Tender For Addition/ Alteration To P-6 Building Of W5 Main Workshop In Timber Pond Inside Chennai Port-Bmu Under Ge (I) Cg Chennai
Tender Value
42 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
18 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/ Alteration To P-6 Building Of W5 Main Workshop In Timber Pond Inside Chennai Port-Bmu Under Ge (I) Cg Chennai
BOQ
| Sl. No. | Item Description |
| 1 | B/R Work |
| 2 | Materials and labours for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600mmx600mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 8mm thick high Pressure Non Asbestos Fiber Cement decorative Board 12 mm thick (E-Board Classic) in a grid of aluminium duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof eith adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinkler, smoke detectors etc., The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. The last hanger at the end of each main runner should not be interlocked between main runners @ 610mm c/c, as to form 600 mm x 600 mm grid complete all as specified and directed.Make : Gytech (Saint Gobin - Design No 154 Industries Ltd or equivalent as per IS 14862. |
| 3 | Supply and fix Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010) complete all as specified and as direceted. |
| 4 | Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and as directed.Make: Rajshri or equivalent as approved. |
| 5 | Supply and fix aluminium powder coated any colour as approved for ventilator shutter , half fixed and half louvered type without sash bar , with 0.55 kg/RM , necessary joining cleats , glazing clips , rubber packing, aluminium snap beading ,screws , akuminium fittings such as leg stags 150 mm long(1 Nos) hinges 100 mm long (2 nos), suitable handle etc., complete all as specified and as directed. |
| 6 | Supply and fix of powder coated aluminium window and ventilator shutters, fixed type without sash bar, for powder coating of any colour (Thickness or powder coating not less than 50 micron)aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws etc., complete all as specified and as directed. |
| 7 | Supply and fix for aluminium grill (powder coat transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved aluminium standard section around the opening, all complete as per requirement complete all as specified and as directed. Note : Thickness of powder coating not less than 50 micron. |
| 8 | Supply and fix 4.8 mm thick sheet glass selected quality approved fixed in position in aluminium/iron/wooden frame work including rubber beading and pointing cleats/glazing with oil putty complete all as specified. |
| 9 | Supply and fix of door closer hydraulically regulated aluminium die cast body universal type, suitable for door designation no 1 shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete specified and as directed. |
| 10 | Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises to out side MD land etc., complete all as specified and as directed. |
| 11 | Material and labour for glazed coloured ceramic tiles of grade B-III, 7mm thick of size 450mm x 350mm or 350mm x 250mm or of size matching to floor tile as approved by GE, fixed in vertical surfaces such as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thick complete all as specified and as directed. |
| 12 | Material and labour for coloured Non Skid ceramic tiles, matt finish of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group, area of each tile exceeding 0.18Sqm but not exceeding 0.38 Sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 13 | Materials and labours for Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm grade B-II, in floor etc to receive in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as diretced. |
| 14 | Materials and labours for screed bed or bedding layers of 15 mm thick cement mortar (1:6) for laying floor finishes all as specified. all as specified set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. |
| 15 | Materials and labours for Vitrified Ceramic tiles 10 mm thick dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etcincuding rendering 10 mm thick cement mortar (1:4) to receive tiles in vertical surfaces , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 16 | Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 17 | Materials and labours for 75mm thick cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed. |
| 18 | Supply only 38mmx1,5 mm plastic dividing strips as in floors complete all as specified and as directed. |
| 19 | Materials and labours Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in floor topping, 40mm thick, surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 20 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and as directed. |
| 21 | Materials and labours for fly ash Brick work modular size with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 22 | Materials and labours for fly ash brick work modular size with sub class ‘B’ brick straight or curved on plan to any radius in half brick wall in cement mortar 1:4 complete all as specified and as directed. |
| 23 | Materials and labours for rendering 15mm thick in cm 1:4 cement plaster on fair faces of brick or concrete surfaces finished even and smooth without using extra cement, complete all as specified and as directed. |
| 24 | Supply only integral water proofing compound complete all as specified and as directed. |
| 25 | Material and labour for rendering in Cement Mortar 15mm thick in two coats, i.e, in Cement Mortar 1:4, 5mm thick mixed with water proofing compound as per manufacturers' instructions over in Cement Mortar 1:6, 10mm thick on fair faces of brick/concrete surfaces, finished even and fair externally all as specified and as directed.Note: WPC will be measured and paid separately. |
| 26 | Cutting chases, pinning in, making good to brick facing where required and pointed in cement mortar 1:3 and making good cutting exceeding 10 cm exc 20 cm girth complete all as specified and as directed. |
| 27 | Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 28 | Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 29 | Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenchescomplete all as specified and as directed. |
| 30 | Supplying and laying of 32mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed. |
| 31 | Refixing of 15mm dia old steel tubing and connections in new or old position Walls, ceiling, floors, etc., complete all as specified and as directed. |
| 32 | Refixing of 20mm dia old steel tubing and connections in new or old position Walls, ceiling, floors, etc., complete all as specified and as directed. |
| 33 | Supply and fix PPR ball valve 20mm dia high pressure of PTMT with aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed. |
| 34 | Supply and Fix Gun metal globe or gate valve of size 20mm bore confirming to IS 778-1984 with brass spindle and iron wheel head at the top screwed both ends for GI pipe including all fittings / fixtures like nipple, union etc., complete all as specified and as directed |
| 35 | Supply and Fixed as in repairs vitreous china wash basin, white, flat back, size 580x450 mm excluding taps, waste, chain and plug and porcelin stopper but including breckets etc., complete all as specified and as directed. |
| 36 | Supply and fix as in repairs Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, complete all as specified and as directed. |
| 37 | Supply and fix as in repairs Vitreous china white washdown watercloset pedastal pattern including necessary lime concrete and 100 mm bore cast iron ‘S’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, including necessary connections and jet pressure with nozzle complete all as specified and as directed. |
| 38 | Supply and fix in repair PVC low level flushing cistern 10 Ltrs capacity ISI Marked incl all assessories and 32 mm dia PVC flush/discharge pipe incl float valve, inletPVC conection 15mm bore complete all as specified and as directed. |
| 39 | Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 m complete all as specified and as directed. |
| 40 | Supply only of flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and as directed. |
| 41 | Supply and fix for 600mmx450mm looking mirror of selected quality glass mounted of 9mm thick of commercial plywood and PVC mouldings frame fancy type complete all as specified and as directed. |
| 42 | Supply and fix in repair Sheet glass shelf assembly consisting of 5.5mm tk sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 43 | Supply and fix Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs as in repair complete all as specified and as directed. |
| 44 | Supply and fix 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass as in repair complete all as specified and as directed. |
| 45 | Supply and fix 15mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) fixed in repairs complete all as specified and as directed. |
| 46 | Supply and fix Stop cock Cast copper alloy screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union of 20 mm bore fixed in repairs complete all as specified and as directed. |
| 47 | Supply and fix in repairs fancy type long neck bib taps, cast copper alloy, chromium plated screwed down for 15 mm bore iron pipe or for brass ferrule complete all as specified and as directed. |
| 48 | Supply and fix Shelf PTMT fixed to wall with steel screws and PVC rawl plug complete all as specified and as directed. Make -Prayag |
| 49 | Supply and fix in repairs kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410 mmx330mmx 160mm etc., complete all as specified and as directed. |
| 50 | Supply and fix for Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc,.complete all as specified and as directed. |
| 51 | Dismantling asbestos cement/PVC pipe 100 mm dia including clamps complete all as specified and as directed. |
| 52 | Supply and fix Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, heavy duty laid in trenches size 50mm bore of pipe as in repair complete all as specified and as directed. |
| 53 | Supply and fix 110mm dia PVC (SWR) pipes single socketed, in any length, laid in floors / fixed to walls complete all as specified. |
| 54 | Supply and fix 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches complete all as specified. |
| 55 | Supply and fix PVC (SWR) bends any radius, 110mm bore, fitted with oval access door complete all as specified. |
| 56 | Supply and fix bend suitable for 110mm dia PVC (SWR) pipe complete all as specified. |
| 57 | Supply and fix PVC (SWR) bends any radius, 75mm bore, fitted with oval access door complete all as specified. |
| 58 | Supply and fix PVC (SWR) reducers any radius 110mm bore complete all as specified. |
| 59 | Supply and fix 110mm bore PVC (SWR) junction, single (single T) equal or unequal with or without door access complete all as specified and as directed. |
| 60 | Supply and fix PVC (SWR) vent cowl 75mm dia complete all as specified and as directed. |
| 61 | Supply and Fix, 2000 litres capacity Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, three layered (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement, making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) including dismantling and lowering of old tank complete all as specified and as directed. |
| 62 | Supply and fix MS TMT of 10 mm dia , cut to length bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (anneled) not less than 0.9mm dia complete all as specified and as directed. |
| 63 | Materials and labours for TMT steel bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and as directed. |
| 64 | Materials and labours preparation of new undecorated plastered surface of walls and applying two coats of distemper oil emulsion over one coat of primer on wall complete all as specified and as directed. |
| 65 | M&L for complete removal of existing treatment on walls and applying two coats of distemper with oil emulsion over a coat of wall care putty of thickness 1.5mm and alkali resistant primer complete all as specified and as directed. |
| 66 | Material and Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.9 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 67 | Material and labour for complete removal of existing treatmentand applying two coats of exterior wheather coats (as per manufacturers instruction ) (apex Ultima) of M/s Asian make or equivalent of M/s Berger M/s Shalimar M/s Neroloc over a coat of wall putty complete all as specified and directed. |
| 68 | Materials and labours for 1.5 mm thick wall care putty on wall complete all as specified and directed |
| 69 | Materials and labours preparing of old decorated wood or wood base surface of any description over 10 cm width or grith applying one coat of Synthetic enamel paint complete all as specified and as directed. |
| 70 | Supply and fix Framed work as in steel gates of angles or other section with gusset plates , rails , braces etc . complete and gates Fe-410W(Gde-E-250 qaulity) to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging gate fitting complete all as specified and as directed. |
| 71 | Supply and fix Framed work such as grills, gratings, etc. with ends of bars or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 72 | Supply and fix in repair Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with beading to wooden frames with aluminium wire staples complete all as specified and as directed. |
| 73 | Materials and labours 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing as complete all as specified and as directed. |
| 74 | Materials and labours for 5mm thick Solid PVC wall lining consisting of Single side prelam PVC sheet of wooden grain printed PVC sheet color inclusive of Solvent Cement without relevant and fixing at site on PVC frame as complete all as specified and as directed. |
| 75 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of complete all as specified and as directed. |
| 76 | Materials and labours for 12 mm thick Prelaminated particle board, interior grade, prelaminated on both side with decorative choice lamination & other side balancing white lamination etc,. complete all as specified and as directed. |
| 77 | Pre-laminated particle board, 18/19mm thick interior grade, having one side decorative lamination (approved shade) and other side balancing white lamination fixed in pelmet boxes, shelves , rebated or flat edges including 6 mm thick teak wood leaping all-round and fixed as in repairs complete all as specified and as directed. |
| 78 | Material and labour for PCC(1:4:8) type D-2 using 40 mm graded stone aggregate as in foundations, fiiling and mass concrete etc., complete all as specified and as directed. |
| 79 | Demolition of cement concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed. |
| 80 | Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and as directed. |
| 81 | Supply and fix MS butt hinges cold rolled medium weight 75mm long complete all as specified and as directed. |
| 82 | Supply and fix Aluminium, anodised, barrel tower bolts of extruded section 150mm long complete all as specified and as directed. |
| 83 | Supply and fix Aluminium, anodised, barrel tower bolts of extruded section 200mm long complete all as specified and as directed. |
| 84 | Supply and fix Extruded aluminium alloy handles, fabricated type, anodised 75 mm in size complete all as specified and as directed. |
| 85 | Supply and fix of Mortice lock, vertical type, size 100mm of aluminum 4 lever complete all as specified and as directed. |
| 86 | Supply and fix for powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, aluminum snap beading screws etc., complete all as specified and as directed. |
| 87 | Supply and fix for industrial non skid tiles 10-12mm thick (square or rectangular) area of each tiles n.exc 0.18 Sqm as including 10mm thick rendering in cement mortar 1:4 set jointed in neat cement slurry and pointed in white or coloured cement to match over all complete all as specified and as directed. |
| 88 | Air Conditioning |
| 89 | Supply, install, test & commissioning of 2.0 TR Capacity Wall mounted Split Air conditioners, inverter smart energy display, Dual Filtration with HD & PM 2.5 filter BEE 5 star rated fitted with hermitically sealed compressor operating on 220±10%,50Hz single phase AC supply with evaporator and condensing unit made of copper tubes with aluminium fins, 4 way air swing, Heavy duty cooling at 52 degree celcius, Anti-dust filter, Smart diagnosis, cordless remote control, copper piping for both suction and discharge of three meters length with protection covering for piping of suitable size of medium PVC pipe, power and control cabling as per site requirement, complete all as specified and as directed.Note : Contractor shall submit 5 Years warranty for Indoor unit, PCB, 10 Years warranty for compressor issued by the manufacturer / OEM to the Engineer-in-Charge. |
| 90 | Supply and fixing Voltage stabilizer for automatic operation,Double booster elegent digital, single phase naturally air cooled indoor type & designed for input variation between 150 V to 270 V , 5 KVA complete all as specified and as directed.Note : Contractor shall be submit 3 years warranty for Voltage stabilizer issued by the manufacturer / OEM to the Engineer-in-Charge. |
| 91 | Supply and fixing of additional set of 20SWG copper refrigerant pipe of dia 15.88mm (5/8 inch) for suction line and 6.35mm (1/4 inch) dia for liquid lines suitable for 2 Ton Split AC with 19mm thick closed cell rubber nitrile, class \\"O\\" - arm flex insulation connecting from Indoor unit to Outdoor Unit in suitable size PVC Pipe for protection of piping, on the wall surface/ Cable tray etc using suitable clamps etc complete as per site requirement.Note: Copper tubes provided for new ACs beyond 3m length only shall be measured against this item. |
| 92 | Supply and fix Additional Drain Pipe (PVC) 25mm dia insulated with Wire mesh complete all as specified and as directed. |
| 93 | Supply, installation, testing, and commissioning of heavy-duty, factory-fabricated MS (Mild Steel) or CRCA mounting brackets suitable for safely supporting a 2.0 Ton split air conditioner outdoor unit including positioning the brackets at the designated height, securely anchoring them to the brick/concrete wall using heavy-duty fastener bolts (minimum 4 nos., 10mm to 12mm diameter), providing rubber anti-vibration pads between the AC unit and the bracket to minimize noise and vibration transmission, and applying two coats of anti-corrosive primer followed by synthetic enamel paint and including labour charges all as specified and as directed. |
| 94 | Supply and fixing of sheet metal enclosure duly powder coated double door system MCB distribution box SPN 8 way with 200 Amps bus bar having mounting channel and connection bus bar system including duly fixed on wall with MCBs and making all necessary electrical connection complete all as specified and as directed. |
| 95 | Supply and fixing of MCB SP of rating capacity 6 to 32Amp, 220 Volts AC and making electrical connection etc., complete all as specified and as directed. |
| 96 | Supply and fixing of MCB SPN of rating capacity 40 to 63 Amp, 220V, AC and making electrical connection etc., complete all as specified and as directed. |
| 97 | Supply and fixing of MS metal clad top plug with having two to three pin adaptor for phase & earth system suitable for rating capacity 15 Amp to 20 Amp 220 volt Ac etc., complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 98 | Supply and fixing of MS metal clad top plug with having two to three pin adaptor for phase & earth system suitable for rating capacity 15 Amp to 20 Amp 220 volt Ac etc., complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender