Tender For Refurbishment Of Electrical Wiring And Lighting Of Cirus Rcb, Workshop, Jetty And Apsara-U
Tender Value
38.99 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
28 days left
EMD
77993
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Refurbishment Of Electrical Wiring And Lighting Of Cirus Rcb, Workshop, Jetty And Apsara-U
BOQ
| Sl. No. | Item Description |
| 1 | Supply and Installation of VTPN DBs as per technical specifications |
| 2 | Supply of 8 way DB as per tech spec (rating of I/C & O/G MCCB/MCB may vary for each DB) |
| 3 | Installation of DB |
| 4 | Supply & installation of LED lighting fixtures and poles as per technical specification.: |
| 5 | Supply of 4ft functional batten with 1 x 18W LED tube |
| 6 | Supply of 4ft functional batten with 2 x 18W LED tube |
| 7 | Installation of single/double TL fitting |
| 8 | Lowering of existing single/double TL fitting by 1-2 meter alongwith supply & installation of all required accessories (2Xround box, 2Xball socket and 2Xdown rods, other) |
| 9 | Supply of Medium bay light, 70 Watt |
| 10 | Installation of Medium bay light |
| 11 | Supply of Street Light fitting, 70 Watt |
| 12 | Installation of street light fitting |
| 13 | Supply of Terrace light fitting, 40 Watt along with IP 68 terminal box |
| 14 | Installation Terrace light fitting along with IP 68 terminal box |
| 15 | Supply of Emergency torch lights with battery |
| 16 | Supply of 'EXIT' lights as per tech spec |
| 17 | Installation of 'EXIT' lights |
| 18 | Supply & installation of double 'J' type street light pole |
| 19 | Supply & installation of wall mounted 'J' type bracket /pole with IP 68 terminal box |
| 20 | Supply and installation of metal body fans as per technical specification |
| 21 | Industrial Pedestal Fans 18 '', 100 Watt |
| 22 | Industrial Wall Fans, 18 '', 100 Watt |
| 23 | Domestic Wall Fans, 18 '', 80 Watt |
| 24 | Ceiling fan, 1200mm sweep, 28-30 Watt, BLDC type |
| 25 | Assembling and Installation of fans |
| 26 | Point wiring for lighting fixtures and fans including supply of all materials as per technical specification, in FRP conduit or Aluminium casing capping or existing conduit as per technical specification |
| 27 | Circuit wiring from LDB to switch board using 2.5 sq.mm, FRLS copper wire (average length 25 Mt, Ph., N. & E) in normal area |
| 28 | Point wiring for looped switch board using 2.5 sq.mm FRLS copper wire (Average length 10 Mt, Ph., N. & E) |
| 29 | Primary point wiring for lighting fixtures using 1.5 sq.mm FRLS copper wire (Average length 10 Mt, Ph., N. & E) |
| 30 | Secondary point wiring for lighting fixtures using 1.5 sq.mm FRLS copper wire (Average length 3 Mt, Ph., N. & E) |
| 31 | Point wiring for wall mounting fans using 2.5 sq.mm FRLS copper wire (Average length 10 Mt, Ph., N. & E) |
| 32 | Point wiring for ceiling fans using 1.5 sq.mm FRLS copper wire (Average length 8 Mt, Ph., N. & E) |
| 33 | Point wiring for exhaust fans/fan coil units/terrace lights using 2.5 sq.mm FRLS copper wire (Average length 10 Mt, Ph., N. & E) |
| 34 | Supply, installation and testing of following modular switches & sockets with modular plate and box as per technical specification |
| 35 | Supply of 4 nos. of 6A power socket, 4 nos. of 6A switches, 12 module plate and box (PP1) and 4 no 6A plug top |
| 36 | Supply of 2 nos. of 6/16A power socket, 2 nos 16 A switches, 6 module plate, box (PP2) and 2 nos 16 A plug top |
| 37 | Supply of 20A metal clad plug socket along with suitable MCB , box and plate for AC . |
| 38 | Supply of 1 no. of 6A power socket, 1 no. of 6A switches, 2 module plate, box (PP3) |
| 39 | Installation of above 5.1 to 5.4 |
| 40 | Point wiring for power sockets including supply of all materials as per specifications, in FRP conduit or Aluminium casing capping or existing conduit as per technical specification |
| 41 | Primary points using 4 sq.mm FRLS copper wire, (From PDB to first socket in the room with average length of 20 Mt, Ph., N. & E) in normal area |
| 42 | Secondary power point using 2.5 sq.mm FRLS copper wire, (from first socket to the remaining sockets in the room, average length 6 Mt, Ph., N. & E) |
| 43 | Primary Point for AC using 4 sq.mm FRLS copper wire(From PDB to socket, Average length - 20 Mt, Ph., N. & E) |
| 44 | Supply, installation of following Modular switch boxes with face plate and switches (lighting circuits only) as per technical specification |
| 45 | Supply of 1 module plate and box |
| 46 | Supply of2 module plate and box |
| 47 | Supply of4 module plate and box |
| 48 | Supply of 6 A switch |
| 49 | Supply of Blank module |
| 50 | Installation of plate, box and switches |
| 51 | Cable and end termination as per technical specification |
| 52 | Supply of 3.5 core, 6 Sq.mm, 1.1 kV, Copperconductor, XLPE insulated, armoured FRLS cable |
| 53 | Installation of 6 sq mm,3.5 core cable |
| 54 | Installation of lugs, glands and Termination of 3.5 core 6 sqmm copper cable (1 set = R, Y, B, N) |
| 55 | Supply and installation of Aluminum casing capping as per technical specification |
| 56 | Supply of 25 X 12 mm |
| 57 | Supply of 38 X 38 mm |
| 58 | Installation of Aluminum casing capping |
| 59 | Supply and installation of copper wire 10 swg for earthing |
| 60 | Supply and installation of copper wire 16 swg for earthing |
| 61 | Supply and installation of 150 mm ladder type FRP cable tray, with cover and all required accessories as per technical specification |
| 62 | Supply |
| 63 | Installation |
| 64 | Supply and installation of FRP conduits, with all required accessories as per technical specification |
| 65 | Supply of 20 mm conduit |
| 66 | Supply of 25 mm conduit |
| 67 | Installation of both sizes |
| 68 | Miscelleneous items |
| 69 | Suply and installation of brass saddle size 50X6 mm |
| 70 | Suply and installation of brass saddle size 25X6 mm |
| 71 | Brazing of copper strips of sizes 50X6 mm and 25X6 mm |
| 72 | Repair and painting of lighting arrestor/air terminal |
| 73 | Supply and installation (welding, cutting, shaping, painting) of 200 kg of MS item |
| 74 | Prepare and handover complete drawing and database for the as built & installed circuit & distribution |
| 75 | Removal of exiting Panel, busbar boxes, ICTPs, Distribution boards, conduits, wirings over the surface, segregation of useful items and disposal of the same at TVS stores as per tech spec Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 28 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 32 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender