Tender For Special Repairs To Hardstanding, Staircase, Railing And Gate Near Bldg No P-64 And From Ndv To Sailing Club Under Ge Haddo, Sri Vijaya Puram
Tender Value
48.50 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
0 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Hardstanding, Staircase, Railing And Gate Near Bldg No P-64 And From Ndv To Sailing Club Under Ge Haddo, Sri Vijaya Puram
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Aug-2026 | BOQ Corrigendum | BOQ | 07-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed. |
| 2 | M & L for hardcore of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stone or boulders all as specified and as directed. |
| 3 | M & L for providing 100 mm thick, PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floors all as specified and as directed. |
| 4 | M&L chequered Cement concrete tiles 30cmx30cmx 25 mm thick set, jointed and pointed neat cement slurry in floor with grey cement and pigments , incl CM (1: 4) 20 mm thick screed bed all as specified and directed by Engr-in-Charge. |
| 5 | M&L for heavy duty Non skid tiles of size 300x300x9mm thick or high dimension (except thickness) of any colour any design durastone, weather proof impact ressistant, abrasion resistant exterior tiles, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed |
| 6 | Demolition of precast cement concrete block walling built in CM or cement lime Mortar complete all as specified and as directed. |
| 7 | M& L for precast cement concrete block masonry with solid blocks using PCC 1:3:6, type C1(using 20mm graded stoneaggregate), exc. 10cm in width, set in CM 1:6 all as specified |
| 8 | M & L for PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in filling, foundation and mass concrete complete all as specified and as directed. |
| 9 | M&L formwork rough finished flat surface to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed |
| 10 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed |
| 11 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces finished with even and smooth without using extra cement in CM 1:4 complete all as specified and as directed |
| 12 | Material & Labour for preparing newly plastered wall surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed |
| 13 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed |
| 14 | M&L for framed work such as grills, gratings, etc,. With ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars, barred iron doors ladders including portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts for ornamental and intricate design as specified and directed |
| 15 | S&F for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified |
| 16 | M&L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed |
| 17 | M&L for complete removal of existing treatment on plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed |
| 18 | M & L for preparing of new of previously untreated steel surface of any description, not otherwise described, over 10 cm width or girth applyig two coats of synthetic enamel paint over a coat of red oxide / zinc chrome primer complete all as specified and as directed.. |
| 19 | M&L for Non skid heavy duty ceramic tiles of size 600 x 600 x (8-10mm) thick or high dimension (except thickness) of any colour any design durastone, weather proof impact ressistant, abrasion resistant exterior tiles, as in floors vertical cladding and etc, set and jointed in neat cement slurry over and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed |
| 20 | Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed |
| 21 | M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete. (Note : Colour of granite shall be as approved by Engr-In-Charge) |
| 22 | M&L Aluminium composite panel sheet of 3.0mm thick of any colour or design with skin thickness of 0.25mm of aluminium on both sides, sandwitched by 2.5mm polyethylene core with PVDF coating of 30.0 micron fixed with Angles or MS or SS Flats etc for by screws/bolts & nuts etc for view cutter in approved pattern etc complete all as specified and directed. |
| 23 | Providing and fixing 35–40 mm thick premium quality Artificial Golf Grass Mat of approved make, manufactured from 100% UV-stabilised polyethylene (PE) monofilament yarn with polypropylene (PP) thatch fibres, tufted into a heavy-duty double-layer woven polypropylene primary backing with SBR latex secondary backing, suitable for outdoor golf practice areas, putting greens and sports applications. The artificial turf shall have pile height 35–40 mm, face weight not less than 1,000 g/m², total weight not less than 2,300 g/m², tuft density not less than 16,800 tufts/m², stitch rate not less than 160 stitches per metre, gauge 3/8 inch, water permeability not less than 30 litres/min/m², colour fast, UV resistant, weather resistant, rot proof, fungus resistant, non-toxic, lead-free and capable of withstanding heavy foot traffic under Indian climatic conditions.The turf shall be laid over a prepared, firm, dry and levelled base including cleaning of the surface, cutting to required size and shape, edge trimming, proper alignment, jointing with approved PU adhesive and non-woven seaming tape of minimum 300 mm width, rolling wherever required to ensure proper bonding, brushing of fibres using mechanical/power brush to restore upright position, dressing, finishing, removal of all surplus material and making good disturbed surfaces including taking out old grass mat complete in all respects, all as specified and directed by the Engineer-in-Charge. |
| 24 | Supply, fabrication, fixing, testing and commissioning of custom-made LED Neon Sign Board of approved design, shape and size not less than 1200 MM to 1800 mm , comprising 6 mm thick laser/CNC cut clear cast acrylic backing sheet with polished edges, mounted with premium quality flexible silicone LED Neon Strip (6 × 12 mm or 8 × 16 mm) of approved colour (Warm White/Cool White/Blue/Red/Green or as approved), complete with high brightness SMD LEDs, operating on 12/24 V DC, IP65 protection, colour fast, UV resistant and suitable for indoor/outdoor installation.The item shall include fabrication of approved lettering, logo, insignia or artwork, fixing of LED neon flex on acrylic backing, approved constant voltage LED driver/SMPS, power adaptor, concealed PVC insulated FRLS copper wiring, connectors, SS spacers (minimum 25 mm projection), screws, wall plugs, mounting accessories, making electrical connections to the nearest lighting/power point, testing, commissioning and demonstration of satisfactory operation, including taking down old board complete all as specified and directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender