Tender For Repairs To External Water Supply Pipe Line, Pumps/Motors, Starters And Connected Items At installation Parundu And 7N Det Under Ge Tirunelveli (Tender Id:2026_Mes_784595_1)
Tender Value
25 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
12 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramanathapuram → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To External Water Supply Pipe Line, Pumps/Motors, Starters And Connected Items At installation Parundu And 7N Det Under Ge Tirunelveli (Tender Id:2026_Mes_784595_1)
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for laying pipe.or excavation in pits not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in any type of soil, complete all as specified and as directed by Engr-in - charge. |
| 2 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in any type of soil, complete all as specified and as directed by Engr-in - charge. |
| 3 | Removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by Engr-in - charge. |
| 4 | Material & Labour for taking down bore steel tubing and connections, removal from site for taking into credit complete all as specified and as directed by the Engineer-in-Charge of following bore sizes:- |
| 5 | (a) 20 mm bore steel tubing |
| 6 | (b) 25 mm to 32 mm bore steel tubing |
| 7 | (c) 40 mm to 50 mm bore steel tubing |
| 8 | (d) 80 mm bore steel tubing |
| 9 | Supply and fix GI tubing medium grade including provision of necessary fittings like Tee,Bend,Socket,Elbow, Short pieces connectors, plugs, unions, etc and accessories laid in trenches all as specified and directed by Engineer-in-Charge of following bore sizes:- |
| 10 | (b) 25 mm bore steel tubing |
| 11 | (c) 40 mm bore steel tubing |
| 12 | (d) 50 mm bore steel tubing |
| 13 | (e) 80 mm bore steel tubing |
| 14 | Supply and Fixing GI tubing medium grade including provision of fittings like Tee,Bend,Socket,Elbow, Short pieces connectors, plugs, unions, etc and accessories on walls/roofs all as specified and directed by Engineer-in-Charge of following bore sizes:- |
| 15 | (a) 20 mm bore steel tubing |
| 16 | (b) 25 mm bore steel tubing |
| 17 | (c) 40 mm bore steel tubing |
| 18 | (d) 50 mm bore steel tubing |
| 19 | Testing the potable water samples at the district water testing lab complete all as specified and directed. |
| 20 | Testing the raw water samples at the district water testing lab complete all as specified and directed. |
| 21 | Testing the mixing of raw water and potable water samples at the district water testing lab complete all as specified and directed. |
| 22 | Supply & Fixing of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2, for iron pipe of following sizes complete all as specified and directed. |
| 23 | (a) 20 mm bore steel tubing |
| 24 | (b) 25 mm bore steel tubing |
| 25 | (c) 32 mm bore steel tubing |
| 26 | (d) 40 mm bore steel tubing |
| 27 | (e) 50 mm bore steel tubing |
| 28 | Supply and fix in repair brass float valve, ISI marked high pressure with polythene float and fly nut complete, screwed of following size / bore including necessary GI fittings such as elbow, reducer, nipple etc.complete all as specified and as directed by Engr-in - charge. |
| 29 | (a) 20 mm dia |
| 30 | (b) 25 mm dia |
| 31 | (c) 40 mm dia |
| 32 | (d) 50 mm dia |
| 33 | Supply and fix Pressure gauge 5\\" dia, 0 to 14 Kg/cm2 range fixing on delivery pipe of pump set and removing existing defective pressure gauge and taken as credit complete all as specified and as directed. |
| 34 | Supply and fix sluice valves flanged end, cast iron body, flanged and drilled and non rising type stainless steel spindle with nut, long body, class P N 1.6, conforming to IS 14846 of 2000 for following sizes including all flange joint with rubber or fiber board, bolts, nuts and washers complete including pumping out accumulated water all as specified and directed by Eng-in-Charge of following sizes. |
| 35 | (a) Sluice Valve, Class PN 1.6, 63mm dia |
| 36 | (b) Sluice Valve, Class PN 1.6, 80mm dia |
| 37 | (c) Non Return Sluice Valve, 40mm dia |
| 38 | Supply and fix Foot Valve screwed / flanged including necessary fittings like connecting flanges of following sizes.complete all as specified and as directed by Engr-in - charge. |
| 39 | (a) Foot Valve 50 mm dia |
| 40 | (b) Foot Valve 63 mm dia |
| 41 | (c) Foot Valve 80 mm dia |
| 42 | Replacement of GI flange having holes (ISI marked) suitable for following bore pipe including joinery material such as rubber gasket bolt units and washers etc in place of unserviceable all as directed. |
| 43 | (a) 40 mm bore pipe |
| 44 | (b) 50 mm bore pipe |
| 45 | (c) 80 mm bore pipe |
| 46 | Replacement of GI union of both end lock nut screwed with leak proof washer connected to existing GI tubing of following bore in place of unserviceable complete all as specified and as directed by Engr-in - charge. |
| 47 | (a) 20 mm bore pipe |
| 48 | (b) 25 mm bore pipe |
| 49 | (c) 40 mm bore pipe |
| 50 | (d) 50 mm bore pipe |
| 51 | Material and labour for by scraping / cleaning with wire brushes to remove the old painting from pump, motor, coupling guard, MS common base frame and painting with two coats of synthetic enamel paint of approved quality over a coat of red oxide primer as specified below here in after for 1 / 2 / 3 & 5 HP pumping sets:- (a) Motor and pump - Smoke Grey colour (b) Coupling guard and motor air grill - Post office Red colour.(c) Common base frame - Black colour (d) Suction line and delivery line in side pump house for fresh water pipe lines - Navy blue colour. (e) Writing SM/MES No 25 mm wide in white colour on motor and pump.complete all as specified and as directed by Engr-in - charge. |
| 52 | Taking down defective mono block / Centrifugal pump set from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling/greasing, lubricating the parts includng repair / replacement of worn out parts and replacement of base foundation nuts and bolts and re-installing ,necessary electrical connection and testing for satisfactory performance complete all as specified and directed by Engineer - in - Charge. for electric driven pump set of 2.0 HP capacity Note:- (i) The rate quoted for this item shall includes labour charge only for maint repair and replacement of defective/UNSV spares/accessories. Spares are to measured and paid separately under subsequent items. (ii) Cost of other minor items/spares such as nut, bolts washers, gaskets, etc which are not covered under Schedule 'A' but required for effective functioning of the plant shall be deemed to included in this item. (ii) The cost of spares shall be paid under relevant items given below (iii) In case of any damage to the pipes during the time of removal of the pump set ,contractor shall be responsible for repairing the same without any extra cost to the government. |
| 53 | (a) Rewinding of motor coil complete as per IS-396 of 1953 using super enameled copper wire of adequate gauge and weight including replacement of all insulation material and terminal lead for power supply and other petty items required for making motor functional |
| 54 | (b) Supply only Ball bearings (drive and non drive end) |
| 55 | (c)Supply only Electro dynamically balanced bronze impeller |
| 56 | (d) Supply only Water Seal |
| 57 | (e) Supply only Condenser suitable capacity / MFD |
| 58 | (f) Supply only impeller key |
| 59 | All as per item No :18 herein before but pump set of capacity 3.0 HP complete all as specified and as directed by Engr-in - charge. Note: The cost of spares shall be paid under relevant items given below as \\" Supply only\\". |
| 60 | (a) Rewinding of motor coil complete as per IS-396 of 1953 using super enameled copper wire of adequate gauge and weight including replacement of all insulation material and terminal lead for power supply and other petty items required for making motor functional |
| 61 | (b) Supply only Ball bearings (drive and non drive end) |
| 62 | (c)Supply only Electro dynamically balanced bronze impeller |
| 63 | (d) Supply only Water Seal |
| 64 | (e) Supply only Condenser suitable capacity / MFD |
| 65 | (f) Supply only Shaft mild steel |
| 66 | (g) Supply only Shaft coupling |
| 67 | (h) Supply only chlorine test kit Please Enable Macros to View BoQ information |
| 68 | (h) Supply only chlorine test kit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender