Tender For Remaining Construction Of Ews, Lig Houses With G+3 Pattern And Internal Development As Per Model No. 4A(I) Of Chief Minister Jan Awas Yojana 2015 Issued By Government Of Rajasthan At Location Khasra No. 136 Village Tanawara, Phase Ii Distr
Tender Value
2.59 Crore
Estimated cost
Bid Submission
16 Sep 2026
24 days left
EMD
5.18 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Remaining Construction Of Ews, Lig Houses With G+3 Pattern And Internal Development As Per Model No. 4A(I) Of Chief Minister Jan Awas Yojana 2015 Issued By Government Of Rajasthan At Location Khasra No. 136 Village Tanawara, Phase Ii District Jodhpur (Part 7)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. |
| 3 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level IS 456-2000: 1:3:6 (1Cement :3 Course Sand :6 Graded stone aggregate 20 mm nominal size 1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size (Crusher Broken) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. All work up to plinth level IS 456-2000: 1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size) |
| 5 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding cost of centering shuttering and reinforcement IS 456-2000: 1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size). |
| 6 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Hot rolled deformed bars (IS : 1139) |
| 7 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level. |
| 8 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of formwork for superstructure up to 4.5 mtr above plinth, for: Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc. |
| 9 | Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall IS 1597 (Part-I) 1992 in : Cement Mortar 1:6 (1-Cement:6-Sand). |
| 10 | Random rubble dry stone Kharanja under floor. |
| 11 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level IS 456-2000: 1:3:6 (1Cement :3 Course Sand :6 Graded stone aggregate 20 mm nominal size |
| 12 | Brick work in partition in super structure up to third storey 7 Cm. thick (brick on edges) using bricks of class designation 75 with nominal hoop rainforcement (2 Nos 6mm MS bar) at every fourth course in Cement mortar 1:4 (1-Cement:4-coarse sand). |
| 13 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 12 mm thick. |
| 14 | 6mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 fine sand) |
| 15 | Colour washing of all shades to give an even shade including all scaffolding IS 6278-1971 : New work (two or more coats) with a base coat of white washing with lime. |
| 16 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: New work (Three or more coats). |
| 17 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete |
| 18 | Providing and laying brick Kharanja on roofs, with cement mortar 1:4 (1 Cement : 4 Coarse sand) mixed with 2 % integrated water proofing compound in square pattern complete in all respect as directed by engineer in-charge |
| 19 | Supplying and applying bituminous solution primer on roofs and/or wall surface at 0.24 litre per sqm. |
| 20 | P & F 1st quality Soluble Salt Vitrified Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufacture) with water absorption less than 0.08% and conforming to IS 15622 of approved make in all color and shade, laid with 20 mm thick CM 1 : 4 including grouting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm |
| 21 | Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13753 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slsurry including nicely finished joints using water proof joint filler power (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). |
| 22 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :For area of each slab up to 2001 to 5000 Sq. Cm : 25 mm thick slab. |
| 23 | Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing of IS 3316-1974 :Green/Black/Other granite Above 3601 Cm2 Slab |
| 24 | Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. |
| 25 | Supply & fixing of stainless steel pipe railing for ramp railing height, 90 cm. with 40 mm dia stainless steel pipe with 18 gauge with drop (vertical post) at 90 cm. C/C and intermidiate horizontal pipe with suitable height of same size and gauge with coupling, grinding and polishing & fix of master pieces as per required point as per approved design of Engineer incharge. |
| 26 | Providing and fixing pressed steel mitred door frames manufactured from commercial mild steel sheet of 1.25 mm (16 gauge) thickness including hinges jamb, lock jamb, head and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. Profile 'C' |
| 27 | Providing and fixing 30mm thick \\"RAJSHRI\\" or eq. BRAND FACTORY MADE SOLID BOTH SIDE PRELAM PANEL PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mmx19mm for stiles top & bottom rails M.S. frame shall have a coat of sheet primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded \\"Rajshri\\" prelim PVC 'C' channel of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45' angle on either side forming stiles and 5mm thick 95mm wide Rajshri Prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45' on the Inner side to from top and bottom rail and 115mm wide Rajshri Prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel, 10mm (5mmx2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail and bottom rail. Pannelling of 5mm thick both side Prelam PVC sheet to be fitted in the M.S. frame welded/sealed to stile and rails with 7mm (5mm+2mm) thickX15mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be struck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing (For internal shutters). |
| 28 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formaldehye resin, in glue both sides with approved steel fittings complete as per Annexure ‘A’ IS 2202 (Part I & II) 1999/1983. Commercial Veneer both side 30 mm thick shutter |
| 29 | Providing & fixing steel glazed doors, windows and ventilators shutters of standred rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of plain glass panes 4mm thick with copper glazing clips and special metal-sash putty of approved make, or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges of pivots steel handles and peg stay etc. as required. IS 1038-1983. windows side hung (Openable) |
| 30 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. |
| 31 | Accessories and Hardwares |
| 32 | Peeping Wyes 2 1 no. per flat |
| 33 | SS locker chain outside door @ 1 no per flat |
| 34 | Garbage bin @ 1 no per flat |
| 35 | Name Plate @ 1 No. per flat |
| 36 | Occupant boards @ 1 no. per block |
| 37 | Postal Locker @ 1 no per flat cabinet fo 16 |
| 38 | Applying priming coat: With ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood. |
| 39 | Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade : New steel work (two or more coats). |
| 40 | P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor : Size 530x410 mm. |
| 41 | P & F WVC Foot-rest (IS:2556 Mark) including cutting and making good the floor Size 250 x 125 x 25mm |
| 42 | P & F European type white glazed vitreous china Ist quality W.C. pan (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor. |
| 43 | P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : PVC with PVC bend as per IS : 7231 |
| 44 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 450 mm x 300 mm. |
| 45 | P & F kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up to floor level complete including cutting and making good the wall & floor IS 771 (Part-II) -1985. 1.0 mm thick stainless steel AISI -304 & IS 13983-1994 kitchen sink of approved make as per Engineer-in-charge with large waste coupling.Overall size Bowl size(inches) (inches)18 x 16 x 6 16x14x6 |
| 46 | Providing and fixing Polyethylene – Aluminium – Polyethylene (PE-AL-PE) Composite Pressure Pipe U.V. stablised with carbon black conforming to ASTMF – 1282 – 1995 for water supply including trenching and refilling etc. (External Work). |
| 47 | 1216 (16 mm OD) pipe |
| 48 | 1620 (20 mm OD) pipe |
| 49 | 2532 (32 mm OD) pipe |
| 50 | Providing and fixing Sperior quality ( Jaquar Continental/ Clarion) CP Brass fittings Complete as per direction of Engineer Incharge |
| 51 | Pillar Cock 15 mm nominal size |
| 52 | Swan neck pillar cock 15 mm nominal size |
| 53 | Bib Cock with long thread 15 mm nominal size |
| 54 | Angular stop cock with long thread 15 mm nominal size |
| 55 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15 mm Brass (IS:8931 marked). |
| 56 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design. 500 litres capacity. |
| 57 | P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant |
| 58 | (a) 110mm dia |
| 59 | (b) 160mm dia |
| 60 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 61 | Coupler (socket) |
| 62 | 110mm dia |
| 63 | 160 mm dia |
| 64 | Plain Tee |
| 65 | 110mm dia |
| 66 | 160 mm dia |
| 67 | Door Tee 110mm dia |
| 68 | Bend 45 110mm dia |
| 69 | Door Bend (Left & Right) 110mm dia |
| 70 | Vent Cowel 110mm dia |
| 71 | Socket plug 110mm dia |
| 72 | Door Cap 110mm dia |
| 73 | Pipe Clip 110mm dia |
| 74 | W.C. connector with lipring 110mm dia |
| 75 | W.C. connector bent type 110mm dia |
| 76 | Plain floor trap 110mm dia |
| 77 | P- Trap 110mm dia |
| 78 | Ring fitting 110mm dia |
| 79 | Construction of manhole in all type of soil inner size 90 X 60 Cm. thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring,making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C.flooring , 25 Kg. CI cover with frame of 40mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth upto 0.5mtr |
| 80 | Construction of chamber in all type of soil with 300 mm thick masonry in Cm 1:6 m 100mm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. inside size size 450 x 450mm upto depth of 0.5m & 15Kg CI cover with frame |
| 81 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make on surface ISI marked ( IS:14927 P - II ) PVC casing capping & it's accessories, round tiles,18 SWG M.S. box with earth terminal, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. |
| 82 | Short point (up to 3 mtr.) |
| 83 | Medium point (up to 6 mtr.) |
| 84 | Long point (up to 10 mtr.) |
| 85 | P & F 400 watt switch type dimmer including making connection testing etc. as required. |
| 86 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make on surface ISI marked ( IS:14927 P - II ) PVC casing capping & it's accessories, moulded PVC Modular box with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. |
| 87 | On board |
| 88 | Short point (up to 3 mtr.) |
| 89 | Medium point (up to 6 mtr.) |
| 90 | Long point (up to 10 mtr..) |
| 91 | P & F ISI marked flush type double line telephone jack including making connection testing etc. as required. |
| 92 | P & F ISI marked flush type coaxial T.V. socket including making connection testing etc. as required. |
| 93 | P & F ISI marked ding dong/musical chime bell including making connection testing etc. as required. |
| 94 | Supplying and drawing PVC jacketed with annealed bare copper inner conductor & tinned copper conductor shielding foam PE dielectric coaxial cable of approved make in existing surface or recessed conduit/casing capping including making connections as required. RG - 6 |
| 95 | Supplying and drawing PVC/ Polythene insulated and PVC sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. Tinned / annealed copper conductor taped &confirming to ITD specification S/WS -113C of approved make in existing surface or recessed conduit/casing capping. Unarmoured Telephone cable in existing surface or recessed conduit/casing capping. 2 pair |
| 96 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required.(a) 25mm |
| 97 | (b) 32 mm |
| 98 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 99 | Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet , making connection , testing , etc. as required. |
| 100 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required.(a) Single pole MCB 6 A to 32 A rating |
| 101 | (b) Triple pole & neutral MCB 40 A 63 A rating |
| 102 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. Single door (single phase) 8 Way |
| 103 | S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 8 SWG copper Wire Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender