Tender For special Repair To Stn Hq Shopping Complex Loc At Nasirabad Mil Stn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Sep 2026
9 days left
EMD
58500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ajmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Stn Hq Shopping Complex Loc At Nasirabad Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster on stone/brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 2 | M& L for rendering in cement mortar (1:6), 15mm thick on stone masonary surfaces finished fair and even complete all as specified and directed. |
| 3 | M & L for for rendering 15mm thick in CM 1:4 on stone masonry, external surfaces finished fair & even complete all as specified and directed. |
| 4 | M & L for for rendering in cement mortar (1:4) 10mm thick as in ceiling surfaces finished fair and even complete all as specified & directed. |
| 5 | M & L for preparation of newly plastered surface of wall and applying two coats of Distempering with 1st quality acrylic internal distemper having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over 1mm wall care putty and one coat of alkali resistant priming paint, complete all as per manufacturer's specification. |
| 6 | M & L for for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed |
| 7 | M & L for for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed |
| 8 | M & L for complete removal of old plaster surface and preparation of plastered surface of wall and applying two coats of Distempering with 1st quality acrylic internal distemper having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over 1mm wall care putty and one coat of alkali resistant priming paint, complete all as per manufacturer's specification. |
| 9 | M & L for complete removal of old plaster surface and preparation of plaster/rough cast plaster surface applying two coats of 100% Premium acrylic exterier paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 10 | M & L for applying at new plasterd/rough cast palster surface two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 11 | M&L for preparation of new plastered surfaces and applying three coats of white wash complete all as specified and directed |
| 12 | Dismantling loose /disintegrated portion of RCC Chajjas, bend shelves, beams balconies,chimeny and similar work at any position or any height and dobbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces of reinforcement and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed. |
| 13 | Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed. |
| 14 | M & L for for machine cut Kota stone slab flooring 20-25mm thick over 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 15 | M & L for for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing complete all as specified & directed. |
| 16 | M&L for PCC 1:3:6 , type C-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 17 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified |
| 18 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed |
| 19 | M & L for for preparation of New surfaces of kerb stone and applying two coats of synthetic enamel paint of different colour for neat and smooth finishing complete all as specified and as directed. |
| 20 | M & L for for PCC 1:2:4 Type B-1 (using 20mm stone crushed agg.) as in rounded or chamfered on edges in any description complete all as specified. |
| 21 | M & L for glazed ceramic coloured tiles, size 450 mm X 300 mm, 6-7 mm thick on vertical surfaces of wall such as dados, skirting etc set & jointed in neat slurry and pointed in white or colour cement to match over 10 mm thick screed plaster in CM 1:4 complete all as specified and directed |
| 22 | M & L for Non-skid Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured in white or coloured cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6) complete all as specified and directed. |
| 23 | M & L for for 25mm thick PCC 1:2:4 type B-1 (using 20 mm thick crushed stone aggregate) as in sub base complete all as specified and directed. |
| 24 | Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed. |
| 25 | Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed. |
| 26 | M & L for for Random Rubble stone walling uncourses, built in CM (1:6) complete all as specified and directed. |
| 27 | M & L for for Random Rubble stone walling uncourses(but except stone), built in CM (1:6) complete all as specified and directed. |
| 28 | M & L for for brick work with flyash bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 29 | Demolition of Stone slabs & tiles of any description or thickness in floors , aprons etc, complete all as specified and directed. |
| 30 | M & L for 18-20mm thick black granite on door cill, kitchen platform, window cill and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed. |
| 31 | M & L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate 50mm thick as in plinth protection finished fair even laid in alternate bays n.exc 2m in length all as specified and directed. |
| 32 | Taking out old unserviceable water closet (squatt pattern) and S & F Vitreous China, Squatting pan Orissa pattern size 580 x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe , including PCC (1:2:4) type B-1 for fixing of WC and making good the floor to match the existing complete all as specified and directed. |
| 33 | Taking down old unserviceable flushing cistern S & F for PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity . White, with inlet ball valve, float, handle with 32mm PVC flush pipe, fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed. |
| 34 | Taking down old unserviceable PVC connection and S & F PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed |
| 35 | S & F for in repair Soap dish any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as sped & directed. |
| 36 | Taking out old un serviceable tubular towel rail & S & F for tubular towel rail aluminium anodised 20mm dia 'D' type 60cm long between flanges complete all as sped & directed. |
| 37 | S & F for in repairs Chromium plated Angle stop cock 15 mm dia screwed down light pressure screwed both ends for iron pipe or for union complete all as spd & directed |
| 38 | S & F for in repairs Chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed. |
| 39 | S & F for in repairs looking mirror of size 600 x 450 bevelled edge with selected quality glass mounted on 6 mm thick AC bldg board or commercial plywood & fixed to wooden plugs with chromium plated brass screw and cup washers.complete all as specified and directed |
| 40 | Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed. |
| 41 | Taking up or down steel tubing and connection 20 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed. |
| 42 | S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed. |
| 43 | S & F water tubing 20 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed. |
| 44 | M & L for refixing 15mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc. complete all as specified and directed. |
| 45 | M & L for refixing 20mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc. complete all as specified and directed. |
| 46 | S & F for CI Nahani/Floor trap 75 mm outlet,with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) as in repairs complete all as specified and directed. |
| 47 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site complete all as spd & directed and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed. |
| 48 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) all as specified and directed. |
| 49 | M & L for rolled mild steel work angle iron as in door frame (Chowkhats) & cooler stand including provn of 12mm dia deformed bar welded horizontally to bottom of frame confirming to Fe-290 or Fe-330 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed. |
| 50 | S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing using single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed. |
| 51 | S & F factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 146 of SSR Part - II 2004 complete all as specified and directed. |
| 52 | S & F second class HW Hollock/Bonsum/Sal 35mm thick, factory made, plain framed, paneled shutter (Three panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as per specified and directed. |
| 53 | S & F for Steel window/ ventilator glazed and gauged (combination) with side hung/ top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame complete incl necessary AC/Cooler arrangement in window & guard bars incl preparation of new steel surface over 10cm width or grith & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer & incl glass complete all as as specified and directed. |
| 54 | M&L18/19mm thick block board grade-.II quality, interior grade with decorative type with decorative face veneer on one face fixed complete, including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board shutter and similar works all as spepcified and directed. |
| 55 | S & F continuous (piano) hinges, mild steel, bright finish width of flaps (when open ) 40 mm all as specified and directed. |
| 56 | S & F 100mm size hasp and staple, aluminium anodised safety type, fixed with screws complete all as specified and directed. |
| 57 | S & F 300mm long aluminium alloy,anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 58 | S & F extruded aluminium handle fabricated type, anodised 150mm size conforming to IS complete all as specified and directed. |
| 59 | S & F for aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed. |
| 60 | S & F for stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with wire staples complete all as specified & directed. |
| 61 | S & F for 3.00 mm thick sheet glass, ordinary / figured quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as specified & directed. |
| 62 | Dismantling of existing unserviceable water tank of any description capacity each complete all as specified and directed |
| 63 | S& F rotational moulded synthetic (HDPE) water storage tank 1000 litre capacity hoisted & fixed in position all as specified in SSR Part-I complete all as specified & directed. |
| 64 | S & F for ball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 20mm bore compete (Minimum weight 210 gm) complete all as specified & directed. |
| 65 | S & F for in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 25 mm dia, ISI marked complete all as specified & directed. |
| 66 | M & L for 50 mm thick sand stone slabs; set and jointed over joists etc. in CM 1:4 as in base of water tank and M & L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm stone crushed agg.) finished concrete surfaces even & smooth complete all as specified and directed |
| 67 | Taking out of old grill & M & L framed work such as grills, gratings, etc, with ends of bars shouledered and /or reiveted ,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work coforming to Fe 290m Gde E-165 complete all as spd and directed. |
| 68 | M & L for for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in surface channel and drain etc complete all as specified. |
| 69 | Taking down CI pipe 100/75 mm fixed wall and floor etc including accessories complete all as specified and directed. |
| 70 | S & F for in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 71 | S & F 75mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed. |
| 72 | S & F110mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed. |
| 73 | S & F for in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 74 | S & F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed |
| 75 | S & F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed |
| 76 | S & F for only stack clamp out of 50mm by 5mm flat iron and 16 mm dia round iron stays fixed to pipe of bore 100mm complete all as specified. |
| 77 | Taking down old unserviceable WHB and S & F for wash hand basin vitreous china white /colour flat size 550 x 400mm fixed including waste coupling, waste pipe ,complete all as specified and directed. (Cat Part No - 4653 Prayag & equivalent of Johnson, Cera and Parryeare) |
| 78 | S & F for in repairs pillar taps fancy type cast copper allloy capston headed, chromium plated, screwed down, high pressure with long screwedshank and fly nut, screwed for 15mm bore iron pipe complete all as specified. |
| 79 | Fabrication & fitting of kitchen with cabinet/shelves & wardrobe/cupboard made out of 18mm thick (one side decorative lamination & other side baancing lamination) PVC sheet with piano hinges including providing cabinet for keeping baskets / cutlery baskket with handles/door shutters complete all as specified and directed.Note :- PVC sheet, fitting & fixture will be measured and paid separately as supply only. |
| 80 | Supply only in repairs 18mm thick (one side decorative lamination & other side baancing lamination) solid PVC board with cement solvent adhesive for shutter/kitchen cabinet / cup board/partition wall/ wall cabinet complete all as specified and directed. Make :- Raj shree or equivalent as approved by GE. |
| 81 | Supply only 125 mm dia oval shape brass handle fancy type bright finish complete all as specified & directed. |
| 82 | M & L for cutting of RCC Chajja of any thickness and any width complete all as spepcified and directed. |
| 83 | M & L for Cleaning of sewage line by roding manhole to manhole, manually, removing sludge/foreign material completely and making smooth flow of sewage water for any dia bore pipes complete all as specified & directed. Please Enable Macros to View BoQ information |
| 84 | M & L for Cleaning of sewage line by roding manhole to manhole, manually, removing sludge/foreign material completely and making smooth flow of sewage water for any dia bore pipes complete all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender