Tender For Upgradation Of Directorate Of Handicrafts And Handloom Alongwith Washroom At Udyog Bhawan, Jammu.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Sep 2026
15 days left
EMD
58720
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kathua → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Directorate Of Handicrafts And Handloom Alongwith Washroom At Udyog Bhawan, Jammu.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling aluminum / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge. |
| 2 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead a) Of area of 3 sqm and below |
| 4 | b) Of area beyond 3 sqm |
| 5 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm |
| 6 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix) |
| 7 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge |
| 8 | Enganging Plumber & helper for removing of existing Chinaware wc,washbasin,Cp fittings, pvc/GI/cpvc pipes etc all complete job inclusive of all taxes |
| 9 | 01 Fitter (Grade 1) |
| 10 | 01 Helper (Technician) |
| 11 | Enganging labour for removing of existing material from different locations of the office and also lifting of unserviceable material from the site & dispose it as per the directions of the Engineer-In -Charge |
| 12 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) in superstructure above plinth level upto floor five level |
| 13 | 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) |
| 14 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigmentsetc. complete Size of tile 600x600 mm |
| 15 | Providing and fixing Vitrified wall tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades, with cement based high polymer modified quick-set tile adhesive (water based) conforming toIS:15477, in average 3mm thickness including grouting the joints with white cement and matching pigments etc. complete (Size of tile 600x1200 mm) |
| 16 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 17 | Hacking of wall including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. |
| 18 | Providing and fixing Ceramic glazed wall tiles with cement based high polymer modified quick-set tile adhesive (water based) conforming to IS:15477, in average 3mm thickness Ist quality ceramic glazed wall tiles conforming to IS15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in Charge, in skirting, risers of steps and dados and jointing with white cement mixed with pigment of matching shade complete. |
| 19 | Providing and fixing, in position concealed G.I section for wall panelling using board of required thickness fixed on the ‘W’ profile (0.55mm thick) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55mm placed @ 610mm C/C in perimeter channel having one flange of 20mm and another flange of 30mm with thickness of 0.55mm and web of length 27mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610mm C/C with fully threaded self-tapping dry w all screws. Board is fixed to the ‘W’ profile with 25mm countersunk ribbed head screws @ 200mm C/C, all complete as per the drawing and directions of engineer- in-charge. The joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish Plain Gypsum plaster board conforming to IS: 2095 (Part -1) :2011 (Board with BIS certification marks) 12.5 mm thick |
| 20 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick |
| 21 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter |
| 22 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats |
| 23 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood |
| 24 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 26 | Providing and fixing factory made flush door shutters 30 mm thick made of pre-laminated flat pressed three layer particle board conforming to IS: 12823 exterior grade (Grade I Type II) having one side decorative lamination of approved shade and other side balancing lamination including second class teak wood lipping of 25mm widex12mm thick with necessary screws and black enameled M.S. butt hinges complete as per directions of Engineer- in-charge |
| 27 | Providing and fixing prelaminated wooden wall panelling 8 mm thick including framework of plyboard 12mm thick underneath using stainless steel screws/nails complete. Class AC-4(Make: Leben/Action/Tesa/Shepherd/Floor) |
| 28 | Providing and fixing Wooden flooring 8mm thick including laying of foam based cushion underneath it. Class AC-4 (Make: Leben/Action/Tesa/Shepherd Floor) |
| 29 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :Sal wood |
| 30 | Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work,complete as per direction of Engineer-in-charge (Frame work shall be paid for separately).12mm thick commercial ply conforming to S : 1328 BWR type |
| 31 | Providing and fixing decorative high pressure laminate sheet of approved colour,shade & texture on wooden surface with approved addesive including necessary surface preparation, pressing,trimming,finishing & labour complete as directed by Engineer in charge .1.0 mm thick |
| 32 | Providing and fixing carbon steel galvanized (minimum coating 5 micron)dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2) counter sunk head, comprising of 10 m dia polyamidePA 6 grade sleeve, including drilling of hole in frame , concrete masonry etc. as per direction of Engineer-in-charge.10x160mm |
| 33 | Supplying & Fixing Roller blinds of superior quality of any colour/shade as approved by Engineer incharge including fittings & all inclusive of taxes & carriage complete job. (Make MAC/Ddecor/Vista/Johnson) |
| 34 | Providing & fixing wooden cabinets having 19mm thick MR plywood (make as approved by the engineer in charge) 1.0 mm thick sunmica (any colour/ shade approved by engineer in charge) to be fixed on external side of the cabinets & 0.8mm thick Sunmia of off white colour to be fixed on internal side, hydralic hinges (godrej or hettich make ) handles of superior quality/ finish & 75mm drawer & cup board lock (godrej or hettich make) Complete Job including loading & unloading of material (Measurement for height to be made above the stainless steel cabinet legs) |
| 35 | Providing & fixing work stations with attached cabinet having shutters of 19mm thick moisture resistance plywood,12mm MR plywood on backside, 1.0mm thick sunmica of any color/shade,0.8 mm sunmica (wooden shade) & pvc edge band,hydraulic hinges (soft close) ,buffer,150mm long fancy handles pin board 12mm with fabric covering.(Rates are inclusive of all taxes & carriage complete job).(Measurement for height to be made from bottom to top surface of table) (Workstation size 3'-6\\" x 2'-0\\" Partition height 14\\" above table) Clerical Hall |
| 36 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. : 200x10 mm |
| 37 | Providing and fixing matt finished 20cm/8\\" mortice latch and lock with 6 levers and a pair of lever handles of approved quality/make as approved by Engineer incharge with necessary screws etc. Complete job. |
| 38 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm |
| 39 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm |
| 40 | Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete : |
| 41 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge |
| 42 | Providing,fixing or laying on wall face or floor un-plasticized Rigid PVC rain water/WW/SW pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.Single socketed pipes.(Make Prince/Supreme/Astral) |
| 43 | 50mm diameter |
| 44 | 75mm diameter |
| 45 | 110mm diameter |
| 46 | Providing and fixing on wall face/floor un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water/WW/SW pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (Make:Prince/Supreme/Astral) |
| 47 | Reducer 110x75mm |
| 48 | Single tee with door 110x110x110 mm |
| 49 | Y tee 110x110mm |
| 50 | Bend 87.5° 110 mm bend |
| 51 | Floor Trap 110x75mm |
| 52 | Half bend 45º 110mm |
| 53 | Half bend 45º 75 mm |
| 54 | Multi trap 110x75mm |
| 55 | Door bend 110x110mm |
| 56 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot and cold water supply, including allCPVC plain and brass threaded fittings. This includes jointing of pipesand fittings with one step CPVC solvent cement and testing of jointscomplete as per direction of Engineer-in-charge. Internalwork Concealed fixing the pipe with clamps at1.00 meter spacing including cutting chases and making good thewall etc.20mm nominal outer dia pipes |
| 57 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipesand fittings with one step CPVC solvent cement and testing of jointscomplete as per direction of Engineer-in-charge. External work including trenching, refilling etc25mm nominal outer dia pipes |
| 58 | Providing and fixing floor mounted, white vitreous china single piece,double traps syphonic water closet of approved brand/make, shape,size and pattern including integrated white vitreous china cistern ofcapacity 10 litres with dual flushing system, including all fittings andfixtures with seat cover, cistern fittings, nuts, bolts and gasket etcincluding making connection with the existing P/S trap, complete inall respect as per directions of Engineer-in-Charge. |
| 59 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levelsGranite of any colour or shade (Area of slab over 0.5 sqm) |
| 60 | Providing and fixing white chinaware Table Top Basin of size 705x355x140mm |
| 61 | Providing and fixing 15 mm nominal bore of standard back type C.P.brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg single lever Hot & Cold |
| 62 | Providing & Fixing CP Health feucet with 1.0 meter SS Hose & Hook including all fittings complete job. |
| 63 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 64 | Providing and fixing CP waste coupling full thread 32mm |
| 65 | Providing and fixing CP square Towel ring. |
| 66 | Providing and fixing toilet paper holder.C.P. Brass |
| 67 | Providing and fixing 900x900 mm beveled edge mirror of superior glass(of approved quality) having metallic cover of shade like black,rose gold or any other colour as approved by Engineer in charge complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers including fixing of strip lights of 3 different shades complete job. |
| 68 | Providing and fixing glass liquid soap container with snap fittings of approved quality and colour. |
| 69 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Semi rigid pipe.40 mm dia. |
| 70 | Providing and fixing 100 mm Stainless steel Grade 304 CP gratings with & without hole. |
| 71 | Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length.20 mm nominal bore |
| 72 | Providing and fixing uplasticized PVC connection pipe with brass unions 60 cm length.20 mm nominal bore |
| 73 | Providing and fixing CP towel rod complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality : 600 mm long towel rail. |
| 74 | Providing and fixing white chinaware urinal of size 375x390x575mmincluding 12mm thick frosted toughened glass urinal partition complete job. |
| 75 | Providing and fixing CP urinal spreader |
| 76 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto1 metre long with S.S. triangular plate to European type W.C. ofquality and make as approved by Engineer - in - charge. |
| 77 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 78 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 79 | Providing and fixing wall mounted 15 mm nominal bore C.P. brass sink cock of approved quality. |
| 80 | Providing and fixing concealed body of high flow diverter 45mm cartridge. |
| 81 | Providing & Fixing exposed part of wall mounted single lever basin mixer including spout with 2mm thick solid flange suitable for concealed body. |
| 82 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 |
| 83 | Enganging glazier & helper for the fixing of aluminium partitions,door shutters,window shutters with available serviceable aluminuim sections complete job but excluding the cost of fittings if required at site. |
| 84 | Glazier |
| 85 | Helper |
| 86 | Engaging Carpenter & helper for the repair of existing wooden door including removing / refixing the existing door shutters completed job.(Excluding the cost of fittings) |
| 87 | Carpenter (1st Class) |
| 88 | Helper |
| 89 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snapbeading for glazing / panelling, C.P. brass / stainless steel screws, allcomplete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion. Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
| 90 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminumsnap beading shall be paid in basic items. With float glass panes of 5.0mm thickness (weight not less than 12.50 kg / sqm) |
| 91 | Providing & Fixing window/door fabric curtains of superior quality of any colour/shade/design as approved by Engineer incharge including stitching/ accesories fitted with the curtains inclusive of all taxes complete job.Height of the curtain must not be less than 3.0 meter in length. |
| 92 | Providing and fixing brass curtain rods of wall thickness 1.25 mmwith two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.20 mm diameter |
| 93 | Supplying & applying weatherproof silicon sealent in existing glass window frames |
| 94 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 95 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 96 | Providing & fixing superior quality solid embrosed poly carboneted sheet 3m thick (any colour/shade approved by engineer in charge ) including fixing overlapping of sheets upto 300mm & also fixed with SS self drilling screws,weather proof silicon sealent in joints for leakage protection complete job on top of the sheet. |
| 97 | Providing and fixing anodised aluminium sliding door shutter fabricated from approved make 16 gauge anodised aluminium sections conforming to IS : 733 and IS : 1285 with minimum anodic coating grade AC 15 as per IS : 1868, including vertical and horizontal members, meeting stile, lock rail, glazing clips, snap beading, cleats and track sections complete. The shutter shall be fitted with heavy duty rollers, locking arrangement, aluminium handles, guide blocks, wool pile, EPDM / neoprene rubber gasket, screws, rivets, silicone sealant and all necessary fittings and accessories complete. The shutter shall be partly glazed with 5 mm thick glass and partly fixed with prelaminated board of approved shade and make including cutting, fixing and finishing complete. The item includes fabrication, erection, fixing in position, making provision for fittings, loading, unloading, carriage of material, all taxes, contractor’s profit, overhead charges and all leads and lifts complete.” |
| 98 | Supplying of Wooden executive table size 5x3 made of 17mm commercial board / MDF Board one side having three drawers and other side having extension 4' long with provision of CPU drawer & Key Board all rolled on telescopic channels, table pasted with superior natural teak ply / veneer Front side of table being designed with leather foam decorated to give it an elegant design, table duly polished in melamine polish including loading unloading carriage & inclusive of all taxes. . |
| 99 | Providing and supplying Officer/Executive Chair, ergonomic high-back office chair with breathable mesh/fabric backrest, cushioned upholstered seat, adjustable headrest, adjustable lumbar support, adjustable armrests, hydraulic gas-lift height adjustment, tilt/recline mechanism with locking facility, heavy-duty nylon/polymer frame, 5-star base with castor wheels, loading/unloading, carriage, labour and all incidental charges complete as directed by the Engineer-in-Charge.make/models: Interio (Godrej) – Greta 2.0 High Back Fabric Ergonomic Office Chair, Green Soul – Cosmos Superb Ergonomic Office Chair, The Sleep Company – Onyx Orthopedic Office Chair. |
| 100 | Supplying of Sofa Set 3 seater ornamental type frame made of hard wood with superior type cloth covering with 5\\" foam seat & 4\\" foam on back with melamine polish having elegant look including loading unloading carriage & inclusive of all taxes. |
| 101 | Supplying of Sofa Set 2 seater ornamental type frame made of hard wood with superior type cloth covering with 5\\" foam seat & 4\\" foam on back with melamine polish having elegant look including loading unloading carriage & inclusive of all taxes. |
| 102 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved make and manufacturer, including providing and fixing top and bottom pivots, double-action hydraulic floor spring, necessary cut-outs/holes, and all required fittings and accessories for proper installation, complete in all respects as per approved specifications and directions of Engineer-in-Charge. The rate shall include UV printed logo and text or etched/sandblasted department logo and text on the glass, as directed by the Engineer-in-Charge, including all taxes, labour charges, carriage, loading/unloading, and all incidental charges for complete execution of the work. Door handle, lock and stopper shall be paid separately. |
| 103 | Providing and fixing 450 mm long stainless steel pull handle of approved make and manufacturer for 12 mm thick toughened glass door shutter, made of Grade 304 stainless steel with satin/matt finish, including all necessary fixing accessories, drilling/cut-outs in glass wherever required, and complete installation in all respects as per approved specifications and directions of Engineer-in-Charge. The rate shall include all taxes, labour charges, carriage, loading/unloading, and all incidental charges for complete execution of the work. |
| 104 | Providing and fixing stainless steel patch lock of approved make and manufacturer for 12 mm thick frameless toughened glass door shutter, suitable for double-leaf glass door, including all necessary fittings, accessories, keys, required cut-outs in glass, and complete installation in all respects as per approved specifications and directions of Engineer-in-Charge. The rate shall include all taxes, labour charges, carriage, loading/unloading, and all incidental charges for complete execution of the work. |
| 105 | Disposal of unserviceable material/building rubbish/Mulba from site to dumping area upto distance of 15 kms including loading,unloading & stacking all complete Job. |
| 106 | Carriage of Material by MT including loading & unloading and stalking: |
| 107 | a) Sand from 15 kms |
| 108 | b) C.Agg from 15 kms |
| 109 | c) Bricks from 15 kms |
| 110 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable size G.I box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Wire Make: Anchor/Havells/Vguard/Polycab MMS Conduit Make: AKG/Anchor/Finolex/Polypack |
| 111 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed Medium Class PVC conduit as required. Wire Make: Anchor/Havells/Vguard/Polycab(MMS Conduit Make: AKG/Anchor/ Polypack/Finolex |
| 112 | a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 113 | b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 114 | c) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 115 | Supplying and fixing of following sizes of mediumclass PVC conduit along with accessories insurface/recess including cutting the wall and making good the same in case of recessed conduit as required. Make: AKG/Anchor/ Polypack/Finolex25 mm |
| 116 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Make: VGuard/ Havells/ABB/Anchor /Schneider/ Siemens)a) SINGLE POLE |
| 117 | b) 32A ( Modular Type) |
| 118 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Make:Havells/ABB/Legrand/Anchor /vguard/ L&T/ Schneider) |
| 119 | a) 5/6 amps switch |
| 120 | b) 3 pin 5/6 A socket |
| 121 | c) 15/16 A switch |
| 122 | d) 6 pin 15/16 A socket |
| 123 | Supplying and fixing following piano type switch/socket on the existing switch box/ cover includingconnections etc. as required. (Make:Havells/ABB/Legrand/Anchor /vguard /L&T/Schneider) |
| 124 | a) 5/6 amps switch |
| 125 | b) 3 pin 5/6 A socket outlet |
| 126 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required(Make:Havells/ABB/Legrand/Anchor/vguard/L&T/ Schneider) |
| 127 | 3 Module |
| 128 | 4 Module |
| 129 | 6 Module |
| 130 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.(Make: Havells/ABB/Legrand/Anchor /Schneider/ Vguard) |
| 131 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Make:VGuard/Havells/ABB/Panasonic/Schneider/Siemens/ Anchor) |
| 132 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Make: Havells/ABB/Siemens/ Panasonic/Vguard/ Anchor)a) 8 way (4 + 24), Double door |
| 133 | Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature Inverter Type - Cooling only Make: Voltas / Blue star / LG / O-General/ Lloyd/ Hitachi. |
| 134 | a) 1.5 TR with 5 Star BEE Rating |
| 135 | b) 2.0 TR with 5 Star BEE Rating |
| 136 | Supplying , Installation, Testing and Commissioning of Window type Air conditioners complete with copper power cable upto 3 Mtr, wireless Remote, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing, cooling, dehumidification, air circulation, R-32/R-410A /R-407B Green Refrigerant with Scroll / rotary compressor with min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB), antifreeze thermostat on the coil as a safety feature, complete with fixing including T&P & labour etc as required complete in all respect as specified of following capacity. Sound level of up to 50dB inside the room is acceptable. The unit shall be in confirmation with IS 1391 Part-I 2023 and CPWD Specification. The system shall be able to deliver 100% of the rated capacity upto 42 0C. The system shall be able to operate up to 50 0C (out door ambient temperature). Non Inverter TypeMake: Volts / blue star / LG / O-General/ Lloyd/ Hitachi. |
| 137 | 1.0 TR with fixed speed 5 Star BEE rating |
| 138 | Supplying, Installation, Testing & Commissioning of following capacity automatic voltage stabilzer copper wound wall mounted, single phase with range of 90-240 V along with wall mounting brackets & fitting. The job includes repairing the walls where necessary. Warrantee.:- 2 Years from the date of installation. Make: V guard/ luminius / Microtek.4 KVA |
| 139 | Supplying, Installation, Testing & Commissioning of following capacity automatic voltage stabilzer copper wound wall mounted, single phase with range of 90-240 V along with wall mounting brackets & fitting. The job includes repairing the walls where necessary. Warrantee.:- 2 Years from the date of installation. Make: V guard/ luminius / Microtek.5 KVA |
| 140 | Extra length of copper pipe for outdoor unit and suitable size copper cable of required size for 1.5 Ton AC |
| 141 | Extra length of copper pipe for outdoor unit and suitable size copper cable of required size for 2 Ton AC |
| 142 | Suppylying and fixing of drain pipe for indoor |
| 143 | Supplying and fixing of 25 mm thick ply wood with round shaping at the center to fix exhaust fan on ventilator with required accessories. |
| 144 | Supplying and fixing of ceiling fan of following sweep with 2.25 mfd condenser and 1'-6\\" down rod on the existing fan hook with necessary connection from ceiling rose to fan using twin core copper wire. Make: Bajaj/Crompton/Havells/usha/Panasonic1200 mm sweep |
| 145 | Supplying and fixing two module stepped typeelectronic fan regulator on the existing modular plateswitch box including connections but excluding modular plate etc. as required.Make: Bajaj/Crompton/Havells/Anchor |
| 146 | Supplying and fixing of following sizes exhaust fan with PVC blade & Louvers complete set on existing holes on wall with necessary connection from ceiling rose to fan using 2 core flexible copper wire. Make: Bajaj/ Crompton /Havells/Anchor225mm/9\\" sweep exhust fan |
| 147 | Supplying & fixing of following PVC Gang Box.6+1 way |
| 148 | Supplying and installation of recessed/ surface mounted slim circular/square type down lighter of following rating. Makes : Wipro/ Jaquar/Philips/Crompton/Panasonica) 15 Watt |
| 149 | Supplying Installation Testing and commissioning of Pre-wired LED COBE Light / Strip Light Fitting Including connection with 1.5 sqmm FRLS PVC insulated copper conductor simple core cable and earthing etc. as required or as Approved by Site Engineer Make : panasonic /wipro/Philips) |
| 150 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed steel / PVC Conduit as required.Make: Anchor/Havells/Vguard/Polycab a) 3x10 sq mm |
| 151 | Supplying, fixing and commissioning of storage water heater (Geyser) of 5/6 ltr. Capacity along with PVC Pipe etc as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender