Tender For Annual Afloat Repair Works Of Csd Ch Akkara And Anchor Pontoon Xi At Iwt Maradu Terminal Kochi, During The Year 2026-27
Tender Value
7.57 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
9 days left
EMD
15160
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Afloat Repair Works Of Csd Ch Akkara And Anchor Pontoon Xi At Iwt Maradu Terminal Kochi, During The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Surface preparation of the above-water portion and complete deck area of CSD Champakkara and Anchor Pontoon XI, including onboard deck, side pontoons, central pontoon, cutter ladder, anchor foundations, side railings, hatches, doors, wheelhouse, engine room, inside of store compartments (Port & Starboard), discharge pipeline, forward winches, cutter ladder and spud cylinders, bollards, air vents, deck crane, pipelines, and all other onboard fitted equipment and structural components. The work shall include chipping, scraping, wire brushing, grinding, removal of rust, scale, old loose paint, oil, grease, and other contaminants, followed by thorough cleaning and surface preparation to the required standard for marine painting. The rate shall be inclusive of all labour, materials, consumables, tools, tackles, equipment, and incidental charges required to complete the work in accordance with approved marine standards. |
| 2 | Painting of the above-mentioned area with two (2) coats of anti-corrosive epoxy primer followed by two (2) coats of marine-grade epoxy paint, in accordance with approved marine painting standards. The work shall include thorough surface preparation, cleaning, removal of rust and loose paint, application of primer and epoxy finish coats, and all necessary labour, materials, consumables, tools, equipment, scaffolding (if required), and incidental charges to ensure a durable, corrosion-resistant, and uniform finish. The rate shall be inclusive of all labour and material costs. |
| 3 | Renewal of approximately 5 metres of discharge pipeline and bends of 250 mm diameter, Schedule 60, including dismantling and removal of the damaged/existing discharge pipeline and bends, supply, fabrication, fitting, welding, alignment, support and clamping, renewal of flanges, gaskets, fasteners, and other associated fittings as required, hydraulic testing of joints, and commissioning of the complete discharge line. The work shall include all labour, materials, consumables, welding electrodes, cutting, grinding, lifting and handling, surface touch-up painting of welded portions, and all incidental charges. The work shall be carried out in accordance with approved marine and dredger piping standards, ensuring the renewed pipeline is fully leak-proof, structurally sound, and operational. |
| 4 | Servicing of HSD suction and return line valves on both sides, including dismantling, inspection, cleaning, removal of sludge and deposits, lapping of valve seats, renewal of gland packing, seals, gaskets, O-rings, fasteners, discharge hose, and other worn-out components as required, reassembly, alignment, testing for smooth operation and leak-proof performance, and commissioning. The work shall include all labour, materials, consumables, tools, tackles, and incidental charges, and shall be carried out in accordance with approved marine engineering standards, ensuring the HSD suction and return line valves are made fully operational and leak-free. |
| 5 | Cost of Spare parts will be reimbursed on (Actual+10%) basis |
| 6 | Servicing of the swivel system due to improper rotation, including inspection, dismantling, cleaning, checking of internal components, lubrication, adjustment, and rectification of defects to restore smooth and proper rotation. The system shall be tested after servicing to ensure satisfactory operation. The quoted price includes all labour, materials, consumables, and equipment required to complete the work. Any major spare parts required after inspection shall be supplied only upon approval and charged separately. |
| 7 | Renewal of the port side canopy legs by removing the existing damaged legs and supplying and fitting new canopy legs of suitable specification. The work includes fabrication, alignment, welding, surface preparation, finishing, and proper securing of the new legs to ensure adequate support and stability of the canopy structure.The quoted price includes all labour, materials, consumables, welding, and equipment required to complete the work. |
| 8 | Repair of the dredge pump by renewal of the damaged seal, including dismantling of the pump, inspection of internal components, removal of the defective seal, supply and fitting of a new seal of the correct specification, reassembly, alignment, and functional testing to ensure proper operation and leak-free performance. The quoted price includes all labour charges. |
| 9 | Cost of Spare parts will be reimbursed on (Actual+10%) basis |
| 10 | Servicing of the Honda pump, including inspection, dismantling (if required), cleaning, checking of pump components, engine servicing, replacement of lubricants and filters (if required), adjustment, reassembly, and functional testing to ensure smooth and reliable operation. The quoted price includes all labour, charges |
| 11 | Cost of Spare parts will be reimbursed on (Actual+10%) basis |
| 12 | Servicing of the cutter winch pulley's , including dismantling, cleaning, checking of pulley components, lubrication, adjustment, alignment, and replacement of worn or damaged parts (if required). The pulley shall be reassembled and functionally tested to ensure smooth and safe operation. The quoted price includes all labour, charges |
| 13 | Cost of Spare parts will be reimbursed on (Actual+10%) basis |
| 14 | Renewal of damaged wippers front and back side of Operating cabin including labour and material charges |
| 15 | Renewal of damaged Gear oil MS pipe including labour and material charges |
| 16 | Repairing of damaged hand rail support frame of dredger with new ones including labour and material cost. |
| 17 | Reneval and welding of MS plate of thickness 5mm of ship building quality provision for unseen plate renieval after chipping, wire brishing etc, including labour and material cost. |
| 18 | Replacement of the hydraulic filter with a new one, including draining and removal of the existing hydraulic oil, removal of the old filter, inspection and cleaning of the filter housing, installation of a new hydraulic filter of the correct specification, refilling of hydraulic oil, bleeding (if required), and functional testing of the hydraulic system to ensure proper operation. The quoted price includes all labour,charges |
| 19 | Cost of Spare parts will be reimbursed on (Actual+10%) basis |
| 20 | Renewal of damaged MS pipe as per sample fitted to winch including labour charges |
| 21 | Cost of Spare parts will be reimbursed on (Actual+10%) basis Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender