Tender For special Repair To Boundary Wall And Girth Plaster From Walong Dwar To Inf Museum Chowk At Mall Road Under Ge (Mis) Mhow
Tender Value
43.55 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
9 days left
EMD
87500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Boundary Wall And Girth Plaster From Walong Dwar To Inf Museum Chowk At Mall Road Under Ge (Mis) Mhow
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 2 | M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1cement: 1/2 coarse sand : 2 marble stone chipping 10mm nominal size) & marble dust in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed.Note:- Payment for providing grooves shall measured and paid seperately & Colour and pattern of grit plaster should be approved by GE. |
| 3 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. |
| 4 | Demolition of brick work built in cement mortar including all quions, arcches, pillars etc complete all as specified and as directed. |
| 5 | M&L brick work in CM ( 1:6 ) with using sub class `B ` modular brick straight or curved on plan exceeding 6.0mtr mean radius complete all as specified and directed. |
| 6 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel or drain or benching in manhole complete all as specified and directed. |
| 8 | M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in coping, edging including necessary form work complete all as specified and directed. |
| 9 | M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and directed. |
| 10 | M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed. |
| 11 | M&L for providing & fixing in repair precast cement concrete louvers and jallies 50mm thick (measured solid), type B0 1:2:4 (12.5mm graded stone aggregate) set in cement mortar (1:4) including all moldings but excluding frame complete all as specified and as directed. |
| 12 | M&L for 18- 20 mm thick Granite slab work (table rubbed and polish) of approved quality of required size in floor, wall, cooking platform and like bedded and jointed in grey cement slurry and pointed with coloured cement (1:2) usig marble dust with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in cement mortar 1:6 including polishing by using mechanical grinder complete all as specified and directed. |
| 13 | M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor, etc complete all as specified and directed. |
| 14 | M&L for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand complete all as specified and as directed. |
| 15 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 16 | M&L for moorum / red bajri filling in floors or pavings, laid in layers nexc 15cm thick, spread, levelled and rammed including waterring and consolidation complete all as specified and directed. |
| 17 | M&L for hardcore of gauge n exc. 63 mm,of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 18 | M&L for use and waste of formwork to soffits of beam and bends and similar work, not exceeding 200mm thick (horizontal or sloping) etc rough finished surface of concrete complete all as specified and directed. |
| 19 | M&L for TMT bars 6 mm dia and over upto 10mm cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified and directed. |
| 20 | M&L for RCC M-20 grade concrete (Nominal Mix) using 20 mm graded stone aggregate as in bends, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc complete all as specified and directed.NOTE : Reinforcement shall be measured and paid separately under relevant item. |
| 21 | S&F in repairs Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts,including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed (each line wire to be measured). |
| 22 | M&L for Preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide by spray/mechanical complete all as specified and directed. |
| 23 | S&F concertina coil with punched tape 600 mm dia with wire diameter 2.6 mm and razor size 15mmx12mmx0.5mm, spacing of blade 26mm, fixed on angle iron frames over RCC or brick post/wall including securing or tying at crossing with and provision of galvanised mild steel wire, staple or steel pins etc complete all as specified and as directed. The razor tape should have minimum galvanised coating thickness 12 microns (both side inclusive). The concertina coil should have as per relevant IS and should be hot dip galvanised coated with CLR anticorrosive paint by making diamond shape with the help of dove tail clips (18 SWG) fixed over razor wire with the help of hug ringes (14 SWG) complete all as directed by Engr-in-Charge. |
| 24 | M&L for mild steel work as posts and struts in fencing including cutting tops as required drilling holes, notching for wires etc and similar works conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender