Tender For Beautification And Painting Work For Administrative Building Of Block Cum Circle Office Under Goilkera Block.
Tender Value
49.83 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
1 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
West Singhbhum → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Beautification And Painting Work For Administrative Building Of Block Cum Circle Office Under Goilkera Block.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l.(5.10.7) |
| 2 | Providing 12 mm Thk. cement plaster(1:6) on inside walls with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I 5.7.3 |
| 3 | Providing 6mm cement plaster(1:4) in ceiling with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I 5.7.6 |
| 4 | Reinforced cement oncrete work in beams, suspended floors,Roofs having slope up to 15 degree landings, balconoes, shelves,chajjas, lintel, bands ,plain window sills , staircases and spiral stair cases above plinth level up to floor five level ,excluding cost of centering , shuttering , finishing and reinforcement: 1:1.5:3 (1 cement :1.5 coarse sand (zone -III): 3 Graded stone aggregate 20 mm nominal size ). 5.3.11 |
| 5 | Providing T.M.T. Reinforcement of following dia Rods as per approved design and drawing including carriage of M.S. Rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction and direction of E/I. 5.5.4 |
| 6 | Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). DSR 9.14D. |
| 7 | Providing and laying 25mm Thick kotah stone slab flooring of approved size , texture and colour laid over 19mm. Thick base of lime mortar (1:1:1) ( lime putty : surkhi : coarse sand ) and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubing and polishing to granolithic finish with approved quality of carborundum stone including cost of curing , taxes and royalty all complete as per building specification and direction of E/I.Size 600x600 5.6.19 |
| 8 | Providing and laying 6 mm precast precast SEMI GLAZED CERAMIC TILES in walls over 12mm mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes, and royalty all complete as per building specification and direction of E/I with commercial grade white 15cmX15cm tiles. 5.6.23.4 |
| 9 | Providing and fixing pressed steel door frames confirming to IS : 4351 manufactured from commercial mild steel sheet of 1.60mm thickness including hinges jamb, lock jamb bead and if required angle threshold of mild steel angle of section 50 X 25mm, or base ties of 1.60 mm pressed mild steel welded or rigidly fixed together by mechanical means including M.S pressed bult hinges 2.5mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pretreatment of the surface as directed direction of E/I.1.2-Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) DSR 10.14.12 |
| 10 | Supplying, fitting & fixing 35 mm th. Solid core type non-decorative single leaf FLUSH DOOR SHUTTERS in doors with block board core blended with high quality phenol formal dehydes synthetic resinboth side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts , handle,cleats aldrop, door stopper & sand blocks & taxes all complete as per detail drawing building specification & direction of the E/I 5.4.38 |
| 11 | Providing and fixing ISI:3564 marked aluminium die cast body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc complete. D.S.R 9.84 |
| 12 | Providing applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth copmlete .D.S. R. 13.26. |
| 13 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I 5.8.18 |
| 14 | Finishing walls with Premium Acrylic Smooth exterior paint with silicone additives \\"Snowcryl - XT\\" of M/S Snowcem India Ltd, or equivalent of required shade. D.S.R 13.47.1 New work (Two or more coats applied @1.43 ltr / 10sqm. Over and including base coat of water proofing cement paint Snowcem Plus or equivalent applied @ 2.20 kg./10 sq.m. ) |
| 15 | Providing 2 coats of SYNTHETIC ENAMEL PAINT of approved shade and make over STEEL SURFACE grills& railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I. 5.8.45 |
| 16 | Providing two coats of SYNTHETIC ENAMEL PAINT of approved shade and make over OLD WOODEN surface including cleaning the surface after removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification dirction of E/I.5.8.32 |
| 17 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roof terraces etc. consisting of following operations. D.S.R. 22.7.1 Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water proofing compound conforming to IS : 2645 over the RCC slab including cleaning the surface before treatment. |
| 18 | Providing & laying water proofing treatment in sunken portion of WCs, abathrooms etc. by applying cement slurru mixed with Armourcrete of M/S The Structural Water Proofing Company PVT. Ltd.or Tapecrete of M/s CICO Engg. Servce consisting of applying : D.S.R.- 22.5 (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with Armourcrete or Tapecrete @ 0.125 kg/ sq.m. This layer will be allowed to air cure for 4 hours (b)second layer of slurry of cement @ 0.242 kg/sqm mixed with Armourcrete or Tapecrete @ 0.126 kg/ sq.m. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. |
| 19 | Providing 12mm cement plaster(1:3) with clean course sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing taxes and royalty all complete as per building specification and direction of E/I. 5.6.10 (provided in sunk slab of toilets) |
| 20 | Providing & fixing on wall face unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socket ed pipes. 110 mm dia D.S.R 12.41.2 |
| 21 | SHOE - 110MM DSR 12.42.62 |
| 22 | Coupler - 110 MM DSR 12.42.1.2 |
| 23 | BEND - 110 MM DSR 12.42.5.2 |
| 24 | Providing and placing on terrace ( at all floor levels ) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (SINTEX, ELECTROPLAST, STAR, LOTUS OR EQUIVALENT having valid I.S.I. licence). DSR 18.48 |
| 25 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 5.3.8 |
| 26 | Brick edging - 7cm wide 11.4 cm deep to plinth protection with bricks of class designation 75 including grouting with cement mortar 1:4 (1 Cement : 4 fine sand)DSR 6.44 |
| 27 | ELECTRIFIXCATION Wiring for light point/ fan point/exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular switch ,modular plate, suitable GI box and earthing the point with 1.5sq mm FR PVC insulated copper conductor single core cable etc as required. 1.3.2 |
| 28 | Wiring for Twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with 2way modular switch ,modular plate, suitable GI box and earthing the point with 1.5sq mm FR PVC insulated copper conductor single core cable etc as required. 1.2 |
| 29 | Wiring for light/power plug with 2x 4 sq.mm FR PVC insulated, copper conductor ,single core cable in and surface/recessed PVC conduitalong with 1 No. 4 sq mm FR PVC insulated copper conductor single core cable for loop earthing as requried . 1.5 |
| 30 | Wiring for circuit / sub main wiring alongwith earth wire with the following sizes of PVC insulated, copper conductor , single core cable in surface/ recessed PVC coduit as required. 2X1.5 sq mm +1 x 1.5sq mm earth wire. 1.7.1 |
| 31 | 2X2.5 sq mm +1 x 2.5sq mm earth wire .1.7.2 |
| 32 | 4 X 6 sq mm +2 x 6 sq mm earth wire .1.7.10 |
| 33 | 2X10 sq mm + 1X 10 sq mm earth wire.1.7.5 |
| 34 | Supplying and fixing call bell / buzzer and piano type bell push,suitable for D.C. /A.C. single phase ,230 volts, complete as requried . 1.38 |
| 35 | Supplying and fixing suitable size GI box with moduler plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps moduler socket outlet and 5/6 amps moduler switch , connection painting etc.as reqd. 1.31 |
| 36 | Supplying and fixing suitable size GI box with moduler plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps moduler socket outlet and 15/16 amps moduler switch , connection painting etc.as reqd.1.32 |
| 37 | Supplying and fixing 20amp 240v SPN industrial type socket outlet , with 2 pole and earth metal enclosed plug top alongwith 20amps, G- series, SP MCB ,in sheet steel enclosure , on surface or in recess, with chained metal cover for the socket , outlet , and complete with connections , testing and commissioning etc . as requried . 2.18 |
| 38 | S/F of following sizes of PVC conduit alongwith the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required . 20 mm PVC coduit. 1.21.1 |
| 39 | 25 mm PVC coduit. 1.21.2 |
| 40 | Suppling and fixing following moduler type switch / socket on the existing switch box / cover including connection etc. as reqd. 5/6 amps switch 1.24.1 |
| 41 | 5/6 amps socket 1.24.4 |
| 42 | 1 or 2 module moduler boxes,base & cover plate. 1.27.1 |
| 43 | S/F Moduler type electronic fan regulator. 1.25 |
| 44 | S/F moduler type blanking plate.1.26 |
| 45 | Supply, Installation, Testing and Commissioning of following size fan 3 Blades confirming to IS:374:2019 including wiring the down rods of stranded for 230 V 50 Hz, single phase supply etc. complete as required1200mm (48\\") Ceiling Fan 9.4.1 |
| 46 | S.I.T.C. of following rating surface mounted LED tube light fitting suitable for 230V 50Hz, single phase supply etc. complete as required. 20/22 W LED Tube light 9.5.2 |
| 47 | S.I.T.C. of following rating surface mounted LED tube light fitting suitable for 230V 50Hz, single phase supply etc. complete as required. 15/16 Watt Led Bulb M-856 |
| 48 | S.I.T.C of following rating reccess/surface mounted LED round/square shape down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirmed to IS: 10322 part-5/section-2 or IEC-62722 with all necessary accessories as required.18/20 W LED Round Down light 9.3.4 |
| 49 | SANITARY WORK Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled devicde (handle lever), conforming to IS:7231, parryware/Hindware/with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid.D.S.R 17.2.1 |
| 50 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap, 10 litre low level white P.V.C. Flushing cistern with munally controlled device (handle lever) conforming to IS:7231 Parryware/ Hindware with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White Vitreous China Orissa pattern W C pan of size 580 X 440 mm with integral type foot rest.17.1.1 |
| 51 | Providing and fixing C.P. brass bib cock of approved conforming to IS 8931 A) 15mm nominal bore approved brand C.P. fittings 18.49.1 |
| 52 | Providing and fixing C.P.brass long body bib cock of approved quality conforming to standard and weight not less thain 690gms.18.51.1 |
| 53 | Providing and fixing C.P Soap Dish Holder having length of 138 mm breadth 102 mm, height of 75mm with concealed fitting arrangements, weighing not less than 110 gms 18.65 |
| 54 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings. 18.53 |
| 55 | Providing and fixing C.P. extentsion Nipples 15mm size with 12” BSP threads, 70mm length and 30 mm bredth and weight not less than 18gms 18.75.1 |
| 56 | Providing and fixing Mirror thickness required shape and size with plastic moulded frame of approved make and shade with 6mm thick Aluminum.17.32.2 |
| 57 | Providing and fixing Wash basin with C.I/M.S brackets, 15mm C.P. pillar cock 32mm C.P brass waste of cutting and making good the wtherever require. Falt back wash basin size550x400mm with single 15mm pillar tap 17.7.3. |
| 58 | Providing and fixing unplasticised P.V.C. connection pipe with c.p. nuts collar and bush of approved quality. A) 15 mm nominal bore with 45 cm length. |
| 59 | Providing And fixing 32 mm waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible Pipe 17.28.2.1 |
| 60 | provding and laying of 110mm dia. P.V.C. pipe for outlet of water to outlet drain including all accessories ,I.e lubricants, solventcement, clamp, ring, sockets etc.(SUPREME S.W.R.)M.R. |
| 61 | Providing and fixing PVC Pipe fittings with all accessories (supreme make) i) 110 mm Plaine Tee (Supreme) P.V.C.12.42.4.2 |
| 62 | ii) 110 mm Door Tee (Supreme) P.V.C.12.42.3.2DSR |
| 63 | iii) 110 mm Plaine Bend (Supreme) P.V.C .12.42.5.2DSR |
| 64 | iv) 110 mm Door Bend (Supreme) P.V.C. |
| 65 | v) 110 mm 45 degree offset (Supreme) P.V.C. |
| 66 | vi) 110 mm Cowel (Supreme) P.V.C. |
| 67 | vii) 110 mm Plaine Trap (Supreme) P.V.C. |
| 68 | Concealed work including cutting chases and making good the wall etc A) 15mm dia 18.8.1 |
| 69 | 20mm dia 18.8.2 . |
| 70 | Exposed on Wall A) 25mm dia 18.9.3 |
| 71 | 32 mm dia. 18.9.4 |
| 72 | 40mm dia 18.9.5 |
| 73 | Supllying and matarials with lobour for construction inspection chamber of designation class 75b brick deep 600x450 internal diamention having 250mm wall thickness in cement morter(1:6)including 12mm cement plaster (1:4)with punning on inside and cement plaster (1:6)with 600x450mm G.I. cover with frame (weight not less than 36k.g)in foundation and refilling all complete as per specification and direction of E/I.3.3.8 |
| 74 | (SEPTIXCK TANK) EARTH WORK IN EXCAVATION IN FOUNDATION Trenches in hard soil (vide classification of soil item -B) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I (5.1.1+5.1.2) |
| 75 | Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement compacted volume) 5.1.10 |
| 76 | Providing designation 75-A, BRICK FLAT SOLING joints filled with local sand including cost of watering,taxes and royalty all complete as per building specification and direction of Engineer Incharge 5.6.1 |
| 77 | Providing P.C.C. M-10 with nominal mix of (1:3:6) in Foundation with approved quality of stone metal grade III (53 to 22.4 mm size) and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixture, placing in position, vibration, striking, curing, taxes and royalty all complete as per building specification & direction of E/I. 5.3.3 |
| 78 | Providing designation 75A brick work in C.M. (1:4) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints,cost of screening materials raking out joints to 15mm depth, curing, taxes & royalty all complete as per building specification & direction of E/I.I. 5.2.2 |
| 79 | Providing 12mm cement Plaster (1:3) with clean coarse sand of F.M.1.5 with floating coat of neat cement in DADO including rounding of junctions with floor, curing, taxes and royalty all complete as per building specification and direction of E / I 5.6.10 |
| 80 | Centering and shuttering including strutting , propping etc. and removal of form for Foundatoins ,footings,bases of columns ,etc for mass concrete.5.3.17.1 |
| 81 | Centering and shuttering including strutting , propping etc. and removal of form for Suspended floors,roofs,landings ,balconies and access platform,with water proof ply 12 thick 5.3.17.20 |
| 82 | Supplying and fixing C. I. Cover without frame for MANHOLE.560MM DIA C.I. COVER (HEAVY DUTY)19.18.3/D.S.R |
| 83 | Making soak pit 2.m dia 3.0 m deep with 45x45 cm dry brick honey comb shaft with brick of class design 75& SW drain pipe 100mm dia 1.8m long complete as per standard desig 19.32 DSR |
| 84 | A) SAND , LEAD - |
| 85 | B) STONE CHIPS , |
| 86 | C) BRICKS , LEAD- |
| 87 | D) CEMENT |
| 88 | E)STEEL |
| 89 | G.S.T @ 18% |
| 90 | Labour Cess 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender