volts, power consumtion 230V, vertical type, Rated pressure 5.6 bar pressure rating more than 8 bar suitable for high rise buildings,rust and shock proof ABS Outer body for lomg life,Stainless steel inner tank of 304 grade,65 MPa bar pressure,colour changing lights that change from blue to amber to indicate the hotness of water,automatic shut off including four nos of rag bolts and making the elctrical / water supply connection including testing after installation complete all as specified and as directed |
| 116 | Supply and fix GI Pipe light grade 80 mm dia for protection of cables complete all as specified and as directed |
| 117 | Supply and laying XLPE Insulated armoured electric heavy power cable with aluminium stranded conductor ,1100 volts grade, cross sectional area 50 sqmm x 3.5 core complete all as specified and as directed |
| 118 | M &L for Excavation in trenches not exc 1.5 m wide and not exc 1.5m deep for laying of pipe, cable etc and getting out in soft/loose complete all as specified and as directed |
| 119 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed |
| 120 | Removing surplus excavated material to a distance not exc 50 meter and depositing where directed at level not exc 1.5m above the starting point complete all as specified and as directed |
| 121 | M &L for DWC HDPE Pipe along with all aceessories like socket , bend,couplersetc ISI mark as per IS: 16205 (PART-24) including cutting, jointing,laid in trenches,wall , floor,etc as required 63 mm outer dia and 50 mm inner dia complete all as specified and as directed |
| 122 | Taking down of Geyser of any capacity and deposited to AGE E/M Yard complete all as specified and as directed |
| 123 | Taking down of ceiling fan /exhaust fan/wall fan/air freshner of any size and deposited to AGE E/M Yard complete all as specified and as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender