Tender For Special Repairs To Seepage/ Leakage Roof & Wall Of The Kitchen & Bathroom At Civilian Married Accomodation Block Nos Pb-15, Pa-16 At Dssc Wellington
Tender Value
35.60 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
14 days left
EMD
70200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Seepage/ Leakage Roof & Wall Of The Kitchen & Bathroom At Civilian Married Accomodation Block Nos Pb-15, Pa-16 At Dssc Wellington
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete. |
| 2 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.. (Notes : Screed bed measured and paid separately) |
| 3 | M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.. (Notes : Plaster shall be measured and paid separately) |
| 4 | M&L for Virified coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match on flooring, skirting all as specified and as directed. |
| 5 | M&L Rendering 10mm thick in cement mortar 1:4 on fair faces of brick/stone or concrete surfaces for backing of dado/skirting all as specified and as directed. |
| 6 | M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 all as specified and as directed. . |
| 7 | Demolition of unreinforced cement concrete in ground floors and paving n exc 15cm thickness (Below or above ground level) complete all as specified and as directed. |
| 8 | M & L 10mm thick cement plaster/screed in cement mortar 1:3 mixed with liquid water proofing compound for roof slab/ floor complete all as specified (Note:- Liquid water proofing compound shall be measured seperately) |
| 9 | Material and Labour for cleaning the surface of sunken floor portion of WC, Bathroom etc., with wire brush, washing with hydrochloric acid to remove dust, dirt, oil, grease, loose particles etc., and providing water proofing treatment to sunken floor by applying first layer of slurry of cement @0.488 kg/Sqm mixed with Acrylic based polymer modified cementitious (PMC) composite compound @ 0.253kg/Sqm and second layer of slurry of cement 0.242 kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @0.126kg /Sqm etc., complete all as specified and directed. |
| 10 | M&L plain cement concrete type B1 1:2:4 (20mm graded agg) 40 mm thick as in sub base to floorcomplete all as specified and directed. |
| 11 | M & L for plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and as directed. |
| 12 | Demolition of existing water proofing treatment of any description and removal of debris to out side MD land complete all as specified and as directed. |
| 13 | Material and labour for plain Cement Concrete 1:2:4 type B1 using 20 mm graded stone aggregare with WPC completed 40 mm average thickness as in padding concrete for roof treatment, floor/chejjas etc. finished even and fair all as specified and as directed (WPC shall be measured and paid separately) |
| 14 | M & L 10mm thick cement screed in cement mortar 1:3 mixed with liquid water proofing compound FOSROC's complast 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry for roofcslab/ floor complete all as specified (liquid water proofing compound are measure seperately) |
| 15 | M&L water proofing treatment by applying primer @ 0.20kg per sqm, providing and laying 3mm thick APP modified water proofing memebarane weighing not less than 3.6 kg per sqm reinforced with non woven polyester matt weighing not less than 100 gm per sqm having softeninbg point not less than 140º centigrade, longitudinal tensile strength not less than 300 N per sqm tearning strenght of 100n by torch on application including minimum over lapping 10cm on either side and 15cm on ends and applying a coat of bitumen primer @ of 0.20 Kg/Sqm and finishing with bituminious aluminium paint applied @ 0.10 Kg / Sqm and finished all as per manufacture's instruction and as directed. Note: The work shall be carried out by authorised applicators of manufacturer. |
| 16 | M&L for cement concrete type C-2, 1:3:6 (40mm graded aggregate) plinth protection /pavings finished even and smooth without using extra cement , 75mm thick complete all as specified and as directed. |
| 17 | Dismantling of wrought iron or mild steel work of any description or in any position not other wise specifically provided for complete all as specified and directed |
| 18 | M & L for roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy brackets framing (beam, tee, angle, channel or flat sections)) Fe 410-W (Gde- E- 250) quality- A including distance pieces etc complete all as specified. |
| 19 | M&L for Welded steel wire fabric supplied and fixed complete to wood or steel members Weight per square metre N exc 4kg complete. |
| 20 | Material & Labour two coats of synthetic enamel paint over a coat of red oxide primer to steel surface including preparation of new surface exc 10 cm width or girth all as specified and as directed. |
| 21 | Material and labour for plain cement concrete 1:3:6 type C2, using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and as directed. |
| 22 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 23 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 24 | Refixing of old GI steel tubes and connections of 15 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed. |
| 25 | Refixing of old GI steel tubes and connections of 20 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed. |
| 26 | S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor of 15mm bore all as specified and as directed. |
| 27 | S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor of 20mm bore all as specified and as directed. |
| 28 | Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc.& making good, cutting not exc 10 cm grith in brick wall complete all as specified and as directed. |
| 29 | Dismantling water tanks Capacity of tank exc 500 & n. exc 1000 ltrs store complete all as specified and as directed. |
| 30 | Supply and fixing rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical,vertical with closed top) hoisted and fixed in position all as specified and as directed. |
| 31 | S&F 20mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed. |
| 32 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), colour white, closed pattern with flat bottom and seat cover and mild steel chromium plated or aluminised hinging device and P/S trap including connections to drain (or outgoing pipe) and including taking down complete all as specified and as directed. |
| 33 | S&F in repairs, vitreous china water closet squatting pan orissa pattern, 580 x 440 mm size with integral foot rests, colour white and P-trap including connections to drain (or outgoing pipe), lime concrete bedding complete all as specified and as directed. |
| 34 | S&F in repair PVC valveless, syphonic action type, 10 Ltr capacity, flushing cistern low/high level, white with inlet, ball valve, float and handle including brackets and connections and including taking down complete all as specified and as directed. |
| 35 | S&F wash basins, vitreous china of size 550 x 400 including cutting for and pinning in ends of brackets or erecting stand, inclusive of fixing of supply and waste pipe 32 mm bore, Brass chromium plated bottle trap, 15 mm bore pillar tap chromium plated fancy type, 450 mm long PVC connections with PTMT unions, etc complete all as specified and as directed. |
| 36 | S&F in repairs seat cover for pedestal pan white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. |
| 37 | S&F in repairs bib taps cast copper alloy fancy type screwed for iron pipes 15mm bor dia chromiuim plated complete all as specified and as directed. |
| 38 | S&F in repairs Pillar taps(long thread) cast copper alloy fancy type 15mm thick long thourght complete all as specified and as directed. |
| 39 | S & F in repairs Over Head Shower with shower arm complete all as specified and as directed. |
| 40 | Supply and fix in repairs health faucet (hand shower) chromium plated with 1.0metre long easy flex tube 8mm dia with wall hook complete all as specified and as directed. |
| 41 | S&F in repair 15 mm dia bore angle cock chromium plated cast copper alloy fancy decorative type with flange plate including taking down complete all as specified and as directed |
| 42 | S&F in repairs Wall mixer 3 in 1 system with provision for both hand shower complete with 115 mm long bend pipe, connection legs & wall glange (without hand & overhead shower) all as specified and as directed. |
| 43 | S & F in repair Stainless steel kitchen plate rack of size (24x36x10) Make :- Prayag Cat No- P-336 or equivalent all as specified and directed. |
| 44 | S & F in repairs corner self with glass of size 300 x 300mm, 8mm thick bevelled on edges with two brackets CP complete all as specified and as directed. |
| 45 | S & F in repair Full glass shelf 450 mm (18\\") all as specified and directed. |
| 46 | S&F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and as directed. |
| 47 | S & F in repair 450 mm x 600 mm looking mirror 5.5 mm thick glass, beveled edge finishing includings studs and necessary fittings all as specified and as directed. |
| 48 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 49 | S&F In repairs for removal of old PVC/cast iron loor trap incl wall crossing pipe and fixed with new outlet 75mm pvc (swr) floor trap/ multi trap with stainless steel grating and new wall crossing and filling with pcc 1:2:4 with water proofing compound including matchng with existed tile and joining with outer pipe line with solvent all as specified and directed. |
| 50 | S&F In repairs PTMT Grating 100 mm dia outlet complete all as specified and as directed. |
| 51 | S&F In repairs PTMT Grating 125 mm dia with waste hole outlet complete all as specified and as directed. |
| 52 | Demolition of brick work / pre cast concrete article / stone masonry built in cement mortar all as specified and as directed. |
| 53 | M&L for Precast cement concrete solid building blocks or slabs Type C1(1:3:6) using 20 mm graded aggregate, exc 10 cm thick set in CM 1:6 all as specified and as directed. |
| 54 | Material and labour for 15 mm thick rendering in cement mortar 1 : 4 on brick / concrete surfaces, finished fair and even without using extra cement all as specified and as directed. |
| 55 | M&L for granite of any type tile 20 mm thick machine cut bedded and jointed with grey cement slurry & pointed with white cement to match the shades of granite stone including grading and polishing type with and including 10 mm thick backing coat in cement mortar 1;3 complete all as specified and as directed. |
| 56 | M&L for TMT bars,10mm dia and over cut to length,bent to shape required,including cranking, bending spirally for hooping for columns,hookingends and binding with mild steel wire (anealed) not less than 0.9mm dia or securing with clips all as specified. |
| 57 | M&L for Fair finished flat surfaces of concrete formwork to soffits of suspended slab such as roof,floorslabs,landing and similar work not exceeding 200mm thick complete all as specified and as directed. |
| 58 | M&L for Reinforced Cement Concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in Beams and columns in floors roofs,landing,balconies,canopies,deck slab and in shelves and like complete as specified and as directed. |
| 59 | Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for complete all as directed. |
| 60 | M&L for 10 mm thick rendering in cement mortar 1:6 on PCC block masonry or fair faces of brick workblock.stone surfaces of wall, finished even and smooth with out using extra cement complete all as specified and as directed. |
| 61 | M&L for 20 mm thick rendering in cement mortar 1:4 on stone masonry surfaces of wall, finished even and smooth with out using extra cement and mixed with Water Proofing compound including scaffolding complete all as specified and as directed. Note: WPC shall be measured and paid seperatly. |
| 62 | M&L for 15 mm thick rendering in cement mortar 1:4 on brick work surfaces of wall, finished even and smooth with out using extra cement and mixed with Water Proofing compound including scaffolding complete all as specified and as directed. Note: WPC shall be measured and paid seperatly. |
| 63 | Supply only integral water proofing compound complete all as specified and as directed. |
| 64 | M&L for rendering to soffit of RCC slab& ceiling , etc. 5 mm thick in cement mortar 1:3 finished even & fair without using extra cement complete all as specified and as directed. |
| 65 | Taking down cement or cement lime plaster of any description on brick or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 66 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as per manufacturer instruction as directed. |
| 67 | M&LPreparation of new surfaces of plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed. |
| 68 | M&L Preparation of new surfaces of plastered surfaces of wall and applying two coats of white wash on celling complete all as specified and as directed. |
| 69 | M&L for preparation of new surfaces of walls and applying with 3mm thick white putty and making the surface to an even & smooth finish,rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of Alkali resident primer to be applied by approved applicator of the manufacturer of the paint and all as specified and as approved. |
| 70 | M & L for applying one coat of acrylic distempter on old treated surfaces of any walls including preparation of surface by washing, rubbing down and stooping of distempered surfaces all as specified and as directed. |
| 71 | M&L for preparation of old surfaces of external walls and applying one coat of Wheather coating external emulsion by the approved applicator of the manufacturer of the paint complete all as specified and as directed. |
| 72 | Dismantling of boarding, any descreption, fixed in any position with nails all as specified and directed |
| 73 | S&F 18/19mm thick Particle board, exterior grade prelaminated both sides with decorative choice lamination, fixed with nails/ screw screws to timber frame work including liping work teak wood beading 6mm thick comple all as specified and directed |
| 74 | S&F Continuous (Piano) hinges SS, bright finish width of flaps 40mm complete all as specified and as directed. |
| 75 | Supply and fix in repairs Magnetic closer of suitable size for kitchen/bedroom cupboards fixed with screws complete all as specified and directed. |
| 76 | S&F brass knobs 35-40mm dia in repairs complete all as specified and directed |
| 77 | S & F in repairs 18mm thick High Density High Moisture Resistant (HDHMR)/HDMR/HDWR Board, both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc., complete all as specified and as directed.Note: All exposed edges/surfaces to be finished with same laminated sheet to match with the other surfaces and nothing will be paid extra. |
| 78 | Supply and fix Stainless steel soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for 18mm thick shutters complete all as specified and as directed. |
| 79 | Supply and fix stainless steel telescopic ball bearing channel, zinc plated finish for drawer including necessary fittings up to length of 600mm fixed with screws complete all as specified and directed. |
| 80 | Taking down Chowkats or frames not exceeding 1.5 Sq.M each (Without taking off shutters from the frames). complete all as specified and directed |
| 81 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension,EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & complete as all specified and directed.. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 82 | S&F Second Class hard wood plain, solid, straight as in chowkat and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed |
| 83 | S&F Second class Hard wood glazed and skeleton door, shutters, open rebated and prepared to received glass, gauge etc (without sash bar) edges of framing plain, charnfered or rounded and mitred, beads 8.23 (a) thickness 35mm and fitted to Chokets etc. complete all as specified and as directed. |
| 84 | S&F Solid PVC Door Frame of size 50mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be painted to match with prelam sheet complete as specified and as directed. |
| 85 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm PVC Sheet on back face with wood free EPS complete as specified and as directed. Make : Sintex or equivalent in Rajashri plastwood/Poly windows/Dura plast extruction as approved by GE. |
| 86 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading in repairs complete all as specified and as directed. |
| 87 | S &F MS Butt hinges medium weight cold rolled & fixed 100mm long complete all as specified and as directed. |
| 88 | S & F Aluminium anodized barrel tower bolts of extruded section 100mm complete all as specified and as directed. |
| 89 | S & F Aluminium anodized handles cast type 150mm long complete all as specified and as directed. |
| 90 | S & F Aluminium anodized handles cast type 100mm long complete all as specified and as directed. |
| 91 | S & F Aluminium alloy anodized sliding door bolt with hasp and staple of size 300mm long complete all as specified and as directed. |
| 92 | S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading in repairs complete all as specified and as directed. |
| 93 | S&F in repair 4mm thick sheet glass, ordinary quaility and glazing with oil putty in square but not exceeding 0.5 Sqm in each pane all as specified and as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender