Tender For Improvement, Special Repairs And Civil Maintenance To Staff Quarters & Compound Wall And Beautification Of Dolphin Nose Lighthouse
Tender Value
1.47 Crore
Estimated cost
Bid Submission
08 Sep 2026
16 days left
EMD
2.95 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement, Special Repairs And Civil Maintenance To Staff Quarters & Compound Wall And Beautification Of Dolphin Nose Lighthouse
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared and all as directed including cost of all labour, tools & plants etc., and all other charges complete. |
| 2 | Dismantling/Demolishing of |
| 3 | a) Demolishing brick work or masonry walls manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge including the cost of all labours, necessary tools & plants and all other charges etc., complete.(for damaged latrine pedestals, Septic tank/Inspection chamber walls etc.) |
| 4 | b) Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) including the cost of all labours, necessary tools & plants and all other charges etc., complete.( for damaged PCC for Septic tank/Inspection chamber bottom if required, support walls on top, pathways, plinth protection etc) |
| 5 | c) Dismantling tile work in floors and skirting laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm all as per direction of Engineer-in-charge including the cost of all labours, necessary tools & plants and all other charges etc., complete.(For damaged tiles flooring/skirting, decorative tiles on top slab etc.) |
| 6 | d) Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sq. metres and below all as per direction of Engineer-in-charge including the cost of all labours, necessary tools & plants and all other charges etc., complete. |
| 7 | e) Dismantling of FRP Bio Toilets manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead and repairing the area with cement plaster 1:3 all as per direction of Engineer-in-charge including the cost of all labours, necessary tools & plants and all other charges etc., complete. |
| 8 | Earthwork & Backfilling |
| 9 | a) Earth work in excavation including Ordinary rock by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, removal of snake huts lead upto 50 m and lift upto 1.5 m, and excavate without damaging of existing cables/Pipes as directed by Engineer-incharge. |
| 10 | b) Supplying and filling in plinth with clean river sand under floors, including watering,ramming, consolidating and dressing complete. including cost of all labour, tools & plants, etc., complete. (For replacement of sand at Children's park area etc.) |
| 11 | Brickwork |
| 12 | a) Providing and laying of Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth for walls etc.,at all hights of Ist quality of approved as per I.G. 1977 in cement mortar 1:4 ( 1 cement : 4 coarse sand ) all as per drawing, all as per standard specifications and as directed including cost of all labour, materials, tools & plants, curing, scaffolding, etc. complete. ( for cable trench foundation, septic tank/Inspection Chamber replacement as per requirement at site, retaining perapet for Transformer etc.) |
| 13 | c) Providing and laying of half brick masonry with common burnt clay (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor Cement mortar 1:3 (1 cement :3 coarse sand) all as per drawing, all as per standard specifications and as directed including cost of all labour, materials, tools & plants, curing, scaffolding, etc. complete. (for surface drainage, platform partition etc.) |
| 14 | Concrete Works |
| 15 | a) Providing and laying in position cement concrete of specified grade for - All works up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) all as per drawing, all as per standard specifications and as directed including cost of all labour, materials,machine mixing, tools & plants, compaction with needle & flat vibrator,curing, scaffolding, etc. complete.( for base of cable trench, support wall around the transformer and base of surface drainage where ever necessary) |
| 16 | b) Providing and laying in position cement concrete of specified grade for - All works up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) including adding of admixture and the dosage is 200ml per bag of cement all as per drawing, all as per standard specifications and as directed including cost of all labour, materials,machine mixing, tools & plants, compaction with needle & flat vibrator,curing, scaffolding, etc. complete.(base for RWCT, I.C. and septic tank as per requirement at site) |
| 17 | c) Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, including the cost of centering, shuttering, finishing and Cement Concrete with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) including adding of admixture and the dosage is 200ml per bag of cement all as per drawing, all as per standard specifications and as directed including cost of all labour, materials, machine mixing, tools & plants, compaction with vibrator,curing, scaffolding, etc. complete.( for top slb damaged edges, sunshades etc.) |
| 18 | d) Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more all as per drawing, all as per standard specifications and as directed including cost of all labour, materials, tools & plants, scaffolding, etc. complete. |
| 19 | Repair Works |
| 20 | a) Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls & ceiling for staff quarters complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) including adding of waterproofing material and doasage as per manufaturer specifications all as per drawing, all as per standard specifications and as directed including cost of all labour, materials, mixing, tools & plants, curing, scaffolding, etc. complete. (for buildings) |
| 21 | b) Repair works to cracks in plastering / masonary / R.C.C. works/ lintels/ beams/ chajjas etc. cutting out cracks in 'V' section , cleaning out wetting, grouting with cement-sand slurry, 1:3( 1 Cement, 3 Sand) including mixing with water proofing compound as recommended by the manufacturer including supply of all materials, tools & plants, labours,curing, scaffoldings etc. complete as directed by the engineer in charge (for walls, compound wall and top perapet walls) |
| 22 | c) Providing and laying of 15 mm cement plastering in CM (1:3) (1 cement: 3 fine sand) finished with a floating coat of neat cement of mix for existing drainages,coping for staff quarters & compound wall where ever necessary after including Dismantling old damaged plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead all as directed including supply of all materials, tools & plants, labours, curing, scaffoldings, etc. complete as directed by the engineer in charge. |
| 23 | d) Providing and laying of 20mm thick Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating after Dismantling of old damaged/deteriorated cement plaster or skirting raking out joints where ever necessary and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead, hacking/pointing, cleaning, preparation of the surface etc. all as directed and as standard specifications and including cost of all materials, labour, tools & plants, curing for minimum 7 days from last pastering, necessary scaffolding for entire 30m height Lighthouse tower during the plastering etc complete. (for Cable trench walls, Septic tank outside portion and support wall near transformer). |
| 24 | For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running meter per coat. |
| 25 | Painting WorksApplying paint two or more coats of approved brand (Asian paints Appcolite Hi-gloss enamel / Berger Luxol Hi-gloss enamel) , 1st quality, colour, shade on previously painted interior surfaces of staff quarters to give an even shade over a coat of putty & primer wherever necessary includinig cleaning the surface from all dirt, dust and other foreign matter, scrapping of old paint,necessary repairs to scratches, loose matter and sand papering at all heights all as directed and as per standard specifications including cost of all labour, materials, tools & plants, scaffolding, bosum chair, and safety measures, all other charges etc., complete. |
| 26 | a) Two or more coats of Acrylic emulsion paint over a coat of water thinnable cement primer for interior surfaces of staff qtrs. at all heights walls & ceiling.(for Technical building and office & Recreation building) |
| 27 | b) Finishing walls with Acrylic Smooth exterior paint of required shade Two or more coat applied @ 1.67 ltr/10 sqm on existing cement paint surface for old work for outside staff quarters and compound wall. |
| 28 | Applying two or more coats of Synthetic Enamel paint of approved brand (Asian paints Appcolite Hi-gloss enamel / Berger Luxol Hi-gloss enamel) , 1st quality, colour, shade on previously painted surfaces of allied buildings to give an even shade over a coat of primer wherever necessary includinig cleaning the surface from all dirt, dust and other foreign matter, scrapping, remove loose matter, apply wood putty and sand papering at all heights all as directed and as per standard specifications including cost of all labour, materials, tools & plants, scaffolding, bosum chair, and safety measures, all other charges etc., complete. |
| 29 | a) wood and wooden surfaces for allied buildings at all heights including a coat of primer where ever necessary |
| 30 | b) Metal surfaces for allied buildings, Childrens park and for top hand rail of Lighthouse tower at all heights including a coat of steel primer |
| 31 | Repair of Wood |
| 32 | a) Repairing & Polishing on wood work with ready made wax polish of approved brand and manufacture for Old work should give the good look on wooden furniture surfaces and as including fill the gaps with wood putty, scrapping, cleaning, polishing after repairing of wooden legs including nails & screws all as directed including cost of all materials, labour, tools & plants and all other charges etc. complete. |
| 33 | b) Replacement 12mm thick marine plywood sheets in existing wooden cot of good shape & size of approved 1st quality fixed in position and as directed with all required fitting & fixtures including cost of all materials, labour, tools & plants and all other charges etc. complete.(for damaged cable duct, cot, dining table, chairs, teapoi etc.) |
| 34 | c) Replacement with new Providing & Fixing decorative high pressure 1.5 mm thick laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality after removing of existing damaged/deteriorated laminated sheet for teapoi all as directed including cost of all materials, labour, tools & plants and all other charges etc. complete. (For dining table, dining chairs, teapoi etc.) |
| 35 | Carpentary works |
| 36 | a) Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge and as including supply of all labour, tools & plants and all other charges etc complete. (for damaged door/window /CB and the replacement of damaged wood can take from the wood work item for frames & shutters as per requirement at site ) |
| 37 | b) Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) all as per standard specifications and as directed including cost of all labour, materials, tools & plants, etc. complete.(frames for doors, windows, flyproof shutters and CB. Approval should be taken with the submission wooden sample before start the work) |
| 38 | c) Providing and fixing 35 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. including ISI marked Stainless Steel butt hinges with necessary screws all as directed Including supply of all material,labours, tools & plants and all other charges etc., complete. |
| 39 | d) Providing and fixing of 35 mm thick glazed shutters for windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.complete all as per direction of Engineer-in-Charge, standard specifications and as directed including cost of all labour, materials, scaffolding,safety arrangements, tools& plants, and all other charges etc., complete. |
| 40 | e)Providing and fixing of Second class teak wood (35 mm thick shutters) panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge, standard specifications and as directed including cost of all labour, materials, scaffolding,safety arrangements, tools& plants, and all other charges etc., complete. (Note: Butt hinges and necessary screws shall be paid separately) |
| 41 | f) 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded solid PVC profiles, 5 mm (± 0.2mm) thick, having styles & rails (except lock rail) of size 95 mm x 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5mm thick solid PVC lock rail of size 115mm X 35mm out of which 75mm to be flat and 20mm to be tapered at both ends having 15mm solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125mm X 11mm including providing 5mm single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-Charge. Decorative finish (wood grained finish). All complete as per direction of Engineer-in-charge including the cost of all materials, labours, safety, tools & plants, lead & lift and all other charges etc., complete. |
| 42 | g) Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion |
| 43 | a) Replacement of damaged flyproof mesh by providing & fixing of new Fly proof stainless steel (Make REMOPEST) grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching 2nd class teak wood beading for existing fly proof shutters all fixed in position including removal of damaged flyproof mesh & replace as specified above without damaging the shutter all as directed and as standard specifications including the cost of all materials, labours, tools & plants and all other charges etc., complete (for existing fly proof doors/windows etc.) |
| 44 | c) Renewing glass panes (make Saint Gobain/AIS/Pilkington) for doors & windows with 1st class teak wood beading & putty wherever necessary fixing Float glass panes of thickness 4 mm in position after removing broken/damaged glass panes, disposal of all debris as directed including cost of all materials, labour, tools & plants and all other charges etc. complete. |
| 45 | Steel Works |
| 46 | a) Replacement of damaged as per existing M.S. sheets, including beautificational items upto 40kgs of each 1No works for childrens park Slide all as directed including the cost of all materials, labour, fabrication, welding, rivetting, hoisting, apply primer etc. complete. ( for 1No complete works for children park playing items) |
| 47 | b) Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes. |
| 48 | c) Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S. flat 10x5 mm, 10 cm long, forked at end 60cm apart (minimum three lugs to be provided), including necessary welding and applying a priming coat of approved primer on exposed surface etc. complete. all as directed including the cost of all materials, labour, fabrication, welding, rivetting, hoisting, apply primer etc. complete.( for framing to Precast covers to RWCT) |
| 49 | f) Replacement with new providing and fixing of 1.00 mm thick with zinc coating not less than 275 gm/m² corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.all as directed including the cost of all materials, labour, fabrication, welding, rivetting, hoisting, removal of damaged sheets etc. complete (for luggage room near security room). |
| 50 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire. all as directed by the engineer in charge, as per standard specifications and as directed including cost at all heights, all materials, all labours, tools & plants, scaffolding lead & lift, safety measures and all other charges etc., complete. |
| 51 | a) Raking out joints of stone masonry/Renovation of putty for decorative tiles on roof surface to the required width and depth, with due care and precaution, by mechanical / manual means, including preparing and cleaning the surface for re-pointing/ refilling of joints with C.M.(1:3) mixed with 2% integral water proofing compound where ever necessary including disposal of rubbish to the dumping ground within 50 metre lead. all as directed including cost of all materials, labour, tools & plants and all other charges etc. complete ( for Rear side of LHT/IQ on existing stone pitching and Renovation of putty for decorative tiles on roof where ever necessary) |
| 52 | b) Cutting holes up to 15x15 cm in R.C.C./brick/stone masonry walls, floors and roofs for passing drain pipe / GI angles etc. and repairing the hole after insertion of drain pipe/GI angles etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. all as directed including cost of all materials, labour, tools & plants and all other charges etc. complete. |
| 53 | Flooring Works |
| 54 | a) Replacement with new Providing and laying vitrified floor tiles of size 600x600 mm in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make (Johnson's/ Kajaria), in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. after removal of damaged existing flooring/skirting and as including hacking/pointing all as per standard specifications,including cost of all labour, materials, tools and plants etc. complete.(for Technical building) |
| 55 | b) Providing and laying Ceramic glazed anti skid floor tiles of size 400x400/300x300 mm where ever necessary for staff quarters toilet & steps work (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete after removal of existing damaged floors/skirting and all as per standard specifications, and including cost of all labour, materials, tools and plants etc. complete.(for bathroom/steps/existng floor tiles where ever necessary size as per existing floor) |
| 56 | c) Providing and fixing 1st quality ceramic glazed tiles for dado where ever necessary at bath rooms & kitchen walls conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade etc. complete after removal of existing damaged dado and as including hacking & cleaning the surface all as directed and as per standard specifications including cost of all labour, materials, tools and plants etc. complete. |
| 57 | Providing and fixing of 18 mm thick gang of Granite stone slab colour black(Area of slab over 0.50 sqm) Cherry/Ruby red saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels as per direction of Engineer-in-Charge, standard specifications and as directed including cost of all labour,tools& plants, and all other charges etc., complete |
| 58 | Replacement with new Providing & fixing of door/window/CB fittings & fixtures are instead of old damaged / deteriorated without damaging of existing wooden surfaces for |
| 59 | a) Providing and fixing ISI marked 125x75x4 mm aluminium butt hinges anodised (anodiccoating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: |
| 60 | b) Providing and fixing ISI marked 100x63x4 mm aluminium butt hinges anodised (anodiccoating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: |
| 61 | c) Providing and fixing ISI marked :75x63x4 mm aluminium butt hinges anodised (anodiccoating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. |
| 62 | d) Replacement Providing & fixing of new Anodised Aluminum fittinigs/fixtures of heavy duty with C.P. brass screws and as directed including cost of all materials, labour, tools & plants and all other charges etc. complete. |
| 63 | e) Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 64 | f) Providing and fixing 100 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 65 | g) Providing and fixing of 250x10 mm aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 66 | h) Providing and fixing of 150x10 mm aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 67 | i) Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 68 | j) Providing and fixing of 2nd class standard 125mm door/Window wooden stopper with ISI marked 100x58x1.90 mm oxidised M.S. pressed butt hinges with necessary screws etc. complete. (for door/Windows and fly proof shutters) |
| 69 | WATER SUPPLY |
| 70 | a) Replacement with new Providing and fixing 25 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) : all as directed including supply of all materials, tools & plants, labours, scaffoldings, safety arrangements, removal of damaged existing etc. complete as directed by the engineer in charge. |
| 71 | b) Replacement with new Providing and fixing 25 mm nominal bore G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : all as directed including supply of all materials, tools & plants, labours, scaffoldings, safety arrangements, removal of damaged existing etc. complete as directed by the engineer in charge. |
| 72 | c) Replacement with new Providing and fixing 15 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) : all as directed including supply of all materials, tools & plants, labours, scaffoldings, safety arrangements, removal of damaged existing etc. complete as directed by the engineer in charge. |
| 73 | d) Replacement with new Providing and fixing 15 mm nominal bore G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : all as directed including supply of all materials, tools & plants, labours, scaffoldings, safety arrangements, removal of damaged/rusting of existing etc. complete as directed by the engineer in charge. |
| 74 | e) Replacement with new Providing and fixing 15 mm dia nominal bore G.I. pipes/nipples complete with G.I. fittings including trenching and refilling etc. and cutting & making good for walls wherever required : all as directed including supply of all materials, tools & plants, labours, scaffoldings, safety arrangements, removal of damaged/rusting of existing etc. complete as directed by the engineer in charge. |
| 75 | Pipeline Works |
| 76 | a) Replacement with new Providing and fixing 20 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes (Make Ashirvad/Finolex) Internal work - Exposed on wall, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 77 | b) Replacement with new Providing and fixing 40mm P.V.C. waste pipe Semi rigid for sink or wash basin including P.V.C. waste fittings complete.all as directed including supply of all materials, tools & plants, labours etc. complete as directed by the engineer in charge |
| 78 | Sanitary Works |
| 79 | a) Replacement with new Providing and fixing of S.C.I. gully or nahani grating 100 mm dia (or SS jali) after removing of old deteriotated/damaged SS jali all as directed including cost of all labour, materials, tools & plants etc., and all other charges complete. |
| 80 | b) Replacement with new Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete after removal of old mirror including cost of all labour, materials, tools & plants etc., and all other charges complete. |
| 81 | c) Replacement with new Providing and fixing White Vitreous China Wash basin size 550x400 mm (Make CERA/Perryware) with C.I. brackets, 15 mm dia CP Brass single hole basin mixer 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required after removal of old damaged/deteriorated wash basin of complete fittings & fixtures all as per standard specifications, and as directed including cost of all labour, materials, tools & plants etc., and all other charges complete. |
| 82 | e) Replacement with new Providing and fixing C.P.Brass soap Dish Holder after removing of old deteriotated/damaged soap dish holder all as directed including cost of all labour, materials, tools & plants etc., and all other charges complete. |
| 83 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 84 | g) Replacement with new Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, (Make Perryware /Hindware) including removal of existing damaged pan with flush tank, cutting and making good the walls and floors wherever required: where ever necessary all as directed including cost of all labour, materials, tools & plants etc., and all other charges complete. |
| 85 | h) Replacement with new Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality (Make CERA/jaquar) conforming to IS standards and weighing not less than 690 gms. including fixing in position after removing of old deteriotated/damaged bib cock all as directed including cost of all labour, materials, tools & plants etc., and all other charges complete. |
| 86 | i) Replacement with new Providing and fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make (Make CERA/jaquar) conforming to IS:8931 where ever necessary including fixing in position after removing of old deteriotated/damaged stop cock all as directed including cost of all labour, materials, tools & plants etc., and all other charges complete. |
| 87 | j) Replacement with new Providing and fixing 15 mm nominal bore C.P. brass angle cock of standard design and of approved make (Make CERA/jaquar) where ever necessary including fixing in position after removing of old deteriotated/damaged stop cock all as directed including cost of all labour, materials, tools & plants etc., and all other charges complete. |
| 88 | k) Replacement with new Providing and fixing of (C.P.Brass) Health Faucet (full set) ( Make CERA/Jaguar) with 1.2m Stainless Steel Braided Rubber Hose , for 15mm nominal bore where ever necessary including fixing in position after removing of old deteriotated/damaged health faucet all as directed including cost of all labour, materials, tools & plants and all other charges etc. complete. |
| 89 | l) Replacement with new Providing and fixing C.P. brass shower rose with 15 or 20 mm Stainless Steel 305 mm 12 Inch Shower Arm with Wall Flange Shower Head ( Make CERA/Jaguar) where ever necessary after removal of old shower rose including cost of all labour, materials, tools & plants etc., and all other charges complete. |
| 90 | m) Replacement with new Providing and fixing C.P.Brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms ( Make CERA/Jaguar) where ever necessary after removing of old deteriotated/damaged towel rail all as directed including cost of all labour, materials, tools & plants etc., and all other charges complete. |
| 91 | n) Replacement with new Providing and fixing C.P.Brass towel ring with concealed fittings arrangement of approved quality and colour, ( Make CERA/Hindware) where ever necessary after removing of old deteriotated/damaged towel ring including cost of all labour, materials, tools & plants etc., and all other charges complete. |
| 92 | Plumbing Works |
| 93 | a) Providing and fixing on wall face 110 mm diameter 6Kg/cm2 unplasticised Rigid PVC soil/ waste pipes where ever necessary including fittings & fixtures (L-bend, bend,tee etc) of approved brand (Supreme/Finolex/Sudhakar) conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes of approved quality and fixing to wall with GI clamps, cutting walls and making holes, making good the same all as directed including cost of all labour, materials, tools & plants, removal of pipes etc. complete. |
| 94 | b) Replacement with new Providing and fixing PVC specials of 110mm dia PVC single tee/bend with door on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water/sanitory pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion where ever necessary all as directed including cost of all labour, materials, tools etc. complete. |
| 95 | c) Replacement with new Providing and fixing on wall face 75 mm diameter 6kg/cm2 unplasticised Rigid PVC waste water pipes where ever necessary including fittings & fixtures of approved brand (Supreme/Finolex/Sudhakar) conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes of approved quality and fixing to wall with GI clamps, cutting walls and making holes, making good the same where ever necessary all as directed including cost of all labour, materials, tools & plants, removal of pipes etc. complete. |
| 96 | d) Replacement with new Providing and fixing PVC specials of 75mm dia PVC single tee/bend with door on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water/sanitory pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion where ever necessary all as directed including cost of all labour, materials, tools etc. complete. |
| 97 | e) Replacement of PVC slotted vent cowl for 110mm diameter soil pipe where ever necessary all as directed including cost of all labour, materials, tools etc. complete. |
| 98 | b) Clearing the any blockages in water pipe line of quarters/gardening pipes etc. including removal of rusting/soil/any wastage in the pipes, apply necessary chemicals during clearing and intimate to the staff before apply. All as directed including cost of all materials, labour, tools & plants etc. |
| 99 | a) Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design including excavation on ordinary rock soils where ever necessary and as directed including cost of all labour, tools & plants etc. |
| 100 | b) Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) total weight of cover with frame to be not less than 38kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 all as directed including excavation on ordinary rock soils & back fliing where ever necessary and as directed including cost of all materials, labour, tools & plants and other charges etc. complete. |
| 101 | Providing and fixing of 12 mm thick solid toughened glass sheet for close the sky opening area & similar works, as per drawing and as directed including cost of fabrication, transportation, fixing in position, including supply of all labours, materials,tools & plants, and finishing, all other charges etc., complete |
| 102 | PART BProviding and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (The paver block shall have factory applied acrylic lacquer coating/ factory specialized surface colour pigments in red and yellow colour with glossy-mat finish. Laying pattern shall be approved by Engineer-in-charge) |
| 103 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 104 | Item Deleted |
| 105 | Item Deleted |
| 106 | Providing and applying Painting with synthetic enamel paint for kerb wall surfaces of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture(0.30cm width) 2 colours as directed by engineer in charge. including cost of all labour, materials, scaffolding, tools and plants etc., complete. |
| 107 | Supplying and stacking Moorum at site and Filling available stacked Moorum in trenches, plinth, sides of Kerb stone etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, at any lead and lift including cost of all labour, materials, scaffolding, tools and plants etc., complete. |
| 108 | PART CEarth work in excavation including Ordinary rock by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavated earth, removal of snake huts lead upto 50 m and lift upto 1.5 m, and excavate without damaging of existing cables/Pipes as directed by Engineer-incharge. |
| 109 | Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge. |
| 110 | Providing and laying in position Cement Concrete in foundation bed with 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) All work up to plinth level including mixing,laying, compacting with flat/needle vibrator, curing as directed by the engineer in charge including cost of all materials, labours, tools & plants,curing,safety measures and all other charges etc., complete. |
| 111 | Providing and laying 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) in position specified grade of reinforced cement concrete with adding of admixture and dosage as per manufacture specification including mixing,laying, compacting with flat/needle vibrator, curing and as directed by the engineer in charge including cost of all materials, labours, tools & plants,curing,safety measures and all other charges etc., complete. |
| 112 | a) Upto Plinth level |
| 113 | b) Above plinth level |
| 114 | c) Providing Steel reinforcement Fe-500D of approved brand for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level of tested Tor steel reinforcement of approved 1st quality as per drawing and as directed at all heights including cost of all labour, materials, tools & plants,safety measures and all other charges etc., complete. |
| 115 | Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar as per drawing and as directed at all heights including cost of all labour, materials, tools & plants,curing,safety measures and all other charges etc., complete. |
| 116 | a) upto plinth level with Cement mortar 1:4 (1 cement :4 coarse sand) |
| 117 | b) Above plinth level upto floor V level with Cement mortar 1:4 (1 cement :4 coarse sand) |
| 118 | c) Half brick masonry with Cement mortar 1:3 (1 cement :3 coarse sand) |
| 119 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m direction of Engineer-in-charge. including cost of all materials, labours, tools & plants and all other charges etc., complete. |
| 120 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm for under floors, in required thickness, consolidation by vibratory road rolling/ramming, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 121 | CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT |
| 122 | a) 20 mm thick Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. for exterior surfaces of brick masonry and Concrete surfaces plastering up to floor two level including finishing for smooth and even all as per standard specification and as directed at site including supply of all material,labours,scaffolding,curing, tools & plants,safety measures and all other charges etc., complete.(Exterior surfaces) |
| 123 | b) 15 mm thick cement plaster with CM 1:3 of brick masonry surfaces and Concrete surfaces for Interior plastering for walls as per standard specification and as directed at site including supply of all material,labours,scaffolding,curing, tools & plants,safety measures and all other charges etc., complete.(Interior Surfaces) |
| 124 | c) 12 mm thick plastering for ceiling surfaces with CM 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of Concrete surfaces for Interior plastering all as per standard specifications and as directed at site including supply of all material,labours,scaffolding,curing, tools & plants,safety measures and all other charges etc., complete.(Ceiling surfaces, for septic tank) |
| 125 | d) 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. including supply of all material,labours,scaffolding,curing, tools & plants,safety measures and all other charges etc., complete. (On top of Roof slab, plinth protection) |
| 126 | Item Deleted |
| 127 | Providing of Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete, Suspended floors, roofs, landings, balconies and access platform, Columns, Pillars, Piers, Abutments, Posts and Struts and Stairs, including cost of all labour, materials, tools & plants ,safety measures and all other charges etc., complete. |
| 128 | a) Foundations, footings, bases of columns, etc. for mass concrete |
| 129 | b) Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 130 | c) Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 131 | d) Suspended floors, roofs, landings, balconies and access platform. |
| 132 | Providing & fixing of WPC/PVC Frames and Shutters for doors and Ventilator |
| 133 | a) Providing and fixing Frame size 65 x 100 mm factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. |
| 134 | b) Providing and fixing 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 135 | c) Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge. |
| 136 | d) Providing and fixing factory made 30 mm thick Non decorative finish door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge. |
| 137 | Providing & fixing 5.5 mm thick glass louver panes with putty and glazing clips in steel doors, windows, clerestory windows,ventilator,louvers all complete . including cost of all materials, labours, tools & plants,safetty measures and all other charges etc., complete. |
| 138 | Providing of fittings & fixtures for doors of heavy duty with C.P. brass screws and as directed including cost of all materials, transportation, labour, tools & plants and all other charges etc. complete. |
| 139 | a) Providing and fixing 300x16x5 mm bright finished brass door latch (Aldrop) |
| 140 | b) Providing and fixing bright finished 250x10 mm brass tower bolts (barrel type) |
| 141 | c) Providing and fixing bright finished 250x10 mm aluminium tower bolts |
| 142 | d) Providing and fixing bright finished 125 mm brass handles |
| 143 | e) Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade. |
| 144 | f) Providing and fixing bright finished 125x85x5.5 mm (heavy type) brass butt hinges |
| 145 | g) Providing and fixing ISI marked 125x75x4 mm aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade. |
| 146 | h) Providing and fixing bright finished brass hanging type floor door stopper. |
| 147 | Providing and fixing fly proof stainless steel grade 304 wire gauge With 2nd class teak wood beading 62X19 mm, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. Including supply of all material,labours, tools & plants and all other charges etc., complete. |
| 148 | Providing & laying of Anti- Skid Ceramic floor tiles for Bath and Glazed wall tiles for Toilets |
| 149 | a) Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. including supply of all labours, tools, materials and finishing etc. complete as directed by the engineer in charge.(for Anti skid floor tiles) |
| 150 | b) Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.Including supply of all material,labours, tools & plants and all other charges etc., complete. |
| 151 | Providing and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: for New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including cost of all labour, materials, scaffolding, tools and plants etc., complete. |
| 152 | Finishing the walls with Two or more coats on new work for Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :including With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre including cost of all labour, materials, scaffolding, tools and plants,and all other charges etc., complete. |
| 153 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.including cost of all labour, materials, scaffolding, tools and plants,and all other charges etc., complete. |
| 154 | a) 20 mm nominal dia Pipes metre 513.75 |
| 155 | b) 25 mm nominal dia Pipes |
| 156 | c) 32 mm nominal dia Pipes |
| 157 | d) 40mm dia CPVC Pipe for external work including trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 158 | Providing and fixing (6kgf/cm2) on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.including all fittings & fixtures and as including cost of all labour, materials, tools and plants,and all other charges etc., complete. |
| 159 | a) 110mm Dia including all fittings & fixtures like bend, elbow, union, reducers etc. |
| 160 | b) Single tee with door 110x110x110 mm |
| 161 | c) Single tee without door 110x110x110 mm |
| 162 | d) 75mm Dia including all fittings & fixtures like bend, elbow, union, reducers etc. |
| 163 | e) Single tee with door 75x75x75 mm |
| 164 | f) Single tee without door 75x75x75 mm |
| 165 | Providing and fixing water supply fittings with all necessary fixtures and specials of approved first quality brand/manufacturer,colour (ISI make) as per the following items including cost of all materials, labours, tools & plants and all other charges etc complete. |
| 166 | a) Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock conforming to IS standards and weighing not less than 810 gms. |
| 167 | b) Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. |
| 168 | c) P/F CP Brass 15 mm dia bore Pillar Cock |
| 169 | d) Providing and fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of conforming to IS:8931. |
| 170 | e) P/F. PVC 15 mm dia Flexible connection pipe for W.Basin. |
| 171 | f) P/F 20 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. |
| 172 | g) P/F 25 mm nominal bore ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete. |
| 173 | h) P/F 40 mm dia non return valve nominal bore |
| 174 | i) P/F CP waste coupling with 32 mm dia pipe |
| 175 | j) Providing and fixing Health fauset full set |
| 176 | k) Providing and fixing 32 mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 177 | l) Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20mm nominal bore |
| 178 | m) Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25mm nominal bore |
| 179 | n) Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32mm nominal bore |
| 180 | o) 100mm SS Jali |
| 181 | Providing and fixing bath room fittings of approved first quality brand/manufacturer, colour /size with all necessary fixtures including supply of all materials, labours, Screws, tools and all other charges etc., complete. |
| 182 | a) Providing and fixing 600x450 mm beveled edge mirror of superior glass ( Make approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each including supply of all materials, labours, Screws, tools and all other charges etc., complete. |
| 183 | b) Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 184 | c) Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 185 | d) 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 186 | e) Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. including cost of all materials, labours, tools & plants and all other charges etc., complete.(2No tanks each capacity 1000Lit.) |
| 187 | Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: and all other charges etc., complete. |
| 188 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required and all other charges etc., complete.. |
| 189 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 190 | Providing & fixing of Urinals Partition board and G.I clamps complete, including fittings and brackets, cutting and making good the walls and floors wherever required : including supply of all material,labours, tools & plants and all other charges etc., complete. |
| 191 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern,(Make Parryware,hindware) including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.including supply of all material,labours, tools & plants and all other charges etc., complete. |
| 192 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. including supply of all material,labours, tools & plants and all other charges etc., complete. |
| 193 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design.Inside dimensions 455x610 mm and 45 cm deep for single pipe line.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. Including supply of all material,labours, tools & plants and all other charges etc., complete. |
| 194 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment including the cost of chemical emulsion including cost of all labour, materials, tools & plants etc., and other charges complete. |
| 195 | a)Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration including supply of all labours, tools, finishing etc. complete as directed by the engineer in charge. using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc., With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. including supply of all materials labours, tools, finishing etc. complete as directed by the engineer in charge.(The work should be done by the approved agency only) |
| 196 | Part D - ElectricalWiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 197 | Group - A (toilet block 1 & 2) |
| 198 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 199 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire(from DB to switch board) |
| 200 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire(from DB to 16A socket switch board) |
| 201 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 202 | 2 x 1.5 sq. mm (for kerb wall lighting) |
| 203 | 2 x 2.5 sq. mm (for kerb wall lighting) |
| 204 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 205 | 20 mm |
| 206 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 207 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box / wooden block including connections etc. as required. |
| 208 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (The bulk head light shall be installed on the kerb wall in a zigzag method, as per site requirement, with 4-metre centre-to-centre spacing.) |
| 209 | Installation, Testing and Commissioning of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
| 210 | Upto 450 mm sweep |
| 211 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 212 | 6 way, Double door (for Toilet block) |
| 213 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 214 | Single pole 6A (for Toilet block) |
| 215 | Single pole 16A (for Toilet block) |
| 216 | Double pole 6A (for Street Light junction box) |
| 217 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 218 | 40 A (Isolator) (for Toilet block) |
| 219 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (for Toilet block) |
| 220 | LED Down lighter (SMD Type) (System lumen efficacy >135lm/Watt) Supplying, Installation, Testing & Commissioning of LED Recessed/surface Down lighter (Round /square/Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range - 5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K/ 4000°K /5700°K / 6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/Name Engraved/Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body including trim |
| 221 | 12 -15 watt (for Toilet block) |
| 222 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt) Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). |
| 223 | 72 watt (for street light) |
| 224 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 225 | Upto 35 sq. mm |
| 226 | Supply of 10 Watt LED bulkhead light suitable for outdoor use for fixing on kerb wall, having minimum IP65 protection, weather-proof housing, operating on 220–240 V AC, complete with all standard accessories, with luminous flux (system flux) ≥1000 lumens, complete as required. |
| 227 | Supply of XLPE insulated, PVC sheathed, copper conductor, armoured cable, 2.5 sq.mm, 3 core, 1.1 kV grade.(for Toilet Block) |
| 228 | Supply of 200 mm (8 inch) exhaust fan suitable for bathroom / toilet ventilation, complete with mounting frame, louvers/shutter and standard accessories, conforming to relevant IS standards, complete as directed by the Engineer-in-Charge. |
| 229 | Supply of outdoor junction box for lighting of size 300 × 200 × 100 mm (H × W × D), made of weather-proof material, having minimum IP65 protection, complete with all standard accessories, as required. |
| 230 | Providing, laying and fixing following dia G.I. pipe (75 mm medium class) in RCC Road complete with G.I. fittings including trenching (75mm deep in RCC road) and re-filling with RCC materials etc as required and with necessary machinery, tools, etc., , complete in all respects as directed by the Engineer-in-Charge. |
| 231 | Installation of junction box on existing street light pole, including fixing with suitable U-type GI strip clamp of 3″ dia, complete with necessary SS nuts, bolts and washers, drilling where required for providing suitable holes for cable entry and exit, proper alignment and secure mounting, complete in all respects as directed by the Engineer-in-Charge. |
| 232 | Supply and installation of 16A backlite connector and MCB rail inside the junction box, including necessary nuts, bolts and screws, complete in all respects as directed by the Engineer-in-Charge. |
| 233 | Dismantling the existing junction box, MCB and connector from the pole and isolating the existing cable, complete in all respects as directed by the Engineer-in-Charge. |
| 234 | Supplying and making end termination with PVC compression gland and copper lugs for existing 3-core 4 sq.mm PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 kV grade (street light cable), including crimping, dressing, testing and commissioning, complete in all respects as required and as directed by the Engineer-in-Charge. |
| 235 | Removing paint from the existing street light pole using emery paper sheet, complete in all respects as directed by the Engineer-in-Charge. |
| 236 | Supply and painting of one coat of primer and two coats of aluminium paint on the existing 4-metre-long GI pole and arm, including surface preparation, complete in all respects as directed by the Engineer-in-Charge. |
| 237 | Providing and fixing a template of suitable size for bulk head light on the concrete kerb wall, including placing the template in the shuttering before concreting with necessary supports, and providing suitable pipe for cable entry from the backside of the kerb wall, to enable proper fixing and wiring of the bulk head light, complete in all respects as directed by the Engineer-in-Charge. |
| 238 | Supply and laying of 8 SWG bare copper wire from earth pit to distribution board, laid through suitable route including surface / buried as required, with necessary saddles, clamps, fixing accessories, connection to earth electrode and distribution board earth terminal, dressing, termination, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. |
| 239 | Supply and laying of 25 mm dia Green suction hose pipe from ground level to Toilet block distribution board for routing of 2.5 sq.mm copper cable and 8 SWG copper wire, including necessary cutting, bending, fixing with suitable clamps/saddles, providing end protection, making entry and exit holes wherever required, proper alignment, and securing in position, complete in all respects as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender