Tender For Comprehensive Maintenance Of B/R Works For Bldgs In Dpti Complex, Triveni Vihar And Left Over Area Of Dad At New Cantt Prayagraj
Tender Value
49.99 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
1 days left
EMD
99980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Of B/R Works For Bldgs In Dpti Complex, Triveni Vihar And Left Over Area Of Dad At New Cantt Prayagraj
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tilling including cement mortar bedding and rubbish off the premises complete all as specified and directed. |
| 2 | S&F joint free non skid ceramic tiles, coloured, 7 to 8mm thick (square/rectangular) polished, area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 3 | S&F glazed ceramic tiles, coloured 300 x 450 x 6 to 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surface including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 4 | S&F vitrified tiles, light shade 8 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 5 | S&F vitrified tiles, 8 to 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 Sqm not exceeding 1.00 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 6 | S&F vitrified tiles, light shade, 8 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in vertical surfaces such as Dado/Skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in CM 1:3 complete all as specified and directed. |
| 7 | S&F heavy duty exterior finish pavement tiles, coloured, superior quality, 300 x 300 x 10mm thick as in floors/pavement etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 8 | M&L vitrified double charged ceramic coloured tiles of 8 to 10mm thick area of each tile not exc 0.36 Sqm in floor etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed. |
| 9 | M&L for vitrified double charged ceramic coloured tiles 8 to 10 mm thick polished (square/rectangular) area of each tile not exc 0.36 Sqm, in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick back coat in CM 1:4 complete all as specified and directed. |
| 10 | Cleaning and removing all scale and dirt, etc from water tanks of capacity exc 250 ltrs but not exc 500 ltrs from mouth of circulating pipes etc, including disconnecting, reconnecting & refixing water tanks in position and writing date of cleaning with synthetic enamel paint with 75mm text height in DD-MM-YY format, complete all as specified and directed. |
| 11 | Cleaning and removing all scale and dirt, etc from water tanks of capacity exc 500 ltrs but not exc 1000 ltrs and above from mouth of circulating pipes etc, including disconnecting, reconnecting & refixing water tanks in position and writing date of cleaning with synthetic enamel paint with 75mm text height in DD-MM-YY format, complete all as specified and directed. |
| 12 | S&F 15mm bore steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor including taking up or down old steel tubing and connections and removing to store or removing from site complete all as specified and directed. |
| 13 | S&F 20mm bore steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor including taking up or down old steel tubing and connections and removing to store or removing from site complete all as specified and directed. |
| 14 | Supplying and laying of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches or laid on walls or floors wherever specified complete including taking down all as specified and directed. |
| 15 | Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 15mm dia including taking up or down old steel tubing and connections and cleaning for refixing complete all as specified and directed. |
| 16 | Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 20mm dia including taking up or down old steel tubing and connections and cleaning for refixing complete all as specified and directed. |
| 17 | Cutting chases in brick work, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing or concealed conduit wiring etc, and making good (cutting not exc 10 cm girth) complete all as specified and directed |
| 18 | S&F in repair rotational moulded, multilayer HDPE water storage tank (white colour three layer) of 1000 ltrs capacity (cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20mm dia PTMT float valve epoxy coated aluminium rod with high density plastic float ball (of minium weight 210 grams) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed. |
| 19 | S&F in repair rotational moulded, multilayer HDPE water storage tank (white colour three layer) of 500 ltrs capacity (cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20mm dia PTMT float valve epoxy coated aluminium rod with high density plastic float ball (of minium weight 210 grams) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed. |
| 20 | S&F in repair PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 20mm bore pipe (minimum weight 210 grams) complete all as specified and directed. |
| 21 | Supply only PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 20mm bore pipe (minimum weight 210 grams) complete all as specified and directed. |
| 22 | S&F in repairs PVC tank cover/lid for 500/1000 ltrs over head tank complete including fixing the lid with the existing tank with PVC hinges and male and female locking system all as specified and directed |
| 23 | S&F in repair 5mm thick bevelled edge looking mirror of selected quality glass, mounted on wall with and including 04 Nos stainless steel studs of adequate size complete all as spfd and directed. |
| 24 | S&F in repair PVC low level syphonic action flushing cistern of 10 ltrs capacity including siphon, PVC float with ball valve, rubber cone and flush pipe, brackets, 450 long PVC connection pipe etc complete all as specified and directed. |
| 25 | S&F in repairs complete PVC assembly/kit for PVC flushing cistern of any shape or make or capacity complete all as specified and directed. |
| 26 | S&F in repair SS Grating doom 125mm dia with waste hole of steel fixed on floor/nahani trap with cement mortar, complete all as specified. |
| 27 | S&F in repair bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. |
| 28 | S&F in repair 15mm dia bib tap standard of PTMT any colour, high pressure screwed for iron pipe with minimum weight 90 grams, complete all as specified and directed. |
| 29 | S&F in repair pillar taps 15mm bore, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 30 | S&F in repair stop valves, cast copper alloy, screwed down, high pressure, with capstan head, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore, complete all as specified and directed. |
| 31 | S&F in repair fancy type Chromium plated brass stop cock/angle valve for 15mm bore pipe, fixed in repairs complete all as specified and directed. |
| 32 | S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed |
| 33 | Supply only 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed |
| 34 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed |
| 35 | Supply only 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed |
| 36 | S&F in repairs Tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges, complete all as specified and directed. |
| 37 | S&F in repairs suitable for 15mm dia health faucet ABS body with 8 mm dia, 1 mtr long flexible tube & wall hook complete all as specified and directed. |
| 38 | S&F in repairs stainless steel soap dish (oval) type including ss screws and wooden/plastic cleats complete all as specified and as directed. |
| 39 | S&F in repair acrylic shelf assembly 12 cm wide with guard 60 cm long complete all as specified and directed. |
| 40 | S&F in repair PVC connection 15mm dia and 45 cm long with 2 Nos PTMT nuts, complete all as specified. |
| 41 | Supply only 32/40mm bore PTMT waste pipe of best quality, 600mm long for wash basin and sink etc complete all as specified and directed. |
| 42 | S&F in repair brass chromium plated waste coupling for SS Sink with rubber washer plug etc complete |
| 43 | S&F in repair brass chromium plated waste coupling for wash hand basin with rubber washer plug etc complete |
| 44 | S&F in repair two way angle valve/tap with wall flange 15mm bore, fancy type, quarter turn, brass chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed. |
| 45 | S&F in repair Brass Chromium plated shower rose 125 mm dia to 150mm dia with 190mm long arm, swivel joints, complete all as specified and directed. |
| 46 | S&F in repair acrylic type corner shelves of 300mm size including SS screws and wooden/plastic cleats complete all as specified and as directed. |
| 47 | S&F SS peg set of four, fixed with PVC rowl plug and screws complete all as specified and directed. |
| 48 | Demolition and breaking up (salt glazed ware, AC, PVC) drain pipes of any dia set in cement mortar complete. |
| 49 | S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls with and including suitable size PVC clamps complete all as specified and directed. |
| 50 | S&F 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls with and including suitable size PVC clamps complete all as specified and directed. |
| 51 | S&F in repair PVC (SWR) bend with oval access door any radius suitable for 110mm bore PVC pipe jointed with solvent complete all as specified and directed. |
| 52 | S&F in repair PVC (SWR) bend any with oval access door radius suitable for 75mm bore PVC pipe jointed with solvent complete all as specified and directed. |
| 53 | S&F in repair PVC (SWR) branch piece, single (single Y or T) equal or unequal suitable for 110mm bore PVC pipe jointed with solvent complete all as specified and directed. |
| 54 | S&F in repair PVC (SWR) branch piece, single (single Y or T) equal or unequal suitable for 75mm bore PVC pipe jointed with solvent complete all as specified and directed. |
| 55 | S&F in repair PVC (SWR) branch piece, 4 way (Y or T) equal or unequal suitable for 110mm bore PVC pipe jointed with solvent complete all as specified and directed. |
| 56 | S&F in repair vitreous china wash basin, white, flat back type of size 550 x 400mm including brackets including cutting for and pinning in ends of brackets in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed. |
| 57 | S&F in repair vitreous china counter top wash basin, white, oval shape of size 560 x 450mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed. |
| 58 | M&L for Z black Granite 20mm thick (of any type) work (table rubbed and polilshed) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in cement mortar 1:6 complete all as specified. |
| 59 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified. |
| 60 | S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed. |
| 61 | S&F in repairs plastic seat cover white of pattern WC including fixing divice and chromium plated nuts, complete all as specified and directed. |
| 62 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) squatting pan including connection to trap and to flushing pipe, anti-syphonage pipe etc, complete including making good to floor complete all as specified and directed. |
| 63 | S&F in repair Stainless steel plate rack (utensil rack) of size 600mm x 750mm and depth 300mm made with 1.00 mm thick stainless steel sheet (AISI 304) provided with brass screw including necessary fittings, nut/bolts complete all as specified. |
| 64 | S&F in repair stainless steel sink, made out of 1.00 mm thick stainless steel sheet conforming to AISI 304 with plug, washers, waste pipe, cast iron cantilever brackets, connecting union with bowl internal size 550mm x 400mm x 250mm complete all as specified and directed. |
| 65 | Taking down shutters of any description exc. 1.0 sqm but not exc. 2.0 Sqm each leaf complete all as specified and directed. |
| 66 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exc 1.50 Sqm each complete all as specified and directed. |
| 67 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but not exc 4 Sqm each complete all as specified and directed. |
| 68 | Refixing shutters in the same opening of any description exc 1.0 Sqm but not exc 2.0 Sqm each leaf including easing and adjusting including refixing the builders hardware complete all as specified and directed. |
| 69 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other Frames/ Chowkhat of size 50mm x 100mm single rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 70 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other Frames/ Chowkhat of size 65mm x 125mm double rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 71 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge.Note : Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 72 | S&F 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg/Cum manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos MS powder coated butt hinges size 100mm x 25mm x 2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19 x 6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings. |
| 73 | S&F Solid PVC moulded door frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet reinforced with MS tube complete all as specified and directed. |
| 74 | S&F factory made Solid PVC moulded door shutters 28 to 30mm thick (stiles) with 2, raised panel design with 2mm thick moulded Prelam on front face and 2mm thick prelam PVC sheet on back side completed all aspecifed and directed. |
| 75 | M&L for Forming jambs etc, to openings in CM 1:6 (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete Please Enable Macros to View BoQ information |
| 76 | M&L for Forming jambs etc, to openings in CM 1:6 (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 daySep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender