Tender For Supply Installation Testing And Commissioning Of Fire Detection & Alarm System For Buildings At Barc, Vizag Main Site And City Office
Tender Value
98.69 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
34 days left
EMD
1.97 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation Testing And Commissioning Of Fire Detection & Alarm System For Buildings At Barc, Vizag Main Site And City Office
BOQ
| Sl. No. | Item Description |
| 1 | SITC of 2 LOOP FIRE ALARM CONTROL PANEL AND ASSOCIATED DEVICESCertification: UL/FM or EN54 certifiedNumber of Loops per panel: 2; each having capacity to drive minimum 100 loop powered Multi criteria detectors and 8 Loop powered sounders with strobe together. Loop cable length >= 1500 meter using 1.5 sq mm shielded twisted pair cable.Redundancy: CPU Redundancy, Loop card / Loop card circuitry Redundancy, Power Supply Module RedundancyThe above redundancies can be Acheived by suitable hardware configuration (Included in the quoted price). In case of failure of any of the above mentioned primary component, the redundant component (or Panel) shall come in line, without any manual intervention.- Dual Ethernet Network card / connectivity redundancy (may require manual intervention).Communication:1. Ethernet communication with the required software installed on computer (price shall include cost of perpetual license for such software), which enables the computer to configure the panel, read program, read status, event logging, etc with graphical user interface. Multiple Panel in one screen. Required perpetual license for PC software must be provided.2. Modbus or equivalent open source communication protocol for communicating the status of fire alarm system to the remote computer.3. Communication between Fire alarm control panels and repeater for Sharing alarms, faults, and supervisory signals, Redundant communication paths can be configured (Loop connectivity).Emergency Power: Dedicated battery backup for 48 hour (normal operation) & minimum 30 min under alarm conditionInput/ Output: 4 Relay outputs and 2 inputs shall be provided with the panel. In case, the panel does not have the facility to install these I/O modules, alternatively loop powered I/O module(s) shall be provided, which should have total 4 inputs & 2 outputsOther Important requirements:- Auto dialling communicator, In-built buzzer. LCD Dsiplay In panel:LCD (minimum 2 line x 40 char) 80 characters(atleast) alphanumeric display with key Pad/touch screen- Suitable for Class-A (fault-tolerant loop) type of wiring- Facility for simulating the fire condition for testing purpose- MS enclosure for the FACP with front door fitted with acrylic sheet. Triplicate earthing terminals for safety, shield and signal grounding- Two coat of anticorrosive paint followed by two coat of synthetic enamelled- Seismic qualification. If OEM panel is not seismically qualified, the panel may be installed in Seismically qualified enclosure. |
| 2 | 4 LOOP FIRE ALARM CONTROL PANEL AND ASSOCIATED DEVICESCertification: UL/FM or EN54 certifiedNumber of Loops per panel: 4; each having capacity to drive minimum 120 loop powered Multi criteria detectors and 8 Loop powered sounders with strobe to gather. Loop cable length >=1500 meter using 1.5 sq mm shielded twisted pair cable.Redundancy: CPU Redundancy, Loop card / Loop card circuitry Redundancy, Power Supply Module RedundancyThe above redundancies can be Acheived by suitable hardware configuration (Included in the quoted price). In case of failure of any of the above mentioned primary component, the redundant component (or Panel) shall come in line without any manual intervention.- Dual Ethernet Network card / connectivity redundancy (may require manual intervention).Communication:1. Ethernet communication with the required software for computer, which enables the computer to configure the panel, read program, read status, event logging, etc with graphical user interface. Multiple Panel in one screen. Required perpetual license for PC software must be provided.2. Modbus or equivalent open source communication protocol for communicating the status of fire alarm system to the remote computer.3. Communication between Fire alarm control panels and repeater for Sharing alarms, faults, and supervisory signals, Redundant communication paths can be configured (Loop connectivity).Emergency Power: Dedicated battery backup for 48 hour (normal operation) & minimum 30 min under alarm conditionInput/ Output: 4 Relay outputs and 2 inputs shall be provided with the panel. In case, the panel does not have the facility to install these I/O modules, alternatively loop powered I/O modules shall be provided, which should have total 4 inputs & 2 outputsOther Important requirements:- Auto dialling communicator, In-built buzzer. LCD Dsiplay In panel:LCD (minimum 2 line x 40 char) 80 characters(atleast) alphanumeric display with key Pad/touch screen- Suitable for Class-A (fault-tolerant loop) type of wiring- Facility for simulating the fire condition for testing purpose- MS enclosure for the FACP with front door fitted with acrylic sheet. Triplicate earthing terminals for safety, shield and signal grounding- Two coat of anticorrosive paint followed by two coat of synthetic enamelled- Seismic qualification. If OEM panel is not seismically qualified, the panel may be installed in Seismically qualified enclosure. |
| 3 | FIRE ALARM REPEATER PANEL (ACTIVE)-UL/FM or EN54 certified- Active Type, shall be compatible to receive data from FACPs- Easily readable, bright display- MMI shall be the same as the main Controller- Audio & visual Alarms during fire- Display of Alarm & Fault similar to the Main Panel- User authentication- Single point failure in the cable shall not affect the performance and shall intimate the exact location of failure in all Panels- 24Hrs back up time for normal condition and minimum 30 min back-up time for fault/alarm condition, |
| 4 | MULTI CRITERIA DETECTOR- UL/FM or EN54 certified- Combination of Smoke detection and heat detection- Once in every 6 months during 5 year warranty, Testing of detector for Smoke and Heat (rate of rise or temperature set point) by standard method must be considered in the detector cost.- Intelligent, addressable, - Thermal sensor shall be able to detect both maximum temperature Pre-defined (as per standards) and the rate of rise temperature- Inbuilt isolator (or isolator base to be provided), Drift compensation facility, - False alarm immunity and a superior signal to noise ratio, Automatic contamination compensation, Un-authorized detector removal detection, Adaptability with surrounding temperature fluctuations, built-in false alarm filtering provision , - Detection of both smouldering fires and open fires - Operating conditions: +15°C to +45°C , up to 95% RH (non- condensing)- Quoted price shall include all required accessories (like base box, etc.) as applicable- Types of fires: as per EN-54-29 or as mentioned in equivalent UL standard. - Quoted price shall include all required accessories (like base box, etc.) as applicable |
| 5 | MANUAL CALL POINTS-UL/FM or EN54 certified- Double action, re-usable, addressable, Loop powered - Shock and vibration resistant, polarity insensitive- LED status indication, in-built isolator(or isolator base to be provided)- Quoted price shall include all required accessories (like base box, etc.) as applicable |
| 6 | I/O MODULE- EN-54 certified-UL/FM or EN54 certified- Intelligent, addressable, Class X type (Support fault-tolerant loop wiring), built-in isolator(or isolator base to be provided), polarity insensitive- allow non-addressable devices to be integrated into an addressable fire alarm system- LED status indicator- 1 NO + 1NC contacts 1 Amp or more current rating per module- Loop powered and actuated by control panel- Contact output: Programmable, fail safe, Bi stable potential free change over contact: 1 set |
| 7 | RESPONSE INDICATOR- Complying to EN-54 or UL- Shall start flashing when the detector in that particular area / zone has been activated- LED status indicator- Loop powered- Quoted price shall include all required accessories (like base box, etc.) as applicable |
| 8 | SOUNDER / HOOTER ALONG WITH STROBE/ FLASHER-UL/FM or EN54 certified- Addressable, loop powered sounder along with strobe- In-built isolator (or isolator base to be provided)- SPL should be minimum 95 dB or more, adjustable SPL- Option of different tones for alarm detection in different floors- should draw minimum power from loop, at least 15 loop powered sounders in the same loop,- Sounder shall be combined with a Flasher - strobe shall be wall/celling mounted with 360 deg. Viewing angle- Quoted price shall include all required accessories (like base box, etc.) as applicable |
| 9 | FIRE FIGHTER TELEPHONE CONSOLE- This system allows firefighters and others to communicate with one another during emergency situations.- Standalone unit containing the systems master handset & power supply- Connectivity for 5 or more zones, with status indication of each zone- Full duplex audio, Conference call facility- In-built or add -on Power back-up of at least 120 V*A*hr. shall be provided with protection to Deep discharge, short, high temperature, - Suitable charging & monitoring system for emergency - Complying to BS 5839-9 (emergency voice communication systems) or equivalent standard.- Supports 500 mtr or more cable length per zone- Monitored handsets, indicate the location of the call and provide an audio visual indication to alert the operator’s attention.- Master telephone handset with a push to talk button and a Flexible-coiled five (5) foot cord - minimum size of the wire shall be not less than 0.8 sq.mm for electronic-circuits and 1.5sq.mm for electrical circuits & 14AWG for grounding- Stainless Steel Flush Mount enclosure.- 230 V AC mains power supply. |
| 10 | FIREMAN'S TELEPHONE HANDSETTelephone handset shall have 6.5 / 4.5 mm male jack mm jack for inserting in fireman telephone jack at various field locations.- The telephone handset shall be rugged & reliable. |
| 11 | FIREMAN TELEPHONE JACK- Telephone Jack to communicate with the central Fire Fighter Telephone console by using the portable handsets. - Wall mount SS-304 Enclosure, front face size between 100-200 sq cm, thickness less than 8 cm. - 6.5 / 4.5 mm Jack with Gold plated contact (compatible to telephone handset)- Fireman Phone Jack shall me printed in Red colour & Bold letters, with a symbol of telephone on front face of enclosure- Every part of the Fireman telephone jack assembly shall be rugged & rustproof - Addressable |
| 12 | FLAME DETECTOR- For detection of smokeless liquid and gas fires, as well as smoke-forming open fires that result from the combustion of carbonaceous materials in hazardous areas in zones 1 and 2.- high immunity to electromagnetic interference, sunlight, thermal radiation & moisture- Multiple in-built sensors for faster detection and prevention of false detection.- Detection range: 90°, Detection distance: 25 mtr or more- Configurable threshold level, Delayed alarm, System status indication, - Addressable/ separate module for interface with main panel through the loop shall be considered in this.- Quoted price shall include all required accessories (like base box, etc.) as applicable |
| 13 | 1 PAIR x 1.5 SQ MM SHIELDED ARMOURED FRLS CABLE- Conductor: 1.5 sq mm, Class-5 / Class-2, Stranded Tinned Copper conductor.- Insulation: Extruded-PVC , Type C as per IS5831/84, contrast colour for each core of the pair.- Approx twist per meter: 10- Shielding: Al Mylar Tape of minimum 0.05 mm thickness with minimum 25% overlap, - Drain wire: 0.5 sq mm, multi-strand, Annealed Tinned Copper, - Inner sheath: 0.5 mm Extruded-PVC ST-2,- Outer Sheath: minimum 0.5 mm Extruded-PVC ST2 (Flexible), FRLS, Rodent repellent additives- Armour: GI round wires as per IS-3975- Laying by wall clamping with saddle, max distance between clamps 500 mm.- Ferruling & Lugging (Copper) of each cable termination with documentation.- Material supply & installation for Cable glanding, ferruling and other standard accessories required for cable termination shall be considered in this scope. |
| 14 | OPTICAL FIBER CABLE & ACCESSORIES- Supply & Laying of Armoured fiber optic cable 24 Core: 1000 meter Suitable for outdoor application, - Wall mount LIU: 4 no (Reputed make) , 24 port, preferably LC connectors, Complying to relevant national or international standard: 4 no. (installation & Splicing) - Suitable Fiber Patch cords- Cable properties: Single mode, Wet core, Armoured (steel tape), High crush & rodent resistant, Direct burial- Wall mount LIU: LC connectors, Rust proof, Reputed make- Fiber to Copper converter (media converter): 4 sets suitable for connecting Fire alarm control panel & repeater panel |
| 15 | HDPE PIPE -SITC- IS:4984-2016, - Material: HDPE, DENSITY of 940.0-960.0 KG/M3- Size: 40 mm OD,- Min wall thickness 2 mm - Pressure rating: 4.2 kg/cm2, Shall show no signs of localized swelling, leakage or weeping, and shall not burst during test- Carbon Black content: max 3%- The internal & external surface of the pipe shall be smooth, clean and free from grooving and other defects. Supply & Installation |
| 16 | SMOKE DETECTOR TESTING SPRAY- Simulates smoke for testing of smoke detector, .- Volume: 180 ml or more- non-toxic |
| 17 | EXCAVATION WORKDigging of Hard soil and backfilling with sand & brick protection, for laying of cable with proper route marking. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 34 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 43 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender