Tender For Construction of Of 08 Bedded Mahila Barrack At Bop Mkt Of 149 Bn (Now 35Bn) Bsf Under Shq Bsf Jsmr-S (Sh: electrical installation & Fans)
Tender Value
7.92 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
2 days left
EMD
15846
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Of 08 Bedded Mahila Barrack At Bop Mkt Of 149 Bn (Now 35Bn) Bsf Under Shq Bsf Jsmr-S (Sh: electrical installation & Fans)
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. i) Group B |
| 2 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 3 | Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 4 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (i) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 5 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 6 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel / PVC conduit as required. (i) 4X6 sqmm |
| 7 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair (Make : Havells / Polycab / R R KABEL / Finolex ) |
| 8 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. |
| 9 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (i) 20 mm |
| 10 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm |
| 11 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 32 mm |
| 12 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 13 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 14 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required. |
| 15 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75 mm X 75 mm) |
| 16 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch |
| 17 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet |
| 18 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet |
| 19 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antena socket outlet |
| 20 | Supplying and fixing PVC batten/ angle holder including connection etc. as required. |
| 21 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required |
| 22 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door |
| 23 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) 16 way Double door |
| 24 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 25 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole |
| 26 | Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required. I) For 6 way, Double door TPN MCBDB |
| 27 | Supplying and fixing Cable End Box (Loose wire box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required. For 14 way, Double door SPN MCBDB |
| 28 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 29 | Supplying and fixing call bell/buzzer suitable for single phase 230 volts, complete as required as per the direction of engg -in- charges. |
| 30 | Earthing with GI earth pipe 4.5 metre long x 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required |
| 31 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 32 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling etc as required. |
| 33 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required |
| 34 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 35 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 36 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 37 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) |
| 38 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) |
| 39 | Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc. as required |
| 40 | Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. |
| 41 | PROVIDING AND FIXING CIRCULAR/ HEXAGONAL G.I. BOX FOR CEILING FAN CLAMP, OF INTERNAL DIA 140 MM, 73 MM HEIGHT, TOP LID OF 1.5 MM THICK G.I. SHEET WITH ITS TOP SURFACE HACKED FOR PROPER BONDING, TOP LID SHALL BE SCREWED INTO THE G.I. BOX BY MEANS OF 3.3 MM DIA ROUND HEADED SCREWS, ONE LOCK AT THE CORNERS. CLAMP SHALL BE MADE OF 12 MM DIA M.S. BAR BENT TO SHAPE AS PER STANDARD DRAWING. (DSR Civil-2014 item no. 10.18) |
| 42 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.(a) 3.5X 25 sq. mm (28mm) |
| 43 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. Direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc complete as required. (REX Polyextrusion / Jain Irrigation / Duraline / Avadh Polytube/ Gemini make) 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 44 | Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of 3.5 X 25 sqmm in the existing HDPE/RCC/ HUME/ METAL pipe as required. (ISI marked Make Havells /Polycab/ Finolex /CCI /KEI /RR Kabel) |
| 45 | Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of 3.5 X 25 sqmm in the existing masonry open duct , for loose connection etc as required. (ISI marked Make Havells /Polycab/ Finolex /CCI /KEI /RR Kabel) |
| 46 | SITC of 240V, 50 HZ 1200 mm Sweep Ceiling Fan, having 02 Nos Canopy including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required of (make : Orient, model : Rapid Air /Bajaj/ usha/ Crompton/ Havells) including connection etc as required. |
| 47 | SITC of 240V, 50 HZ 900 mm Sweep Ceiling Fan, having 02 Nos Canopy including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required of (Make : Havells, Model : Cool Breeze /Bajaj/Usha/Crompton) |
| 48 | S/I/T/C of 20 Watt, 6500 K LED batten Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with LED inbuilt driver (make : Havells, model :pride essential/CG/Bajaj/Philips) including connection etc as required. |
| 49 | S/I/T/C of 10 Watt, Mirror light ,6500 K LED batten ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with LED inbuilt driver (make : Havells, model : Elite LED Pride plus/CG/Bajaj/Philips) including connection etc as required. |
| 50 | Supplying and fixing of 10 Watt, 3 star rating (B-22 base) LED bulb (make : Havells/CG/Bajaj/Philips) . |
| 51 | SITC of 300 mm Medium Duty Exhaust fan. complete with louvers and shutter etc, including connection, testing, commissioning etc. as required. (Make : Orient, model spring air medium duty exhaust fan/Havells/USHA/ Crompton/Bajaj) |
| 52 | SITC of 6 Watt , 6500 K surface mounted round/Square shaped LED downlighter with durable Aluminium housing to give glare free light with driver of Havells Model TRIM COSMO SURFACE ROUND 6 Watt, 6000 K or compatable make of Bajaj/Philips/CG i.c connection etc as required. |
| 53 | Supplying and fixing of 30 watt led flood light having input 240V ,50 Hz core mounting on wall & Energy saving, environmental friendly, long life etc as required . (Make Havells, model : No-CENTURA NEO/Crompton/Philips/HPL) etc as per direction of engineer-in-charge |
| 54 | Supplying and fixing G.I. pipe of 40 mm dia meduim duty on surface /recess for protection of UG cable etc. as required of ISI marked of make Jindal/ Hindustan / Prakash. |
| 55 | SITC of 100 Amp/415 Volt busbar chamber in the existing wall, including connection etc as required as per direction of engg in Charge (Make- Benlo code BEBB100, or equivalent in Havells/HPL/L&T/C&S) |
| 56 | Supplying and fixing 63 Amp, TPN MCB suitable for 240/415, 50 HZ, 10 KA breaking capacity in the existing MCB DB complete with connections, testing and commissioning etc. as required,( make Havells code- DHMGCTNF050 or euiavelnt in L&T/Siemens/legrand/Schenider ) |
| 57 | Supplying, Installation, testing and commissioning of following 2kw off grid solar system having high efficiency Poly crystalline solar panel and 150 AH Lead acid solar battery (3 year replacement warranty ) & 3.5 KVA solar inverter. The whole solar panel system will mounted on suitable GI frame structure mounted on roof including connection complete installation on site etc as required as per direction of engg-in-charge. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning . DETAILED SPECIFICATIONS 1. PHOTOVOLTAIC MODULE ( 06 Nos ) (i) Module Rating : Wp-335x6 (25 years warranty) (ii)Module Type : Poly Crystalline (iii) Makes : WAAREE. /Tata BP Solar/ Luminious / BHEL / CEL / Moserbear 2. BATTERY - 04 Nos (i) 150 Ah , 12 volt Battery Type : Solar Battery ( 3 Years replcement warranty Battery) (ii) Make : luminious/ exide or simillar specification 3.OFF GRID SOLAR INVERTER ACCESSORIES (i) Nominal Capacity : 3.5 KVA (3 years warranty) (ii) Make of invertor : Eapro/luminus/exide simillar specification (iii)DCDB with SPD and DCMCB :1 Nos (iv) DC Cable 6sqmm : 30 Mtr (v)AC Cable 2.5 sqmm : 20 mtr (vi) MC4 connector : 12 Nos (vii) Fasteners , Cable Tie etc 4. STRUCTRUE (i) GI Structure including fastening with anchor bolt on terrace as per site requirement |
| 58 | SITC of 15 Ltr energy effecient 5 star rated electrical Storage water Geyser with stainless steel tank suitable for 230 V, 50 HZ AC single phase supply with 05 years tank warranty and 02 year comprehensive warranty with adjustable thermostat/temp adjustable knob and making connection with heavy duty connection pipe etc. as required . (Make Crompton Product code ASWH 3015 or equivalent in Bajaj/Jaquar /Havells) |
| 59 | Providing and installation of single phase heavy industrial ductable air cooler (top/ down discharge as per site requirement) having of size 1100 x 1100 x 950 mm and air outlet size is 670 mmx670 mm along with duct and grill . The air cooler will have the following specifications :- Air flow 18000 CMH with cooling area capacity at about 1500 sqft(with duct) , motor 380 V/50 Hz. power 1.1 Kw fan type axial , water tank capacity 35 Ltrs , overload protection , dust filter, Body should be fabricated with engineering plastic single moduled , light weight, UV resistant, rust proof, crack proof and weather proof including complete in all respect as required as per the direction of Engg-in-charge. Make Sky air coolers/ Symphony / Khaitan or its equivalent |
| 60 | Supplying and making of ducting through 22 Gauge GI sheet with duct face of size 18\\"x12\\", ducting will be insulated through high quality insulating material et as required as per the direction of engg-in-charge. |
| 61 | Cutting of RCC wall/ Manually/ by meachanical means including stacking of steel bars and disposal of unservicable material and repairing of damaged wall after dismentaling/cutting including plastering and painting etc as required as per the direction of Engg-in-charge. |
| 62 | Providing and fixing of angle iron stand of size 50mmx50mmx5mm made of MS angle for duct cooler having size 1100 x 1100 mm with 04 nos of legs of height 600 mm including primer and painting of MS angle as per site requirement and installation of duct cooler, as per the direction of engg-in-charge. Make Jindal/TATA or its equivalent ISI marked |
| 63 | Providing, Installation, testing & connection of 1 HP, 230 V, 50Hz self priming monoblock pump set having delivery and suction pipe dia (25mmx25mm) , head range(06-34) mtr discharge range (2700L/h-450L/h) in the existing 25 mm dia GI/CPVC pipe including connection etc as required as per the direction of engg-in-charge. |
| 64 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia pipes. |
| 65 | Providing and placing on terrace on a platform of 1 feet (at all floor levels) polyethylene water storage tank, including floatvalve IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 66 | Add GST difference Multification factor (0.0633) on DSR Items (Srl no-01 to 43 and 64 to 65). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender